Commodity IFB Template - Government of New York
State of New York Executive DepartmentOffice of General Services – New York State ProcurementCorning Tower - 38th FloorEmpire State PlazaAlbany, NY 12242GROUP 33713 READY-MIXED CONCRETE – INVITATION FOR BIDS #22534BID OPENING DATE: JANUARY 9, 2014 at 11:00 AMTERMS AND CONDITIONSGENERAL INFORMATIONNOTICE TO BIDDERS2NON-COLLUSIVE BIDDING CERTIFICATION3SUMMARY OF POLICY & PROHIBITIONS ON PROCUREMENT LOBBYING3INQUIRIES/ISSUING OFFICE3ELECTRONIC BID OPENING RESULTS3DISPUTE RESOLUTION POLICY4DEBRIEFING4CONTRACT BILLINGS AND PAYMENTS4APPENDIX A; APPENDIX B5CONFLICT OF TERMS AND CONDITIONS5NEW YORK STATE VENDOR FILE REGISTRATION5NYS VENDOR RESPONSIBILITY QUESTIONNAIRE FOR-PROFIT BUSINESS ENTITY6TAX LAW 5-A AMENDED APRIL 26, 2006 (APPENDIX 2) 7USE OF RECYCLED MATERIALS7CONTRACTOR’S INSURANCE REQUIREMENTS8-11CONTRACTOR REQUIREMENTS FOR MINORITY/WOMEN-OWNED BUSINESSES12EQUAL EMPLOYMENT OPPORTUNITY STAFFING PLAN13-15MERCURY-ADDED CONSUMER PRODUCTS16DIESEL EMISSION REDUCTION ACT16IRAN DIVESTMENT ACT16INSTRUCTIONS FOR SUBMITTING BID ON ELECTRONIC MEDIA17-18SCOPE (BID SYNOPSIS)19PRICE19MINIMUM ORDER20SURCHARGE FOR SMALL SIZE ORDERS20QUALIFICATION OF BIDDER20DELIVERY AFTER RECEIPT OF PURCHASE ORDER (ARO)20PRICE CALCULATION WORKSHEET20QUICK QUOTE20-21METHOD OF AWARD21METHOD OF ORDERING21PURCHASE ORDERS AND INVOICING22DELIVERY22CONTRACT PAYMENTS22NON-STATE AGENCIES PARTICIPATION IN CENTRALIZED CONTRACTS22EXTENSION OF USE22ESTIMATED QUANTITIES23NEW YORK STATE PROCUREMENT CARD23CONTRACT PERIOD AND RENEWALS23SHORT TERM EXTENSION23CANCELLATION FOR CONVENIENCE23CONTRACT MIGRATION23EMERGENCY PURCHASING23"OGS OR LESS" GUIDELINES APPLY TO THIS CONTRACT24REPORT OF CONTRACT PURCHASES24DETAILED SPECIFICATIONS25-26BID SUBMISSION CHECK-OFF SHEET27APPENDIX 2 - CONTRACTOR CERTIFICATION ST-220 TAX FORMS28-34GENERAL INFORMATIONIMPORTANT NOTICE TO POTENTIAL BIDDERS: Receipt of these bid documents does not indicate that the Office of General Services' New York State Procurement has pre-determined your company's qualifications to receive a contract award. Such determination will be made after the bid opening and will be based on our evaluation of your bid submission compared to the specific requirements and qualifications contained in these bid documents.NOTICE TO BIDDERS:The Commissioner of General Services will receive bids pursuant to the provisions of Article XI of the State Finance Law or the provisions of the State Printing and Public Documents Law. The following procedures shall be used for bid submittals:1.BID PREPARATIONPrepare your bid on this form using indelible ink. Print the name of your company on each page of the bid in the block provided. One copy of the bid is required, unless otherwise specified herein.2.BID DEVIATIONSIf your bid differs from the specifications explain such deviation(s) or qualification(s); and if necessary, attach a separate sheet. See “Extraneous Terms” in Appendix B, OGS General Specifications.3.BID DELIVERYBidders assume all risks for timely, properly submitted deliveries. Bidders are strongly encouraged to arrange for delivery of bids to OGS prior to the date of the bid opening. LATE BIDS may be rejected. E-mail bid submissions are not acceptable and will not be considered. Bid envelopes and packagesAn envelope and/or package containing a bid should be clearly marked "BID ENCLOSED" and should state the Bid Number, Bid Opening Date, and Time. Failure to complete all information on the bid envelope and/or packages may necessitate the premature opening of the bid and may compromise confidentiality. See "Bid Submission" in Appendix B, OGS General Specifications. Bids shall be delivered to:State of New York Executive DepartmentOffice of General ServicesNew York State ProcurementCorning Tower - 38th Floor Reception DeskEmpire State PlazaAlbany, NY 12242FAX transmittalsFacsimile transmittals are NOT acceptable for this solicitation. Hand deliveries Bidders must allow extra time to comply with the security procedures in effect at the Empire State Plaza when hand delivering bids or using deliveries by independent courier services. Bidders assume all risks for timely, properly submitted deliveries.4.IMPORTANT BUILDING ACCESS PROCEDURES To access the Corning Tower, all visitors must check in by presenting photo identification at the information desk. Bidders attending bid openings are encouraged to pre-register for building access by contacting New York State Procurement’s (NYSPro) receptionist at 518-474-6262 at least 24 hours prior to the bid opening. Visitors who are registered can check in directly with the Information Desk. Visitors who are not pre-registered will be directed to a designated phone to call the NYSPro Receptionist. The Receptionist will register the visitor at that time but delays may occur. Vendors who intend to deliver bids or conduct NYSPro business should allow extra time to comply with these procedures. Building Access procedures may change or be modified at any time. GENERAL INFORMATION (Cont’d)NON-COLLUSIVE BIDDING CERTIFICATION:(Reference: State Finance Law Section 139-d and Appendix A, Clause 7)By submission of this bid, each bidder and each person signing on behalf of any bidder certifies, and in the case of a joint bid each party thereto certifies as to its own organization, under penalty of perjury, that to the best of its knowledge and belief:(1) The prices in this bid have been arrived at independently without collusion, consultation, communication, or agreement, for the purpose of restricting competition, as to any matter relating to such prices with any other bidder or with any competitor;(2) Unless otherwise required by law, the prices which have been quoted in this bid have not been knowingly disclosed by the bidder and will not knowingly be disclosed by the bidder prior to opening, directly or indirectly, to any other bidder or to any competitor; and(3) No attempt has been made or will be made by the bidder to induce any other person, partnership or corporation to submit or not submit a bid for the purpose of restricting competition. In the event that the bidder is unable to certify as stated above, the bidder shall provide a signed statement which sets forth in detail the reasons why the bidder is unable to furnish the certificate as required in accordance with State Finance law Section 139-d(1)(b).SUMMARY OF POLICY AND PROHIBITIONS ON PROCUREMENT LOBBYING:Pursuant to State Finance Law §§139-j and 139-k, this solicitation includes and imposes certain restrictions on communications between OGS and an Offerer/bidder during the procurement process. An Offerer/bidder is restricted from making contacts from the earliest notice of intent to solicit offers/bids through final award and approval of the Procurement Contract by OGS and, if applicable, the Office of the State Comptroller (“restricted period”) to other than designated staff unless it is a contact that is included among certain statutory exceptions set forth in State Finance Law §139-j (3) (a). Designated staff, as of the date hereof, is identified on the first page of this solicitation. OGS employees are also required to obtain certain information when contacted during the restricted period and make a determination of the responsibility of the Offerer/bidder pursuant to these two statutes. Certain findings of non-responsibility can result in rejection for contract award and in the event of two findings within a four-year period, the Offerer/bidder is debarred from obtaining governmental Procurement Contracts. Further information about these requirements can be found on the OGS web site .INQUIRIES/ISSUING OFFICE:All inquiries concerning this specification will be addressed to the following NYSPro designated contact(s) and issuing office:PRIMARY CONTACTMarcos Ortiz, CMS INYS ProcurementCorning Tower - 37th FloorEmpire State PlazaAlbany, New York 12242Phone: 518-474-1557marcos.ortiz@ogs.SECONDARY CONTACTJosé DeAndres, CMS INYS ProcurementCorning Tower - 37th FloorEmpire State PlazaAlbany, New York 12242Phone: 518-474-3024jose.deandres@ogs.SECONDARY CONTACTJoseph Hodder, Team LeaderNYS ProcurementCorning Tower - 37th FloorEmpire State PlazaAlbany, New York 12242Phone: 518-474-3668joseph.hodder@ogs.TERTIARY CONTACTBruce Hallenbeck, Asst. Dir.NYS ProcurementCorning Tower - 37th FloorEmpire State PlazaAlbany, New York 12242Phone: 518/408-1705bruce.hallenbeck@ogs.All questions should be submitted in writing no later than one week prior to the bid opening, citing the particular bid section and paragraph number. The prospective bidder should notify the DESIGNATED CONTACT of any term, condition, etc., that precludes the vendor from submitting a compliant, responsive bid. Bidders are cautioned to read this document thoroughly to become familiar with all aspects of the bid. Prospective Bidders should note that all clarifications and exceptions including those relating to the terms and conditions of the contract are to be resolved prior to the submission of a bid. Bidders entering into a contract with the State are expected to comply with all the terms and conditions contained herein. Answers to all questions of a substantive nature will be given to all Prospective Bidders in the form of a formal addendum which will become part of the ensuing contract.ELECTRONIC BID OPENING RESULTSNew York State Procurement posts bid prices on the OGS/NYSPro web page. The web page makes available bid tabulations (i.e., photocopies of price pages or spreadsheets) received by NYSPro for scheduled bid openings. Such information is anticipated to be available online within two business days after the bid opening. The Bid Opening Results Page is available at: INFORMATION (Cont’d)DISPUTE RESOLUTION POLICY:It is the policy of the Office of General Services’ New York State Procurement (NYSPro) to provide vendors with an opportunity to administratively resolve disputes, complaints or inquiries related to NYSPro bid solicitations or contract awards. NYSPro encourages vendors to seek resolution of disputes through consultation with NYSPro staff. All such matters will be accorded impartial and timely consideration. Interested parties may also file formal written disputes. A copy of NYSPro’s Dispute Resolution Procedures for Vendors may be obtained by contacting the person shown on the front of this Invitation for Bids or through the OGS website (ogs.). DEBRIEFING:A bidder shall be accorded fair and equal treatment with respect to its opportunity for debriefing. Prior to contract award, OGS shall, upon request, provide a debriefing which would be limited to review of that bidder’s proposal or bid. After contract award, OGS shall, upon request, provide a debriefing to any unsuccessful bidder that responded to the solicitation, regarding the reason that the proposal or bid submitted by such bidder was not selected for a contract award. The post-award debriefing should be requested in writing within 30 days of posting of the contract award on the OGS web site.CONTRACT BILLINGS AND PAYMENTS:a.Billings. Contractor and the dealers/distributors/resellers designated by the Contractor, if any, shall provide complete and accurate billing invoices to each Authorized User in order to receive payment. Billing invoices submitted to an Authorized User must contain all information required by the Contract and the State Comptroller or other appropriate fiscal officer. Submission of an invoice and payment thereof shall not preclude the Commissioner from requesting reimbursement or demanding a price adjustment in any case where the Product delivered is found to deviate from the terms and conditions of the Contract or where the billing was inaccurate.Contractor shall provide, upon request of the Commissioner, any and all information necessary to verify the accuracy of the billings. Such information shall be provided in the format requested by the Commissioner and in a media commercially available from the Contractor. The Commissioner may direct the Contractor to provide the information to the State Comptroller or to any Authorized User of the Contract.b.Payment of Contract purchases made by an Authorized User when the State Comptroller is responsible for issuing such payment. The Authorized User and Contractor agree that payments for invoices submitted by the Contractor shall only be rendered electronically unless payment by paper check is expressly authorized by the Commissioner, in the Commissioner’s sole discretion, due to extenuating circumstances. Such electronic payments shall be made in accordance with ordinary State procedures and practices. The Contractor shall comply with the State Comptroller’s procedures to authorize electronic payments. Authorization forms are available at the State Comptroller website at osc.state.ny.us, by e-mail at epunit@osc.state.ny.us, or by telephone at 518-486-1255. Contractor acknowledges that it will not receive payment on any invoices submitted under this Contract that are payable by the State Comptroller if it does not comply with the State Comptroller’s electronic payment procedures, except where the Commissioner has expressly authorized payment by paper check as set forth above. c.Payment of Contract purchases made by an Authorized User when the State Comptroller is not responsible for issuing such payment. The Authorized User and Contractor agree that payments for such Contract purchases shall be billed directly by Contractor on invoices/vouchers, together with complete and accurate supporting documentation as required by the Authorized User. Such payments shall be as mandated by the appropriate governing law from the receipt of a proper invoice. Such Authorized User and Contractor are strongly encouraged to establish electronic payments.GENERAL INFORMATION (Cont’d)APPENDIX A:Appendix A, Standard