Operation ACCESSORY

[Pages:2]Operation u When first turning on the app you will enter the Control Hub (or

System Name you gave) Selection window. Simply tap your Control Hub to enter.

v The Status screen will appear. Here you can control the connected devices as well as access the Scenario, Event and Setting's screens.

For detailed installation and setup and to view the ALC 1 Year Limited Warranty, please refer to the complete Connect Series User's Guide available on our website: support

SCAN

TO VIEW COMPLETE USER'S GUIDE

Home Security Anytime from Anywhere

ACCESSORY

Compatible with ALC AHS613, AHS616, and AHS629 Security Systems

Motion Detector

Quick

Quick

Simple Set Up

Model: AHSS31

QUICK START GUIDE

Please read these instructions completely before operating this product.

Installation

For first time use, batteries are pre-installed (3 AA batteries 3). Apply the double-sided tape to the rear of the Motion Detector as shown. Use the thick tape for flat wall mount or the thin table for corner mounting. Select a location between 2-2.5 meters (6-8 ft) from the floor.

50 feet

110 degrees detection angle

6 to 8 feet

This Motion Detector is an accessory to be used along with the Connect series Control Hub Kit. Please refer to this quick start guide as well as the Connect series owner's manual, see back cover for details.

Pairing

IMPORTANT: This device needs to be paired with the Control Hub as follows.

u Since this device is an added accessory, you should have downloaded the Connect App and installed the ALC Control Hub as described in the Connect Series owner's manual.

v At the Status screeBn, tap +.

A

w Remove the insulating plastic tab then open the detector by pressing the tab at the bottom. Press the Pair button.

x Tap Motion Detector. Tap Pair and follow the on screen instructions. At the final screen, enter the Motion Detector's name and location and tap Save.

Trouble Pairing? If it did not detect the detector, remove the battery for 5 seconds and press the Pair button again. Repeat step 4.

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download