Wester's Garage - Home of all Custom Tunes



Update Information- 7.1 UPDATE- 7.2 UPDATE INFORMATION- 7.2 UPDATE- 7.4 UPDATE- 8.0 UPDATE- 9.0 UPDATE- 10.0 UPDATE- 11.2 Press Release- 14.0 UPDATE*** 7.1 UPDATE ***AutoEnginuity would like to announce the release of the 7.1 version of it's popular ScanTool software. The ScanTool 7.1 release carries on the tradition of closing any remaining gaps in our Domestic and Asian coverage. Coverage now includes Subaru body systems, Toyota now supports body and chassis controller update rates as much as 10x faster, Honda System Test descriptions are now provided as is support for the Crank Pattern Clear and Learn test, and Aston Martin added the DB9 and Vanquish model support.02/19/2009 7.1 Release:Enhanced Aston-Martin (Ford) support:Added '03 DB7 Vantage full model year supportAdded '07 - '08 DB9 enhanced powertrain coverageAdded '03 - '06 Vanquish full systems coverageAdded 'full Mode 6 support for DB7, DB9, and Vanquish models?Enhanced Chrysler-family support:Improved communication for AE Enhanced Rev 2 connectors on NGC-based modelsAdded missing transmission entry for the '04 Dodge IntrepidAdded the ability for the user to manually enter the Pinion Factor for VPW-based modulesAdded more 'EATX / JTEC Transmission Parameters' group sensors for '01-'05 JTEC engine controllersAdded Cylinder Contribution sensors for the '04 - '05 Cummins?Enhanced Ford-family support:Improved Powerstroke 7.3L ABS support by only showing the bi-directional controls used for this modelAdded all some missing IPATS sensors for the Enhanced Powertrain CAN systemFixed Powerstroke 7.3L ECM crashing during sensor retrieval?Enhanced GM-family support:Improved Communication for GM CAN sensor retrievalAdded VSES for Chassis '00 - '05 Passenger product line H, Buick and PontiacAdded VSES for '03 - '04 Cadillac D CTSAdded Chassis controller support for '05 - '07 Cadillac STS product line DAdded missing transmission for the 5.7 Liter L31 product line K Chevy 2500 '00Added missing Hummer H1 support from '04 and '06Added Workhorse support for Engine and Transmission for '06-'08Added Workhorse W20Series supportAdded Fuel Pump Control Module supportFixed issue with retrieving trouble codes on '06 CAN based Duramax Powertrain modules (requires AE Firmware 28)?Enhanced Honda-family support:Added missing System Test descriptions and operations instructionsAdded Civic 5 Door ABS specific support '06 - '08Added Crank Pattern Clear/Learn Test for CAN-specific vehiclesAdded Tire Pressure Module SystemAdded Accord '08+ based SRS module addressingChanged the ABS Sensor Calibration Test into a single test called 'Calibrates All Sensors'?Enhanced Subaru support:Added Airbag full system supportAdded Occupant Detection System full system supportAdded Integrated Unit Module full system support?Enhanced Toyota-family support:Added missing ABS CAN PID supportImproved Active Front Steering, Driver Seat, Passenger Seat, Sliding Roof, TPWS, Meter, Mirror Right, Mirror Left, Tilt and Telescope, Back Door sensor support by implementing PID tables to remove sensors that are not supported by the current controllerImproved all body controller data rates by handling the System Busy responses quickerFixed TPWS ID 5 sensors not workingFixed trouble code retrieval from single CAN responses losing the last byte in the response*** 7.2 UPDATE INFORMATION ***Link to AutoEnginuity Letter: *** 7.2 UPDATE ***Greetings!AutoEnginuity would like to announce the release of the 7.2 version of it's popular ScanTool software. The ScanTool 7.2 release is the long awaited update to our enhanced European coverage. Enhanced Porsche now updates to include live data and bi-directional support for 60+ controllers. Enhanced BMW adds 40+ new controllers for the E6X and E9X up to '08 models support. Enhanced Mercedes and Audi/VW are released with the most competitive after-market implementations yet. Finally, last but certainly not least, GM transmission data stream has been completed and we are the first to introduce the GM single-wire CAN body systems.To achieve the advances in our coverage and data rates we required new hardware called the ProLine hardware. All of the new European support requires the new ProLine hardware to operate. ProLine customers can purchase the full European