Clauses For New York State Contracts, dated December?2012, attached hereto, is hereby expressly made a part of this Bid Document as fully as if set forth at length herein. Please retain this document for future reference and do not return to OGS as part of the Bid submission.Note: On March 30, 2012, Chapter 55 of the Laws of 2012 was signed into law by Governor Cuomo, amending State Finance Law section 112 to create an exception for contracts established as a centralized contract through OGS, and purchase orders or other procurement transactions issued under such centralized contracts, from the Office of the State Comptroller pre-approval and filing requirements. This amendment is not currently reflected in Appendix A. The statutory provisions govern over the contractual language.APPENDIX B:Appendix B, Office of General Services General Specifications, dated July?2006, attached hereto, is hereby expressly made a part of this Bid Document as fully as if set forth at length herein and shall govern any situations not covered by this Bid Document or Appendix A. Please retain this document for future reference and do not return to OGS as part of the Bid submission.CONFLICT OF TERMS AND CONDITIONS:Unless otherwise set forth in the procurement or contract documents, conflicts among documents shall be resolved in the following order of precedence:a.Appendix A (Standard Clauses For NYS Contracts)b.This Invitation For Bidsc.Appendix B (General Specifications)d.Bidder’s BidNEW YORK STATE VENDOR FILE REGISTRATION:Prior to being awarded a contract pursuant to this Solicitation, the Bidder(s) and any designated authorized resellers who accept payment directly from the State, must be registered in the New York State Vendor File (Vendor File) administered by the Office of the State Comptroller (OSC). This is a central registry for all vendors who do business with New York State Agencies and the registration must be initiated by a State Agency. Following the initial registration, unique New York State ten-digit vendor identification numbers will be assigned to your company and to each of your authorized resellers (if any) for usage on all future transactions with New York State. Additionally, the Vendor File enables vendors to use the Vendor Self-Service application to manage all vendor information in one central location for all transactions related to the State of New York. If Bidder is already registered in the New York State Vendor File, list the ten-digit vendor id number on the first page of this bid document. Authorized resellers already registered should list the ten-digit vendor id number along with the authorized reseller information. If the Bidder is not currently registered in the Vendor File, complete the enclosed OSC Substitute W-9 Form and submit it with your bid. In addition, if authorized resellers are to be used, an OSC Substitute W-9 form should be completed by each of the designated authorized resellers and submitted to the Office of General Services. The Office of General Services will initiate the vendor registration process for all Bidders recommended for Contract Award and their authorized resellers. Once the process is initiated, registrants will receive an email from OSC that includes the unique ten-digit vendor identification number assigned to the company and instructions on how to enroll in the online Vendor Self-Service application. For more information on the vendor file please visit the following website: GENERAL INFORMATION (Cont’d)NEW YORK STATE VENDOR RESPONSIBILITY QUESTIONNAIRE FOR-PROFIT BUSINESS ENTITY(hereinafter the “Questionnaire”)OGS conducts a review of prospective contractors (“Bidders”) to provide reasonable assurances that the Bidder is responsive and responsible. A Questionnaire is used for non-construction contracts and is designed to provide information to assess a Bidder’s responsibility to conduct business in New York based upon financial and organizational capacity, legal authority, business integrity, and past performance history. By submitting a bid, Bidder agrees to fully and accurately complete the “Questionnaire.” The Bidder further agrees that if it is found by the State that the Bidder’s responses to the Questionnaire were intentionally false or intentionally incomplete, on such finding, OGS may terminate the Contract. The Bidder acknowledges that the State’s execution of the Contract will be contingent upon the State’s determination that the Bidder is responsible, and that the State will be relying upon the Bidder’s responses to the Questionnaire when making its responsibility determination.OGS recommends each Bidder file the required Questionnaire online via the New York State VendRep System. To enroll in and use the VendRep System, please refer to the VendRep System Instructions and User Support for Vendors available at the Office of the State Comptroller’s (OSC) web site, or to enroll, go directly to the VendRep System online at provides direct support for the VendRep System through user assistance, documents, online help, and a help desk. The OSC Help Desk contact information is located at . Bidders opting to complete the paper questionnaire can access this form and associated definitions via the OSC web site at . In order to assist the State in determining the responsibility of the Bidder prior to Contract Award, the Bidder must complete and certify (or recertify) the Questionnaire no more than six (6) months prior to the bid due date. A Bidder’s Questionnaire cannot be viewed by OGS until the Bidder has certified the Questionnaire. It is recommended that all Bidders become familiar with all of the requirements of the Questionnaire in advance of the bid opening to provide sufficient time to complete the Questionnaire.NOTE: A New York State Vendor File Registry Number is required to access the VendRep site (see previous clause). Bidders who do not have an assigned NYS Vendor File Registration Number must submit a hard copy paper questionnaire with their bid. The Bidder agrees that if it is awarded a Contract the following shall apply: The Contractor shall at all times during the Contract term remain responsible. The Contractor agrees, if requested by the Commissioner of OGS or her designee, to present evidence of its continuing legal authority to do business in New York State, integrity, experience, ability, prior performance, and organizational and financial capacity.The Commissioner of OGS or her designee, her sole discretion, reserves the right to suspend any or all activities under this Contract, at any time, when she discovers information that calls into question the responsibility of the Contractor. In the event of such suspension, the Contractor will be given written notice outlining the particulars of such suspension. Upon issuance of such notice, the Contractor must comply with the terms of the suspension order. Contract activity may resume at such time as the Commissioner of OGS or her designee issues a written notice authorizing a resumption of performance under the Contract.Upon written notice to the Contractor, and a reasonable opportunity to be heard with appropriate OGS officials or staff, the Contract may be terminated by the Commissioner of OGS or her designee at the Contractor’s expense where the Contractor is determined by the Commissioner of OGS or her designee to be non-responsible. In such event, the Commissioner of OGS or her designee may complete the contractual requirements in any manner he or she may deem advisable and pursue available legal or equitable remedies for breach.In no case shall such termination of the Contract by the State be deemed a breach thereof, nor shall the State be liable for any damages for lost profits or otherwise, which may be sustained by the Contractor as a result of such termination.GENERAL INFORMATION (Cont’d)TAX LAW 5-A AMENDED APRIL 26, 2006 (APPENDIX 2)Section 5-a of the Tax Law, as amended, effective April 26, 2006, requires certain contractors awarded state contracts for commodities, services and technology valued at more than $100,000 to certify to the Department of Taxation and Finance (DTF) that they are registered to collect New York State and local sales and compensating use taxes. The law applies to contracts where the total amount of such contractors’ sales delivered into New York State are in excess of $300,000 for the four quarterly periods immediately preceding the quarterly period in which the certification is made, and with respect to any affiliates and subcontractors whose sales delivered into New York State exceeded $300,000 for the four quarterly periods immediately preceding the quarterly period in which the certification is made. This law imposes upon certain contractors the obligation to certify whether or not the contractor, its affiliates, and its subcontractors are required to register to collect state sales and compensating use tax and contractors must certify to DTF that each affiliate and subcontractor exceeding such sales threshold is registered with DTF to collect New York State and local sales and compensating use taxes. The law prohibits the State Comptroller, or other approving agency, from approving a contract awarded to a contractor meeting the registration requirements but who is not so registered in accordance with the law. Contractor certification forms and instructions for completing the forms are attached to this bid. Form No. ST-220-TD must be filed with and returned directly to DTF. Unless the information upon which the ST-220-TD is based changes, this form only needs to be filed once with DTF. If the information changes for the contractor, its affiliate(s), or its subcontractor(s), a new Form No. ST-220-TD must be filed with DTF. Form ST-220-CA must be filed with the bid and submitted to the procuring covered agency certifying that the contractor filed the ST-220-TD with DTF. Proposed contractors should complete and return the certification forms within two business days of request (if the forms are not completed and returned with bid submission). Failure to make either of these filings may render a bidder non-responsive and non-responsible. Bidders shall take the necessary steps to provide properly certified forms within a timely manner to ensure compliance with the law. Vendors may call DTF at 1-800-698-2909 for any and all questions relating to Section 5-a of the Tax Law and relating to a company's registration status with the DTF. For additional information and frequently asked questions, please refer to the DTF web site: . USE OF RECYCLED OR REMANUFACTURED MATERIALS:New York State, as a member of the Council of Great Lakes Governors, supports and encourages vendors to use recycled, remanufactured or recovered materials in the manufacture of products and packaging to the maximum extent practicable without jeopardizing the performance or intended end use of the product or packaging unless such use is precluded due to health or safety requirements or product specifications contained herein. Refurbished or remanufactured components or products are required to be restored to original performance and regulatory standards and functions and are required to meet all other requirements of this bid solicitation. Warranties on refurbished or remanufactured components or products must be identical to the manufacturer's new equipment warranty or industry's normal warranty when remanufacturer does not offer new equipment. See "Remanufactured, Recycled, Recyclable or Recovered Materials" in Appendix B, OGS General Specifications.GENERAL INFORMATION (Cont’d)CONTRACTOR’S INSURANCE REQUIREMENTS:Upon tentative award, Bidder shall be required to procure at its sole cost and expense all required insurance. The Contractor shall procure at its sole cost and expense, and shall maintain in force at all times during the term of this Contract, policies of insurance as herein below set forth, written by companies authorized by the New York State Insurance Department to issue insurance in the State of New York (“admitted” carriers) with an A.M. Best Company rating of “A-” Class “VII” or better. If during the term of the policy, a carrier’s rating falls below “A-” Class “VII”, the insurance must be replaced no later than the renewal date of the policy with an insurer acceptable to the New York State Office of General Services OGS and rated at least “A-” Class ”VII” in the most recently published Best’s Insurance Report.The Contractor shall deliver to OGS evidence of such policies in a form acceptable to OGS. These policies must be written in accordance with the requirements of the paragraphs below, as applicable. Acceptance and/or approval by OGS does not and shall not be construed to relieve Contractor of any obligations, responsibilities or liabilities under the Contract.General ConditionsConditions Applicable to Insurance. All policies of insurance required by this Contract must meet the following requirements:1.Coverage Types and Policy Limits. The types of coverage and policy limits required from the Contractor are specified in Paragraph B Insurance Requirements below. 