Welcome [share.ansi.org]



Itinerary/Agenda for Andean Delegation Visit to the United States

Sunday, December 4, 2016 – Arrival of Delegates

DULLES AIRPPORT PICKUP FOR ALL DELEGATES to HOTEL RL, DC - 9 ppl

HOTEL RL ADDRESS:

1823 L St NW, Washington, DC 20036

Regulators and/or Related Officials Travel to/Arrive in Washington, DC

Monday, December 5, 2016 – Meeting with the National Highway Traffic Safety Administration

The NHTSA Deputy Administrator’s Conference Room, W40-302

9:10am CAR SERVICE - PICK UP FROM HOTEL RL, DC TO NHTSA OFFICE - 9 PPL

NHTSA ADDRESS:

1200 New Jersey Avenue, SE, West Building,

Washington, DC 20590

10:00am Welcome by NHTSA Administrator – Mark R. Rosekind, Ph.D.

10:05am Welcome by ANSI, Opening of the program, Joseph Tretler Jr., VP International Policy, ANSI

10:30am Overview of DOT/NHTSA, Ezana Wondimneh, International Policy and Harmonization Division

11:00am Rulemaking process, Steve Wood, Vehicle Rulemaking and Harmonization

11:30am Q&A

11:50pm Coffee Break

12:00pm Data collection and analysis, Steven Smith, (Acting) Director of the National Center for Data and Analysis

12: 30pm Q&A

1:00pm Adjourn for Lunch in the Executive Dining Room (EDR)

2:00pm Importation of vehicles and equipment, Coleman Sachs, Import and Certification Division

2:30pm NHTSA Safety Programs and Cooperation with States – Chuck Rombro and Kristen Allen, Traffic Injury Control

3:00pm Q&A

3:30pm Adjourn

3:45pm CAR SERVICE- TRANSFER TO HOTEL RL - 9 PPL

5:30pm Dinner @ Bobby Van’s

Tuesday, December 6, 2016 – Meeting with the National Highway Traffic Safety Administration (NHTSA) and Federal Motor Carrier Safety Administration (FMCSA)

8:30am CAR SERVICE - PICK UP FROM HOTEL RL, DC TO NHTSA OFFICE - 9 PPL

NHTSA ADDRESS:

1200 New Jersey Avenue, SE, West Building,

Washington, DC 20590

9:30am Opening of Day 2- Discussion of Andean/Mexican automotive regulatory regimes

10:20am Enforcement, Bruce York, Medium and Heavy Duty Vehicle Division

10:40am Q&A

10:50am Coffee Break

11:00am NCAP, Jenny Dang, New Car Assessment Program Division

11:30am International Harmonization, Martin Koubek, International Policy and Harmonization Division

12:00pm Q&A

12:30pm Wrap-up/Photo op

12:45pm Adjourn for lunch at the Executive Dining Room (EDR)

2:00pm Welcome and introduction to Federal Motor Carrier Safety Administration (FMCSA), Marcelo Perez, Transportation Specialist, North American Borders Division

2:30pm Overview of motor carrier regulatory program, Tom Keane, FSMA

o Larry Minor, Associate Administrator for Carriers, FMCSA

o David Yessen, Policy development (Compliance, Safety, and Accountability (CSA) program)

o Marcelo Perez, Transportation Specialist, North American Borders Division

o Brian Price (CSA program)

3:00pm Discussion of vehicle inspection and driver licensing

4:00pm Adjourn

4:15pm CAR SERVICE- TRANSFER TO HOTEL RL - 9 PPL

Wednesday, December 7, 2016 – Meeting with U.S. Customs and Border Protection- Baltimore Service Port and Motor & Equipment Manufacturers Association (MEMA)

7:45am CAR SERVICE- PICK UP FROM HOTEL RL TO PORT OF BALTIMORE – 15 PPL

PORT ADDRESS:

40 S Gay St, Baltimore, MD 21202 (Roughly 1 hr. drive to Port)

9:00am U.S. Customs and Border Protection (CBP)

▪ Discussion of compliance enforcement from perspective of customs officials.

▪ Visit to operating port (Port of Baltimore)

12:00pm CAR SERVICE TO WASHINTON, DC – MEMA OFFICE - 15 PPL

MEMA ADDRESS:

1030 15th Street N.W., Suite 500 East

Washington, D.C. 20005

1:00pm Lunch

1:30pm Remanufacturing Industry Briefing

▪ Briefing on remanufacturing industry and regulations,

o John Charlifoux, Motor and Equipment Remanufacturers Association (MERA), President and COO

o George Zauflik, Cardone, Senior Vice President, Compliance, Government Relations

o John Disharoon, Director market access, Cat Reman

2:30pm Global Automotive Manufacturer Briefing

▪ Briefing from global industry on regulations

o Dennis Curry, NAVISTAR

3:30pm U.S. Environmental Protection Agency (EPA) Briefing

▪ Briefing EPA on regulations and regulatory processes

o Jim Blubaugh, Director, International Programs, Office of Transportation and Air Quality, EPA

