KUSHAGRA SINGH - Autodesk



PURTI AGARWAL MATHUR

|Email: purtiagarwal1987@, purti_agar@yahoo.co.in |

|Contact No. 09289630534, 9650965683 |

OBJECTIVE

To pursue a successful career in the field of Mechanical Engineering by continuously learning new technologies, and implementing my knowledge to enable the organization to achieve its target. I am finding opportunity in Power Plant Generation field. I am studying Executive MBA specialized in Power Management; have completed 2 semester, total 6 semester course doing by UPES Dehradun.

POSITION HIGHLIGHT : MEHANICAL Sr. AUTOCAD DESIGNER / EPC (POWER PLANTS)

CAREER SUMMARY : Total 8+ yrs exp. (6 yrs Exp. in EPC Mechanical Designer)

PROFESSIONAL EXPERIANCE

Project Designing in Power Plants

• Plot plan (General Arrangement of Plant),

• Process Flow Diagram, Process and Instrumentation diagram of

➢ Plant water & Service water system

➢ Auxiliary Cooling water system

➢ Closed cycle cooling water system

➢ Water treatment plant system,

➢ Demineralization water system

➢ Compressed Air system(Instrument & Service air system)

➢ Flue Gas system

➢ Ash Handling system

➢ Coal Handling system

➢ LDO system PFD

• Analysis of PFD’s.

• Review of Plot plan & PFD’s with under Engineer guidance,

• Work in Tendering

• Maintain RFQ’s

• Prepare Tender document

• Coordinate with vender for Tendering Document, certificates.

• Preparation of Drawing with AutoCAD (2D),

• Equipment Modeling AutoCAD (3D),

• AutoCAD MEP (2D & 3D) Modeling,

• Preparation of Drawing PFD & P&ID with CADISON (2D)

• CADISON MATPIPE (for maintain equipment specification)

• CADISON-DESIGNER (2D & 3D) for Plant Design

• Making Video of 3D Models with NAVISWORKS

Execution & Designing of SWAS Panel

• Execution of SWAS (Steam & Water Analysis System) Projects

• Prepare (datasheets of components & Analysers) as Per equipment specification

• Design of SWAS Panel(Wet & Dry)

• Checking of Panel - Hydraulic testing & air leakage testing of wet panel system

• Design of panel electric wiring as per Sr. Engineer suggestion

• Customer Inspection of panel (Hydraulic test & air leakage test of panel).

Machine Designing

• Designing of Flour mill & rice mill projects

• Flour and Rice Mill Machine Design (In Reverse Engineering) and Development and Implementation of Machined Design components

• Bill of Material for M/C parts. Machine Design in Reverse Engineering method. Work on Pro-e & AutoCAD.

ORGANISATIONAL SCAN

➢ December, 2008 to -2015 march Isolux Corsan Construction Engineering & Pvt. Ltd. Gurgoan as Sr. Designer (Mechanical)

Isolux Corsan is a leading company in the fields of engineering, construction and the concession of large infrastructures throughout the world. Isolux Corsan has accumulated ample experience in building and commissioning power plants to generate electricity using a range of technologies: open-cycle, combined-cycle, coal-fired, photovoltaic.

Project:

• 2x35 MW Gas based simple cycle power plant Futila, Cabinda, Angola (Africa)

Client: - Emprese Nacional De Electrocidade (ENE), Angola

Job Responsibility:

Modify plot plan, PFD, P&ID as per the customer comments. Presently

• 480m3/day Bio-Ethonal & Energy Production 40MW Plant at Elcravan, Bogota, Columbia

Client: - Bio Energy S.A. Bogota Columbia.

Job Responsibility:

Bio Energy (Process) – Prepare Process equipment list, editing of Boiler foundation list, checking line list with P&ID, prepare P&ID for Auxiliary coolant water system, Dist. Air instrument & service system, condensed system, steam boiler system, generate Standard model in CADISON software for PFD & P&ID.

Bio Energy (Power) – P&ID drawing for service & air instrument distribution system, condensed system.

Proposal Support Engg.

• 2X150 MW Siddhirganj Peaking Power Plant on Turn Key Basis

Client: Electricity Generation Company of Bangladesh (EGCB)

• 1 x 150 MW Khulna Peaking Power Plant on Turn Key Basis

Client: North-West Power Generation Company Limited, Bangladesh

• 2 x 250 MW Surat Lignite Power Project, Phase –II, Surat, Gujarat, India

Client: Gujarat Industrial Power Company Ltd (GIPCL), India

• 380-425 MW Pioneer Combined Cycle Power Project, Bhagad, Raigad, Maharashtra, India

Client: Pioneer Gas Power Limited (PGPL), India

• 1400MW and 700 MW Modified Gas Fired Combined Cycle Power Plant, AT BIDADI Bangalore, Karnataka, India

Client: Karnataka Power Corporation Limited, Karnataka, India

• 1200MW Combined Cycle Power Plant, Uran, Maharashtra, India

Client: Maharashtra Power Generation Corporation Limited, Maharashtra India

• 2x600MW SCCL Thermal Power Project,

Client: Singareni Collieries company Ltd. India

• 1X160 MW (Existing Unit) Combined Cycle Power Plant STAGE-IV, Ramgarh, Distt. Jaisalmer, Rajasthan

Client: Rajasthan Rajya Vidyut Utpadan Nigam Ltd.