2.Policy Forms. Except as may be otherwise specifically provided herein or agreed to in writing by OGS, policies must be written on an occurrence basis.3.Certificates of Insurance/Notices. Contractor shall provide a Certificate or Certificates of Insurance, in a form satisfactory to OGS, upon tentative award and within three (3) business days of request. Certificates shall reference the Contract Number. ALL OF THE ABOVE REFERENCED FORMS, EXCEPT CE-200, SI-12 & DB-155 MUST NAME The Office of General Services, New York State Procurement, Corning Tower - 38th Floor, Empire State Plaza, Albany, NY 12242 as the Entity Requesting Proof of Coverage (Entity being listed as the Certificate Holder). Certificates shall be submitted to same. Unless otherwise agreed, policies shall be written so as to include a provision that the policy will not be canceled, materially changed, or not renewed without at least thirty (30) days prior written notice except in cases of cancellation for non-payment, in the event of which notice shall be provided to OGS as required by law. The Contractor shall not take any action, or omit to take any action that would suspend or invalidate any of the required coverages during the period of time such coverages are required to be in effect. Not less than thirty (30) days prior to the expiration date or renewal date, the Contractor shall supply OGS with updated replacement Certificates of Insurance, and amendatory endorsements. Certificates of Insurance shallBe in the form approved by OGS;Disclose any deductible, self-insured retention, aggregate limit or any exclusion to the policy that materially changes the coverages required by the contract;Specify the Additional Insured and Named Insured as required herein;Refer to this Contract by number and any other attachments on the face of the certificate;Be signed by an authorized representative of the insurance carrier or producer.Only original documents (Certificates of Insurance and other attachments) will be accepted.4.Primary Coverage. All insurance policies shall provide that the required coverage shall apply on a primary and not on an excess or contributing basis as to any other insurance that may be available to OGS or any Authorized User for any claim arising from the Contractor ’s work under this Contract, or as a result of the Contractor’s activities. Any other insurance maintained by OGS or any Authorized User shall be excess of and shall not contribute with the Contractor’s insurance.GENERAL INFORMATION (Cont’d)CONTRACTOR’S INSURANCE REQUIREMENTS (Cont’d.)5.Policy Renewal/Expiration. At least thirty (30) days prior to the expiration of any policy required by this Contract, evidence of renewal or replacement policies of insurance with terms no less favorable to OGS than the expiring policies shall be delivered to OGS in the manner required for service of notice in Paragraph A.3. Certificates of Insurance/Notices above. If, at any time during the term of this Contract, the coverage provisions and limits of the policies required herein do not meet the provisions and limits set forth in the Contract or proof thereof is not provided to OGS, the Contractor shall immediately cease work. The Contractor shall not resume work until authorized to do so by OGS. Any delay, time lost, or additional cost incurred as a result of the Contractor not having insurance required by the Contract or not providing proof of same in a form acceptable to OGS, shall not give rise to a delay claim or any other claim against OGS. Should the Contractor fail to provide or maintain any insurance required by this Contract, or proof thereof is not provided, OGS or Authorized Users may withhold further contract payments, treat such failure as a breach or default of the contract.6.Self-Insured Retention/Deductibles. Certificates of Insurance must indicate the applicable deductible/self-insured retention on each policy. Deductibles or self-insured retentions above $100,000 are subject to approval from OGS. The Contractor shall be solely responsible for all claim expenses and loss payments within the deductible or self-insured retention.7.Subcontractors. Should the Contractor engage a Subcontractor, the Contractor shall require all Subcontractors, prior to commencement of an agreement between Contractor and the Subcontractor, to secure and keep in force during the term of this contract the insurance requirements of this document on the Subcontractor, as applicable. Proof thereof shall be supplied to OGS.All insurance required by the Contract shall name The People of the State of New York, its officers, agents, and employees as additional insured hereunder (General Liability Additional Insured Endorsement shall be on Insurance Service Office’s (ISO) form number CG 20 26 11 85 or the equivalent). The additional insured requirement does not apply to Workers Compensation, Disability, or Professional Liability coverage.B.Insurance Requirements: The Contractor, throughout the term of this Contract, or as otherwise required by this Contract, shall obtain and maintain in full force and effect, the following insurance with limits not less than those described below and as required by the terms of this Contract, or as required by law, whichever is greater (limits may be provided through a combination of primary and umbrella/excess policies):Commercial General Liability Insurance with a limit of not less than $2,000,000.00 each occurrence. Such liability shall be written on the ISO occurrence form CG 00 01 01 96, or a substitute form providing equivalent coverages and shall cover liability arising from premises operations, independent contractors, products-completed operations, broad form property damage, personal & advertising injury, cross liability coverage, liability assumed in a contract (including the tort liability of another assumed in a contract) and explosion, collapse & underground coverage.For construction contracts, if such insurance contains an aggregate limit, it shall apply separately on a per job basis. Policy shall include bodily injury, property damage and broad form contractual liability coverage.General Aggregate$2,000,000Products – Completed Operations Aggregate$1,000,000Personal and Advertising Injury$1,000,000Each Occurrence$2,000,000GENERAL INFORMATION (Cont’d)Coverage shall include, but not be limited to, the following: premises liability;independent contractors; blanket contractual liability, including tort liability of another assumed in a contract; defense and/or indemnification obligations, including obligations assumed under this contract;cross liability for additional insureds;products/completed operations for a term of no less than 3 years, commencing upon acceptance of the work, as required by the contract;explosion, collapse, and underground hazards; andcontractor means and methods.The following ISO forms must be endorsed to the policy:CG 00 01 01 96 or an equivalent – Commercial General Liability Coverage Form;CG 20 10 11 85 or an equivalent – Additional Insured-Owner, Lessees or Contractors (Form B); andWaiver of Subrogation Endorsement - Contractor shall cause to be included in each of its policies insuring against loss, damage or destruction by fire or other insured casualty a waiver of the insurer’s right of subrogation against OGS, or, if such waiver is unobtainable (i) an express agreement that such policy shall not be invalidated if Contractor waives or has waived before the casualty, the right of recovery against OGS or (ii) any other form of permission for the release of OGS.. b)Comprehensive Business Automobile Liability Insurance with a limit of not less than $2,000,000.00 each accident. Such insurance shall cover liability arising out of any automobile including owned, leased, hired and non-owned automobiles.c)OCP Insurance* - Owners and Contractors Protective Insurance Coverage (OCP) is required by the New York Department of Transportation (NYSDOT) on any NYSDOT project on or near active highway right of way.The OCP insurance required shall be $1,000,000 per occurrence and $2,000,000 in the aggregate.*Contractor shall provide written proof of such coverage to the Authorized User prior to commencement of work at the Pre-paving/Pre-production conferenceGENERAL INFORMATION (Cont’d)CONTRACTOR’S INSURANCE REQUIREMENTS (Cont’d.)A.Workers’ Compensation Insurance and Disability Benefits RequirementsWorkers’ Compensation Law (WCL) §57 & §220 requires the heads of all municipal and state entities to ensure that businesses applying for permits, licenses or contracts document it has appropriate workers’ compensation and disability benefits insurance coverage. These requirements apply to both original contracts and renewals, whether the governmental agency is having the work done or is simply issuing the permit, license or contract. Failure to provide proof of such coverage or a legal exemption will result in a rejection of your bid or renewal.1.Proof of Compliance with Workers’ Compensation Coverage Requirements:An ACORD form is NOT acceptable proof of workers’ compensation coverage. In order to provide proof of compliance with the requirements of the Workers’ Compensation Law pertaining to workers’ compensation coverage, a contractor shall:A)Be legally exempt from obtaining Workers’ Compensation insurance coverage; orB)Obtain such coverage from an insurance carrier; orC)Be a Workers’ Compensation Board-approved self-insured employer or participate in an authorized self-insurance plan.A Contractor seeking to enter into a contract with the State of New York shall provide one of the following forms to the Office of General Services at the time of bid submission or shortly after the opening of bids:A)Form CE-200, Certificate of Attestation for New York Entities With No Employees and Certain Out of State Entities, That New York State Workers’ Compensation and/or Disability Benefits Insurance Coverage is Not Required, which is available on the Workers’ Compensation Board’s website (wcb.state.ny.us); (Reference applicable RFP and Group #s on the form.)B)Certificate of Workers’ Compensation Insurance:1)Form C-105.2 (9/07) if coverage is provided by the contractor’s insurance carrier, contractor must request its carrier to send this form to the New York State Office of General Services, or 2)Form U-26.3 if coverage is provided by the State Insurance Fund, contractor must request that the State Insurance Fund send this form to the New York State Office of General Services. C)Form SI-12, Certificate of Workers’ Compensation Self-Insurance available from the New York State Workers’ Compensation Board’s Self-Insurance Office.D)Form GSI-105.2, Certificate of Participation in Workers’ Compensation Group Self-Insurance available from the contractor’s Group Self-Insurance Administrator. 2.Proof of Compliance with Disability Benefits Coverage Requirements:In order to provide proof of compliance with the requirements of the Workers’ Compensation Law pertaining to disability benefits, a contractor shall:A)Be legally exempt from obtaining disability benefits coverage; orB)Obtain such coverage from an insurance carrier; orC)Be a Board-approved self-insured employer.A Contractor seeking to enter into a contract with the State of New York shall provide one of the following forms to the Office of General Services at the time of bid submission or shortly after the opening of bids:A)Form CE-200, Certificate of Attestation for New York Entities With No Employees and Certain Out of State Entities, That New York State Workers’ Compensation and/or Disability Benefits Insurance Coverage is Not Required, which is available on the Workers’ Compensation Board’s website (wcb.state.ny.us); (Reference applicable RFP and Group #s on the form.)B)Form DB-120.1, Certificate of Disability Benefits Insurance. Contractor must request its business insurance carrier to send this form to the New York State Office of General Services; orC)Form DB-155, Certificate of Disability Benefits Self-Insurance. The Contractor must call the Board’s Self-Insurance Office at 518-402-0247 to obtain this form.GENERAL INFORMATION (Cont’d)CONTRACTOR REQUIREMENTS AND PROCEDURES FOR BUSINESS PARTICIPATION OPPORTUNITIES FOR NEW YORK STATE CERTIFIED MINORITY AND WOMEN-OWNED BUSINESS ENTERPRISES AND EQUAL EMPLOYMENT OPPORTUNITIES FOR MINORITY GROUP MEMBERS AND WOMENNEW YORK STATE LAWPursuant to New York State Executive Law Article 15-A, OGS recognizes its obligation under the law to promote opportunities for maximum feasible participation of certified minority and women-owned business enterprises and the employment of minority group members and women in the performance of OGS contracts. In 2006, the State of New York commissioned a disparity study to evaluate whether minority and women-owned business enterprises had a full and fair opportunity to participate in state contracting. The findings of the study were published on April 29, 2010, under the title "The State of Minority and Women-Owned Business Enterprises: Evidence from New York" (“Disparity Study”). The report found evidence of statistically significant disparities between the level of participation of minority and women-owned business enterprises in state procurement contracting versus the number of minority and women-owned business enterprises that were ready, willing and able to participate in state procurements. As a result of these findings, the Disparity Study made recommendations concerning the implementation and operation of the statewide certified minority and women-owned business enterprises program. The recommendations from the Disparity Study culminated in the enactment and the implementation of New York State Executive Law Article 15-A, which requires, among other things, that OGS establishes goals for maximum feasible participation of New York State Certified minority and women–owned business enterprises (“M/WBE”) and the employment of minority groups members and women in the performance of New York State contracts.EQUAL EMPLOYMENT OPPORTUNITY REQUIREMENTSBy submission of a bid or proposal in response to this solicitation, the Bidder/Contractor agrees with all of the terms and conditions of Appendix A including Clause 12 - Equal Employment Opportunities for Minorities and Women. The Contractor is required to ensure that it and any subcontractors awarded a subcontract over $25,000 for the construction, demolition, replacement, major repair, renovation, planning or design of real property and improvements thereon (the "Work") except where the Work is for the beneficial use of