4:45pm CAR SERVICE FROM MEETINGS TO DCA AIRPORT - 12 PPL

Evening Travel to Detroit, MI (flight departs @ 07:42pm, arrives at 9:23pm)

9:30pm CAR SERVICE FROM AIRPORT TO HYATT PLACE- Detroit, MI - 12 PPL

Hyatt Place Detroit Novi

46080 Grand River Avenue

Novi, Michigan, USA, 48374

Thursday, December 8, 2016 – Meeting at General Motors and MEMA Manufacturing Sites

8:00am CAR SERVICE FROM HYATT PLACE HOTEL TO GM SITE - 12 PPL

GENERAL MOTORS SITE ADDRESS:

Milford Proving Grounds

3300 General Motors Rd,

Milford, MI 48380

8:40am Arrive at Milford Proving Grounds- Building 104

▪ Regulatory compliance testing and safety research.

12:20pm Conclude Tour and Transfer to Building 104 Exterior for check out and departure for reman site visit #2

12:30 pm CAR SERVICE FROM SITE #1 TO LUNCH AND THEN SITE #2 - 12 PPL

1:30pm Visit to Automotive Parts Remanufacturing Facility

▪ Look at issues from a smaller firm’s perspective.

REMANUFACTURING FACILITY ADDRESS:

Electronics Remanufacturing Company, LLC

2001 Dallavo Dr Ste 101

Commerce Township, MI 48390-1653

3:00pm CAR SERVICE FROM SITE #2 TO SITE #3 - 12 PPL

4:00pm Visit to Automotive Parts Manufacturing Facility

▪ Look at issues from a smaller firm’s perspective.

SITE # 3 ADDRESS:

New OE Parts Facility

Neapco, Inc.

6735 Haggerty Rd.

Belleville, MI 48111

Evening Travel to Memphis, TN (flight @ 08:18pm, arrives at 9:26pm)

5:10 pm CAR SERVICE FROM SITE TOUR #3 TO AIRPORT - 12 PPL

10:00pm HOTEL SHUTTLE FROM AIRPORT TO COURTYARD HOTEL- MEMPHIS, TN - 12 PPL

(Shuttle leaves on demand from the property according to the top of the hour and the half hour, 24 hours a day)

Call 901-396-3600 to request hotel shuttle after gathering luggage

HOTEL ADDRESS:

Courtyard Memphis Airport

1780 Nonconnah Boulevard Memphis,

TN 38132 USA

Friday, December 9, 2016 – Meeting at Caterpillar Manufacturing Site

8:00am CAR SERVICE FROM COURTYARD HOTEL TO FIRST MEETING IN CORINTH, MS - 12 PPL

Travel to Corinth, MS (Approximately 2 hr. drive to Corinth)

CATERPILLAR SITE ADDRESS:

501 Cardinal Dr, Corinth, MS

10:00am Site Visit to Caterpillar Reman, Corinth, MS

▪ Regulatory compliance from the remanufacturing perspective

▪ Core inspection, Advanced additive manufacturing technologies, Assembly operations, Testing and verification operations

2:00pm CAR SERVICE FROM MEETINGS IN CORINTH, MS TO HOTEL IN MEMPHIS, TN- 12 PPL

Saturday, December 10, 2016 – Delegates depart U.S.

HOTEL SHUTTLE TO AIRPORT IN MEMPHIS, TN - 12 PPL

(Delegates should request shuttle service for departure flights at check-in)

Delegates:

Colombia:

• Mayra Alejandra Lancheros Barragan, Specialized Professional, Ministry of Environment and Sustainable Development

• Allan Bachenheimer Ceballos, Technical Consultant of the National Road and Safety Agency, Ministry of Transport

• Mandy Margot Betancourt Hernández, Assessor, Ministry of Trade, Industry and Tourism (MinCiT)

• Daniel Colmenares Perdomo, Auto parts and Automotive Industry Manager, Ministry of Trade, Industry and Tourism (MinCiT)

Ecuador:

• Ana Elizabeth Cox, Undersecretary of the Productivity Quality System from the Ministry of Industry

• César Eduardo Guevara Diaz, Executive Director, Ecuadorian Service for Standardization (INEN)

Mexico:

• Claudia Sama Alvarez, Standards Director, Ministry of Economy

Escorts:

• Andy Parris, International Trade Specialist, Office of Transportation and Machinery, Industry and Analysis, International Trade Administration, U.S. Department of Commerce

• Norcia Ward-Marin, Commercial Assistant, Global Markets, International Trade Administration, U.S. Department of Commerce, U.S. Embassy, Bogota

• Jessica Roop, Manager, International Policy, ANSI

• Martin Koubek, International Policy Advisor, Office of International Policy and Harmonization, National Highway Traffic Safety Administration, U.S. Department of Transportation

• Andres Castrillon, Automotive Team Leader, Office of Transportation and Machinery, Industry and Analysis, International Trade Administration, U.S. Department of Commerce

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download