package for 1199.95 USD (SP07-2). This package will also include the hardware upgrade from the AE Enhanced to the new ProLine hardware. All other customers wanting the new ProLine hardware can purchase the AC12 for 199.95 USD and upgrade their AE Enhanced hardware. Finally, the ProLine hardware will also eliminate the need for the BMW and Porsche pigtail adaptors. The hardware can now electrically switch pins as necessary.The Audi/VW expansion (EI16), Porsche expansion (EI13), and Mercedes expansion are 230 USD each and available plete details for this release can be found on our site here: highlights include:04/15/2009 7.2 Release:Enhanced Audi / VW support:AdaptationCoding II/Login (7-digit PIN/SKC not supportedFreeze FrameLoginModule Recoding (Soft and Long)Module InformationModule Sensor MappingNetwork TestOutput Test (Automatic and Specific)SRI ResetEven CAN support with Gateway List, Optical Bus Diagnostics, etc.?Enhanced BMW / MINI support:Improved BMW data rates by a factor of 4 when using the new ProLine ConnectorAdded enhanced 3 Series (E90/E91/E92/E93) '06 - '08 full model support (Requires ProLine Connector)Added enhanced 5 Series (E60/E61) '04 - '08 full model support (Requires ProLine Connector)Added enhanced 6 Series (E63/E64) '04 - '08 full model support (Requires ProLine Connector)Added enhanced 7 Series (E65/E66) '02 - '08 full model support (Requires ProLine Connector)Added enhanced Z4 M Series (E85/E66) '06 - '08 MS70 S54 engine supportAdded MINI R50/R52/R53 full IKE bi-directional support including service reset functionsAdded Conditional Based Service (CBS) for E6X and E9X models (Requires ProLine Connector)Finalized VIN decoding for models to include determining the engine seriesFixed 330Xi and 330Xd tables being swapped?Enhanced Chrysler-family support:Improved Powerstroke 7.3L ABS support by only showing the bi-directional controls used for this modelAdded all some missing IPATS sensors for the Enhanced Powertrain CAN systemFixed Powerstroke 7.3L ECM crashing during sensor retrieval?Enhanced GM-family support:Added Single-Wire CAN based modules (Requires ProLine Connector)Added bitmapped and state sensors for VPW-based Transmission modulesAdded CAN CKP Test support adding support for 33 more enginesAdded Injector Flow Rate Reprogramming for '06 Duramax 6.6 LiterAdded Glow Plug Control module support?Enhanced Mercedes support:Added enhanced C Class '98 - '08 full model support (Requires ProLine Connector)Added enhanced CL Class '98 - '08 full model support (Requires ProLine Connector)Added enhanced CLK Class '97 - '08 full model support (Requires ProLine Connector)Added enhanced CLS Class '04 - '08 full model support (Requires ProLine Connector)Added enhanced E Class '98 - '08 full model support (Requires ProLine Connector)Added enhanced G Class '98 - '08 full model support (Requires ProLine Connector)Added enhanced GL Class '06 - '08 full model support (Requires ProLine Connector)Added enhanced GLK Class '08 full model support (Requires ProLine Connector)Added enhanced ML Class '98 - '08 full model support (Requires ProLine Connector)Added enhanced R Class '06 - '08 full model support (Requires ProLine Connector)Added enhanced S Class '98 - '08 full model support (Requires the ProLine Connector)Added enhanced SL Class '98 - '08 full model support (Requires ProLine Connector)Added enhanced SLK Class '97 - '08 full model support (Requires ProLine Connector)?Enhanced Porsche support:Added enhanced 993 (911) '95 - '97 ' full model support (Requires ProLine Connector)Added full live data and bi-directional support for 60+ controllers (Requires ProLine Connector)Adding system coverage for: ABS 5, Rollover Protection, Tiptronic2, Park Assist, and PTMRemoved the need for 16pin adaptor with new ProLine Hardware (all except 911 993 models)*** 7.4 UPDATE ***Greetings!AutoEnginuity would like to announce the release of the 7.4 version of it's popular ScanTool software. This version finalizes the European coverage efforts we've been working on for the last year. We sent engineering to dozens of European dealerships in the United States and the United Kingdom to ensure that our coverage was the most complete in the plete details for this release can be found on our site here: highlights include:09/04/2009 7.4 Release:Enhanced