the Contractor, shall undertake or continue programs to ensure that minority group members and women are afforded equal employment opportunities without discrimination because of race, creed, color, national origin, sex, age, disability or marital status. For these purposes, equal opportunity shall apply in the areas of recruitment, employment, job assignment, promotion, upgrading, demotion, transfer, layoff, termination and rates of pay or other forms of compensation. This requirement does not apply to: (i) work, goods, or services unrelated to the Contract; or (ii) employment outside New York State. Bidder further agrees, where applicable, to submit with the bid a staffing plan on Form EEO 100 identifying the anticipated work force to be utilized on the Contract and if awarded a Contract, will, upon request, submit to OGS, a workforce utilization report identifying the workforce actually utilized on the Contract if known.Further, pursuant to Article 15 of the Executive Law (the “Human Rights Law”), all other State and Federal statutory and constitutional non-discrimination provisions, the Contractor and sub-contractors will not discriminate against any employee or applicant for employment because of race, creed (religion), color, sex, national origin, sexual orientation, military status, age, disability, predisposing genetic characteristic, marital status or domestic violence victim status, and shall also follow the requirements of the Human Rights Law with regard to non-discrimination on the basis of prior criminal conviction and prior arrest. Business Participation Opportunities for New York State Certified Minority and Women-Owned Business Enterprises (MWBE).For purposes of this procurement, OGS has conducted a comprehensive search and has determined that the contract does not offer any opportunities for participation for MWBEs. However, contractors are encouraged to make every good faith effort to promote and assist the participation of MWBEs on this Contract for the provision of services and materials. To locate MWBEs, the Directory of Certified Businesses can be viewed at .Please Note:Failure to comply with the foregoing requirements may result in a finding of non-responsiveness, non-responsibility and/or a breach of the Contract, leading to the withholding of funds, suspension or termination of the Contract or such other actions or enforcement proceedings as allowed by the Contract.The Form EEO 100 to be completed by the Bidder is available on the following three pages and at: EQUAL EMPLOYMENT OPPORTUNITY STAFFING PLANSUBMIT WITH BID OR PROPOSAL or within a reasonable time thereafter as requested by OGS, but prior to Contract Award. Solicitation No.: FORMTEXT ?????Reporting Entity:787404000500Contractor 831853365500Subcontractor Report includes Contractor’s787403048000Contractor’s work force to be utilized on this contract787403365500Contractor’s total work force787403365500Subcontractor’s work force to be utilized on this contract787403365500Subcontractor’s total work force Contractor/Subcontractor’s Name: FORMTEXT ????? Contractor/Subcontractor’s Address: FORMTEXT ?????FEIN: Enter the total number of employees for each classification.EEO Job CategoryTotal Work ForceWork force by GenderWork force byRace/Ethnic IdentificationTotalMale(M)TotalFemale(F)White (M) (F)Black (M) (F)Hispanic (M) (F)Asian (M) (F)American Indian or Alaskan Native (M) (F)Veteran (M) (F)Executive/Senior level Officials & Managers FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ?????First/Mid level officials & ManagersProfessionals FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ?????Technicians FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ?????Sales Workers FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ?????Administrative Support Workers FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ?????Craft Workers FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ?????OperativesLaborers and Helpers FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ?????Service Workers FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ????? FORMTEXT ?????TotalsPREPARED BY (Signature): FORMTEXT ?????TELEPHONE NO.: FORMTEXT ????? EMAIL ADDRESS: FORMTEXT ?????DATE: FORMTEXT ?????NAME AND TITLE OF PREPARER (Print or Type): FORMTEXT ?????EEO 100 (5/12)General instructions: Contact the Designated Contact(s) for the solicitation if you have any questions. All Offerors must complete an EEO Staffing Plan (EEO 100) and submit it as part of the bid or proposal package. Where the work force to be utilized in the performance of the State contract can be separated out from the contractor’s total work force, the Offeror shall complete this form only for the anticipated work force to be utilized on the State contract. Where the work force to be utilized in the performance of the State contract cannot be separated out from the contractor’s total work force, the Offeror shall complete this form for the contractor’s total work force. Subcontractors awarded a subcontract over $25,000 for the construction, demolition, replacement, major repair, renovation, planning or design of real property and improvements thereon (the "Work") except where the Work is for the beneficial use of the Contractor must complete this form upon request of OGS.Instructions for completing:Enter the Solicitation Number that this report applies to along with the name and address of the Offeror.Check off the appropriate box to indicate if the Offeror completing the report is the contractor or a subcontractor.Check off the appropriate box to indicate if the work force being reported is just for the contract or the Offerors’ total work force. Enter the total work force by EEO job category. Break down the total work force by gender and enter under the heading “Work force by Gender.”Break down the total work force by race/ethnic background and enter under the heading “Work force by Race/Ethnic Identification.” Enter the name, title, phone number and email address for the person completing the form. Sign and date the form in the designated boxes. RACE/ETHNIC IDENTIFICATIONRace/ethnic designations as used by the Equal Employment Opportunity Commission do not denote scientific definitions of anthropological origins. For the purposes of this report, an employee may be included in the group to which he or she appears to belong, identifies with, or is regarded in the community as belonging. However, no person should be counted in more than one race/ethnic group. The race/ethnic categories for this survey are:WHITE - (Not of Hispanic origin) All persons having origins in any of the original peoples of Europe, North Africa, or the Middle East.BLACK - A person, not of Hispanic origin, who has origins in any of the black racial groups of the original peoples of Africa.HISPANIC - A person of Mexican, Puerto Rican, Cuban, Central or South American or other Spanish culture or origin, regardless of race.ASIAN & PACIFIC - A person having origins in any of the original peoples of the Far East, Southeast Asia, the Indian subcontinent or the Pacific Islands. ISLANDERAMERICANINDIAN - A person having origins in any of the original peoples of North America, and who maintains cultural identification through tribal OR ALASKAN affiliation or community recognition. NATIVE (Not of Hispanic Origin)GENERAL INFORMATION (Cont’d)MERCURY-ADDED CONSUMER PRODUCTS:Offerers are advised that effective January 1, 2005, Article 27, Title 21 of the Environmental Conservation Law bans the sale or distribution free of charge of fever thermometers containing mercury except by prescription written by a physician and bans the sale or distribution free of charge of elemental mercury other than for medical pre-encapsulated dental amalgam, research, or manufacturing purposes due to the hazardous waste concerns of mercury. The law further states that effective July 12, 2005, manufacturers are required to label mercury-added consumer products that are sold or offered for sale in New York State by a distributor or retailer. The label is intended to inform consumers of the presence of mercury in such products and of the proper disposal or recycling of mercury-added consumer products. Offerers are encouraged to contact the Department of Environmental Conservation, Bureau of Solid Waste, Reduction & Recycling at (518) 402-8705 or the Bureau of Hazardous Waste Regulation at 1-800-462-6553 for questions relating to the law. Offerers may also visit the Department's web site for additional information: EMISSION REDUCTION ACT Pursuant to §19-0323 of the N.Y. Environmental Conservation Law (“the Law”) it is a requirement that heavy duty diesel vehicles in excess of 8,500 pounds use the best available retrofit technology (“BART”) and ultra low sulfur diesel fuel (“ULSD”). The requirement of the Law applies to all vehicles owned, operated by or on behalf of, or leased by State agencies and State or regional public authorities. It also requires that such vehicles owned, operated by or on behalf of, or leased by State agencies and State or regional public authorities with more than half of its governing body appointed by the Governor utilize BART. The Law may be applicable to vehicles used by contract vendors “on behalf of” State agencies and public authorities and require certain reports from contract vendors. All heavy duty diesel vehicles must have BART by December 31, 2014 (unless further extended by Law). The Law also provides a list of exempted vehicles. Regulations set forth in 6 NYCRR Parts 248 and 249 provide further guidance. The Bidder hereby certifies and warrants that all heavy duty vehicles, as defined in NYECL §19-0323, to be used under this contract, will comply with the specifications and provisions of NYECL §19-0323, and 6 NYCRR Parts 248 and 249IRAN DIVESTMENT ACT:As a result of the Iran Divestment Act of 2012 (Act), Chapter 1 of the 2012 Laws of New York, a new provision has been added to the State Finance Law (SFL), § 165-a, effective April 12, 2012. Under the Act, the Commissioner of the Office of General Services (OGS) will be developing a list (prohibited entities list) of “persons” who are engaged in “investment activities in Iran” (both are defined terms in the law). Pursuant to SFL § 165-a(3)(b), the initial list is expected to be issued no later than 120 days after the Act’s effective date, at which time it will be posted on the OGS website.By submitting a bid in response to this solicitation or by assuming the responsibility of a Contract awarded hereunder, Bidder/Contractor (or any assignee) certifies that once the prohibited entities list is posted on the OGS web site, it will not utilize on such Contract any subcontractor that is identified on the prohibited entities list.Additionally, Bidder/Contractor is advised that once the list is posted on the OGS web site, any Contractor seeking to renew or extend a Contract or assume the responsibility of a Contract awarded in response to the solicitation, must certify at the time the Contract is renewed, extended or assigned that it is not included on the prohibited entities list.During the term of the Contract, should OGS receive information that a person is in violation of the above-referenced certification, OGS will offer the person an opportunity to respond. If the person fails to demonstrate that it has ceased its engagement in the investment which is in violation of the Act within 90 days after the determination of such violation, then OGS shall take such action as may be appropriate including, but not limited to, imposing sanctions, seeking compliance, recovering damages, or declaring the Contractor in default.OGS reserves the right to reject any bid or request for assignment for an entity that appears on the prohibited entities list prior to the award of a contract, and to pursue a responsibility review with respect to any entity that is awarded a contract and appears on the prohibited entities list after contract award. GENERAL INFORMATION (Cont’d)INSTRUCTIONS FOR SUBMITTING YOUR BID ON ELECTRONIC MEDIAPlease carefully follow these instructions for submitting your bid on electronic media (eg.: CDs, USB memory sticks). The electronic media must be submitted in Microsoft Windows, Excel format—if it is not YOUR BID WILL BE REJECTED. If you have any questions, please contact Marcos Ortiz at (518) 474-1557 or e-mail marcos.ortiz@ogs..The Invitation for Bids contains the following files:22534-RMC-I Ready-Mixed Concrete - Invitation for Bids (Microsoft Excel Spreadsheet)22534-RMC-T&C Ready-Mixed Concrete - Terms and Conditions including Appendix 222534-RMC-QQ Ready-Mixed Concrete - Quick Quote Price/Calculation Worksheet (Sample)Appendix AAppendix BReview and save/download all documents for your records.Step 1:Open the Excel Worksheet titled “22534-RMC-I”. This worksheet has been password protected. Only the areas to receive your company information, bid prices, and answers to vendor questions can receive data.a.Save as new document by using the following steps:1.Click on "File".2.Click on “Save As”. Under "File Name," type YOUR COMPANY NAME (ex. ABC COMPANY), then click "Save”.b.Press the "Tab" key to enter cell A24. Type in the company name and press the "Tab" key. Continue filling in each area to which you tab.c.Prices are not to exceed three (3) decimal places. If you are not bidding an item, type NB for No Bid. Do NOT type No Bid. Do NOT type "0". Do NOT leave blank.Do NOT reformat cells. e.Contractors with multiple locations should enter all information pertaining to company and pricing for first location. After saving as (YOUR COMPANY NAME – NAME OF LOCATION 1), go to cell V104 (page 3) and enter supply location 2 (Street Address). Save as (YOUR COMPANY NAME – NAME OF LOCATION 2). Continue entering information for supply location 2. Click “Save”. Repeat