DEPARTMENT OF DEVELOPMENTAL SERVICES WEST REGION ...
[Pages:60]DEPARTMENT OF DEVELOPMENTAL SERVICES WEST REGION
INVITATION TO BID
? PROJECT # and PROJECT TITLE:
BI-DDS-541 ASPHALT SHINGLE ROOF REPLACEMENT
? MANDATORY PRE-BID MEETING TO BE HELD ON: 2 Opportunities
Wednesday April 7, 2010 @ 10 AM Friday April 9, 2010 @ 10 AM
? PRE-BID MEETING TO BE HELD AT:
Clapboard Ridge CLA 22 Clapboard Ridge Danbury, CT
? REQUESTS FOR CLARIFICATION, QUESTIONS CONCERNING SCOPE OF WORK, AND PROPOSED SUBSTITUTION(S) OF PRODUCTS ARE DUE TO THE FACILITIES
REPRESENTATIVE BY: Monday April 19, 2010 @ 2 PM
? (OPTIONAL) SITE VIST for CLARIFICATIONS, QUESTIONS AND FINAL
MEASUREMENTS To be determined at pre-bid.
? CLARIFICATION AND ANSWERS TO QUESTIONS WILL BE POSTED ON THE DAS WEB PORTAL BY: Thursday April 22, 2010 @ 4 PM
? BID OPENING DATE AND TIME: Friday April 30, 2010 @ 2 PM
? DDS FACILITY REPRESENTATIVE:
ROBERT KLINGNER, PLANT FACILITIES ENGINEER Phone# 203-806-8762 Fax @ 203-271-1352 Email: Robert.Klingner@
? DDS BUSINESS OFFICE REPRESENTATIVE:
LAUREN MARZIARZ, FAO 104 SOUTH TURNPIKE ROAD WALLINGFORD, CT 06492 PHONE# 203-294-5167 FAX# 203-294-0220 EMAIL: Lauren. Marziarz@
All bids will be received at the date, time, and place (Business Office) specified and thereafter publicly opened and read aloud. The Department of Developmental Services is an Equal Employment/Affirmative Action Organization and will not knowingly do business with an organization/contractor that is or has been found to discriminate.
1
TABLE OF CONTENTS
Bidding Requirements ? Instructions to Bidders Bid Form Pre-Bid Representative Form Experience, References, & Sub-Contractors Form CHRO Contract Compliance Regulations Bidder Contract Compliance Monitoring Report Vendor Affidavit ? Greater than or equal to $50,000 Consulting Agreement Affidavit Contractors Wage Certification Form ? Contracts greater than/equal to 100,000 Contractor's Campaign Contribution and Solicitation Ban OSHA Training Requirements ? Contracts greater than/equal to 100,000 Instructions to Bidders General Conditions Compliance with Executive Orders
Technical Specifications / Scope of Work
Page # 3 4-5 6 7 8-9 10-11 12 13 14 15 15 19-25 26-30 31-32
(attached)
2
BIDDING REQUIREMENTS - INSTRUCTIONS TO BIDDERS
** Failure to complete and submit any of the required forms, documents, or information will result in rejection of your bid. Should this occur, your bid will be deemed non-responsive and rejected. DDS reserves the right to not award this contract in whole or in part. Conditional bids will also be rejected. A conditional bid is defined as one limiting or modifying any of the terms and conditions and/or specifications.
Forms REQUIRED to be submitted AT BID OPENING WITH all bids
** BID FORM
((2 pages, (attached))
REQUIRED bond or check to be submitted AT BID OPENING WITH bids equal to or greater than $10,000
** BID BOND OR CERTIFIED CHECK per section IB. 1.11
Additional forms REQUIRED to be submitted WITH all bids equal to or greater than $100,000
** CONTRACTORS WAGE CERTIFICATION FORM (Dept. of Labor prevailing wage requirements) per section IB 1.10 ((1 page, attached))
The following forms / documents are required to be submitted after bid opening, by lowest bidder only, before Purchase Order can be issued. These forms must be submitted either along with your bid, or, within 5 business days of being informed you are the lowest bidder. If not received within 5 business days, your bid may be deemed non-responsive and may be rejected. It is strongly encouraged to submit these forms / documents, along with your bid, to administratively accelerate the issuance of a Purchase Order.
BIDDER CONTRACT COMPLIANCE MONITORING REPORT ((2 pages, attached)) PROOF OF INSURANCE per section IB. 1.12 PROOF OF REQUIRED CERTIFICATIONS AND TRADE LICIENCES GIFT AND CAMPAIGN CONTRIBUTION CERTIFICATION ((1 page, attached)) (Required if this bid exceeds
$50,000, or, if this bid causes the sum total of your previous contracts with DDS, in a calendar or fiscal year, to exceed $50,000).
