WSU Research | Washington State University



91440022098000Unmanned Aircraft Systems (UAS)Standard Operating ProceduresVersion 2.06 January 2015Youtube video link - of ContentsSectionsSection 1: General/Background/Responsibilities ………….……………………………3Section 2: Training Requirements/Certifications ………….……………………………4Section 3: Unmanned Aircraft Systems (UAS) Requirements/Certifications…….……..6Section 4: Certificate of Authorization (COA) Process ………….……………………...7Section 5: Communications Systems Requirements …………………………………….9Section 6: Pre-Mission/Flight Planning …………………………………………………. 10Section 7: UAS Operations/Safety Procedures ………………………………………….. 12Section 8: UAS Emergency Procedures …………………………………………………. 15Section 9: Downed UAS Recovery Procedures/Environmental Impacts ………………... 17Section 10: Privacy Rules/Considerations ……………………………………………….. 18Section 11: Public Awareness ……………………………………………………………. 20Section 12: Federal Aviation Administration Reporting Requirements ………………….. 21Section 13: WSU Reporting Requirements ………………………………………………. 22AppendicesA. COA Checklist ………………………………………………………………………..A-1B. List of WSU Certified Pilots/Assigned UAS Group ………………………………….B-1C. Acronyms and Abbreviations …………………………………………………………C-1D. FAA References/Rules and Regulations ………………………………………………D-1E. Points of Contact List ………………………………………………………………….E-1Section 1: General/Background/ResponsibilitiesThis Standard Operating Procedures (SOP) document has been developed to guide and support ongoing WSU research activities that include the use of unmanned aircraft systems (UAS). The SOP is designed to be a ‘living’ document, with updates made on a regular basis (as driven by changes to FAA regulations, feedback from users, and lessons learned in the field). It will serve as the common core document, from which SOP addendums for specific UAS operations will be developed.This SOP represents WSU’s standing rules and procedures for all UAS users supporting WSU funded activities. Although it has many purposes, its primary is safety of flight and risk mitigation. It is important to keep in mind that each UAS and each UAS operating area will have its own challenges. As such, AT NO TIME does this SOP override WSU UAS user responsibility to ensure safety of flight. When ongoing operational use appears to require a deviation from this SOP, or any authorized addendum thereto, the user is to cease all operations and immediately contact the WSU UAS Operations Advisor for further guidance. This document has been issued, and will be maintained, by the WSU UAS Operations Advisor. It is the responsibility of all WSU staff involved with UAS operations to be fully familiar with this document prior to beginning the UAS approval process.This SOP was developed as a summation of operating procedures pertinent to WSU UAS operations. It remains the responsibility of WSU UAS users to be fully aware of current FAA directives, notices and regulations, especially those listed in Appendix D. At no time does this SOP (or an addendum to this SOP) overrule FAA directives, notices and regulations; when a conflict between this SOP and FAA documentation is found, report such conflicts immediately to WSU UAS Operations Advisor for review.Section 2: Training Requirements/Certifications (People Stuff)In order to be a UAS Pilot in Command (PIC) of a Group 1 or Group 2 UAS, current FAA requirements call for both the successful completion of the Private Pilot written examination and a current Second Class Medical Certificate for UAS flights that are:Below 400 feet;No closer than 5 NM from any FAA-designated airport or heliport;Outside of congested areas;Occurring in sparsely populated Class G airspace; and are,Line of sight (LOS) operations no further than ? NM laterally from the PIC. Other types of UAS operations require the PIC to have a minimum of a Private Pilot certificate and are not currently authorized by WSU under this SOP.In addition to the above, WSU UAS PIC’s must have the following training completed prior to beginning the COA process:Normal, abnormal, and emergency procedures in the UAS being operated;Manufacturer-specific training (if available);Demonstrated flight proficiency; Certification/testing of PIC proficiency in the UAS being used for research; and,Completion of the WSU UAS Operations Course.Documentation of pilot training/certification requirements must be provided to the WSU UAS Flight Operations Advisor prior to UAS users commencing the COA application process. Required flight time can be done as part of a hobby club or through personal UAS use; consideration for reduced flight time requirements in light of qualifying simulator activity will be taken for consideration. All WSU Visual Observers (VOs) must pass either the Sport Pilot or Private Pilot written examination, as well as hold a current Second Class