for additional locations.f.If prices differ for supply locations, go to appropriate cell(s) and enter new price(s) over price(s) for previous location.g.Copy from the hard-drive onto electronic media. Close the electronic media file(s) and reopen to be certain that they have been successfully written to the electronic media. This check is VERY IMPORTANT in order for you to verify that the bid files were successfully saved to the electronic media and that they can be reopened. NYS Procurement highly recommends that bidder submits an additional (second) separate copy of Excel file(s) on separate electronic media as backup in the event that one file does not open or is otherwise unable to be accessed or is corrupted.Step 2:Save the document and print two hard copies. Sign the first page, then complete and sign the INDIVIDUAL, CORPORATION, PARTNERSHIP, OR LLC ACKNOWLEDGEMENT on page 2. This signature should be notarized. This hard copy must be submitted to OGS NYS Procurement along with your company’s electronic media bid file(s). In addition, a completed copy of Appendix 2 (ST-220-CA) with original signature and notarization should be returned with your bid. The second copy of the bid should be retained for your files. Appendix 2 (ST-220-TD) should be filed with the NYS Dept. of Taxation and Finance.INSTRUCTIONS FOR SUBMITTING YOUR BID ON ELECTRONIC MEDIA continued on next pageGENERAL INFORMATION (Cont’d)INSTRUCTIONS FOR SUBMITTING YOUR BID ON ELECTRONIC MEDIA (Cont’d.)Step 3:Enclose both the electronic media and a hard copy of the bid in an envelope. Use envelope label format shown below.Envelope Label FormatFROM:B. O. DATE:January 9, 2014B. O. Time:11:00 A.M.Group No.:33713 – Ready-Mixed ConcreteIFB No.:22534eMail to:NEW YORK STATE PROCUREMENTNYS OFFICE OF GENERAL SERVICESCORNING TOWER - 38TH FLOOREMPIRE STATE PLAZAALBANY NY 12242-0064NOTE:The following must be submitted as part of the bid submission:The completed bid spreadsheet (Excel file only) on electronic media (e.g.: compact disk, flash drive);One signed and dated hard copy;NOTE:The following must be submitted at the time of the bid opening or shortly thereafter:New York State Vendor Responsibility Questionnaire (Filed online or attached paper copy);Proof of Insurability – Certificate of Insurance (Please see “CONTRACTOR INSURANCE” clause);Appendix 2, Contractor Certification to Covered Agency (ST-220-CA) with original signature and notarization.BIDDERS TAKE SPECIAL NOTE OF THE FOLLOWING:Do not send the completed spreadsheet via e-mail. The electronic media and hard copy must be received by this office by the date and time of the bid opening.ANY BID pricing not submitted in Excel on electronic media shall be rejected.Any bid pricing or portion(s) thereof submitted on electronic media that cannot be opened/accessed shall be rejected. If labeling a CD, DO NOT affix label to or write on the data side (bottom side) of disc.New York State Office of General Services New York State Procurement reserves the right to reject any bid submission or portion(s) thereof determined to have been altered/modified from the original format by the vendor. Such alterations/modifications include but are not limited to any change(s) to document header(s), footer(s) and/or cell(s); unprotecting worksheet(s)/workbook(s); hiding/unhiding cell(s)/column(s)/row(s)/worksheet(s); and locking/unlocking cell(s).Only those cells provided for entering bid pricing, vendor information, and answers to vendor questions are to be accessed by the vendor.GENERAL INFORMATION (Cont’d)SCOPE (BID SYNOPSIS):The Award resulting from this solicitation is intended to provide Ready-Mixed Concrete to State and authorized non-state agencies.PRICE:Clause 23b of the General Specifications has been modified to include the following:Price shall be net, F.O.B. destination as designated by the ordering agency including all basic delivery charges per cubic yard for Lot 1 and Lot 2. Admixtures (with the exception of air-entraining) and surcharges shall be bid as additional costs.Periodic Price Adjustment - The base bid prices shown in the initial CONTRACT AWARD NOTIFICATION may be adjusted in accordance with changes in the US Bureau of Labor Statistics Producer Price Index for Ready-mixed Concrete as follows:PPI Series ID:WPU 1333Not seasonally adjusted“Base” Date for Contract Price Adjustments:May 2013The base index, unless removed by the data source, will remain in place and constant for the duration of the contract. Should a data source remove an index from publication, the Procurement Services Group will select an appropriate replacement index. In such instance the base would change to that of the new referenced index.If United States Department of Labor Producer Price Indices (PPI) are referenced, the value will be the figure referenced on the day of record as most recently published for the current year, whether or not indicated as “preliminary” on the working day prior to the date of record. Should the published figure in fact be preliminary, it will not be updated should a different figure replace it as permanent.Additional information on the Producer Price Index may be obtained at the U. S. Department of Labor website at: .The State will not effect any price adjustments (increases or decreases) for net percentage changes of two percent (2%) or less.DATES FOR IMPLEMENTATION:Effective Date for AdjustmentPPI Month for CalculationPPI Base MonthAugust 1, 2014May 2014May 2013February 1, 2015November 2014May 2013August 1, 2015May 2015May 2013February 1, 2016November 2015May 2013August 1, 2016May 2016May 2013CALCULATION METHOD:(PPI Month For calculation divided by PPI Base Month) multiplied times Base Bid Price in AwardEXAMPLE - This example is for illustration purposes only. Actual PPI values, etc., may vary.BASE BID PRICE=$130.000MAY 2013 PPI=222.0MAY 2014=231.5ADJUSTMENT EFFECTIVE AUGUST 1, 2014=(231.5/222.0) x $130.00=1.0428 x $130.00FINAL ADJUSTED PRICE =$135.564=$135.56Government Mandated Program Price Adjustment - An adjustment in price may be permitted if a government mandated program such as a new standard for emissions takes effect and suitable documentation is furnished to the State and the State determines the requested price change is verifiable and is reasonable. Such a price adjustment may be permitted for only a limited time since such an adjustment would eventually be reflected in the PPI.GENERAL INFORMATION (Cont’d)MINIMUM ORDER:The absolute minimum order is 3.0 cubic yards for each LOT.SURCHARGE FOR SMALL SIZE ORDERS:For all orders less than 7 cubic yards, contractor will be permitted to add a “small-load surcharge” to the invoice. At time of bid, vendor shall indicate the actual amount of each small load surcharge for orders between 3 cubic yards and 6.5 cubic yards inclusive. If an agency makes an initial order of 7 cubic yards or more to a particular jobsite, the contractor shall not be allowed to impose a “small-load surcharge” for additional “finishing loads” no matter how small these loads may be.QUALIFICATION OF BIDDER:No bid will be considered unless firm submitting same can meet the following conditions:1.Bidder must own, lease, or manage and control a plant and/or source adequate for and devoted to the manufacture of the item, which it proposes to furnish.2.Material furnished under these contracts shall be produced in an approved source meeting the requirements outlined in the Department of Transportation Specifications dated May 1, 2008 and all current addenda. An approved plant and/or source shall be in operation at the location indicated by bidder herein within the 12-month period prior to the bid opening date.3.Bidder should indicate in the Invitation for Bids, or shortly after the bid opening, the plant locations and/or the NYSDOT Source number from which material will be supplied in the event of award.DELIVERY AFTER RECEIPT OF PURCHASE ORDER (ARO):Delivery shall be expressed in number of calendar days required to make delivery after receipt of a purchase order (ARO). Product shall be delivered as required, based on Agency’s needs, during the contract period, with 48 hours prior notification by agency personnel to contractor.mPRICE CALCULATION WORKSHEET:Agencies may use the contract prices to complete the price calculation worksheet (see Excel file attachment – Quick Quote/Price Calculation Worksheet) to determine the Contractor offering the most practical and economical alternative using the agency’s form, function, and utility requirements. Agencies are encouraged to use the lowest bidder but if the lowest bidder is not selected, then the agency must prepare documentation for the procurement record explaining the action taken (e.g., the low Contractor could not provide the product in the time frame required, Contractor did not have the needed equipment).QUICK QUOTE:During the course of the award, agencies may wish to try to obtain lower prices and Contractors may wish to lower their contract prices for various reasons such as excess supply or slow business. Each quick quote situation is unique and the price is firm for that particular project only. If bid security is a concern, the agency may require bids to be sealed and/or opened publicly.The use of the Quick Quote Worksheet will be MANDATORY for all purchases made by any Executive Agency through the Contract(s) resulting from this IFB . OGS also encourages the use of the Quick Quote by Non- Executive Agencies as a way to get the best pricing possible.The Quick Quote sheet in Excel format should be completed, saved and forwarded in Excel. DO NOT scan, fax or save as a pdf. The Quick Quote sheets were converted to Excel format in order to expedite their usage in the field as well as facilitate the administration of the contract by NYS Procurement. Converting the Quick Quote sheets to other than Excel files defeats these purposes.Agencies using the quick quote are required to award to the lowest responsive bid meeting the agency’s requirements outlined in the requested quote. There are no negotiations permitted following the “Quick Quote” and prices cannot be changed once offered. If award is made to other than the lowest bid, the agency must prepare detailed documentation explaining the action taken for the failure to meet requirements. (e.g., the low Contractor could not provide the product in the time frame required, Contractor did not have needed equipment). This explanation along with the worksheets must be made a part of the procurement record.GENERAL INFORMATION (Cont’d)QUICK QUOTE: (Cont’d.)Contractors are not required to lower prices when they receive a quick quote. They may quote the contract price. However, at no time may a quick quote unit price (without the Price Adjustment) exceed the contract price. Materials cost, hauling expenses, etc., can be lowered by the Contractor during the quick quote process.Since periodic price adjustments (every six months) will be charged/credited to all invoices (after the work is finished), the user and the Contractor understand that the Project's Total Cost shown in the Quick Quote includes all the needed Price Adjustments for the date indicated in the Quick Quote (when the Quick Quote was sent to the Contractor). If the project (or part of the project) is executed in a different six-month period than the one used to calculate the Quick Quote, then the Project's Total Cost will change accordingly to reflect the Price Adjustments for the six-month period in which the project (or part of the project) was actually performed.METHOD OF AWARD:General - Award shall be made by “DOT CLASS” (e.g., by type of mix). Only timely bids will be considered in the awarding of a contract except where it may be proven there is no DOT approved source of supply within a reasonable distance and/or that it would create a hardship to require travel to secure products. Bid prices will be evaluated at the time of bid opening on the following basis:1.An "average price" per bid item shall be calculated. An average price will be obtained for Rockland, Westchester, Putnam, Nassau and Suffolk Counties and statewide for all remaining counties.2.Any bid pricing which exceeds the "average price" by more than 50% will receive an Award Pending. A "revised average price" per DOT material item shall be recalculated after removal of those bid prices over 50%. Any remaining bid pricing which exceeds 10% of the "revised average price" will be given an "Award Pending" classification.3.Bid pricing that does not exceed the "revised average price" increased by 10% shall receive a contract award.4.Any contractor given an "Award Pending" for a bid item may become eligible for award by reducing its price(s) within the parameters of paragraph #3 above. Acceptable revised pricing shall be considered up to thirty days after date issued that appears on the original Contract Award Notification. If necessary, a Revised Award shall be published to incorporate contractors whose pricing is determined to be acceptable.Vendor Responsibility On Accuracy - Vendors are responsible for the accuracy of their bids. All bidders are directed to take extreme care in developing their bids. Vendors are cautioned to carefully review their bids prior to the bid opening, as requests for bid withdrawals of any type are not likely to be granted. All exceptions and deviations must be noted in bids, otherwise the bid will be considered in full compliance with requirements and no adjustments may be made after award is issued. Bidders, in the preparation of their bids, should maintain complete and accurate calculation worksheets, which clearly support their submissions.METHOD OF ORDERING:General - Orders for the purchase of material will be placed with the contractor whose source of supply offers the lowest ultimate cost to the State or authorized user for