PRE-BID REPRESENTATIVE FORM ((1 page, attached)) EXPERIENCE, REFERENCES, & SUB-CONTRACTORS FORM ((1 page, attached)) PERFORMANCE, LABOR, & MATERIAL BONDS (Required for projects equal to or greater than $50,000) (Note: this form not required or suggested to be submitted with bid, but is required before issuance of PO). PROOF OF COMPLETION OF THE 10-HOUR OSHA CONSTRUCTION SAFETY AND HEALTH COURSE - PER Public Act No. 06-175 (Required for projects equal to or greater than $100,000)
3
BID FORM (page 1 of 2)
TO: FOR:
Business Office ? West Region Department of Developmental Services 104 South Turnpike Road Wallingford, CT 06492
Project #: Project Title: Location:
BI-DDS-541 Asphalt Shingle Roof Replacement Clapboard Ridge CLA 22 Clapboard Ridge Danbury, CT
FROM: (Company Name) ________________________________________________ In compliance with the Instruction to Bidders & Conditions of Bid (section I.B. 1.09), and subject to all conditions thereof, the undersigned offers and agrees to furnish all labor and materials and to complete work called for by the project's technical specifications within the allotted time of ( 45 ) calendar days for the Lump Sum of:
BASE BID: WORDS:
________________________________________________________
DOLLARS Figures: ($______________________________).
NOTE: A bid surety of not less than 10% of base bid amount is required to accompany bid in the form of a bond or certified check made out to the "Comptroller of the State of Connecticut" if base bid exceeds $10,000. Failure to provide this bid surety will result in rejection of this bid.
4
BID FORM (page 2 of 2)
The General Contractor on this project will be required to perform not less than ( 50% ) of the completed dollar value of the work with its own forces.
I (we), the undersigned, hereby declare that I am (we are) the only person(s) interested in this bid: That it is made without any connection with any other person making any bid for the same work: that no person acting for, or employed by, the State of Connecticut is directly or indirectly interested in this bid, or in any contract which may be made under it, or in expected profits to arise there from; that this bid is made without directly or indirectly influencing or attempting to influence any other person or corporation to bid or to refrain from bidding or to influence the amount of the bid of any other person or corporation: that this bid is made in good faith without collusion or connection with any other person bidding for the same work; and that this bid is made with distinct reference and relation to the plans and specifications prepared for this contract.
I (we) further declare that in regard to the conditions affecting the work to be done and the labor and materials needed, this bid is based solely on my (our) own investigation and research and not in reliance upon any representations of any employee, officer or agent of the State.
I have carefully read, understand and will comply with all of the above Project Terms and Conditions, Security Regulations and Scope of Work. I have received and incorporated all Addendums (if any) posted on the DAS Web Portal and have incorporated these within the bid.
Contractor Owner/Officer __________________________________________ Date: _______________
Title __________________________________________
Company Name __________________________________________
Address __________________________________________
City, State Zip __________________________________________
Phone # _____________ Fax # ________________ FEIN# _____________________
Email Address: _______________________________________
Signature: _______________________________________
Contractor Owner/Officer
Subscribed and sworn to before me this________________day of_______________,20__________
___________________________________ Notary Public
** END OF SECTION - BID FORM **
5
PRE-BID REPRESENTATIVE FORM
_______________________________________________was represented at the pre-bid meeting (Company Name)
held on ______________________________by_______________________________________
(date of meeting)
(name of representative)
and, therefore, we are fully responsible for all information, site conditions, and other items discussed at the meeting.
__________________________________________ Signature
___________________________________________ Title
___________________________________________ Date
6
EXPERIENCE, REFERENCES, & SUB-CONTRACTORS FORM
EXPERIENCE / REFERENCES
** Reference IB 1.06 (Contractor Qualification Requirement) List similar type installations/projects completed in the last 18 months (at least 2).
Customer Name (Company) Contact Person
Phone #
Address of Job Type of Work Performed
1. _____________________________________________________________________________________________________________________________
2. ___________________________________________________________________________________________________________________
3. ___________________________________________________________________________________________________________________
Sub-Contractors
List Sub-Contractors to be used on this project.
Sub-Contractor's Company Name
Contact Person
Phone #
% of Work by Type of Work to be Sub-Contractor Performed (Maximum 50%)
1. _____________________________________________________________________________________________________________________________
2. ___________________________________________________________________________________________________________________
3. ___________________________________________________________________________________________________________________
7
COMMISSION ON HUMAN RIGHTS AND OPPORTUNITIES CONTRACT COMPLIANCE REGULATIONS NOTIFICATION TO BIDDERS
(Revised 09/17/07)
The contract to be awarded is subject to contract compliance requirements mandated by Sections 4a-60 and 4a-60a of the Connecticut General Statutes; and, when the awarding agency is the State, Sections 46a-71(d) and 46a-81i(d) of the Connecticut General Statutes. There are Contract Compliance Regulations codified at Section 46a-68j-21 through 43 of the Regulations of Connecticut State Agencies, which establish a procedure for awarding all contracts covered by Sections 4a-60 and 46a-71(d) of the Connecticut General Statutes.
