Introduction



Life Cycle Assessment of Greenhouse Gas and Criteria Air Pollutant Emissions from Conventional and Biobased Marine Fuels Troy R. Hawkins1, Uisung Lee1, Michael Wang1, and Tom Thompson21Argonne National Laboratory, U.S. Dept. of Energy2Maritime Administration, U.S. Dept. of TransportationIntroduction Marine fuels are a major source of pollutant emissions. Global shipping contributes 13% of human-caused emissions of sulfur oxides (Sofiev 2018) and 2.6% of human-caused carbon dioxide emissions (Olmer 2017). The marine shipping sector is responsible for transporting 90% of world’s goods and is one of the largest consumers of petroleum fuels. Global marine fuel consumption is estimated to be around 330 million metric tons (87 billion gallons) annually and is expected to double in the next 20 years. The fuel used by the marine shipping sector is primarily heavy fuel oil (HFO), which is a residual of the refinery process which contains many of the undesirable impurities separated from other refinery products. The International Maritime Organization (IMO) has set emission targets to reduce global marine fuel sulfur content from current 3.5% to 0.5% by weight in 2020. In addition, in the U.S., the California Air Resources Board (CARB) and other state agencies have established regulations limiting the sulfur content of fuel used in coastal regions to 0.1%. These regulations will require shipowners to find alternative fuel pathways. The options include low-sulfur HFO, low-sulfur marine gas oil, installing sulfur scrubbers, or other alternative fuels/powertrains. Biofuels offer a possible alternative. The expected higher costs for low-sulfur marine fuels, other forthcoming emission regulations, and the additional processing associated with HFO, could provide a new market opportunity for biofuels, which have inherently low sulfur content and potential to reduce particulate matter emissions. In addition, biofuels offer the potential to reduce net carbon dioxide emissions due to the uptake of carbon from the atmosphere during biomass growth.The objective of this study is to estimate the life-cycle greenhouse gas (GHG) and criteria air pollutant (CAP) emissions of conventional and biobased marine fuels. This study is performed in parallel with efforts at the National Renewable Energy Laboratory and Pacific Northwest National Laboratory to estimate the potential costs of biofuel options via techno-economic analysis. The fuel options considered in the report include conventional HFO and marine gas oil as well as low sulfur versions of HFO and marine gas oil, several biofuel pathways, and natural gas. The biofuels considered in this report are considered to be potential drop in fuels compatible for use in marine engines, however further work is needed to confirm compatibility and to address any potential issues which could be caused by differences in their properties. These pathways are evaluated using a new version of the GREET marine fuels module developed for this project. This new module includes several new marine biofuel pathways as well as updated pathways for conventional marine fuels and natural gas as a marine fuel. We updated the combustion emission factors using the best available data. The scope of this study includes the well-to-hull emissions of each fuel option. Supply chain emissions are included for petroleum extraction and refining, biofuel feedstock growth, harvesting, and conversion, as well as natural gas extraction and liquefaction. Use phase emissions are based on the best available emissions factors, however in several cases conventional diesel emissions are used as a proxy for emissions from biobased diesel. The infrastructure associated with fuel production and distribution as well as fuel-specific handling requirements are outside the scope of this study. The findings of this study are meant to gauge the potential emissions benefits associated with the use of biofuels for marine transportation and to identify tradeoffs amongst fuel options.MethodLCA System BoundaryIn this study, a total of nine fuel types is considered ( REF _Ref17880113 \h Table 1). For heavy fuel oil (HFO) that is the most typical marine fuel, we considered two additional HFO with low sulfur contents (0.5% and 0.1%) along with conventional HFO with a sulfur content of 2.7%. Marine gas oil (MGO), a distillate fuel, which has relatively lower sulfur content (1.0%) than the baseline HFO is considered with two additional MGOs with low sulfur contents (0.5% and 0.1%). Marine diesel oil is considered as a mixture of HFO and MGO, which generate three types of MDO with different sulfur contents. By default, we assume to mix 50% HFO and 50% MGO by weight. Liquefied natural gas (LNG) has emerged to comply with regulations by IMO and MARPOL because of its clean combustion profile and recent competitive LNG price. Other than these conventional fossil-based marine fuels, we analyzed alternative fuel production pathways. National Renewable Energy Laboratory (NREL) provided process engineering datasets for FTD using four different feedstocks (natural gas [NG], biomass, biomass/NG, and biomass/coal), and Pacific Northwest National Laboratory (PNNL) provided process engineering datasets for pyrolysis oil from woody biomass and renewable diesel using yellow grease with and without HFO. We also include straight vegetable oil (soy oil) and biodiesel as alternative marine fuels. Table SEQ Table \* ARABIC 1. Fuel production pathways evaluated in this studyPathwaysNoteHFO (2.7% sulfur)Residual oil in GREETHFO (0.5% sulfur)Residual oil in GREET + DesulfurizationHFO (0.1% sulfur)Residual oil in GREET + DesulfurizationMGO (1.0% sulfur)Unfinished oil in GREETMGO (0.5 % sulfur)Unfinished oil in GREET+ DesulfurizationMGO (0.1 % sulfur)Unfinished oil in GREET+ DesulfurizationMDO (1.92% sulfur )Mixture of HFO 2.7%S and MGO 1.0%SMDO (0.5% sulfur)Mixture of HFO 0.5%S and MGO 0.5%SMDO (0.1% sulfur)Mixture of HFO 0.1%S and MGO 0.1%SLNGLNG in GREETFT-Diesel (NG)Newly added; data provided by NRELFT-Diesel (biomass)Newly added; data provided by NRELFT-Diesel (biomass/NG)Newly added; data provided by NRELFT-Diesel (biomass/coal)Newly added; data provided by NRELPyrolysis oil (woody biomass)Newly added; data provided by PNNLRenewable diesel (yellow grease/HFO)Newly added; data provided by PNNLRenewable diesel (yellow grease)Newly added; data provided by PNNLStraight Vegetable Oil (SVO)Soy oil in GREETBiodieselBiodiesel in GREETIn order to compare the life-cycle GHG and CAP emissions for these marine fuels, it is essential to have a consistent system boundary with reliable datasets. The Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET?) model ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"a2eg9s7s984","properties":{"formattedCitation":"[1]","plainCitation":"[1]","noteIndex":0},"citationItems":[{"id":3153,"uris":[""],"uri":[""],"itemData":{"id":3153,"type":"book","title":"Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) Model","source":"Google Scholar","author":[{"literal":"Argonne"}],"issued":{"date-parts":[["2018"]]}}}],"schema":""} [1] is a tool with significant datasets enabling a systematic LCA of various transportation fuels. This model includes all processes associated with feedstock recovery, feedstock transportation, fuel production, fuel transportation, and fuel combustion. Since the analysis covers from feedstock recovery (well) to pump (WTP) and pump-to-hull (fuel combustion) (PTH), we call life-cycle of marine fuels as well-to-hull (WTH) ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"a9eo35jeas","properties":{"formattedCitation":"[2]","plainCitation":"[2]","noteIndex":0},"citationItems":[{"id":3224,"uris":[""],"uri":[""],"itemData":{"id":3224,"type":"article-journal","title":"Life cycle analysis of conventional and alternative marine fuels in GREET","container-title":"Energy Systems Devision. Argonne National Laboratory, Argonne, IL","page":"58","source":"Google Scholar","author":[{"family":"Adom","given":"Felix"},{"family":"Dunn","given":"Jennifer B."