Medical Certificate. Additionally, VOs and Principal Investigators (PIs) must complete the WSU UAS Operations Course prior to being assigned/certified by WSU as a VO or PI. This will include UAS operations specific training in communications, scanning, and reporting procedures, along with training on specific rules and responsibilities outlined in 14 CFR 91.111 (Operating Near Other Aircraft), and 14 CFR 91.113 (Right-of-Way Rules). The aforementioned must be completed prior to beginning the COA application process.All WSU UAS PICs must show currency in their pilot certificates and log books, including all required bi-annual certification and any associated medical certification (if required by the FAA), prior to fulfilling the role of a WSU UAS PIC. UAS PICs without a Private Pilot certificate must retake/pass the Private Pilot written examination every 24 months. In addition, all WSU UAS PICs, VOs and PIs using UAS for their research must retake the WSU UAS Operations Course every 24 months.The Each local WSU UnitOffice of ___________ is responsible for maintaining records of all WSU UAS PICs, VOs and PIs, including copies of all training certificates, logbook, and other endorsements.Note: WSU UAS training/certification requirements will be updated as changes occur to FAA regulations, with the best interest of safe operations and risk mitigation in mind. Contact the WSU UAS Flight Operations Advisor for the latest qualifications checklist prior to beginning the COA process. Section 3: UAS Requirements/Certifications (Aircraft Stuff)According to FAA Directive N8900.227, “All UAS must be in an airworthy condition to conduct flight operations in the [National Airspace System] NAS.” The FAA considers a UAS in airworthy condition for COA purposes when:The UAS has been issued the appropriate FAA type certificate, and/orThe UAS meets the applicable standards and requirements of the operating agency (WSU) and is capable of operating in compliance with the applicable requirements in FAA Federal Aviation Regulation (FAR) Part 91. There is no set airworthiness path in place specifically for UAS; the FAA will work with WSU UAS users in the process, since requirements for UAS will differ from manned aircraft. Further, the size of the UAS (Group level) has a direct impact on the level of certification required for flight.For complex UAS systems (which must be repaired by a maintenance technician), standards must be in place and will be reviewed by the FAA as part of the COA process. For UAS with simple repairs required (e.g., Group 1 quadrotor blade change-out, etc.), the process can be simply documented within the SOP Addendum for the specific UAS.WSU Office of _________________ is responsible for reviewing all airworthiness related documentation prior to COA submission.Section 4: Certificates of Authorization (COA) ProcessCOAs and waivers are issued by the Air Traffic Organization (ATO) to public operators for specific UAS activities. The FAA initiates a comprehensive review of all COA applications, including, but not limited to, both operational and technical issues. The FAA currently targets 60 days as a turnaround time for COA review/validation, at which point the COA may be approved as submitted, approved with provisions or limitations, denied, or, a waiver of COA requirements issued. No WSU UAS operations are allowed until the FAA has issued an approved COA (or waiver) to the University – there are no exceptions to this rule. WSU COA ProcessWSU UAS user/applicant briefs the WSU UAS Operations Advisor on his/her UAS operational needs.The WSU UAS Operations Advisor briefs the WSU’s Director for the Office of Grant and Research Development (OGRD) _______________ for permission for the applicant to proceed with required application paperwork. WSU UAS user/applicant completes all required training/certifications.WSU UAS user is provided a COA account logon by the OGRD Director___________; user then completes the online draft COA registration form.WSU UAS applicant forwards the completed draft COA and SOP addendums to the WSU UAS Operations Advisor for review.Once the WSU UAS Operations Advisor determines the COA and SOP addendums are complete, meeting both FAA and WSU requirements, the final draft COA is forwarded to the OGRD Director________________ for final approval and release to the FAA.Once received, the FAA will complete an administrative/feasibility check of the COA.If the COA passes the administrative/feasibility check, the formal COA review/validation process begins, with approval, disapproval, and/or feedback from the FAA approximately 60 days from the start of this step.Once a COA has been approved, the WSU UAS user must review all COA feedback from the FAA, review the WSU UAS SOP (and any addendums) for changes that may have occurred during (or as a result