According to Section 46a-68j-30(9) of the Contract Compliance Regulations, every agency awarding a contract subject to the contract compliance requirements has an obligation to "aggressively solicit the participation of legitimate minority business enterprises as bidders, contractors, subcontractors and suppliers of materials." "Minority business enterprise" is defined in Section 4a-60 of the Connecticut General Statutes as a business wherein fifty-one percent or more of the capital stock, or assets belong to a person or persons: "(1) Who are active in daily affairs of the enterprise; (2) who have the power to direct the management and policies of the enterprise; and (3) who are members of a minority, as such term is defined in subsection (a) of Section 32-9n." "Minority" groups are defined in Section 32-9n of the Connecticut General Statutes as "(1) Black Americans . . . (2) Hispanic Americans . . . (3) persons who have origins in the Iberian Peninsula . . . (4)Women . . . (5) Asian Pacific Americans and Pacific Islanders; (6) American Indians . . ." An individual with a disability is also a minority business enterprise as provided by Section 4a-60g of the Connecticut General Statutes. The above definitions apply to the contract compliance requirements by virtue of Section 46a-68j-21(11) of the Contract Compliance Regulations.
The awarding agency will consider the following factors when reviewing the bidder's qualifications under the contract compliance requirements:
(a) the bidder's success in implementing an affirmative action plan; (b) the bidder's success in developing an apprenticeship program complying with Sections 46a-68-1 to 46a-68-17
of the Administrative Regulations of Connecticut State Agencies, inclusive; (c) the bidder's promise to develop and implement a successful affirmative action plan; (d) the bidder's submission of employment statistics contained in the "Employment Information Form",
indicating that the composition of its workforce is at or near parity when compared to the racial and sexual composition of the workforce in the relevant labor market area; and (e) the bidder's promise to set aside a portion of the contract for legitimate minority business enterprises. See Section 46a-68j-30(10)(E) of the Contract Compliance Regulations. ___________________________________________________________________________________________
INSTRUCTIONS AND OTHER INFORMATION
The following BIDDER CONTRACT COMPLIANCE MONITORING REPORT must be completed in full, signed, and submitted with the bid for this contract. The contract awarding agency and the Commission on Human Rights and Opportunities will use the information contained thereon to determine the bidders compliance to Sections 4a-60 and 4a-60a CONN. GEN. STAT., and Sections 46a-68j-23 of the Regulations of Connecticut State Agencies regarding equal employment opportunity, and the bidders good faith efforts to include minority business enterprises as subcontractors and suppliers for the work of the contract.
1)
Definition of Small Contractor
Section 4a-60g CONN. GEN. STAT. defines a small contractor as a company that has been doing business under the same management and control
and has maintained its principal place of business in Connecticut for a one year period immediately prior to its application for certification under
this section, had gross revenues not exceeding ten million dollars in the most recently completed fiscal year, and at least fifty-one percent of the
ownership of which is held by a person or persons who are active in the daily affairs of the company, and have the power to direct the management
and policies of the company, except that a nonprofit corporation shall be construed to be a small contractor if such nonprofit corporation meets the
requirements of subparagraphs (A) and (B) of subdivision 4a-60g CONN. GEN. STAT.
2). Minority & Small Business Set-Aside Program A minimum of 6.25 percent (6.25%) of each contract awarded to a Small Business Enterprise shall be reserved for Minority Business Enterprises (MBE). Note: Minority Business Enterprises includes Women Business Enterprises. Exceptions: 1) If a project involves a specialty trade, for which no registered certified contractor can qualify to submit a bid, the contract may be awarded to a non-set-aside contractor; 2) If a project involves a specialty trade, for which no certified contractor can qualify as a subcontractor then the contract can be awarded without the (6.25%) MBE requirement; 3) If the contractor performs more than ninety-three and three quarter's percent (93.75%) of the work then the (6.25%) MBE requirement can be waived.
8
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- asphalt hazard summary how to determine if you are being
- a b martin roofing supply building products metal
- contact your branch for availability available at all
- pro guard 20 synthetic underlayment roll pallet specs
- department of developmental services west region
- general information of the asphalt emulsion manufacturers
- timberline hd shingles gaf
- atlas homeowner shingle guide srs distribution inc
- boral roof tiles build something great roof tiles
- customer name date abc supply
Related searches
- department of financial services nys
- department of public services california
- department of financial services wisconsin
- department of social services sacramento
- department of social services pomona
- florida department of financial services licensee search
- florida department of financial services fl
- department of disability services oklahoma
- department of financial services new york
- department of financial services florida hr
- department of financial services ny
- oklahoma department of developmental services