},{"family":"Elgowainy","given":"Amgad"},{"family":"Han","given":"Jeongwoo"},{"family":"Wang","given":"Michael"}],"issued":{"date-parts":[["2013"]]}}}],"schema":""} [2]. WTP of petroleum products (HFO, MGO, and MDO) include crude oil recovery, crude oil transportation, crude oil refining for HFO and MGO production, and fuel transportation. All the parameters for these processes are from GREET ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"PpHcQfdj","properties":{"formattedCitation":"[1]","plainCitation":"[1]","noteIndex":0},"citationItems":[{"id":3153,"uris":[""],"uri":[""],"itemData":{"id":3153,"type":"book","title":"Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) Model","source":"Google Scholar","author":[{"literal":"Argonne"}],"issued":{"date-parts":[["2018"]]}}}],"schema":""} [1] which are mainly based on the studies by Elgowainy et al. ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"a2plp8tbsl6","properties":{"formattedCitation":"[3]","plainCitation":"[3]","noteIndex":0},"citationItems":[{"id":748,"uris":[""],"uri":[""],"itemData":{"id":748,"type":"article-journal","title":"Energy Efficiency and Greenhouse Gas Emission Intensity of Petroleum Products at U.S. Refineries","container-title":"Environmental Science & Technology","page":"7612-7624","volume":"48","issue":"13","source":"ACS Publications","abstract":"This paper describes the development of (1) a formula correlating the variation in overall refinery energy efficiency with crude quality, refinery complexity, and product slate; and (2) a methodology for calculating energy and greenhouse gas (GHG) emission intensities and processing fuel shares of major U.S. refinery products. Overall refinery energy efficiency is the ratio of the energy present in all product streams divided by the energy in all input streams. Using linear programming (LP) modeling of the various refinery processing units, we analyzed 43 refineries that process 70% of total crude input to U.S. refineries and cover the largest four Petroleum Administration for Defense District (PADD) regions (I, II, III, V). Based on the allocation of process energy among products at the process unit level, the weighted-average product-specific energy efficiencies (and ranges) are estimated to be 88.6% (86.2%?91.2%) for gasoline, 90.9% (84.8%?94.5%) for diesel, 95.3% (93.0%?97.5%) for jet fuel, 94.5% (91.6%?96.2%) for residual fuel oil (RFO), and 90.8% (88.0%?94.3%) for liquefied petroleum gas (LPG). The corresponding weighted-average, production GHG emission intensities (and ranges) (in grams of carbon dioxide-equivalent (CO2e) per megajoule (MJ)) are estimated to be 7.8 (6.2?9.8) for gasoline, 4.9 (2.7?9.9) for diesel, 2.3 (0.9?4.4) for jet fuel, 3.4 (1.5?6.9) for RFO, and 6.6 (4.3?9.2) for LPG. The findings of this study are key components of the life-cycle assessment of GHG emissions associated with various petroleum fuels; such assessment is the centerpiece of legislation developed and promulgated by government agencies in the United States and abroad to reduce GHG emissions and abate global warming.","DOI":"10.1021/es5010347","ISSN":"0013-936X","journalAbbreviation":"Environ. Sci. Technol.","author":[{"family":"Elgowainy","given":"Amgad"},{"family":"Han","given":"Jeongwoo"},{"family":"Cai","given":"Hao"},{"family":"Wang","given":"Michael"},{"family":"Forman","given":"Grant S."},{"family":"DiVita","given":"Vincent B."}],"issued":{"date-parts":[["2014",7,1]]}}}],"schema":""} [3] and Forman et al. ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"alrbeh3ddl","properties":{"formattedCitation":"[4]","plainCitation":"[4]","noteIndex":0},"citationItems":[{"id":810,"uris":[""],"uri":[""],"itemData":{"id":810,"type":"article-journal","title":"U.S. Refinery Efficiency: Impacts Analysis and Implications for Fuel Carbon Policy Implementation","container-title":"Environmental Science & Technology","page":"7625-7633","volume":"48","issue":"13","source":"ACS Publications","abstract":"In the next two decades, the U.S. refining industry will face significant changes resulting from a rapidly evolving domestic petroleum energy landscape. The rapid influx of domestically sourced tight light oil and relative demand shifts for gasoline and diesel will impose challenges on the ability of the U.S. refining industry to satisfy both demand and quality requirements. This study uses results from Linear Programming (LP) modeling data to examine the potential impacts of these changes on refinery, process unit, and product-specific efficiencies, focusing on current baseline efficiency values across 43 existing large U.S. refineries that are operating today. These results suggest that refinery and product-specific efficiency values are sensitive to crude quality, seasonal and regional factors, and refinery configuration and complexity, which are determined by final fuel specification requirements. Additional processing of domestically sourced tight light oil could marginally increase refinery efficiency, but these benefits could be offset by crude rebalancing. The dynamic relationship between efficiency and key parameters such as crude API gravity, sulfur content, heavy products, residual upgrading, and complexity are key to understanding possible future changes in refinery efficiency. Relative to gasoline, the efficiency of diesel production is highly variable, and is influenced by the number and severity of units required to produce diesel. To respond to future demand requirements, refiners will need to reduce the gasoline/diesel (G/D) production ratio, which will likely result in greater volumes of diesel being produced through less efficient pathways resulting in reduced efficiency, particularly on the marginal barrel of diesel. This decline in diesel efficiency could be offset by blending of Gas to Liquids (GTL) diesel, which could allow refiners to uplift intermediate fuel streams into more efficient diesel production pathways, thereby allowing for the efficient production of incremental barrels of diesel without added capital investment for the refiner. Given the current wide range of refinery carbon intensity values of baseline transportation fuels in LCA models, this study has shown that the determination of refinery, unit, and product efficiency values requires careful consideration in the context of specific transportation fuel GHG policy objectives.","DOI":"10.1021/es501035a","ISSN":"0013-936X","title-short":"U.S. Refinery Efficiency","journalAbbreviation":"Environ. Sci. Technol.","author":[{"family":"Forman","given":"Grant S."