of) the COA process, and prepare a briefing for both the WSU UAS Operations Advisor and the OGRD Director________________ as to their updated UAS operations plan. Once done, the OGRD Director_______________ will provide the final approval for operation of the UAS under WSU authority. The FAA has the authority to suspend, cancel or delay activities related to a COA, if terms of the COA have been broken or safety has been compromised in the air or on the ground. Per FAA Directive N8900.227, this includes, but is not limited to, the following:Incidents or accidents occurring during UAS operations in the National Airspace System (NAS); Habitual noncompliance with administrative requirements, such as failure to provide the FAA with monthly reports on the number of flights, pilot duty time, or unusual equipment malfunctions (e.g., a malfunction or failure of ground control station (GCS) flight control hardware or software (other than loss of control link); a power plant failure or malfunction; a deviation from any provision contained in the COA); Deviations from ATC instructions, operational, or coordination issues; and Events of intermittent or persistent lost-link as described in the COA or events determined to pose as a risk to the safety of the NAS. Under rare circumstances, the FAA may waive the requirement for a COA and grant a waiver for operations to occur. If this does happen, all requirements set forth in the original COA and during the WSU UAS approval process will still apply to the WSU UAS user.Section 5: Communications Systems RequirementsUnless otherwise approved, all WSU UAS operations will use currently approved UAS (uplink/downlink) frequencies. These frequencies allow for unlicensed operation in the 900 MHz, 2.4 GHz, and 5.8 GHz frequency bands. If user requirements call for operating in any band other than the aforementioned, the WSU UAS user must apply for either a Federal Communications Commission (FCC) Experimental Radio License or Special Temporary Authority (STA). Because operating frequencies of UAS links must be included in the COA, the WSU UAS user must have proof of FCC approval for operation outside of unlicensed UAS bands prior to beginning the COA process. A primary reason for requesting use outside the normal UAS frequency bands is possible electromagnetic interference (EMI) between UAS communications/control systems and other communications systems being used in the assigned UAS operating area. It is the WSU UAS user’s responsibility to survey the operational area, as needed, to confirm whether the frequencies selected are indeed usable in the operational environment, due to EMI, terrain, etc.WSU UAS PICs will use UNICOM as their primary mode of routine voice communications with ATC and aircraft in the area. The same radio transceiver used for UNICOM will also be used for emergency operations and communications with ATC. An active WSU FCC license will be required for operation. The VO, PI, sensor/payload operator, or any other person charged with providing see-and-avoid (SAA) assistance must have immediate inter-communications capabilities with each other and the PIC. This can be via separate very high frequency (VHF) communications or via cell phone. In addition, all WSU UAS VOs and PIs onsite must monitor the same air traffic control (ATC) frequencies being monitored by the UAS pilot (for WSU, normally UNICOM). Although only the PIC will communicate with ATC, monitoring of that frequency will provide additional situation awareness to all participants during the flight event. This will require each member of the UAS team to possess either a scanner or aviation band transceiver. Cell phones are not authorized as a primary method of communications between the PIC and ATC unless authorized under Special Provisions of the COA; actual UAS flight and mission required communications usage is governed by FAA § 91.21. Any electronic device that can reasonably be expected to interfere with UAS uplink/downlinks shall be turned off during flight operations. Section 6: Pre-Mission/Flight PlanningPreflight planning is key to safe flight operations. Before each flight, the WSU UAS PIC, VO and PI will work through the UAS flight plan, ensuring that the designated operating area is safe for all users within that airspace. The WSU UAS PIC, VO and PI will: Check all available aviation maps/charts, weather (via the Direct User Access Terminal Service [DUATS]) Check Notice to Airmen (NOTAM) postings, and confirm that NOTAMs related to WSU UAS operations have been properly disseminated and posted Check the Airport/Facilities Directory (AFD) and all other available information related to the planned flight/assigned operations area Notify airport managers and/or fixed-base operators (FBOs) adjacent to the active UAS operating area, in order to ensure