Audi / VW support:Added the module ID to the sensor name on the system listAdded ADC Channel support for KWP1281 modulesAdded SRI function for KWP2000 modulesAdded auto baud rate detecting support to speed up initial system communication?Enhanced BMW / MINI support:Added full MINI (R55/R56/R57) support Added full X6 xDrive 3.0i and BMW X6 xDrive 5.0i (E71) supportAdded 120d and 123d '05 - '08 (E8X) supportAdded 318i E46 DME N46 full system model support Added full EGS GM6 system supportAdded full ANT, AMP, AMPH. BO, TCU, and ULF system support Added full EDCSHL, EDCSHR, EDCSVL, EDCSVR system supportAdded full TMFA, TMBF, TMFAH, TMBFH system supportAdded full VDM and VTG system supportAdded more LSZ2 system trouble code descriptionsImproved 316i DME N40/N42 sensor support Improved 1 Series body controller support to include Electronic Power Steering and SD?Enhanced Chrysler-family support:Added VPW-based OCM System Test?Enhanced GM-family support:Added ABS Automated Bleed Routine (Requires ProLine Connector)Added bitmaps and states for enhanced powertrain '96 - '97Added text-based responses for VPW-based DPID sensors?Enhanced Honda-family support:Improved Mode 6 descriptions '96 - '09?Enhanced Jaguar support:Added SType 2.7L diesel '05 - '08 full model support?Enhanced Mercedes support:Added DME ME 97 full bi-directional control supportAdded EGS53 full system support Added C, CLK, E (missing 210), G, GL, GLK, ML, R, S, SL, and SLK Class full door and trunk system supportAdded Power Window Normalization support for Door Control Modules (DCMXXX) and on the LCP163 for 163 modelsAdded DME CDI2 and CDI5 (diesel) full system support (to include Reset Quantity Mean Value Adaptation Data and others) Added UVS230C (Vario Roof) Denormalization functions for windows and remote trunk lidAdded missing Multimedia systems such as Satellite Radio, Universal Telephone, Navigation, etc.Added missing ABC Move Towards Calibrated Level system test Added LCP163 full system support (to include Power Window Denormalization) Improved trouble code clearing for older systems?Enhanced Toyota-family support:Added full diesel CAN EFI support*** 8.0 UPDATE ***AUTOENGINUITY RELEASES SCANTOOL 8.0MESA, ARIZONA – November 15th, 2009– AutoEnginuity, LLC, a global engineering company specializing in vehicle diagnostic solutions, today announced the worldwide release of ScanTool? 8.0 for the Windows? platform. ScanTool ? is a vehicle diagnostics system for the professional vehicle service industry.AutoEnginuity would like to announce the release of the 8.0 version of its popular ScanTool software. This version includes the model year 2009 support for all enhanced expansions.A key feature is support for all Asian enhanced expansion to operate with the ProLine hardware. Using the ProLine hardware for these Asian expansions will allow for more coverage (i.e., Toyota TPWS and Air Conditioning unavailable with the OBDII hardware); more electrical interfaces (OBDI Nissan DDL1 for late model AT controllers); no pigtail requirements (i.e., Hyundai/Kia); and, finally, faster connections by no longer requiring an OBDII connection for even enhanced controllers (i.e., Nissan late models will connect ten seconds faster.).Other key features, Windows 7 support, and for our customers who choose to develop their own software, we now are offering a programming interface for the ProLine hardware. Finally, this update will also include the new SpeedTracer 5.0. This new version includes support for the ProLine hardware, more Vehicle Profiles, and improved MPG support.Release highlights are:Enhanced Audi / VW support:Added 2009 coverage?Enhanced BMW / MINI support:Added 2009 coverage (excluding F01 7 Series)Added Transmission SMG IV full system supportAdded HUD full system supportImproved DME ME9 MS60 bi-directional and added reset adaptations?Enhanced Chrysler-family support:Added 2009 coverageAdded 1k new DTC descriptions?Enhanced GM-family support:Added 2009 coverage (excludes transmission controllers at this time)Added bitmaps and states for enhanced powertrain '96 - '97Added text-based responses for VPW-based DPID sensors?Enhanced Honda-family support:Added 2009 coverage?Enhanced Hyundai / Kia support:Added 2009 coverageAdded ProLine hardware supportAdded EPS ES95820 Rev02 CAN sensor