},{"family":"Divita","given":"Vincent B."},{"family":"Han","given":"Jeongwoo"},{"family":"Cai","given":"Hao"},{"family":"Elgowainy","given":"Amgad"},{"family":"Wang","given":"Michael"}],"issued":{"date-parts":[["2014",7,1]]}}}],"schema":""} [4]. For LNG production, WTP covers both conventional NG and shale gas recovery, NG processing, transportation, and liquefaction which are documented in the earlier papers ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"a1a7t9c16i2","properties":{"formattedCitation":"[5\\uc0\\u8211{}7]","plainCitation":"[5–7]","noteIndex":0},"citationItems":[{"id":802,"uris":[""],"uri":[""],"itemData":{"id":802,"type":"article-journal","title":"Life-cycle greenhouse gas emissions of shale gas, natural gas, coal, and petroleum","container-title":"Environmental science & technology","page":"619–627","volume":"46","issue":"2","source":"Google Scholar","author":[{"family":"Burnham","given":"Andrew"},{"family":"Han","given":"Jeongwoo"},{"family":"Clark","given":"Corrie E."},{"family":"Wang","given":"Michael"},{"family":"Dunn","given":"Jennifer B."},{"family":"Palou-Rivera","given":"Ignasi"}],"issued":{"date-parts":[["2011"]]}}},{"id":3198,"uris":[""],"uri":[""],"itemData":{"id":3198,"type":"article-journal","title":"Wells to wheels: Environmental implications of natural gas as a transportation fuel","container-title":"Energy Policy","page":"565–578","volume":"109","author":[{"family":"Cai","given":"Hao"},{"family":"Burnham","given":"Andrew"},{"family":"Chen","given":"Rui"},{"family":"Wang","given":"Michael"}],"issued":{"date-parts":[["2017"]]}}},{"id":3194,"uris":[""],"uri":[""],"itemData":{"id":3194,"type":"article","title":"Updated natural gas pathways in the GREET1_2018 model","URL":"","author":[{"literal":"Andrew Burnham"}],"issued":{"date-parts":[["2018",10]]},"accessed":{"date-parts":[["2019",8,28]]}}}],"schema":""} [5–7]. For the parameters of the new fuel production processes (FTD, pyrolysis oil, and renewable diesel), we documented inputs and outputs of the processes in the following sections. For SVO, we used parameters of soy oil production in GREET, and biodiesel is assumed to be 100% from soybean via transesterification. In case there are products other than marine fuels, energy allocation is used. For global warming potential (GWP) values, the Fifth Assessment Report (AR5) of the Intergovernmental Panel on Climate Change (IPCC) was used ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"akbnapm6qk","properties":{"formattedCitation":"[8]","plainCitation":"[8]","noteIndex":0},"citationItems":[{"id":219,"uris":[""],"uri":[""],"itemData":{"id":219,"type":"report","title":"IPCC Fifth Assessment Report","author":[{"literal":"IPCC"}],"issued":{"date-parts":[["2013"]]}}}],"schema":""} [8]. All fuel specifications are presented in REF _Ref18351169 \h Table A1. Production of HFO and MGO with Low Sulfur ContentResidual oil and unfinished oil in GREET are used for HFO (2.7% sulfur) and MGO (1.0% sulfur), respectively. In order for production of low sulfur marine fuels via desulfurization, additional processes with hydrogen inputs are required. Due to limited information to perform simulations to estimate additional inputs and allocated emissions, we used a regression equation to estimate hydrogen inputs. McKetta ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"a2ki1akiu6","properties":{"formattedCitation":"[9]","plainCitation":"[9]","noteIndex":0},"citationItems":[{"id":3204,"uris":[""],"uri":[""],"itemData":{"id":3204,"type":"book","title":"Petroleum Processing Handbook","publisher":"CRC Press","publisher-place":"New York","number-of-pages":"792","edition":"1 edition","source":"Amazon","event-place":"New York","abstract":"A reference that details the pertinent chemical reactions and emphasizes the plant design and operations of petroleum processing procedures. The handbook is divided into four sections: products, refining, manufacturing processes, and treating processes. Wherever possible, shortcut methods of calcula","ISBN":"978-0-8247-8681-6","language":"English","editor":[{"family":"J","given":"McKetta Jr","suffix":"John"}],"issued":{"date-parts":[["1992",4,30]]}}}],"schema":""} [9] summarized hydrogen requirements for desulfurization of atmospheric tower bottoms, which shows desulfurizing 3.8% sulfur feed to 1.0%, 0.3%, and 0.1% require 497, 650, 725 scf/bbl, respectively. These can be converted into 0.245, 0.320, and 0.357 MJ H2 for MJ of fuel production. With these and the baseline 3.8% sulfur fuel, we generated a regression equation (2nd order polynomial) among sulfur input, sulfur output, and hydrogen requirement ( REF _Ref18393191 \h Figure 1). Estimated additional hydrogen requirements for HFO from 2.7% sulfur to 0.5% sulfur and 0.1% sulfur become 15,664 and 19,448 J H2/MJ of fuel, respectively. Similarly, for MGO from 1.0% sulfur to 0.5% sulfur and 0.1% sulfur, hydrogen requirements are estimated at 4,325 and 8,109 J H2/MJ of fuel, respectively. These hydrogen inputs were added along with other inputs for fuel production to estimate all upstream energy use and emissions. For MDO, we assumed it is a mixture of 50 vol.% HFO and 50 vol.% MGO; all related parameters were averaged between HFO and MGO on an energy input basis. Figure SEQ Figure \* ARABIC 1. Hydrogen requirement for desulfurization from atmospheric tower bottoms with a sulfur content of 3.8%.Production of Fischer-Tropsch DieselNREL developed FT-marine diesel production pathways using four feedstocks (biomass, NG, biomass/NG, and biomass/coal) through process models; life-cycle inventory (LCI) data is presented in REF _Ref17889267 \h Table 2 ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"a28hgpkvud9","properties":{"formattedCitation":"[10]","plainCitation":"[10]","noteIndex":0},"citationItems":[{"id":3228,"uris":[""],"uri":[""],"itemData":{"id":3228,"type":"report","title":"Economic Analysis of Renewable Fuels for Marine Propulsion","publisher":"National Renewable Energy Laboratory","URL":"","number":"NREL/TP-5100-74678","author":[{"literal":"Eric Tan"},{"literal":"Ling Tao"}],"issued":{"date-parts":[["2019",9]]},"accessed":{"date-parts":[["2019",9,18]]}}}],"schema":""} [10]. For two co-feeding pathways, biomass and fossil feedstocks are assumed to be fed 50%/50% by weight. Feedstocks are converted into syngas in a gasifier, which is then synthesized through FT catalytic conversion processes. Detailed process descriptions can be found in ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"a2ifom3r2n9","properties":{"formattedCitation":"[10,11]","plainCitation":"[10,11]","noteIndex":0},"citationItems":[{"id":3228,"uris":[""],"uri":[""],"itemData":{"id":3228,"type":"report","title":"Economic Analysis of Renewable Fuels for Marine Propulsion","publisher":"National Renewable Energy Laboratory","URL":"","number":"NREL/TP-5100-74678","author":[{"literal":"Eric Tan"},{"literal":"Ling Tao"}],"issued":{"date-parts":[["2019",9]]},"accessed":{"date-parts":[["2019",9,18]]}}},{"id":3229,"uris":[""],"uri":[""],"itemData":{"id":3229,"type":"article-journal","title":"Economic and environmental potentials for natural gas to enhance biomass-to-liquid fuels technologies","container-title":"Green Chemistry","page":"5358-5373","volume":"20","issue":"23","source":"pubs.","abstract":"With the increased availability of low-cost