The following document was developed by theGreenTeam, Inc
This is a guidance document with sample specification language intended to be inserted into project specifications on this subject as appropriate to the agency's environmental goals. Certain provisions, where indicated, are required for U.S. federal agency projects. Sample specification language is numbered to clearly distinguish it from advisory or discussion material. Each sample is preceded by identification of the typical location in a specification section where it would appear using the SectionFormatTM of the Construction Specifications Institute; the six digit section number cited is per CSI MasterformatTM 2004 and the five digit section number cited parenthetically is per CSI MasterformatTM 1995.
SECTION 01 57 19.12 (SECTION 01353) – NOISE & ACOUSTICS MANAGEMENT
SPECIFIER NOTE:
1.1 SUMMARY
A. Section includes:
1. Special requirements for noise and acoustics management during [deconstruction] [renovation] [construction] operations.
B. Related Sections:
1. 01 30 00 (01300) - Administrative Requirements: Environmental Manager and Contractor training requirements.
2. 01 40 00 (01400) – Quality Requirements: Meetings and project coordination.
1.2 DEFINITIONS
A. Ambient noise level: The total noise associated with a given environment, being usually a composite of normal or existing sounds from all sources near and far, excluding the noise source at issue.
B. Daytime: The hours from 7 a.m. to 9 p.m. on weekdays and 9 a.m. to 9 p.m. on weekends and holidays.
C. Nighttime: All non-daytime hours.
D. Property line: The real or imaginary line along the ground surface and its vertical extension, which separates real property owned or controlled by one person from contiguous real property owned or controlled by another person or from any public right-of-way or from any public space.
E. Receiving noise area: Any real property where people live or work and where noise is heard, excluding the project or source area.
PART 2 - PRODUCTS
part 3 execution
3.1 noise MANAGEMENT
A. Noise Control: Perform [deconstruction] [renovation] [construction] operations to minimize noise. Perform noise-producing work in less sensitive hours of the day or week as directed by Owner.
B. Repetitive and/or intermittent, high-level noise: Permitted only during Daytime.
1. Do not exceed the following dB limitations:
Sound Level in dB Time Duration of Impact Noise
70 More than 12 minutes in any hour
80 More than 3 minutes in any hour
2. Provide equipment, sound-deadening devices, and take noise abatement measures that are necessary for compliance.
3. Maximum permissible construction equipment noise levels at 50 feet (dB):
EARTHMOVING dB MATERIALS HANDLING dB
Front Loaders 75 Concrete Mixers 75
Backhoes 75 Concrete Pumps 75
Dozers 75 Cranes 75
Tractors 75 Derricks Impact 75
Scrapers 80 Pile Drivers 95
Graders 75 Jack Hammers 75
Trucks 75 Rock Drills 80
Pavers, Stationary 80 Pneumatic Tools 80
Pumps 75 Saws 75
Generators 75 Vibrators 75
Compressors 75
C. Ambient Noise:
1 Maximum noise levels (dB) for receiving noise area at property line shall be as follows:
Nighttime: 60 dB
b. Commercial/Industrial receiving area Daytime: 67 dB
Nighttime: 65 dB
2. In the event the existing local ambient noise level exceeds the maximum allowable receiving noise level (dB), the receiving noise level maximum for construction operations shall be adjusted as follows:
a. Residential receiving area: Maximum 3 additional dB above the local ambient as measured at property line.
b. Commercial/Industrial receiving area: Maximum 5 additional dB above the local ambient as measured at the property line.
2. FIELD QUALITY CONTROL
A. Assess potential effects of construction noise on [adjacent neighbors] [facility occupants] in accordance with ASTM E1686 and as follows:
1. Ambient noise measurement: Measure at the property line at a height of at least four (4) feet above the immediate surrounding surface. Average the ambient noise level over a period of at least 15 minutes.
2. Ambient noise measurement at urban sites: Conduct during morning peak traffic hour between 7 A.M. and 9 A.M. and afternoon peak traffic hour between 4 P.M. and 6 P.M. In addition, conduct a 24-hour measurement at the proposed project site to document the noise pattern throughout the day. Adjust and weight for seasonal and climatic variations.
B. Monitor noise produced from construction operations in accordance with ASTM E1780.
END OF SECTION
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- the neolithic revolution was characterized by the
- what was developed during the neolithic era
- the worst part was that she was often right
- determine the range of the following graph
- find the zeros in the following equation
- simulate the execution of the following function
- i was born by the river song
- i was born by the river lyrics
- list the equipment required to measure the following and name the type of sampli
- 3 1 what are the hexadecimal bytes for the following instructions a inc dptr
- 3 1 what are the hexadecimal bytes for the following instructions
- air purifier developed by nasa