the delivery specified and who can deliver within the time frame requested by the ordering agency.The lowest ultimate cost includes the FOB Plant (or if applicable, supply location) Price, total Haul Cost (based on cost per net ton mile), additional Charges (ferry and/or bridge tolls), and price per day for equipment. The ultimate cost for each contractor will be computed based on the location from which the material is being supplied, not necessarily the location of the approved plant where it was manufactured.Purchase Order Instructions - Delivery shall be made in accordance with instructions on purchase order from each agency. If there is a discrepancy between the purchase order and what is listed on the contract, it is the contractor’s obligation to seek clarification from the ordering agency and, if applicable, from the Office of General Services, Procurement Services Group. (SEE ALSO SEPARATE CLAUSE ON “PURCHASE ORDERS AND INVOICES”.)GENERAL INFORMATION (Cont’d)PURCHASE ORDERS AND INVOICING:General – All orders and invoices/vouchers should include the contract number and a line by line listing of separate charges.Invoices - Contract users are instructed not to process invoices without needed information. Invoices must be detailed and include all of the following:Contract NumberPurchase Order NumberItem DescriptionLine item breakdown of all charges.Failure to comply may result in lengthy payment delays.DELIVERY AFTER RECEIPT OF PURCHASE ORDER (ARO):General - Delivery shall be made as specified and in accordance with instructions furnished with each order, unless otherwise directed in writing. A delivery slip is required with each delivery. Invoice must be sent promptly by the contractor to the Regional Office of the region to which the material is shipped, or to the Agency placing the order.General Specifications Modification - Clause 45 of the General Specifications is modified as follows:Failure to furnish material within ten days after receiving and accepting order or as agreed upon with authorized representative or violation of shipping instructions, shall be cause for and entitle the State (1) to damages which in its judgment have resulted, or (2) to purchase in the open market at the expense of the contractor. At the discretion of the State, one or both of these courses of action may be followed.CONTRACT PAYMENTS:Payments cannot be processed by State facilities until the contract products have been delivered in satisfactory condition or services have been satisfactorily performed. Payment will be based on any invoice used in the supplier's normal course of business. However, such invoice must contain sufficient data including but not limited to contract number, description of product or service, quantity, unit and price per unit as well as federal identification number. State facilities are required to forward properly completed vouchers to the Office of the State Comptroller for audit and payment. All facilities are urged to process every completed voucher expeditiously giving particular attention to those involving cash discounts for prompt payment. If the contract terms indicate political subdivisions and others authorized by law are allowed to participate, those entities are required to make payments directly to the contractor. Prior to processing such payment, the contractor may be required to complete the ordering non-State agency's own voucher form. See "Contract Billings" in Appendix B, OGS General Specifications.NON-STATE AGENCIES PARTICIPATION IN CENTRALIZED CONTRACTS:New York State political subdivisions and others authorized by New York State law may participate in contracts. These include, but are not limited to local governments, public authorities, public school and fire districts, public and nonprofit libraries, and certain other nonpublic/nonprofit organizations. See "Participation in Centralized Contracts" in Appendix B, OGS General Specifications. For purchase orders issued by the Port Authority of New York and New Jersey (or any other authorized entity that may have delivery locations adjacent to New York State), the terms of the "Price" clause shall be modified to include delivery to locations adjacent to New York State.Upon request, all eligible non-State agencies must furnish contractors with the proper tax exemption certificates and documentation certifying eligibility to use State contracts. A list of categories of eligible entities is available on the OGS web site (). Questions regarding an organization's eligibility to purchase from New York State Contracts may also be directed to OGS New York State Procurement's Customer Services at 518-474-6717.EXTENSION OF USE:Any contract resulting from this bid solicitation may be extended to additional States or governmental jurisdictions upon mutual written agreement between New York State (the lead contracting State) and the contractor. Political subdivisions and other authorized entities within each participating State or governmental jurisdiction may also participate in any resultant contract if such State normally allows participation by such entities. New York State reserves the right to negotiate additional discounts based on any increased volume generated by such extensions.GENERAL INFORMATION (Cont’d)ESTIMATED QUANTITIES:Each contract shall be for the quantities or dollar values actually ordered during the contract period. The individual value of each contract is indeterminate and will depend upon the number of contracts issued and the competitiveness of the pricing offered. Agencies will be encouraged to purchase from contractors who offer the supplies, services, and pricing that best meet their needs in the most practical and economical manner. See "Estimated/Specific Quantity Contracts" and "Participation in Centralized Contracts" in Appendix B, OGS General Specifications.NEW YORK STATE PROCUREMENT CARD:See "Procurement Card" in Appendix B, OGS General Specifications. All bidders shall indicate if they will accept the NYS Purchasing Card for orders not to exceed $15,000 (see Questions at end of bid document).CONTRACT PERIOD AND RENEWALS:It is the intention of the State to enter into a contract for a term of two years as stated on the Invitation for Bids except that the commencement and termination dates appearing on the Invitation for Bids may be adjusted forward unilaterally by the State for any resulting contract for up to two calendar months, by indicating such change on the Contract Award Notification. The contract dates may be adjusted forward beyond two months only with the approval of the successful bidder. If, however, the bidder is not willing to accept an adjustment of the contract dates beyond the two month period, the State reserves the right to proceed with an award to another bidder. If mutually agreed between New York State Procurement and the contractor, the contract may be renewed under the same terms and conditions for additional period(s) not to exceed a total contract term of five (5) years.SHORT TERM EXTENSION:In the event the replacement contract has not been issued, any contract let and awarded hereunder by the State, may be extended unilaterally by the State for an additional period of up to one month upon notice to the contractor with the same terms and conditions as the original contract including, but not limited to, quantities (prorated for such one month extension), prices, and delivery requirements. With the concurrence of the contractor, the extension may be for a period of up to three months in lieu of one month. However, this extension terminates should the replacement contract be issued in the interim.CANCELLATION FOR CONVENIENCEThe State of New York retains the right to cancel this contract in whole or in part without reason provided that the Contractor is given at least a 60-day notice of the State’s intent to cancel. This provision should not be understood as waiving the State's right to terminate the contract for cause or stop work immediately for unsatisfactory work, but is supplementary to that provision. Any such cancellation shall have no effect on existing Agency agreements, which are subject to the same 60 day discretionary cancellation or cancellation for cause by the respective user Agencies.CONTRACT MIGRATION:State Agencies or any other authorized user holding individual contracts with contractors under this centralized contract shall be able to migrate to this contract award with the same contractor, effective on the contract begin date (retroactively, if applicable). Migration by an agency or any other authorized user to the centralized contract shall not operate to diminish, alter or extinguish any right that the agency or other authorized user otherwise had under the terms and conditions of their original contract.EMERGENCY PURCHASING:In the event that a disaster emergency is declared by Executive Order under Section 28 of Article 2-B of the Executive Law, or that the Commissioner determines pursuant to his/her authority under Section 163(10)(b) of the State Finance Law that an emergency exists requiring the prompt and immediate delivery of products or services, the Commissioner reserves the right to obtain such products or services from any source, including but not limited to this contract, as the Commissioner in his/her sole discretion determines will meet the needs of such emergency. Contractor shall not be entitled to any claim or lost profits for products or services procured from other sources pursuant to this paragraph.GENERAL INFORMATION (Cont’d)"OGS OR LESS" GUIDELINES APPLY TO THIS CONTRACT:Purchases of the products included in the Invitation For Bids and related Contract Award Notification are subject to the "OGS or Less" provisions of Section 163.3.a.v., Article XI, of the New York State Finance Law. This means that State agencies can purchase products from sources other than the contractor provided that such products are substantially similar in form, function or utility to the products herein and are:1.lower in price -and/or-2.available under terms which are more economically efficient to the State agency (e.g. delivery terms, warranty terms, etc.).Agencies are reminded that they must provide the State contractor an opportunity to match the non-contract savings at least two business days prior to purchase. In addition, purchases made under "OGS or Less" flexibility must meet all requirements of law including, but not limited to, advertising in the New York State Contract Reporter, prior approval of the Comptroller's Office and competitive bidding of requirements exceeding the discretionary bid limit. State agencies should refer to Procurement Council Guidelines section "OGS or Less Purchases" for complete procedural and reporting requirements. The Procurement Council Guidelines are available at vendors furnishing materials under “OGS or Less” shall meet the same qualifications as those required of contract vendors. In addition, non-contract vendors are subject to all other requirements and conditions appearing in this Invitation for Bids including Group Specification, Appendix A, Appendix B and any and all applicable Purchasing Memoranda.Price shall include ALL required insurance coverage costs (see “CONTRACTOR INSURANCE” clauses).REPORT OF CONTRACT PURCHASES:Contractor shall furnish quarterly reports containing total sales for both state agency and authorized non-state agency contract purchases no later than forty-five (45) days after the close of each calendar quarter.A separate report shall be provided in the following format for each authorized distribution channel. The sales report form is forwarded to each contractor at time of award for completion in accordance with the contract terms and conditions:Item/NumberPurchasingAgencyLocationTotal Sales $$Grand Total Sales:$The report is to be submitted electronically in Microsoft Excel 2010 or lower format to the Office of General Services, New York State Procurement, Tower Bldg., Empire State Plaza, Albany, NY 12242, to the attention of the individual shown on the front page of the Contract Award Notification and shall reference the Group Number, the Award Number, Contract Number, sales period, and contractor's (or other authorized agent) name.The outlined sales report is the minimum information required. Additional related sales information, such as monthly reports, and/or detailed user purchases may be required and must be supplied upon request.DETAILED PRODUCT SPECIFICATIONSGENERAL REQUIREMENTS - ALL CONCRETE - ALL LOTS1.0 - NYS DOT APPROVAL:Product shall be delivered only from New York State Department of Transportation approved plants.2.0 - SAMPLING AND TESTING:The Office of General Services or any of its authorized representatives reserves the right to take samples during any pour in order to test the concrete for compliance to the specified performance standards. Any product failing to meet the minimum standards for these tests may be subject to replacement.LOT 1 - CONCRETE, READY-MIXED - DOT CLASSES1.0 - SCOPE:This specification describes various classes of ready-mixed concrete (DOT Classes A, D, DP, E, F, H, HP, & J); much of the concrete ordered through resulting contracts will be used in repairing bridges.Concrete supplied must meet all applicable (DOT) specifications. Concrete may also be ordered by other state agencies and political subdivisions for various uses.The classes of ready-mixed concrete required are as follows:Class ANormal Structural ConcreteClass DThin Section ConcreteClass DPThin Section Concrete with fly ash and microsilica addedClass EStructural Bridge Deck ConcreteClass FHigh Early Strength Concrete for pavement or structural slabsClass HConcrete suitable for pumping applicationsClass HPConcrete suitable for pumping applications - with fly ash and microsilica addedClass JConcrete