natural gas (NG), co-conversion of natural gas and biomass-to-liquid (GBtL) fuels has gained interest from industry and the U.S. Department of Energy due to the potential to improve liquid fuel yields while lowering greenhouse gas (GHG) emissions. In this article, we explore the conceptual process design and cost comparison of liquid biofuels using both biomass-derived gas intermediates and natural gas, as well as studies on quantification and assessment of sustainability metrics including life cycle/GHG emissions. Additionally, we have performed sensitivity analysis to understand the impact from variations of the biomass-to-NG ratio, design assumptions, and NG prices on process economics. This is to understand key cost drivers, parameters influencing the environment, and to discover opportunities to optimize the use of NG along with biomass. Our analysis shows that different blending ratios of natural gas/biomass have a large effect on the economic and environmental performance of the GBtL fuels. Co-processing NG enables the economic feasibility of converting biomass to the liquid fuel but at the expense of environmental sustainability. This study determined that the maximum amount of NG that can be blended with biomass would be 28% to meet the Renewable Fuel Standard (RFS) GHG emission targets for advanced fuels, with a resulting minimum fuel selling price (MFSP) of $2.75 per gallon gasoline equivalent (GGE). In addition, the paper demonstrates the impact of the co-conversion operation on equipment design, raw materials, utility consumption, and overall process economic performance for the GBtL system. A secondary outcome: This study shows that renewable liquid fuel could be cost competitive with fossil-derived liquid fuel if further improvements and optimizations could be made to blending ratios of NG, optimization of heat integration of the process, and reduction of excess hydrogen and excess electricity production.","DOI":"10.1039/C8GC01257A","ISSN":"1463-9270","journalAbbreviation":"Green Chem.","language":"en","author":[{"family":"Zhang","given":"Yanan"},{"family":"Sahir","given":"Asad H."},{"family":"Tan","given":"Eric C. D."},{"family":"Talmadge","given":"Michael S."},{"family":"Davis","given":"Ryan"},{"family":"Biddy","given":"Mary J."},{"family":"Tao","given":"Ling"}],"issued":{"date-parts":[["2018",11,26]]}}}],"schema":""} [10,11]. Through condensation and separation, various types of hydrocarbon fuels can be generated including marine/diesel fuels. In particular, FT hydrocarbon fuels have no sulfur content since fuel products are generated from syngas. Table SEQ Table \* ARABIC 2. Inputs and outputs of Fischer-Tropsch diesel production UnitsFeedstockBiomassNGBiomass+NGBiomass+CoalEnergy inputs Woody residueMJ1.9700.4340.644dry g108023.835.3Natural GasMJ0.001.521.240CoalMJ0.00000.836DieselJ1,5289241,2451,535Natural Gas (process fuel)J0.000.000.000.00HydrogenJ0.0000563,589ElectricityJ0.00071WaterL0.1730.0580.0550.348Chemicals/Catalysts?????Magnesium Oxide (MgO)mg13.350.002.944.36Olivinemg306.490.0067.510.00Tar Reformer Catalystmg13.204.975.5714.40Zinc Oxide (ZnO) Catalystmg3.441.962.241.92FT Synthesis Catalyst (Co based)mg2.510.871.341.36Hydrotreating Catalyst (sulfided CoMo or NiMo)mg3.241.842.582.65LO-CAT Chemicalsmg74.340.0016.24728.42Amine Make-Upmg0.023.725.3553.19Boiler Chemicalsmg0.410.240.112.74Cooling Tower Chemsmg2.490.971.121.59Products?????Marine/DieselMJ0.180.110.140.18JetMJ0.400.230.310.38NaphthaMJ0.310.200.270.33WaxMJ0.120.070.090.11HydrogenMJ0.000.400.190.00Mass ratio?????Fossil?%0%100%51%51%Biomass?%100%0%49%49%Production of Pyrolysis OilLCI data for bio-oil production via fast pyrolysis process are estimated based on the process modeling and simulation performed at PNNL ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"a11604rodmc","properties":{"formattedCitation":"[12]","plainCitation":"[12]","noteIndex":0},"citationItems":[{"id":454,"uris":[""],"uri":[""],"itemData":{"id":454,"type":"report","title":"Process design and economics for the conversion of lignocellulosic biomass to hydrocarbon fuels: fast pyrolysis and hydrotreating bio-oil pathway","publisher":"National Renewable Energy Laboratory (NREL), Golden, CO.","source":"Google Scholar","URL":"","title-short":"Process design and economics for the conversion of lignocellulosic biomass to hydrocarbon fuels","author":[{"family":"Jones","given":"Susanne"},{"family":"Meyer","given":"P."},{"family":"Snowden-Swan","given":"L."},{"family":"Padmaperuma","given":"A."},{"family":"Tan","given":"Eric"},{"family":"Dutta","given":"Abhijit"},{"family":"Jacobson","given":"Jacob"},{"family":"Cafferty","given":"Kara"}],"issued":{"date-parts":[["2013"]]},"accessed":{"date-parts":[["2015",6,3]]}}}],"schema":""} [12]. The bio-oil production is designed as a standalone process with a capacity of 2,000 dry metric tons per day. Woody biomass is sent to a dryer to reduce its moisture content from 30% to 10% before it is fed to a circulating fluidized bed pyrolyzer where hot sand is used as a heat carrier for endothermic fast pyrolysis reaction. Biomass is converted into a mixture of vapors and char within less than two seconds. The sand and char are subsequently separated from the vapors by a series of cyclones. The hot vapors are rapidly quenched in a two-stage system with previously condensed and cooled bio-oil and non-condensable gases are separated from the condensed bio-oil. In the first stage, most of the condensable products are removed using recirculated and indirect air-cooled bio-oil. The second stage operates at a lower temperature by indirect water cooling of the recirculating bio-oil. Most of the gases are recycled back to the pyrolysis reactor to assist fluidization. Char and a small portion of non-condensable gas are burned to heat the circulating sand. Hot flue gas from the char and gas burner is used to dry wet biomass. Two sets of LCI data are generated based on ash content (0.9% and 1.9% by weight) of the feedstock. The assumptions of this process design, product compositions, and product yields can be found in the previous study ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"kZpPdM9i","properties":{"formattedCitation":"[12]","plainCitation":"[12]","noteIndex":0},"citationItems":[{"id":454,"uris":[""],"uri":[""],"itemData":{"id":454,"type":"report","title":"Process design and economics for the conversion of lignocellulosic biomass to hydrocarbon fuels: fast pyrolysis and hydrotreating bio-oil pathway","publisher":"National Renewable Energy Laboratory (NREL), Golden, CO.","source":"Google Scholar","URL":"","title-short":"Process design and economics for the conversion of lignocellulosic biomass to hydrocarbon fuels","author":[{"family":"Jones","given":"Susanne"},{"family":"Meyer","given":"P."},{"family":"Snowden-Swan","given":"L."},{"family":"Padmaperuma","given":"A."