• 2X660 STPP_ Sahara Project

Client: Sahara India Power Corporation Limited

• 1X660 MW Ennore Tamil Nadu

Client: The Singareni Colleries Company Limited

• 1X350 MW Coal Based Super Critical Power Plant In Nellore Andhra Pradesh

Client: VSF Energy Project Pvt. Limited

• 2X260 MW GAS Turbine Power Plant, Kuwait

Client: Ministry of Electricity and Water, State of Kwait

• 2X300 MW Ghanmukh Village, (JPGL) at Maharashtra.

Client: Jinbhuvish Power Generation Pvt. Limited

• 2X660 MW Udangudi Spercritical Thermal Power Project

Client: Tamil Nadu Generation and Distribution Corporation Limited.

• 3X170MW (ISO)Open cycle Gas Turbine Project, Turkmenistan

Client: Turkmenistan

• 51 MW Combined Cycle Captive Power Plant of ONGC in Hazira

Client: Oil and Natural Gas Corporation Limited.

• 450 MW Ashuganj Combined Cycle Power Plant, Bangladesh

Client: Ashuganj Power Station Company LImited

• 500 MW Open Cycle Power Palnt Az Zour, Kuwait

Client: Ministry of Electricity and Water

• 600 MW Coal Fired Power Project Mongle, Khulna, Bangladesh

Client: Orion Group, Bangladesh

• 700 MW Combined Cycle Power Plant at Nedunoor, Karimnagar Dist.

Client: Andhra Pradesh Power Dovelopment Company Limited

➢ September 2008 to December 2008 Imperial Auto India, Faridabad, as Sr. Design Engineer

Automotive Parts manufacturing & OEM supplier

Project:

• Tool Design for Piaggio, Suzuki

Job Responsibility:

Work on AutoCAD, Pro-e. tool designing jig & fixtures of of Auto parts, fuel pipe, gaskets. maintain documentation in ERP system.

Design Jig & fixtures for tool automobile tubing for fuel injectors.

➢ November 2007 to September 2008 ABB Limited, Faridabad, as Project Engineer (SWAS Panel)

Project:

• 5x200MW, NTPC, SSTPS Shakti Nagar (NTPC Singrauli).

• Tata Projects Limited (1x80MW Capative Power plant Zawar).

• Bharat Heavy Electrical Limited, Trichy (Chunnar)

Job Responsibility:

Design SWAS panel, revised panel drawing & datasheets of components as per customer comments, Hook up design for field instrumentation projects in power plant projects.

Worked as a Project Engineer (SWAS) in Field Instrumentation Department.

Handling of N.T.P.C. and P.D.I.L. and T.P.L. customer inspection of SWAS Panel (Work on AutoCAD).

➢ July 2006 to November 2007 Flourtech Engineer Pvt Ltd, Faridabad, as Design Engineer

Project: Lakshmi chakki plant (Punjab)

Great value food (Noida)

Machine Design: Destoner M/C, Purifier M/C

Job Responsibility:

Detailing of machines, components, brought out part, designing and drawing of machine components and creating assemblies of machine parts.

Worked as a Design Engineer in Design Department.

PROFESSIONAL QUALIFICATION

• Executive MBA in POWER MANAGEMENT(Energy) (3yrs course)

From Centre for Continuing Education, UNIVERSITY OF PETROLEUM & ENERGY STUDIES (UPES) (Complete IInd Semester) is perusing, started in Jan 2013, complete in Dec 2015.

• Bachelor in Arts (Private) with Political Science & History in 2012 with 52%.

• Diploma Engineering (Mechanical Engineering)

Government Polytechnic, Bijnor. (Affiliated with the Board of Technical Education, Uttar Pradesh)] in 2005 with 73 % marks.

INDUSTRIAL TRAINING

Government Sugar Plant, BIJNOR

Duration : 15 days summer training as a Trainee Engineer.

30 days summer training as a Trainee Engineer

Project Undertaken

Lathe Machine

Design & Estimation to overhauling of centre Lathe Machine.

Computer Literacy

AutoCAD 2D & 3D, Pro-e. AutoCAD MEP, CADISON (2D & 3D) CADISON-MATPIPE, 3D-Models with Naviswork, MS Word, MS Excel, MS Power Point,

Personal Profile:-

Father’s Name : Shri Dinesh Kumar Agarwal

Husband Name : Anuj Mathur

Marital Status : Married

Date of Birth : 16th May, 1986

Permanent Address : A Bhadur Singh Complex, Near Primary school, Sukhrali 17C, Gurgaon

Nationality : Indian

Language Known : Hindi & English

Hobbies : Dancing and Yoga

PRESENT CTC:

EXPECTED CTC:

Date: …………

Place: ………...

(Purti Agarwal)

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download