suitable for slip forming structural median barriers, parapet walls and curbsThese classes of concrete shall conform to the requirements of Section 501 of the book entitled New York State Department of Transportation, Standard Specifications, Construction and Materials, dated May 1, 2008.2.0 - ADMIXTURES:Per Agency request, admixtures and/or special ingredients shall be provided in various batches of the delivered concrete. Admixtures shall be provided on a “price additional” basis. The types of admixtures required are as follows:ASTM Type AWater-Reducing AdmixturesASTM Type DWater-Reducing and Retarding AdmixturesASTM Type FWater-Reducing (High Range) AdmixturesFibrous Concrete Reinforcement: 1.0 to 1.5 pounds of polypropylene fibers per cubic yard of concrete as recommended by the manufacturer.These admixtures shall conform to the requirements of Section 711-08 Admixtures in the book entitled New York State Department of Transportation, Standard Specifications, Construction and Materials, dated May 1, 2008.DETAILED PRODUCT SPECIFICATIONS (Cont’d.)LOT 2 - CONCRETE, READY-MIXED - PERFORMANCE BASED MIXES - OGS APPROVED1.0 - SCOPE:This specification describes various types of ready-mixed concrete (3000 psi, 3500 psi and 4000 psi); much of the concrete ordered through resulting contracts for Lot 2 will be used for general purposes such as footings and walls, interior slab on grade, any non-exposed work and all exterior slab on grade.Concrete supplied must meet all applicable (ASTM) specifications for general use. Concrete may also be ordered by state agencies and political subdivision for various other uses. All work shall conform to the requirements of Specifications for Structural Concrete for Buildings ACI 301-96 of the American Concrete Institute, unless shown or specified otherwise.The types of ready-mixed concrete required are as follows:3000 PSIFootings and walls, interior slab on grade3500 PSIAll around general purpose for any non-exposed work4000 PSIAll exterior slabs, ramps and stairs, garage floor slabs and loading docksThese types of concrete shall conform to the requirements of Office of General Services. Concrete materials shall conform to the following requirements:Cement:ASTM C150, Type I or II Portland CementFly Ash:ASTM C618, Class FWater:Potable2.0 - ADMIXTURES:Per Agency request, admixtures and/or special ingredients shall be provided in various batches of the delivered concrete. The types of admixtures that may be required are as follows:ASTM C260Air-Entraining Admixture: 6% + 1.5% by volume. This admixture shall be added as needed with no additional cost.ASTM C494Type A Water-Reducing AdmixturesASTM C494Type D Water-Reducing and Retarding Admixtures: for use in hot weather concreting Fibrous Concrete Reinforcement: 1.0 to 1.5 pounds of polypropylene fibers per cubic yard of concrete as recommended by the manufacturer.These admixtures shall conform to the requirements of ASTM and DOT Standards and must be on the DOT Approved List. Concrete shall have a minimum slump of 2" and a maximum slump of 4" before the addition of any water reducing admixtures at the site.BID SUBMISSION CHECK-OFF:The following identifies some of the requirements for this solicitation. Bidder is to check submissions made. “M” next to the item(s) indicates a mandatory requirement to be submitted at the time of the bid opening. “M” next to the item(s) indicates a mandatory requirement to be submitted at the time of the bid opening or shortly thereafter.MThe completed bid file (Excel only) on electronic media (e.g.: compact disc, flash drive) FORMCHECKBOX YESNO FORMCHECKBOX NYS Procurement highly recommends that bidder submits additional (second) separate copy of Excel file(s) on separate electronic media as backup in the event that one does not open or is otherwise unable to be accessed or is corrupted.**ANY BID pricing not submitted in Excel on electronic media shall be rejected**MOne hard copy of bid file (Excel file pages 1-18), including the following:Front page of Invitation For Bids (page 1), signed and dated FORMCHECKBOX YESNO FORMCHECKBOX Second page of Invitation For Bids (page 2), signed, dated and notarized FORMCHECKBOX YESNO FORMCHECKBOX Bid price pages (pages 3-13)Questions on pages 14-18, including the following:- “NOTES TO BIDDERS” FORMCHECKBOX YESNO FORMCHECKBOX - “BIDDERS PLEASE ANSWER THE FOLLOWING QUESTIONS” FORMCHECKBOX YESNO FORMCHECKBOX MBid Deviations, if applicable: FORMCHECKBOX YESNO FORMCHECKBOX MNYS VENDOR RESPONSIBILITY QUESTIONNAIRE FORMCHECKBOX YESNO FORMCHECKBOX (Please see ‘NYS VENDOR RESPONSIBILITY QUESTIONNAIRE FOR-PROFIT BUSINESS ENTITY” clause):MProof of Insurability – Certificates of Insurance FORMCHECKBOX YESNO FORMCHECKBOX (Please see ‘CONTRACTOR INSURANCE” clause):MAppendix 2 - Contractor Certification to Covered Agency (ST-220-CA) FORMCHECKBOX YESNO FORMCHECKBOX NOTE:Submit ST-220-TD directly to NYS Dept. of Taxation & Finance under separate cover.Please DO NOT send a copy of ST-220-TD with your bid to OGS.Please DO NOT send pages from the bid that are not completed by bidder, including Appendices A and B; and Group Specification. The only pages that should be included in the bid submission are the IFB cover (signatory) page, bid price pages, bidder questions pages, Appendix 2 (ST-220-CA), and the signatory page(s) from any and all purchasing memoranda.Appendix 2New York State Department of Taxation and Finance Contractor Certification (ST-220-TD) {Updated 01/08}SUBMIT THIS FORM TO NYS DEPARTMENT OF TAXATION & FINANCEDO NOT INCLUDE WITH YOUR BID SUBMISSIONContractor Certification to Covered Agency (ST-220-CA)INCLUDE WITH YOUR BID SUBMISSIONNew York State Department of Taxation and FinanceST-220-TDContractor Certification(5/07)(Pursuant to Section 5-a of the Tax Law, as amended, effective April 26, 2006)For information, consult Publication 223, Question and Answers Concerning Tax Law Section 5-a (see Need help? below).Contractor name Contractor’s principal place of businessCityStateZIP code Contractor’s mailing address (if different than above) Contractor's federal employer identification number (EIN)Contractor's sales tax ID number (if different from contractor's EIN)Contractor's telephone number ( )Covered agency name OGS NYS ProcurementContract number or description Estimated contract value over full term of contract(but not including renewals) $ N/ACovered agency address Corning Tower, The Governor Nelson A. Rockefeller Plaza, Albany, NY 12242Covered agency telephone number(518) 474-1557 General information Section 5-a of the Tax Law, as amended, effective April 26, 2006, requires certain contractors awarded certain state contracts valued at more than $100,000 to certify to the Tax Department that they are registered to collect New York State and local sales and compensating use taxes, if they made sales delivered by any means to locations within New York State of tangible personal property or taxable services having a cumulative value in excess of $300,000, measured over a specified period. In addition, contractors must certify to the Tax Department that each affiliate and subcontractor exceeding such sales threshold during a specified period is registered to collect New York State and local sales and compensating use taxes. Contractors must also file a Form ST-220-CA, certifying to the procuring state entity that they filed Form ST-220-TD with the Tax Department and that the information contained on Form ST-220-TD is correct and complete as of the date they file Form ST-220-CA. All sections must be completed including all fields on the top of this page, all sections on page 2, Schedule A on page 3, if applicable, and Individual, Corporation, Partnership, or LLC Acknowledgement on page 4. If you do not complete these areas, the form will be returned to you for completion.Privacy notification The Commissioner of Taxation and Finance may collect and maintain personal information pursuant to the New York State Tax Law, including but not limited to, sections 5-a, 171, 171-a, 287, 308, 429, 475, 505, 697, 1096, 1142, and 1415 of that Law; and may require disclosure of social security numbers pursuant to 42 USC 405(c)(2)(C)(i). This information will be used to determine and administer tax liabilities and, when authorized by law, for certain tax offset and exchange of tax information programs as well as for any other lawful purpose. Information concerning quarterly wages paid to employees is provided to certain state agencies for purposes of fraud prevention, support enforcement, evaluation of the effectiveness of certain employment and training programs and other purposes authorized by law. Failure to provide the required information may subject you to civil or criminal penalties, or both, under the Tax Law.This information is maintained by the Director of Records Management and Data Entry, NYS Tax Department, W A Harriman Campus, Albany NY 12227.For more detailed information regarding this form and section 5-a of the Tax Law, see Publication 223, Questions and Answers Concerning Tax Law Section 5-a, (as amended, effective April 26, 2006), available at . Information is also available by calling the Tax Department’s Contractor Information Center at 1 800 698-2931.Note: Form ST-220-TD must be signed by a person authorized to make the certification on behalf of the contractor, and the acknowledgement on page 4 of this form must be completed before a notary public. Mail completed form to:NYS TAX DEPARTMENT DATA ENTRY SECTION W A HARRIMAN CAMPUS ALBANY NY 12227 Need Help?-635-2220595Internet access: (for information, forms, and publications)-635-2027555Fax-on-demand forms: 1 800 748-3676-635-1982470Telephone assistance is available from 8:00 A.M. to 5:00 P.M. (eastern time), Monday through Friday.To order forms and publications:1 800 462-8100Sales Tax Information Center:1 800 698-2909From areas outside the U.S. and outside Canada: (518) 485-6800Hearing and speech impaired (telecommunications device for thedeaf (TDD) callers only): 1 800 634-2110-635-1631950Persons with disabilities: In compliance with the Americans with Disabilities Act, we will ensure that our lobbies, offices, meeting rooms, and other facilities are accessible to persons with disabilities. If you have questions about special accommodations for persons with disabilities, please call 1 800 972-1233.1410970615950SUBMIT THIS FORM TO NYS DEPARTMENT OF TAXATION & FINANCE020000SUBMIT THIS FORM TO NYS DEPARTMENT OF TAXATION & FINANCEPage 2 of 4 ST-220-TD (5/07) I, ____________________________ , hereby affirm, under penalty of perjury, that I am ______________________ (name) ( title)of the above-named contractor, and that I am authorized to make this certification on behalf of such plete Sections 1, 2, 3 below. Make only one entry in each section below.Section 1 - Contractor registration status FORMCHECKBOX The contractor has made sales delivered by any means to locations within New York State of tangible personal property or taxable services having a cumulative value in excess of $300,000 during the four sales tax quarters which immediately precede the sales tax quarter in which this certification is made. The contractor is registered to collect New York State and local sales and compensating use taxes with the Commissioner of Taxation and Finance pursuant to sections 1134 and 1253 of the Tax Law, and is listed on Schedule A of this certification. FORMCHECKBOX The contractor has not made sales delivered by any means to locations within New York State of tangible personal property or taxable services having a cumulative value in excess of $300,000 during the four sales tax quarters which immediately precede the sales tax quarter in which this certification is made.Section 2 - Affiliate registration status FORMCHECKBOX The contractor does not have any affiliates. FORMCHECKBOX To the best of the contractor’s knowledge, the contractor has one or more affiliates having made sales delivered by any means to locations within New York State of tangible personal property or taxable services having a cumulative value in excess of $300,000 during the four sales tax quarters which immediately precede the sales tax quarter in which this certification is made, and each affiliate exceeding the $300,000 cumulative sales threshold during such quarters is registered to collect New York State and local sales and compensating use taxes with the Commissioner of Taxation and Finance pursuant to sections 1134 and 1253 of the Tax Law. The contractor has listed each affiliate exceeding the $300,000 cumulative sales threshold during such quarters on Schedule A of this certification. FORMCHECKBOX To the best of the contractor’s knowledge, the contractor has one or more affiliates, and each affiliate has not made sales delivered by any means to locations within New York State of tangible personal property or taxable services having a cumulative value in excess of $300,000 during the four sales tax quarters which immediately precede the sales tax quarter in which this certification is made.Section 3 - Subcontractor registration status FORMCHECKBOX The contractor does not have any subcontractors. FORMCHECKBOX To the best of the contractor’s knowledge, the contractor has one or more subcontractors having made sales delivered by any means to locations within New York State of tangible personal property or taxable services having a cumulative value in excess of $300,000 during the four sales tax quarters which immediately precede the sales tax quarter in which this certification is made, and each subcontractor exceeding the $300,000 cumulative sales threshold during such quarters is registered to collect New York State and local sales and compensating use taxes with the Commissioner of Taxation and Finance pursuant to sections 1134 and 1253 of the Tax Law. The