},{"family":"Tan","given":"Eric"},{"family":"Dutta","given":"Abhijit"},{"family":"Jacobson","given":"Jacob"},{"family":"Cafferty","given":"Kara"}],"issued":{"date-parts":[["2013"]]},"accessed":{"date-parts":[["2015",6,3]]}}}],"schema":""} [12].Table SEQ Table \* ARABIC 3. Inputs and outputs of pyrolysis oil production using woody biomassUnitsLow ash-feedstock caseHigh ash-feedstock caseInputs?Feedstock (Woody biomass)MJ1.491.61g80.788.0ElectricityJ31,06242,788Cooling tower chemicalsmg0.1280.137Product??Pyrolysis oilMJ1.001.00Production of Renewable Diesel REF _Ref17904550 \h Table 4 presents the LCI of renewable diesel production via hydroprocessed esters and fatty acids (HEFA) using yellow grease with and without HFO co-feed developed by NREL ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"a1n94l7j70m","properties":{"formattedCitation":"[10]","plainCitation":"[10]","noteIndex":0},"citationItems":[{"id":3228,"uris":[""],"uri":[""],"itemData":{"id":3228,"type":"report","title":"Economic Analysis of Renewable Fuels for Marine Propulsion","publisher":"National Renewable Energy Laboratory","URL":"","number":"NREL/TP-5100-74678","author":[{"literal":"Eric Tan"},{"literal":"Ling Tao"}],"issued":{"date-parts":[["2019",9]]},"accessed":{"date-parts":[["2019",9,18]]}}}],"schema":""} [10]. HEFA processes can generate diesel-like fuels from various types of oil feedstocks. Oil feedstocks are processed through hydrogenation, hydrocracking, and product separation processes. Hydrogen is mainly used for both hydrogenation and hydrocracking processes. Detailed process information can be found in the previous NREL studies ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"ac6ij6hidt","properties":{"formattedCitation":"[10,13]","plainCitation":"[10,13]","noteIndex":0},"citationItems":[{"id":3228,"uris":[""],"uri":[""],"itemData":{"id":3228,"type":"report","title":"Economic Analysis of Renewable Fuels for Marine Propulsion","publisher":"National Renewable Energy Laboratory","URL":"","number":"NREL/TP-5100-74678","author":[{"literal":"Eric Tan"},{"literal":"Ling Tao"}],"issued":{"date-parts":[["2019",9]]},"accessed":{"date-parts":[["2019",9,18]]}}},{"id":3232,"uris":[""],"uri":[""],"itemData":{"id":3232,"type":"article-journal","title":"Techno-economic and resource analysis of hydroprocessed renewable jet fuel","container-title":"Biotechnology for biofuels","page":"261","volume":"10","issue":"1","source":"Google Scholar","author":[{"family":"Tao","given":"Ling"},{"family":"Milbrandt","given":"Anelia"},{"family":"Zhang","given":"Yanan"},{"family":"Wang","given":"Wei-Cheng"}],"issued":{"date-parts":[["2017"]]}}}],"schema":""} [10,13].Table SEQ Table \* ARABIC 4. Inputs and outputs of renewable diesel production using yellow grease with and without HFO co-feed?UnitsYellow greaseYellow grease with HFOEnergy Inputs??Feedstock (Yellow Grease)MJ1.210.51g30.412.9HFO (co-feed)MJ0.000.51HydrogenJ77,14650,835Natural GasJ79,10985,602ElectricityJ11,1938,467CatalystsHydrotreating catalystmg3.172.97Isomerization/Hydrocracking catalystmg0.520.53WaterL0.210.20Products??Marine/DieselMJ0.010.18JetMJ0.690.48GasolineMJ0.220.26PropaneMJ0.080.08Emissions from Fuel UseAmong the fuel supply chain stages, combustion emissions contribute the most life-cycle emissions. Combustion emissions are dependent on fuel properties, engine characteristics, and control technologies [Billings personal communication] ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"ahohgvq9eu","properties":{"formattedCitation":"[14]","plainCitation":"[14]","noteIndex":0},"citationItems":[{"id":3059,"uris":[""],"uri":[""],"itemData":{"id":3059,"type":"report","title":"Third IMO Greenhouse Gas Study 2014","publisher-place":"Suffolk, UK","source":"Google Scholar","event-place":"Suffolk, UK","URL":"","author":[{"literal":"IMO"}],"issued":{"date-parts":[["2015"]]},"accessed":{"date-parts":[["2018",12,5]]}}}],"schema":""} [14] ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"a2ltrah8qn7","properties":{"formattedCitation":"[15]","plainCitation":"[15]","noteIndex":0},"citationItems":[{"id":3219,"uris":[""],"uri":[""],"itemData":{"id":3219,"type":"article-journal","title":"Natural gas as a marine fuel","container-title":"Energy Policy","page":"153-167","volume":"87","source":"ScienceDirect","abstract":"This paper provides new knowledge about the life-cycle emissions of natural gas compared to traditional petroleum-based fuels in the marine sector. While natural gas will reduce local air pollutants, such as sulfur oxides and particulate matter, the implications for greenhouse gases depend on how the natural gas is extracted, processed, distributed, and used. Applying a “technology warming potential” (TWP) approach, natural gas as a marine fuel achieves climate parity within 30 years for diesel ignited engines, though could take up to 190 years to reach climate parity with conventional fuels in a spark ignited engine. Movement towards natural gas as a marine fuel continues to progress, and conditions exist in some regions to make a near-term transition to natural gas feasible. Liquefied natural gas in marine transportation is likely to be incentivized where economics favoring natural gas is coupled with air emissions public policy targets. To ensure that climate neutral conversion is achieved with the least delay, TWP results highlight the important role of energy policy for infrastructure development of upstream pathways and onboard ship systems technology innovation.","DOI":"10.1016/j.enpol.2015.08.027","ISSN":"0301-4215","journalAbbreviation":"Energy Policy","author":[{"family":"Thomson","given":"Heather"},{"family":"Corbett","given":"James J."},{"family":"Winebrake","given":"James J."}],"issued":{"date-parts":[["2015",12,1]]}}}],"schema":""} [15]. REF _Ref18353893 \h Table 5 summarizes the emission factors used in this study and the corresponding data sources. It shows emission factors vary by engine types as well as fuel types. We include five major engine types (Slow-Speed Diesel [SSD], Medium-Speed Diesel [MSD], Steam Turbine [ST], Gas Turbine [GT], and LNG) and thee auxiliary engine types (MSD, High-Speed Diesel [HSD], and LNG). Due to strict regulations on NOx, the emission factors of NOx are highly dependent on regulations. SOx emissions are estimated based on sulfur content of fuels assuming 97.75% of sulfur is emitted as SOx and the rest (2.247%) becomes sulfate in PM10 emissions. The emission factors of PM10 in REF _Ref18353893 \h Table 5 represent base PM without considering PM from sulfur in marine fuels. Note that the emission factors of PM2.5 are calculated as 92% of those of PM10 ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"a28kdtmh2au","properties":{"formattedCitation":"[16]","plainCitation":"[16]","noteIndex":0},"citationItems":[{"id":3222,"uris":[""],"uri":[""],"itemData":{"id":3222,"type":"book","title":"Regulatory impact analysis: control of emissions of air pollution from category 3 marine diesel engines","publisher":"US Environmental Protection Agency (EPA) USA","source":"Google Scholar","URL":"","title-short":"Regulatory impact analysis","author":[{"literal":"EPA"}],"issued":{"date-parts":[["2009"]]},"accessed":{"date-parts":[["2019",9,2]]}}}],"schema":""} [16]. CO2 emissions are estimated based on carbon balance assuming all carbon in fuels are emitted as VOC, CO, CH4, and CO2. Due to limited information for the emission factors of other fuels (diesel, SVO, and pyrolysis oil), we used the same emission factors of MGO/MDO. The emission factors of LNG show that overall LNG vessels would generate lower CAP emissions compared to petroleum-based fuels except for CH4 emissions (CH4 slip) ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"a2k75mb4as7","properties":{"formattedCitation":"[15]","plainCitation":"[15]","noteIndex":0},"citationItems":[{"id":3219,"uris":[""],"uri":[""],"itemData":{"id":3219,"type":"article-journal","title":"Natural gas as a marine fuel","container-title":"Energy Policy","page":"153-167","volume":"87","source":"ScienceDirect","abstract":"This paper provides new knowledge about the life-cycle emissions of natural gas compared to traditional petroleum-based fuels in the marine sector. While natural gas will reduce local air pollutants, such as sulfur oxides and particulate matter, the implications for greenhouse gases depend on how the natural gas is extracted, processed, distributed, and used. Applying a “technology warming potential” (TWP) approach, natural gas as a marine fuel achieves climate parity within 30 years for diesel ignited engines, though could take up to 190 years to reach climate parity with conventional fuels in a spark ignited engine. Movement towards natural gas as a marine fuel continues to progress, and conditions exist in some regions to make a near-term transition to natural gas feasible. Liquefied natural gas in marine transportation is likely to be incentivized where economics favoring natural gas is coupled with air emissions public policy targets. To ensure that climate neutral conversion is achieved with the least delay, TWP results highlight the important role of energy policy for infrastructure development of upstream pathways and onboard ship systems technology innovation.","DOI":"10.1016/j.enpol.2015.08.027","ISSN":"0301-4215","journalAbbreviation":"Energy Policy","author":[{"family":"Thomson","given":"Heather"},{"family":"Corbett","given":"James J."},{"family":"Winebrake","given":"James J."}],"issued":{"date-parts":[["2015",12,1]]}}}],"schema":""} [15]. Table SEQ Table \* ARABIC 5. Emission factors (g/kWh operation)Emission Regulation TierMain engineAux. engineSSDMSDSTGTLNGMSDHSDLNGVOC (HC)a-0.60.50.10.10.50.40.40COa-1.41.10.20.21.301.10.91.3NOxHFOa018.1142.16.1-14.711.6-117131310.4215.311.211.28.233.42.622.6MGO/MDOa01713.22.05.710.913.811612.29.812.2214.410.57.710.533.42.622.6LNGc-----1.82--1.82PM10*HFOa-0.5760.5760.930.06-0.5760.576-MGO/MDOa-0.1550.1550.160.01-0.1550.155-LNGc-----0.04--0.04CH4HFO/MDO b-0.0120.010.0020.002-0.0080.008LNGc-----5.050.0080.0085.05N2ObHFO/MDO b-0.0310.0340.0490.0490.0360.036-LNGc-----0.015--0.015SSD: Slow-Speed Diesel, MSD: Medium-Speed Diesel, ST: Steam Turbine, GT: Gas Turbine, HSD: High-Speed Diesel* PM10 does not include PM converted from sulfur. It is estimated that 2.247% of sulfur in fuels is converted into additional PM10.References: a Billings [personal communication], b IMO 2014 ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"aJHceEZO","properties":{"formattedCitation":"[14]","plainCitation":"[14]","noteIndex":0},"citationItems":[{"id":3059,"uris":[""],"uri":[""],"itemData":{"id":3059,"type":"report","title":"Third IMO Greenhouse Gas Study 2014","publisher-place":"Suffolk, UK","source":"Google Scholar","event-place":"Suffolk, UK","URL":"","author":[{"literal":"IMO"}],"issued":{"date-parts":[["2015"]]},"accessed":{"date-parts":[["2018",12,5]]}}}],"schema":""} [14], c Thomson et al. ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"5OSrpz3B","properties":{"formattedCitation":"[15]","plainCitation":"[15]","noteIndex":0},"citationItems":[{"id":3219,"uris":[""],"uri":[""],"itemData":{"id":3219,"type":"article-journal","title":"Natural gas as a marine fuel","container-title":"Energy Policy","page":"153-167","volume":"87","source":"ScienceDirect","abstract":"This paper provides new knowledge about the life-cycle emissions of natural gas compared to traditional petroleum-based fuels in the marine sector. While natural gas will reduce local air pollutants, such as sulfur oxides and particulate matter, the implications for greenhouse gases depend on how the natural gas is extracted, processed, distributed, and used. Applying a “technology warming potential” (TWP) approach, natural gas as a marine fuel achieves climate parity within 30 years for diesel ignited engines, though could take up to 190 years to reach climate parity with conventional fuels in a spark ignited engine. Movement towards natural gas as a marine fuel continues to progress, and conditions exist in some regions to make a near-term transition to natural gas feasible. Liquefied natural gas in marine transportation is likely to be incentivized where economics favoring natural gas is coupled with air emissions public policy targets. To ensure that climate neutral conversion is achieved with the least delay, TWP results highlight the important role of energy policy for infrastructure development of upstream pathways and onboard ship systems technology innovation.","DOI":"10.1016/j.enpol.2015.08.027","ISSN":"0301-4215","journalAbbreviation":"Energy Policy","author":[{"family":"Thomson","given":"Heather"},{"family":"Corbett","given":"James J."},{"family":"Winebrake","given":"James J."}],"issued":{"date-parts":[["2015",12,1]]}}}],"schema":""} [15]Fuel Consumption Marine fuel consumption presented as brake-specific fuel consumption (BSFC) or specific fuel oil consumption (SFOC) also varies by fuel and engine types. The information is important to estimate the energy use for a trip. Additionally, since SOx and CO2 emissions are estimated based on sulfur and carbon balances, respectively, fuel consumption values are used to estimate SOx and CO2 emissions. We used SFOC data from the IMO 2014 report ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"a1gs8urk6c0","properties":{"formattedCitation":"[14]","plainCitation":"[14]","noteIndex":0},"citationItems":[{"id":3059,"uris":[""],"uri":[""],"itemData":{"id":3059,"type":"report","title":"Third IMO Greenhouse Gas Study 2014","publisher-place":"Suffolk, UK","source":"Google Scholar","event-place":"Suffolk, UK","URL":"","author":[{"literal":"IMO"}],"issued":{"date-parts":[["2015"]]},"accessed":{"date-parts":[["2018",12,5]]}}}],"schema":""} [14] ( REF _Ref18394536 \h Table 6). The fuel consumption values (g fuel/kWh operation) of MGO/MDO were converted into energy consumption (Btu/kWh operation); the same energy consumption values are used for diesel fuels. Table SEQ Table \* ARABIC 6. Specific fuel oil consumption by engine and fuel types (g fuels/kWh operation) ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"NSskQsWZ","properties":{"formattedCitation":"[14]","plainCitation":"[14]","noteIndex":0},"citationItems":[{"id":3059,"uris":[""],"uri":[""],"itemData":{"id":3059,"type":"report","title":"Third IMO Greenhouse Gas Study 2014","publisher-place":"Suffolk, UK","source":"Google Scholar","event-place":"Suffolk, UK","URL":"","author":[{"literal":"IMO"}],"issued":{"date-parts":[["2015"]]},"accessed":{"date-parts":[["2018",12,5]]}}}],"schema":""} [14]Main engineHFOMGO/MDOLNGSSD195.0185.0?MSD215.0205.0ST305.0300.0GT305.0300.0LNG166.0Aux engineHFOMGO/MDO?HSD227.0217.0MSD227.0217.0LNG??166.0Trip CharacteristicsVarious marine vessels are operated to serve different purposes, which incurs different trip profiles. In order to evaluate the WTH emissions of trips, vessel types and corresponding trip characteristics should be defined. Adom et al. ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"am3v24grc7","properties":{"formattedCitation":"[2]","plainCitation":"[2]","noteIndex":0},"citationItems":[{"id":3224,"uris":[""],"uri":[""],"itemData":{"id":3224,"type":"article-journal","title":"Life cycle analysis of conventional and alternative marine fuels in GREET","container-title":"Energy Systems Devision. Argonne National Laboratory, Argonne, IL","page":"58","source":"Google Scholar","author":[{"family":"Adom","given":"Felix"},{"family":"Dunn","given":"Jennifer B."},{"family":"Elgowainy","given":"Amgad"},{"family":"Han","given":"Jeongwoo"},{"family":"Wang","given":"Michael"}],"issued":{"date-parts":[["2013"]]}}}],"schema":""} [2] characterized trips for three vessel types (bulk, container-large, and tanker VLCC [Very Large Crude Carriers]) in different regions (Pacific, Atlantic, Gulf of Mexico, Great Lakes, and California waters). The trips consist of several segments (hotel, reduced-speed zones [RSZ], cruise), and trip information such as distance, speed, time in mode, load factor, and payload for each segment were characterized ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"am3v24grc7","properties":{"formattedCitation":"[2]","plainCitation":"[2]","noteIndex":0},"citationItems":[{"id":3224,"uris":[""],"uri":[""],"itemData":{"id":3224,"type":"article-journal","title":"Life cycle analysis of conventional and alternative marine fuels in GREET","container-title":"Energy Systems Devision. Argonne National Laboratory, Argonne, IL","page":"58","source":"Google Scholar","author":[{"family":"Adom","given":"Felix"},{"family":"Dunn","given":"Jennifer B."},{"family":"Elgowainy","given":"Amgad"},{"family":"Han","given":"Jeongwoo"},{"family":"Wang","given":"Michael"}],"issued":{"date-parts":[["2013"]]}}}],"schema":""} [2]. In this study, we used the trip information by Adom et al. ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"am3v24grc7","properties":{"formattedCitation":"[2]","plainCitation":"[2]","noteIndex":0},"citationItems":[{"id":3224,"uris":[""],"uri":[""],"itemData":{"id":3224,"type":"article-journal","title":"Life cycle analysis of conventional and alternative marine fuels in GREET","container-title":"Energy Systems Devision. Argonne National Laboratory, Argonne, IL","page":"58","source":"Google Scholar","author":[{"family":"Adom","given":"Felix"},{"family":"Dunn","given":"Jennifer B."},{"family":"Elgowainy","given":"Amgad"},{"family":"Han","given":"Jeongwoo"},{"family":"Wang","given":"Michael"}],"issued":{"date-parts":[["2013"]]}}}],"schema":""} [2] to evaluate the WTH GHG and CAP emissions for each trip. Note that we can select different fuels for each trip segment in GREET, which is useful to manage emission profiles. Results and Discussion Life-cycle GHG and CAP Emissions REF _Ref18143450 \h Figure 2 presents life-cycle GHG emissions of 19 cases, which include feedstock production and transportation (feedstock), fuel production and fuel transportation (conversion), and fuel use (combustion); for biomass-derived fuels, biogenic carbon uptake emissions are considered as emission credits. The sum of these stages becomes WTH GHG emissions. The functional unit is MJ of marine fuel produced and utilized, and the values in REF _Ref18143450 \h Figure 2 present relative differences compared to the baseline HFO (2.7% sulfur). All diesel results are based on emission factors of MSD with NOx regulations for Tier 3, while results can be generated using emission factors of other engine types. Figure SEQ Figure \* ARABIC 2. WTH GHG emissions of marine fuels pathways. The numbers present emissions relative to baseline (HFO 2.7% sulfur) emissions. MSD engines. MSD engines under IMO emission regulation tier of three are assumed to be used. First, WTH GHG emissions of the baseline HFO (2.7% sulfur) and MGO (1.0% sulfur) are estimated at 95.5 and 88.9 gCO2/MJ, respectively, and combustion emissions take around 85% of total WTH GHG emissions. Low sulfur petroleum-derived marine fuels have slightly higher WTH GHG emissions due to additional hydrogen inputs. HFO (1.0% sulfur) and MGO (1.0% sulfur) have WTH GHG emissions of 97.3 and 89.7 gCO2e/MJ, respectively, which are 1.9% and 0.9% higher compared to those of HFO (2.7% sulfur) and MGO (1.0% sulfur). Fuel combustion emissions are dependent on carbon contents which do not show significant variations (except for pyrolysis oil with very low heating value [ REF _Ref18351169 \h Table A1]); main differences in WTH emissions are from other factors such as emissions during fuel production, biogenic carbon contents, and CH4 leakages. For NG uses, REF _Ref18143450 \h Figure 2c shows corresponding pathways (LNG and FTD using NG) involve significantly higher CH4 emissions compared to other pathways. Due to CH4’s high GWP, CH4 emissions magnify the overall WTH GHG emissions. In particular, LNG involves significantly high CH4 emissions throughout its supply chain. While WTH CO2 emissions of the LNG pathway is estimated at 65.4 g/MJ, which is 28.0% lower than HFO (2.7% sulfur), WTH GHG emissions are 94.0 gCO2e/MJ, similar to those of HFO (2.7% sulfur) due to contribution of CH4 emissions ( REF _Ref18143450 \h Figure 2d); only 0.916 g CH4/MJ contributes 29.2% of its WTH GHG emissions. In particular, CH4 slip during downstream combustion significantly influences LNG’s WTH GHG emissions ADDIN ZOTERO_ITEM CSL_CITATION {"citationID":"a1k2qkflp0s","properties":{"formattedCitation":"[15]","plainCitation":"[15]","noteIndex":0},"citationItems":[{"id":3219,"uris":[""],"uri":[""],"itemData":{"id":3219,"type":"article-journal","title":"Natural gas as a marine fuel","container-title":"Energy Policy","page":"153-167","volume":"87","source":"ScienceDirect","abstract":"This paper provides new knowledge about the life-cycle emissions of natural gas compared to traditional petroleum-based fuels in the marine sector. While natural gas will reduce local air pollutants, such as sulfur oxides and particulate matter, the implications for greenhouse gases depend on how the natural gas is extracted, processed, distributed, and used. Applying a “technology warming potential” (TWP) approach, natural gas as a marine fuel achieves climate parity within 30 years for diesel ignited engines, though could take up to 190 years to reach climate parity with conventional fuels in a spark ignited engine. Movement towards natural gas as a marine fuel continues to progress, and conditions exist in some regions to make a near-term transition to natural gas feasible. Liquefied natural gas in marine transportation is likely to be incentivized where economics favoring natural gas is coupled with air emissions public policy targets. To ensure that climate neutral conversion is achieved with the least delay, TWP results highlight the important role of energy policy for infrastructure development of upstream pathways and onboard ship systems technology innovation.","DOI":"10.1016/j.enpol.2015.08.027","ISSN":"0301-4215","journalAbbreviation":"Energy Policy","author":[{"family":"Thomson","given":"Heather"},{"family":"Corbett","given":"James J."},{"family":"Winebrake","given":"James J."