supportAdded TPMS ES95800 Rev01-Rev04 full system supportAdded ABS ES95660 Rev38 full system supportAdded AT GS14 full system supportAdded PODS Reset for SRS ES95920 Rev24 and ES95210 Rev88 systems?Enhanced Isuzu support:Added 2009 coverage?Enhanced Jaguar support:Added 2009 coverage?Enhanced Mercedes support:Added 2009 coverage?Enhanced Mitsubishi support:Added 2009 coverageAdded full Shift Lever CAN system supportAdded Steering Angle Initialization and Operation Test function support for ACD CAN systemsAdded Service Reminder PID support for '04+ models that use Meter 8408Added 09MY TPMS CAN supportImproved ACD CAN system support by completing the PID list?Enhanced Nissan / Infiniti support:Added 2009 coverageAdded ProLine hardware supportAdded DDL1 support for late model Sentra and Versa AT controllersAdded full EPS, PSB, ACC, and USM CAN systems support?Enhanced Porsche support:Added 2009 coverage?Enhanced Subaru support:Added 2009 coverage?Enhanced Toyota-family support:Added 2009 coverageAdded ProLine hardware supportAdded TPMS, Air Suspension, and Air Conditioning systems support for the ProLine hardware?*** 9.0 UPDATE ***Greetings!AutoEnginuity would like to announce the release of the 9.0 version of its popular ScanTool software. This version adds 10MY support for all enhanced expansions. This release also features two other firsts in the after market tool industry: 1) graphing Ford Power Balance; and, 2) GM Global A vehicle support. Complete details for this release can be found on our site here: highlights include:11/17/2010 9.0 Release:Enhanced Audi / VW support:Added the handling of multiple busy responses when attempting to retrieve DTCs on CAN TP2.0 modules (Requires firmware 29)Enhanced BMW / MINI support:Added all missing JBE (Junction Box Module) sensorsAdded all missing FRM (Footwell Module) sensorsAdded all missing CVM and CTM (Convertible Top Module) sensorsAdded complete MJoystick (MJOY) system supportAdded complete Active Backrest Width (ALBFA and ALBBF) system supportEnhanced Chrysler-family support:Added the Diesel Stationary DeSoot system testAdded the Power Top Module system to the '07-'08 Chrysler Sebring ConvertibleAdded the Slow Speed sensors to the Enhanced Powertrain ModuleEnhanced Ford-family support:Added Power Balance graphing support for CAN-based (04 - 10MY) gas and diesel vehicles (Requires firmware 29)Enhanced GM-family support:Added Global-A Vehicle CoverageAdded the Saturn L100 model supportAdded the Chevrolet Cruze model supportAdded Transmission selection for the '96 & '99 Hummer H1 vehicleEnhanced Hyundai/Kia support:Added missing BCM and TPMS for Sedona 07MY+ (VQ)Enhanced Mercedes support:Added full CDI6 Bin5 diesel engine supportAdded missing CDI5 diesel engine trouble descriptionsEnhanced Toyota-family support:Added all remaining CAN Gateway systems (Left Seat AC CAN and Right Seat AC CAN)Download Today: *** 10.0 UPDATE ***AutoEnginuity would like to announce the release of the 10.0 version of its popular ScanTool software. ScanTool 10 introduces the 11MY enhanced support, more hybrid support (Chevy Volt, For Fusion/Milan/Zephyer HEV, Kia Optima HEV, Hyundai Sonata HEV, Mazda Tribute HEV, Prius 10MY+), J2534 hardware support, improved actuation model, actuation support for late-model Jaguar, Land Rover, and Ford of Europe, a new security model, an improved user-interface, Mercedes and Honda trouble code retrieval from all systems, improved European support adding Ford of Europe model additions, Toyota of Europe models, and Hyundai/Kia euro-specific models and diesel engines, and Audi/VW trouble code library now supporting over 15,000 UDS trouble code descriptions.ScanTool Version 10.0GeneralAdded battery voltage display to the bottom of the status barAdded J2534 hardware supportAdded Mode A trouble code supportImproved the main button selection to include Connect, Disconnect, and Change SystemAudi / VWAdded 11MY supportAdded over 15,000 more DTC descriptions for all of the UDS-based controllersAdded over 3,000 SAE DTC descriptionsImproved communication timingBMW / MINIAdded 11MY support (Limited F chassis support, full coverage coming shortly)Added '08 - '10 DDE 7.0 full system support for 135d, 335d, 535d, and X5 diesel.Added '08 - '10 120d and 123d model supportAdded '06 - '10 320d model supportAdded '04 - '10 530d model supportAdded over 1,000 more DTC descriptions for dozen of controllers (including SMGs)Added Steering Column Module (SZL) E60 and E63 Steering Angle Calibration supportAdded Transmission Oil Deterioration Collective resetting for TransmissionEGS6HP and TransmissionEGS6HPTUAdded Transmission 6HP / 6HPTU / GM6 (EGS) Reset Oil Life Counter supportAdded Longitudinal Sensor Calibration, Steering Sensor calibration, and Pump Motor support for DSC 60PP and DSC Premium controllersImproved compatibility between BMW DS3 controllers and OBD-II functionalityFixed 645i '04 - '07 Satellite B Pillar not reading or clearing trouble codesChrysler-familyAdded 11MY supportAdded the Transmission Quick Learn on PCM controller transmissions - PCM Variant 8Added Fuel Pressure Override Test for the '04 - '05 CumminsAdded 1000 more DTC descriptionsAdded CAN system test which performs a network test on possible installed modules and if found returns the installed modules variant versionAdded a 3.8 Liter Engine entry for the Chrysler Town and Country '09Added CAN-based System Configuration:Auto Door LocksBeltminderCurrent VIN ProgrammingDRL Setup ConfigurationModule Configuration SetupAdded CAN-based System Tests:CAM and Crank RelearnEATX Quick LearnEngine On OdometerInitialize ORCLearn ETCNew Engine InstalledRetrieve Installed Module VINsTire Size Programming (manually enter tire information)!!! See website for more information !!!Improved actuations stability while viewing live sensorsImproved 'Learn ETC' system test by adding instructionsFixed the max range value for vehicle speed for the Dodge Durango '00 engineFixed issue when pulling DTCs on Non-Engine / Non-Transmission modules as SAE based codes for CAN modulesFixed the voltage ranges for the Chrysler Cross-Fire '04 sensors to read as 5vChanged the sensor name of the HPCR Fuel Pressure Output to HPCR Fuel Pressure Duty Cycle OutputMoved the Contribution Cylinder Test under OnBoard Tests for the '04 - '05 CumminsFordAdded 11MY supportAdded support for Powerstroke 6.4L Power Balance to disable injectors while operatingAdded Tire Size Programming for Powerstroke 6.4L modelsAdded '10+ full system support for:FuelFireHeaterCANCruiseControlModuleCANHeadsUpDisplayCANInteriorLightingControlModuleCANRemoteFunctionActuatorCANSteeringEffortControlModuleCANAdded actuation support Enhanced Powertrain CAN for Ford of Europe modelsAdded Fire Suppression System Module full system supportAdded new VGT sensors for latest Powerstroke 6.0L calibrationAdded Passenger System Reset supportImproved Ford of Europe Transit and Transit Connect supportImproved Injector Correction Factor support by eliminating the need to input the displacementFixed issue with some CKP tests reporting the test failed, because it couldn't find the engine speed sensorFixed Taurus 10MY+ IPC sensor list missing some PIDsFixed Ford of Europe Galaxy / Mondeo / SMax 07MY+ ABS controllers not reporting trouble codes if more than ten exist GM-familyAdded 11MY supportAdded 5000 DTC descriptions for Global-A vehiclesAdded descriptions for DTC Symptom codes for GMLAN based modulesAdded Idle Relearn actuation to the engine systems '01 - '11Added Chassis and Body support for the Pontiac Montana '08Added SDM Setup and Part Number Programming for the following modules (See website for vehicle coverage):Common ArcEpsilonAdded the actuations for the IPC for Chevrolet Light Truck '05 C & KAdded missing Cylinder #5 for the injector kill actuation on the '04 - '05 DieselsAdded missing cylinders for the 5.7L '97 Cylinder Injector Balance TestAdded missing engines for the Chevy Aveo 1.4 Liter LDT and 1.6 Liter LXV '09 - '10Added missing engines for the Pontiac Vibe 1.8 Liter LAY and 2.4 Liter LAX '09 - '10Added more instructions when running the vehicles CKP Relearn testImproved actuations stability while viewing live sensorsImproved Mode 6 scaling and units descriptionsImproved all flow rate-based sensors to a precision of 3 decimal placesAdded VIN model decoding for Light Truck '00 - '11Except for GMC and Chevrolet Light Trucks '00 - '09Fixed the Fuel Gauge actuation sweep for the Chevy Uplander '05Fixed the invalid Transmission TFP switch State for the Chevy Malibu '06Fixed the TCC Solenoid actuation for the Chevy Silverado 6.6L '07Fixed the