contractor has listed each subcontractor exceeding the $300,000 cumulative sales threshold during such quarters on Schedule A of this certification. FORMCHECKBOX To the best of the contractor’s knowledge, the contractor has one or more subcontractors, and each subcontractor has not made sales delivered by any means to locations within New York State of tangible personal property or taxable services having a cumulative value in excess of $300,000 during the four sales tax quarters which immediately precede the sales tax quarter in which this certification is made.Sworn to this______ day of _________, 20 ____(sign before a notary public)(title)1398270579120SUBMIT THIS FORM TO NYS DEPARTMENT OF TAXATION & FINANCE020000SUBMIT THIS FORM TO NYS DEPARTMENT OF TAXATION & FINANCEST-220-TD (5/07) Page 3 of 4Schedule A - Listing of each entity (contractor, affiliate, or subcontractor) exceeding $300,000 cumulative sales thresholdList the contractor, or affiliate, or subcontractor in Schedule A only if such entity exceeded the $300,000 cumulative sales threshold during the specified sales tax quarters. See directions below. For more information, see Publication 223.ARelationship to ContractorBNameCAddressDFederal ID NumberESales Tax ID NumberFRegistrationIn ProgressColumn A -Enter C in column A if the contractor; A if an affiliate of the contractor; or S if a subcontractor.Column B -Name - If the entity is a corporation or limited liability company, enter the exact legal name as registered with the NY Department of State, if applicable. If the entity is a partnership or sole proprietor, enter the name of the partnership and each partner’s given name, or the given name(s) of the owner(s), as applicable. If the entity has a different DBA (doing business as) name, enter that name as well.Column C -Address - Enter the street address of the entity’s principal place of business. Do not enter a PO box.Column D -ID number - Enter the federal employer identification number (EIN) assigned to the entity. If the entity is an individual, enter the social security number of that person.Column E -Sales tax ID number - Enter only if different from federal EIN in column D.Column F -If applicable, enter an X if the entity has submitted Form DTF-17 to the Tax Department but has not received its certificate of authority as of the date of this certification.14871701734185SUBMIT THIS FORM TO NYS DEPARTMENT OF TAXATION & FINANCE020000SUBMIT THIS FORM TO NYS DEPARTMENT OF TAXATION & FINANCEPage 4 of 4 ST-220-TD (5/07)Individual, Corporation, Partnership, or LLC AcknowledgmentSTATE OF}:SS.:COUNTY OF}On the day of in the year 20, before me personally appeared known to me to be the person who executed the foregoing instrument, who, being duly sworn by me did depose and say that_he resides at ,Town of ,County of ,State of ; and further that:[Mark an X in the appropriate box and complete the accompanying statement.] FORMCHECKBOX (If an individual): _he executed the foregoing instrument in his/her name and on his/her own behalf. FORMCHECKBOX (If a corporation): _he is the ???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? of????????????????????????????????????????????????????????, the corporation described in said instrument; that, by authority of the Board of Directors of said corporation, _he is authorized to execute the foregoing instrument on behalf of the corporation for purposes set forth therein; and that, pursuant to that authority, _he executed the foregoing instrument in the name of and on behalf of said corporation as the act and deed of said corporation. FORMCHECKBOX (If a partnership): _he is a ???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? of????????????????????????????????????????????????????????, the partnership described in said instrument; that, by the terms of said partnership, _he is authorized to execute the foregoing instrument on behalf of the partnership for purposes set forth therein; and that, pursuant to that authority, _he executed the foregoing instrument in the name of and on behalf of said partnership as the act and deed of said partnership. FORMCHECKBOX (If a limited liability company): _he is a duly authorized member of????????????????????????????????????????????????????????????????????????? LLC, the limited liability company described in said instrument; that _he is authorized to execute the foregoing instrument on behalf of the limited liability company for purposes set forth therein; and that, pursuant to that authority, _he executed the foregoing instrument in the name of and on behalf of said limited liability company as the act and deed of said limited liability company.Notary PublicRegistration No. 15379701648460SUBMIT THIS FORM TO NYS DEPARTMENT OF TAXATION & FINANCE020000SUBMIT THIS FORM TO NYS DEPARTMENT OF TAXATION & FINANCEST-220-CA(6/06)New York State Department of Taxation and FinanceContractor Certification to Covered Agency(Pursuant to Section 5-a of the Tax Law, as amended, effective April 26, 2006)For information, consult Publication 223, Question and Answers Concerning Tax Law Section 5-a (see Need Help? on back).Contractor nameFor covered agency use only Contract number or descriptionContractor’s principal place of businessCityStateZIP codeContractor’s mailing address (if different than above)Estimated contract value over the full term of contract (but not including renewals)Contractor's federal employer identification number (EIN)Contractor's sales tax ID number (if different from contractor's EIN)$Contractor's telephone number( )Covered agency nameNYS Office of General ServicesCovered agency addressCorning Tower, The Governor Nelson A. Rockefeller Plaza, Albany, NY 12242Covered agency telephone number(518) 474-1557I, hereby affirm, under penalty of perjury, that I am (name)(title)of the above-named contractor, that I am authorized to make this certification on behalf of such contractor, and I further certify that:(Mark an X in only one box) FORMCHECKBOX The contractor has filed Form ST-220-TD with the Department of Taxation and Finance in connection with this contract and, to the best of contractor’s knowledge, the information provided on the Form ST-220-TD, is correct and complete. FORMCHECKBOX The contractor has previously filed Form ST-220-TD with the Tax Department in connection with (insert contract number or description)and, to the best of the contractor’s knowledge, the information provided on that previously filed Form T-220-TD, is correct and complete as of the current date, and thus the contractor is not required to file a new Form ST-220-TD at this time.Sworn to this______ day of _________, 20 ____ (sign before a notary public) (title)InstructionsGeneral InformationTax Law section 5-a was amended, effective April 26, 2006. On or after that date, in all cases where a contract is subject to Tax Law section 5-a, a contractor must file (1) Form ST-220-CA, Contractor Certification to Covered Agency, with a covered agency, and (2) Form ST-220-TD with the Tax Department before a contract may take effect. The circumstances when a contract is subject to section 5-a are listed in Publication 223, Q&A 3. This publication is available on our Web site, by fax, or by mail. (See Need help? for more information on how to obtain this publication.) In addition, a contractor must file a new Form ST-220-CA with a covered agency before an existing contract with such agency may be renewed. If you have questions, please call our information center at 1 800 698-2931.Note: Form ST-220-CA must be signed by a person authorized to make the certification on behalf of the contractor, and the acknowledgement on page 2 of this form must be completed before a notary public.When to complete this formAs set forth in Publication 223, a contract is subject to section 5-a, and you must make the required certification(s), if: i.The procuring entity is a covered agency within the meaning of the statute (see Publication 223, Q&A 5);ii.The contractor is a contractor within the meaning of the statute (see Publication 223, Q&A 6); andiii.The contract is a contract within the meaning of the statute. This is the case when it (a) has a value in excess of $100,000 and (b) is a contract for commodities or services, as such terms are defined for purposes of the statute (see Publication 223, Q&A 8 and 9).Furthermore, the procuring entity must have begun the solicitation to purchase on or after January 1, 2005, and the resulting contract must have been awarded, amended, extended, renewed, or assigned on or after April 26, 2006 (the effective date of the section 5-a amendments).1931670278130SUBMIT THIS FORM WITH YOUR BID020000SUBMIT THIS FORM WITH YOUR BIDPage 2 of 2 ST-220-CA (6/06)Individual, Corporation, Partnership, or LLC AcknowledgmentSTATE OF}:SS.:COUNTY OF}On the day ______ of _________ in the year 20___, before me personally appeared known to me to be the person who executed the foregoing instrument, who, being duly sworn by me did depose and say that _he resides at ,Town of ,County of ,State of ; and further that:[Mark an X in the appropriate box and complete the accompanying statement.] FORMCHECKBOX (If an individual): _he executed the foregoing instrument in his/her name and on his/her own behalf. FORMCHECKBOX (If a corporation): _he is the ???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? of????????????????????????????????????????????????????????, the corporation described in said instrument; that, by authority of the Board of Directors of said corporation, _he is authorized to execute the foregoing instrument on behalf of the corporation for purposes set forth therein; and that, pursuant to that authority, _he executed the foregoing instrument in the name of and on behalf of said corporation as the act and deed of said corporation. FORMCHECKBOX (If a partnership): _he is the ???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? of????????????????????????????????????????????????????????, the partnership described in said instrument; that, by the terms of said partnership, _he is authorized to execute the foregoing instrument on behalf of the partnership for purposes set forth therein; and that, pursuant to that authority, _he executed the foregoing instrument in the name of and on behalf of said partnership as the act and deed of said partnership. FORMCHECKBOX (If a limited liability company): _he is a duly authorized member of????????????????????????????????????????????????????????????????????????? LLC, the limited liability company described in said instrument; that _he is authorized to execute the foregoing instrument on behalf of the limited liability company for purposes set forth therein; and that, pursuant to that authority, _he executed the foregoing instrument in the name of and on behalf of said limited liability company as the act and deed of said limited liability company.Notary PublicRegistration No.Privacy notificationThe Commissioner of Taxation and Finance may collect and maintain personal information pursuant to the New York State Tax Law, including but not limited to, sections 5-a, 171, 171-a, 287, 308, 429, 475, 505, 697, 1096, 1142, and 1415 of that Law; and may require disclosure of social security numbers pursuant to 42 USC 405(c)(2)(C)(i).This information will be used to determine and administer tax liabilities and, when authorized by law, for certain tax offset and exchange of tax information programs as well as for any other lawful rmation concerning quarterly wages paid to employees is provided to certain state agencies for purposes of fraud prevention, support enforcement, evaluation of the effectiveness of certain employment and training programs and other purposes authorized by law.Failure to provide the required information may subject you to civil or criminal penalties, or both, under the Tax Law.This information is maintained by the Director of Records Management and Data Entry, NYS Tax Department, W A Harriman Campus, Albany NY 12227; telephone 1 800 225-5829. From areas outside the United States and outside Canada, call (518) 485-6800.Need Help?-635-2220595Internet access: (for information, forms, and publications)-635-2027555Fax-on-demand forms: 1 800 748-3676-635-1982470Telephone assistance is available from 8:00 A.M. to 5:00 P.M. (eastern time), Monday through Friday.1 800 698-2931To order forms and publications:1 800 462-8100From areas outside the U.S. and outside Canada: (518) 485-6800Hearing and speech impaired (telecommunications device for thedeaf (TDD) callers only): 1 800 634-2110-635-1631950Persons with disabilities: In compliance with the Americans with Disabilities Act, we will ensure that our lobbies, offices, meeting rooms, and other facilities are accessible to persons with disabilities. If you have questions about special accommodations for persons with disabilities, please call 1 800 972-1233.1677670129540SUBMIT THIS FORM WITH YOUR BID020000SUBMIT THIS FORM WITH YOUR BID ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- table of contents government of new york
- the state education department the university of
- press statement albany ny
- sample invitation for bids printing ny dcjs
- hooch student worksheet chapter one town boys
- commodity ifb template government of new york
- effective team and meeting skills new york employment
- citizen action s lobbying lessons citizen action of new
Related searches
- verification of new york medical license
- product of new york pony
- city of new york benefits
- state of new york benefits
- city of new york employee benefits program
- state of new york insurance department
- bank of new york mellon mortgage
- bank of new york mellon locations
- state of new york license lookup
- bank of new york mellon phone number
- city of new york health benefits program
- state of new york psychologist license lookup