}],"issued":{"date-parts":[["2015",12,1]]}}}],"schema":""} [15]. Fuels from biomass have significantly lower WTH GHG emissions mainly due to their biogenic carbon credits. Depending on the share of biogenic carbon, emission reduction rates vary. For example, marine fuel production using both fossil and biomass feedstocks (50% and 50% by weight), WTH GHG emission reductions in GHG emissions compared to HFO (2.7% sulfur) are estimated at 40–45%. Biofuels produced from 100% biomass have much higher reductions in GHG emissions (67–93%). REF _Ref18147299 \h Figure 3 presents major WTH CAP emissions (SOx, NOx, PM2.5, and CO), which shows that the combustion stage is dominant for CAP emissions. SOx emissions are dependent on sulfur contents in marine fuels; thus, desulfurization reduces life-cycle SOx emissions significantly ( REF _Ref18147299 \h Figure 3a) while slightly increases WTH GHG emissions ( REF _Ref18143450 \h Figure 2a). The baseline HFO (2.7% sulfur) has WTH SOx emissions of 1.35 g/MJ, and low sulfur HFOs with 0.5% and 0.1% have WTH SOx emissions of 0.26 and 0.06 g/MJ, respectively, which are 81% and 95% lower than the baseline HFO, respectively. MGO (1.0% sulfur) has SOx emissions of 0.47 g/MJ, and this can be reduced to 0.24 and 0.06 g/MJ through desulfurization to 0.5% and 0.1%, respectively. Biomass-derived fuels are mostly free of sulfur leading to significant reductions in SOx emissions (97–100%) except for renewable diesel from yellow grease with HFO inputs (1.51% sulfur) because of sulfur from HFO. PM emissions mainly consist of base PM and PM derived from sulfur. For NOx and CO emissions, all fuels are within a relatively narrow boundary, except for LNG. LNG shows 25% lower NOx emissions and 28% higher CO emissions. Note that the results may vary depending on the types of engines and emission regulation tiers. Figure SEQ Figure \* ARABIC 3. WTH CAP emissions. The numbers present emissions relative to baseline (HFO 2.7% sulfur) emissions. MSD engines under IMO emission regulation tier of three are assumed to be used.WTH GHG emissions of trips vary by the types of marine vessels and corresponding trip characteristics as well as fuel types ( REF _Ref19792452 \h Figure 4). Here, domestic and international trips of three types of marine vessels in Pacific using two different fuels (FT-marine diesel [biomass] and HFO [0.5% sulfur]) are presented as an example. More detailed analyses are available using GREET by setting trip parameters and fuel types for each trip segment. Due to its low carbon intensity (g CO2/MJ), FT-diesel (biomass) generates much lower GHG emissions for the same trip conditions as expected. However, trip characteristics results in significant differences in WTH GHG emission results mainly due to the differences in fuel consumption (operation hours). When it comes to million MT-km results, tanker VLCC emissions become smaller mainly due to its high payload and longer distance compared to others. a)b)Figure 4. WTH GHG emissions (per trip and per million MT-km) for example trip conditions using FT-marine diesel (biomass) and HFO (0.5% sulfur). Three marine vessel types for domestic and international trips in Pacific are presented. Variations in WTH CAP emissions depending on vessel types and trip characteristics are presented in REF _Ref19792452 \h Figure 5. Figure SEQ Figure \* ARABIC 5. WTH GHG and CAP emissions for example trip conditions using FT-marine diesel. These are for three marine vessel types (bulk, tanker, and container) for two trip conditions in Pacific (domestic and international). The numbers presented right hand side of each chart represent total emissions during the trip. AcknowledgmentsThis research effort was supported by the Maritime Administration of the U.S.?Department of Transportation under interagency agreement 6937JF718N000041 with the U.S. Department of Energy. The views and opinions of the authors expressed herein do not necessarily state or reflect those of the U.S. Government or any agency thereof. Neither the U.S. Government nor any agency thereof, nor any of their employees, makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. References ADDIN ZOTERO_BIBL {"uncited":[],"omitted":[],"custom":[]} CSL_BIBLIOGRAPHY [1]Argonne. Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) Model. 2018.[2]Adom F, Dunn JB, Elgowainy A, Han J, Wang M. Life cycle analysis of conventional and alternative marine fuels in GREET. Energy Syst Devision Argonne Natl Lab Argonne IL 2013:58.[3]Elgowainy A, Han J, Cai H, Wang M, Forman GS, DiVita VB. Energy Efficiency and Greenhouse Gas Emission Intensity of Petroleum Products at U.S. Refineries. Environ Sci Technol 2014;48:7612–24. doi:10.1021/es5010347.[4]Forman GS, Divita VB, Han J, Cai H, Elgowainy A, Wang M. U.S. Refinery Efficiency: Impacts Analysis and Implications for Fuel Carbon Policy Implementation. Environ Sci Technol 2014;48:7625–33. doi:10.1021/es501035a.[5]Burnham A, Han J, Clark CE, Wang M, Dunn JB, Palou-Rivera I. Life-cycle greenhouse gas emissions of shale gas, natural gas, coal, and petroleum. Environ Sci Technol 2011;46:619–627.[6]Cai H, Burnham A, Chen R, Wang M. Wells to wheels: Environmental implications of natural gas as a transportation fuel. Energy Policy 2017;109:565–578.[7]Andrew Burnham. Updated natural gas pathways in the GREET1_2018 model 2018.[8]IPCC. IPCC Fifth Assessment Report. 2013.[9]J MJ John, editor. Petroleum Processing Handbook. 1 edition. New York: CRC Press; 1992.[10]Eric Tan, Ling Tao. Economic Analysis of Renewable Fuels for Marine Propulsion. National Renewable Energy Laboratory; 2019.[11]Zhang Y, Sahir AH, Tan ECD, Talmadge MS, Davis R, Biddy MJ, et al. Economic and environmental potentials for natural gas to enhance biomass-to-liquid fuels technologies. Green Chem 2018;20:5358–73. doi:10.1039/C8GC01257A.[12]Jones S, Meyer P, Snowden-Swan L, Padmaperuma A, Tan E, Dutta A, et al. Process design and economics for the conversion of lignocellulosic biomass to hydrocarbon fuels: fast pyrolysis and hydrotreating bio-oil pathway. National Renewable Energy Laboratory (NREL), Golden, CO.; 2013.[13]Tao L, Milbrandt A, Zhang Y, Wang W-C. Techno-economic and resource analysis of hydroprocessed renewable jet fuel. Biotechnol Biofuels 2017;10:261.[14]IMO. Third IMO Greenhouse Gas Study 2014. Suffolk, UK: 2015.[15]Thomson H, Corbett JJ, Winebrake JJ. Natural gas as a marine fuel. Energy Policy 2015;87:153–67. doi:10.1016/j.enpol.2015.08.027.[16]EPA. Regulatory impact analysis: control of emissions of air pollution from category 3 marine diesel engines. US Environmental Protection Agency (EPA) USA; 2009.Appendix ATable A SEQ Table_A \* ARABIC 1. Fuel SpecificationsUnitsHFO (2.7% sulfur)HFO (0.5% sulfur)HFO (0.1% sulfur)MDO (1.92% sulfur )MDO (0.5% sulfur)MDO (0.1% sulfur)MGO (1.0% sulfur)MGO (0.5 % sulfur)MGO (0.1 % sulfur)Lower heating valueMJ/kg39.539.539.541.041.041.042.842.842.8Densitykg/L0.991.01.00.910.910.910.840.840.84C ratio% by wt.879090878787878787S ratio% by wt.2.700.500.101.920.500.101.000.500.10Biogenic carbon share% by wt.0%0%0%0%0%0%0%0%0%UnitsFT-Diesel (NG)Liquefied Natural Gas (LNG)FT-Diesel (Biomass&Coal)Renewable diesel (Yellow grease&HFO)FT-Diesel (Biomass&NG)Straight Vegetable Oil (SVO)Pyrolysis oil (Woody biomass)FT-Diesel (Biomass)Renewable diesel (Yellow grease)BiodieselLower heating valueMJ/kg43.248.6343.244.043.237.21543.244.037.5Densitykg/L0.80.430.80.780.8?0.800.780.89C ratio% by wt.90759087907841858778S ratio% by wt.0.000.000.001.510.000.000.000.000.000.00Biogenic carbon share% by wt.0%0%49%50%49%100%100%100%100%100% ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download