maximum situation awareness of ongoing activities between WSU UAS operations and local airport authorities Confirm that WSU UAS related announcements to Automated Weather Observation System (AWOS)/Automatic Terminal Information Service (ATIS) devices are in effect and being properly broadcast. Perform all other necessary research in due diligence to ensure safety of flight and optimize risk mitigation. Crop dusting aircraft are active several months of each year in and around the areas anticipated for use by WSU UAS operators. As such, commercial agricultural aviation operators will be identified and notified in writing of all UAS test activities that could affect their operations.Prior to and during UAS operations in forestry areas, WSU UAS users will coordinate with the U.S. Forest Service to de-conflict UAS activity with the Forest Service rotary wing/fixed wing activity, including firefighting aircraft. A similar courtesy will be afforded to U.S. Department of Defense (DoD) assets, when COA operations have been approved for operation within a Military Operations Area (MOA).Throughout all UAS operations, the WSU UAS PIC, VO and PI will have the authority to stop a launch or terminate a flight. AT NO TIME will WSU UAS operations take place without all assigned personnel in place, as dictated by the approved FAA COA, this WSU UAS SOP, and any SOP addendum for the operation. In accordance with FAR § 91.3, the WSU UAS PIC will be directly responsible for, and is the final authority for the operation of his or her aircraft, as approved by the FAA COA and WSU.Section 7: UAS Operations/Safety ProceduresAll WSU UAS flights will be flown within visual line-of-sight (LOS) of the ground-based PIC (airborne PIC operation is not authorized by WSU at this time).The following operational/mission management restrictions apply to WSU UAS operations: The assigned PIC has primary authority over all flight operations conducted in support of research activities. The PIC assigned to the research project is the only person with authority to approve flight operations. A single PIC must be designated at all times.Handoff to another PIC is allowed, using proper handoff techniques. For example:PIC 1: “You have the aircraft.”PIC 2: “I have the aircraft.”PIC 1: “You have the aircraft.” Failure to follow a ‘closed loop’ approach is a recipe for loss of UAS control. The PIC of the UAS is directly responsible for, and is the final authority of, the operation of that UAS. A PIC may control only one UAS at a time. A PIC cannot serve as a PIC and a VO at the same time. With the exception of initial qualification training, pilots must be qualified on the UAS being flown (as previously addressed). The Principal Investigator (PI) is charged with oversight of flight operations supporting his/her research, including safety, risk mitigation, public awareness, and privacy related issues. At anytime, the PI has authority to halt or stop UAS flight in order to maintain safety of flight/mitigate risks.In accordance with FAA Directive N8900.227, a Visual Observer (VO) must be positioned to “assist the PIC, to exercise the see-and-avoid responsibilities required by §§ 91.111, 91.113, and 91.115 by scanning the area around the aircraft for potentially conflicting traffic and assisting the PIC with navigational awareness.” For WSU UAS operations, this role of VO shall not be performed by the PI (since the PI is focused on data collection). Daisy-chaining of VO’s (for extended LOS) is neither recommended by the FAA nor approved by this SOP.The VO shall:Assist the PIC in ensuring the UAS stays within set visual LOS boundaries. Perform the role of VO from a location that allows complete situation awareness of the UAS and other aircraft within the surrounding airspace. This includes assisting the PIC in effective control of the UAS, through:Determining the UA’s proximity to all aviation activities and other ground plying with FAA §§ 91.111, 91.113, and 91.115Preventing the UAS from creating a collision hazard, andInforming the PIC before losing visual contact with the UAS and/or collision hazards. Per FAA Directive N8900.227, Because of field of view and distortion issues with aids to vision such as binoculars, field glasses, night vision devices, or telephoto lenses, these are allowed only for augmentation of the observer’s visual capability; they cannot be used as the primary means of visual contact. When using other aids to vision, VOs must use caution to ensure the aircraft remains within normal visual line-of-sight of the observer. These aids to vision are not to be confused with corrective lenses or contact lenses, which do not alter the field of view or distort vision.In the end, ensuring LOS and safety of flight is the responsibility of the PIC: supplemental support by UAS team members is just that – supplemental.Any WSU UAS that does not have a fully functional (automatic) flight termination system (FTS) will be required to have a secondary, independent FTS that can be activated manually by the UAS PIC. As all WSU operations will occur outside of 5 nm of airport boundaries and outside of Class B, C and D airspace, universal communications (UNICOM) will be used to control the airspace and handle de-confliction. In addition, positive radio contact must be maintained at all times. In all cases, the use of electronic devices, other than for UAS flight and mission required usage, will be selected in accordance with FAR 91.21, unless specifically authorized under Special Provisions of the COA governing the flight operations. All flight termination points not included in normal recovery points will be determined based upon direct visual inspection via manned aircraft/ground observation. This list will be promulgated prior to commencement of each flight, including location (Lat/Long/Elevation), surrounding terrain, access roads, fire risks/levels, and environmental impacts. Selection will be based first and foremost upon prevention of loss of life or damage to persons or property in the air or on the ground, along with such factors as weather (snow, heavy mud, ice, flooding, and fire hazards), agricultural activity (fallow or seasonally vacant fields versus active farming), unexpected human activity (e.g., unplanned campers), and access to the recommended flight termination points (roads, etc.) for aircraft recovery/HAZMAT operations.Prior to any flight (or repeated series of flights), WSU UAS users/staff will notify local public safety officials (in writing) with pertinent information, including all planned UAS schedules and emergency termination points. In addition, homes and businesses located in an area where an off-normal event is occurring will be contacted via phone (or in person) and provided with instructions on what to do if the UAS has impacted at their location. Section 8: UAS Emergency ProceduresAll WSU UAS will require an FTS. Specific Fail-Safe/FTS will vary based upon the UAS design and implementation, varying from hold-mode (continued flight on current path) to full fail-safe mode of operation. For WSU UAS operating areas, hold-mode will not be allowed, as it could allow the UAS to depart the area in uncontrolled flight. When autonomous return (return home) is available, it shall be used, followed by throttle down and orbit mode, and, as a last resort, followed by controls being set to implement an immediate ground impact/crash to ensure that the UAS stays within the assigned operational area. All WSU UAS users must be able to show a graceful degradation to lesser modes of operation, in case of partial UAS control system failure. This could range from climb and hold, to automatic navigation through a series of waypoints to bring the UAS to a safe location for autonomous recovery. For fixed wing (or long range rotary wing) engine to idle will occur first, in order to provide additional time to attempt to reestablish command link interface. Note: Until further notice, fully autonomous flight by WSU UAS is not authorized, nor will a COA application addressing autonomous flight receive approval by WSU for forwarding to the FAA.Ultimately, each UAS emergency contingency plan must be based on the specific UAS for the specific operating area. The WSU UAS user will draft addendums to this SOP, for final review/approval by WSU UAS Operations Advisor, that clearly meet the requirements of this SOP and ensure maximum safety of flight and graceful degradation of the UAS system.If lost-link occurs and the radio-control system does not employ its assigned fail-safe mode of operation, the UAS control system will be required to place control surfaces of the UAS into a continual turning position at reduced throttle level in order to maintain the UAS within the assigned operating area, while the PIC attempts to reestablish the link.If the UAS fails to respond to commands from the PIC, the following action will be immediately taken:WSU Controller/PIC will contact cognizant airspace ATC on the assigned frequency, providing notification of fly-away/lost-link condition, and the UAS’s last known position, heading, airspeed, and altitude.UAS Controller/PIC will broadcast a warning on the local UNICOM frequency every 3 minutes, stating the type of UAS, and its estimated location/altitude of the UAS. Additional broadcasts on other frequencies will be made when necessary, based upon local airspace activity.WSU UAS onsite users will contact the standby chase team (whether on the ground or in the air), to initiate a search for the UAS, unless the UAS has remained within visual sight of the UAS PIC. Chase team members cannot include the UAS PIC or VO. If communications are