seat belt buckle PIDs reporting incorrectly on a Chevy Cobalt '09Fixed Vehicle Theft Deterrent system selection for the Chevy Malibu '01Honda/AcuraAdded 11MY supportAdded support to retrieve diagnostics trouble codes from All systemsAdded the VTC System TestAdded the following system test for KWP2000-based systems:Air Conditioning ModuleSelf DiagnosticsCentral Panel ModuleSelf DiagnosticsDriver Door ECU System TestsReset of Driver Side Window PositionReset of Assistant Side Window PositionReset of Left Rear Side Window PositionReset of Right Rear Side Window PositionHands Free Telephone ModulePasscode ClearImmobilizer ModuleKeyless Entry RegistrationDiagnosis of Keyless Entry functionMETER Module:Self DiagnosticsEngine Oil ReplacementATF ReplacementMission ReplacementPower Window Module System TestsDiagnosis of Keyless Entry functionReset of Driver Side Window PositionReset of Assistant Side Window PositionReset of Left Rear Side Window PositionReset of Right Rear Side Window PositionSmart Entry ECUSelf DiagnosticsDiagnosis of Keyless Entry functionImproved Mode 6 scaling and units descriptionsHyundai / KiaAdded 11MY supportAdded Optima HEV and Sonata HEV '11 model supportAdded Soul 10MY+ diesel engine supportAdded Cee'd '09 - '11 petrol and diesel model supportAdded Carens '02 - '11 petrol and diesel model supportAdded Venga '09 - '11 petrol and diesel model supportAdded missing Genesis '10 Adaptive Front Lighting System supportAdded SMART Key full system supportAdded missing TPMS CAN sensor IDsFixed ESC CAN G Lateral Sensor issue only show negative valuesJaguarAdded 11MY supportFixed ICMII CAN Odometer sensor reporting wrong valuesLand RoverAdded 11MY supportAdded Service Interval Reset (SII) for 05.5+ modelsAdded Steering Wheel Angle Calibration for 05.5+ modelsAdded Enhanced Powertrain CAN full actuation support for 05.5+ modelsAdded Enhanced Powertrain CAN Reset Adaptation support for 05.5+ modelsAdded Ride Level Control Module CAN full actuation support for 05.5+ modelsAdded new B Code trouble code descriptionsMazdaAdded 11MY supportAdded Mazda of Europe / Japan model support (01MY+)Added Blind Spot Module (Left and Right) CAN 14229 full actuation supportAdded Instrument Cluster CAN 14229 full actuation supportAdded Transmission Control CAN 14229 full actuation supportAdded ABS CAN 14229 full actuation support and Yaw Raw, Brake Pressure, and Lateral Sensor Initialization (10MY+)Added RCM CAN 14229 Passenger Seat Rezero (Will not code new controllers) (10MY+)Added KAM Reset for the CAN 14229-based ECMsMercedesAdded 11MY supportAdded support to retrieve and clear diagnostic trouble codes from All systemsAdded complete B Class model supportAdded Wheel ID Registration for GL Class (164) and S Class (221)Added SBC 1 Deactivation and ActivationAdded CLS Class (216) and S Class (221) Electronic Seat Control full system supportAdded CLS Class (216) and S Class (221) Dynamic Seat Control full system supportAdded missing Electronic Height Control (EHNR211) support RClass 164 modelsAdded DME, EGS, SRS, and ASR support for E Class pre-DAS3 (<98MY)Fixed missing ESP MK25 support for '03 W163 modelsFixed early EGS controllers not connecting because vehicle responds with multiple delaysMitsubishiAdded 11MY supportFixed '10 and '11 Mode 6 data not being translatedNissan / InfinitiAdded 11MY support (LEAF support coming soon)Added GTR Enhanced Powertrain full system supportAdded Side Radar Left, Side Radar Right, and ODS full system supportAdded Steering Angle and G Sensor Calibration support for CAN ABS controllersAdded missing IPDM sensorsFixed ADP CAN actuations working with ProLine hardwarePorscheAdded 11MY support (Panomara and Cayenne coming soon)Added PSM CAN actuationsAdded GT2 and GT3 10MY DME full supportAdded Porsche 996 Cup Car MS31 DME full system support (Requires Cup Car cable sold separately)Added Porsche 997 Cup Car MS31 DME trouble code support only (Requires Cup Car cable sold separately)Fixed connectivity issues with Porsche Cayenne '03 - '04 body controllersToyotaAdded 11MY supportAdded Toyota of Europe model support (01MY+)Added missing RX450h and Prius 10MY Hybrid Controller, Transmission, and Power Source Control full system support (Vehicle requires latest calibration from Toyota)Added TPWS CAN Tire Registration support (Requires firmware 32)Added VIN programming supportAdded new 10MY Back Door Motor CAN PID setImproved TPWS Tire Registration instructionsFixed Main Body CAN actuations not working for some late modelsFixed Mode 6 not scaled and translated for pre-08MY vehicles that are CAN-based Release Letter: also have ALL Generic OBD2 scanning and code resetting ability for even the most basic software package for all Domestic and Foreign passenger cars and trucks.See more on the AutoEnginuity Professional line of products: *** 11.2 IMMEDIATE RELEASE ***AUTOENGINUITY RELEASES SCANTOOL 11.2MESA, ARIZONA – August 23rd, 2013– AutoEnginuity, LLC, a global engineering company specializing in vehicle data stream and diagnostic solutions, today announced the worldwide release of ScanTool? 11.2 for the Windows? platform. ScanTool ? is an award-winning vehicle diagnostics system for the professional vehicle service industry.The ScanTool 11.2 release adds new features and improves coverage for US, Asian, and European enhanced. Key features for this release are: Added late-model BMW diesel system functions: Quantity Mean Value Adaptation, EGR Valve Calibration, MAF Calibration, Rail Pressure Valve Adaptation, and Particulate Filter Regeneration to name a fewImproved GM light trucks ’00 – ’05 bitmapped sensors coverageAdded Jaguar XF 10+ diesel system functions: Oil Service Reset, Force Particulate Filter Regeneration, and Particulate Filter ReplacementAdded late-model Nissan diesel support for European modelsImproved Toyota sensor and actuation coverage matrixes by using the updated method of reading coverage from the vehicle’s memoryFor further details about ScanTool, visit or email sales@.About AutoEnginuityAutoEnginuity, LLC, is a global leader in vehicle diagnostic solutions. Since 2002, AutoEnginuity has been delivering superior vehicle specific coverage while maintaining reasonable prices. AutoEnginuity develops world-class vehicle diagnostic solutions for individual, business, and industrial applications. Press ContactJay HorakAutoEnginuity, LLC+1 480-827-8665 (TOOL)jayhorak@AutoEnginuity, the AutoEnginuity logo, ScanTool, the ScanTool logo are registered trademarks of AutoEnginuity, LLC. All rights reserved. All other trademarks are the property of their respective owners.*** 14.0 UPDATE ***AutoEnginuity would like to announce the release of our Giotto? (version 14.0) scan tool software.We named our new scan tool Giotto? after the famed Italian architect who showed the world that Simplicity is Perfection?. With Giotto?, our goal was to advance our user experience to the next level by making it a first-of-its-kind touch-based interface, while making it smarter and more plete details for this release can be found here: Giotto (14.0) Release:Added model year 2015 supportAdded new firmware (44) to support CAN and VPW broadcast mode for the fastest update rates (supporting makes GM, Ford, or Nissan) (Requires VCI+ / VCI+ WIFI)Added Ferrari 458 / 612 / California and Maserati (M139) and (M145) complete system coverage (Requires firmware 44) : Body Computer, Climate Control, Driver and Passenger Door Systems, Hella Headlamps Leveling, Parking Brake System, Parking System, Steering Assistance, TPMS BeruAdded complete Instrument Cluster and Parking Brake System coverage for Maserati (M139) and (M145), Ferrari 599 / 612 / 458 / California modelsImproved Ford Power Balance by speeding up data rates to rival the factory tool and removed the setup delayImproved Windows 10 compatibility and high-DPI device supportImproved early GM model support by adding TP and APP sensor that required broadcast modes to operateApple iOS Coming Soon (Q1 2016)! For those that are upgrading from ANY previous version, you will be required to get new activation codes and update your ProLine hardware firmware. Please install the new software, start the ScanTool, and go to Help | Feature Activation for the proper activation procedure. The AC10 may be necessary if your account subscription is older then 12 months. Order AC10 Update Here. Finally, activation codes are only made by the activation server (Support does not make codes) during business hours. Sincerely, Jay Horak AutoEnginuityemail: sales@ phone: 480-827-TOOL (8665) web: ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download