reestablished, the UAS will be recovered and all future flight operations will cease. A full written report will be provided to the WSU UAS Operations Advisor within 24 hours of the incident, in order to determine the cause of the problem and confirm whether operations can continue.Section 9: Downed UAS Recovery Procedures/Environmental ImpactsRecovery of downed UAS assets will be performed in coordination with local county emergency crews in order to ensure that all applicable HAZMAT requirements are met, in the same manner as that of a downed manned aircraft. A prearranged plan of action (pre-accident plan) will be established prior to each flight, so that responsibilities for all recovery responders are clearly defined. This may be as simple as a declaration of minimal HAZMAT impacts (i.e., a single NiCad battery for a quadrotor), or extensive (i.e., a fixed-wing UAS with NiCad batteries, aviation fuel and lubricant oil carried onboard).At all times, the appropriate firefighting and HAZMAT equipment for the UAS operation being conducted shall be carried by the WSU UAS team; a checklist of this equipment shall be added to the SOP addendum for the operation.Private property shall not be accessed until permission of the owner and/or occupants has been granted. Section 10: Privacy Rules/ConsiderationsWSU’s privacy rules are – in part – derived from current draft legislation being considered by Congress, including MRW 13745 (sponsored by Senator Ed Markey of Massachusetts), and House Bill 2178, cosponsored by Congresspersons Morris and Morrell of Washington. These rules are neither cumbersome nor hard to follow, but they MUST be followed.WSU UAS users will document the following for each flight (or series of flights):Type of data to be collected (video, still pictures, etc.).Data storage medium (onboard processor, ground station thumb drive, etc.).Specific kinds of information/data that the WSU UAS research team might inadvertently collect on an individual (or a group of individuals) not involved with the WSU research/UAS operations.Based upon such information, the following must be documented by the WSU UAS user, within the SOP addendum, prior to completing the draft COA:How the collection or retention of information or data that is unrelated to the specified research will be minimized.Whether such information or data might be sold, leased, or otherwise provided to third parties, and if so, under what circumstances it might be so sold or leased; The period for which such information or data will be retained, as well as how it will be destroyed.The possible impact the operation of the WSU UAS may have upon the privacy of individuals;The specific steps that will be taken to mitigate any possible unauthorized disclosure of information or data (e.g., encryption methods and/or other security features); A telephone number and email address that an individual with complaints about WSU UAS operations may use to report such complaints, as well as to request confirmation that personally identifiable data relating to such individual has been collected; A reasonable process for the individual to request to obtain such data in a timely and an intelligible manner.In all cases, WSU UAS users and staff shall design operations to minimize collection of information and data unrelated to ongoing operations.In addition, WSU UAS users shall:Clearly and conspicuously label the UAS as being from WSU (with contact information on the UAS);Ensure consent for operation above private property, including the landowner and any tenants who have a right to occupy the property, after having received actual notice that the UAS is equipped with an imagery or other sensory device from which personal data could inadvertently be collected; and,Ensure that the WSU UAS is flown above public lands in a manner that does not unreasonably interfere with the rights of others/not otherwise prohibited.The WSU Office of __________ shall provide oversight of privacy issues for all WSU UAS operations. Section 11: Public AwarenessMaximizing public awareness of WSU UAS operations is a key part of successful UAS operations within the community. General best-practice communications include:Identifying a WSU spokesperson for each approved COA;Developing a dedicated WSU UAS website with information about upcoming flights, research being conducted, contact information, and an opportunity for visitors to take a virtual look at the UAS being used – and the impact it will have on ongoing research;Maintaining a list of frequently asked questions (and answers) available on the website;Staging a yearly open house to showcase the type of research WSU is conducting, the type(s) of UAS being used, and a chance to dialog with WSU UAS research and operations staff;Sharing emergency planning steps (i.e., what to do if you see a UAS crash, or fly-away UAS) with local law enforcement and first responders;Posting informational videos on various research efforts, including the associated benefits of research using UAS;Broadcasting Public Service announcements on radio and television about WSU UAS operations, including interviews on WZUU;Publishing announcements in local or regional print media;Establishing a toll-free public ‘hotline’ telephone number to report a downed UAS or to register complaints regarding UAS operations, including privacy and noise complaints;Ensuring local airports using AWOS are provided with information for broadcast to pilots in the local systems at airports surrounding UAV operational areas. AWOS can provide automated announcement of WSU UAS scheduled/ongoing UAS operations, as well as emergency announcements of fly-away/downed UAS.Adding WSU UAS information to ATIS updates, providing situation awareness to pilots operating in the area of WSU UAS operations; and, Announcing WSU UAS operations via NOTAM.Section 12: FAA Reporting RequirementsRoutine UAS FAA reporting requirements will be done in accordance with the approved FAA COA. All FAA reporting will be presented to OGRD Director________________ for final review, a minimum of five working days before the FAA reporting deadline. Accident/incident reports will be done in accordance with standing FAA Federal Aviation Regulations (FAR), as amplified upon by COA guidelines/instructions. Although some requirements may be similar to FAA Notice N8020.11C, Aircraft Accident and Incident Notification, Investigation, and Reporting (2 February 2010), the COA will provide specifics focused on the accident/incidents reporting related directly to the approved UAS operations. NO REPORTS are to be forwarded to the FAA prior to review by the WSU UAS Operations Advisor and OGRD Director________________.It is important to remember that the newness of UAS operations means a void in regulations needed to operate efficiently. It is the role of all WSU UAS personnel to accurately document concerns/deficiencies found in such regulations, in order for WSU to report same to local FAA representatives.Section 13: WSU Reporting RequirementsIn addition to all reporting required by the FAA, WSU UAS users will:AppendicesAppendix A: COA ChecklistThe following must be completed prior to approval and release of any draft WSU UAS COA:Initial request for use of UAS in support of WSU funded researchValid airworthiness certificateIdentification of currently certified WSU UAS PICIdentification of currently certified WSU UAS VOIdentification of currently certified WSU UAS PIWSU UAS SOP Addendum, including:Flight PlanCommunications PlanProperty/Usage Approval Letter (if not WSU property)Local Landowner Notification PlanPublic Affairs PlanPrivacy PlanEmergency Action PlanLost Link/Flyaway ProceduresStandby Chase Team ProceduresHAZMAT PlanIncident Reporting PlanExport control statementInsurance coverageCompleted draft FAA UAS COAWSU UAS Operations Advisor Recommendation for COA ApprovalWSU Office of Grant and Research Development_____________ Approval Letter52959001281430A-1Appendix B: List of WSU Certified Pilots/Assigned UAS GroupNAMEUAS GROUPCURRENT (Y/N)EMAILTELB-15295900413385Appendix C: Acronyms and AbbreviationsAFDAirport Facilities DirectoryATISAutomatic Terminal Information ServiceAWOSAutomated Weather Observation SystemCOACertificate of AuthorizationDODDepartment of DefenseDUATSDirect User Access Terminal ServiceFAA???????????????? Federal Aviation AdministrationFARFederal Aviation RegulationFBOFixed Base OperatorFCCFederal Communications CommissionFTSFlight Termination System?GCSGround Control StationHAZMATHazardous MaterialLOSLine of SightMOAMilitary Operations AreaNASNational Airspace SystemNOTAMNotice to Airmen?PIPrincipal Investigator?PICPilot in CommandSAASee and AvoidSOP????? ??????????? Standard Operating ProceduresSTASpecial Temporary AuthorizationUAS???????????????? Unmanned Aircraft System – or – Unmanned Aerospace SystemUNICOMUniversal Communications?VOVisual ObserverWSUWashington State UniversityC-152959006248405257800472440Appendix D: FAA References/Rules and RegulationsAC-91-57 – Model Aircraft Operating Standards (June 9, 1981)Aeronautical Information Manual (AIM) (3 April 2014)FAR Part 61 – Certification: Pilots, Flight Instructors, and Ground InstructorsFAR Part 91 – General Operating and Flight RulesN8020.11C – Aircraft Accident and Incident Notification, Investigation, and Reporting8900.1 CHG 351 – Unmanned Aircraft SystemsN8900.227 – Unmanned Aircraft Systems (UAS) Operational Approval (30 July 2013)N8900.268 – Education, Compliance, and Enforcement of Unauthorized Unmanned Aircraft Systems OperatorsD-15295900588645Appendix E: Points of Contact ListE-15295900375920 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download