Veterans Affairs



Overbed Table Nemschoff Oasis or Equal Estimated Quantity: 24Oasis overbed tablesHeavy-duty steel constructionRounded inside tray edgesColumn mechanism with roller bearingsGreenguard Gold CertificationLaminate topUrethane spill-containing edge2” minimum clearance baseLimited Lifetime Warranty; 5 yearsX or U shaped baseAdjustable caregiver trayFixed patient trayFramed vanity mirror with storageBedside Cabinet Nemschoff Pristo II or Equal Estimated Quantity: 24Pristo II bedside cabinetLaminate caseDurawrap tops, drawer fronts, doors and bottomsSecondary top surface with nickel-coated posts2” twin-wheel front-locking castersGreenguard Gold CertificationReplaceable componentsWood drawer pansVented back panelConcealed hingesIntegrated pullsNemschoff healthcare wood finishLimited Lifetime WarrantyLockableDrawer linersPatient ReclinerWieland Cove or Equal Estimated Quantity: 20BASEThe base is made of 18mm Birch Plywood to which two upright 12mm birch plywood mechanism- mounts are attached. The edge of this unit is coated with a textured high-durability polyurethane finish. To the two mechanism-mounts are attached two 27 pivot, 20 member, lever activated, steel reclining mechanisms, to which, in turn, are attached the seat, ottoman, mid-ottoman and back support members. The reclining mechanisms are each attached to the mechanism-mounts by three 1/4-20 x 3/4" socket head cap screws.ARMSThe arm frames consist of two 9mm birch plywood panels, with 18mm birch plywood and 3/4” plywood inner framing. The feet are made of 2 13/16” x 2 3/8” finish-grade hardwood. The arms are attached to the base by 5/16-18 x 2 1/2" button head cap screws and two 5/16”-18 threaded steel rods which pass through the frame and into steel T-nuts mounted in the arm frame. A secondary arm security is created by two 5/16-18 fully threaded steel rods, capped with joint connector nuts, which pass through the wood feet, the base, and the arm and are threaded into steel T-nuts that have been epoxied into the wood caps, thereby securing all of these components together.Each arm is equipped with an integral-skin polyurethane cap. These arm caps are non-marking, oil- resistant and immune to alcohol-based cleansers.SEATSThe seat frame consists of 1 1/8" and 3/4" plywood. Sheet webbing, composed of high strength polyester monofilament, is stretched from the front to the back to form the seat deck. This webbing is unaffected by fungus, urine, mildew and healthcare cleansers, and will retain its elasticity in excess of 250,000 seating cycles. The seat deck is secured to the reclining mechanisms by six 1/4-20 x 3/4" socket head cap screws which are fastened into steel inserts in the seat frame.The seat cushion is 6" thick polymeric urethane foam of a 1.65 pound minimum density with an IFD of 28-32 pounds.BACKSThe back frames consist of 1 1/8", 3/4“ and 3/8" plywood, and 3mm birch plywood. The back frame is attached to the reclining mechanisms by six 1/4-20 x 1" socket head cap screws into steel T-nuts.The polymeric urethane contoured back cushion is as thick as 4” and is 1.65 pound minimum density with an IFD of 1-15 of pounds.OTTOMAN AND MID-OTTOMANThe ottoman and mid-ottoman consist of 9mm birch plywood and are each attached to the reclining mechanisms by four 1/4-20 x 1/2" socket head cap screws into steel T-nuts. The ottoman is covered with urethane foam of a 2.5 pound minimum density with a ILD of 60-70 pounds.UPHOLSTERYAll upholstery fastens with hook and loop tape, facilitating removal and replacement of covers. Upholstery seams are double-needle-top-stitched.FILLING MATERIALSAll foams within this series are guaranteed for 25 years and are flame-retardant to meet major state fire codes (Cal. Tech. Bulletin 117). Special treatment is available to meet the Boston and New York Port Authority codes as well as California Technical Bulletin Number 133 with select fabrics.WATERPROOFINGWieland laminates a waterproof polyurethane membrane to the polymeric urethane foam which protects them against spills. This membrane has a tensile strength of 8,500 PSI (ASTM 882), an elongation rating of 450% (ASTM 882) and a tear strength of 400 lbs. per inch (ASTM D-1044). It also is waterproof, mildew-proof, and washable.ASSEMBLY AND DISASSEMBLYAll components are assembled and disassembled with a single 3/16" hex key wrench, with the following exceptions: 1) the plastic guard that protects the fabric behind the brake pedal and mechanism handle which can be removed with a Phillips screwdriver; 2) the optional push bar which can be removed using a ?” open end wrench; 3) the optional I.V. poles is removed with a 7/32” hex key wrench; 4) to remove the recline assist lever a 7/16” inch open-end-wrench is needed in conjunction with the standard 3/16” wrench; 5) to remove the E-clip on the brake-pedal rod a slotted screw driver is helpful. CASTERSThis chair comes equipped with 6 heavy-duty casters. The two 3?” center casters are stationary and are equipped with a brake system operated by a single pedal. This brake pedal transfixes the left arm and is actuated by applying pressure to the front to lock, and the rear to release. The four 2” “outrigger” swivel casters allow the chair to rotate with a zero turning radius3.0 SLEEP POSITIONPneumatic cylinder allows for user to easily select from an infinite number of positions. Positioning of inside control is placed to be reachable by both the user and the staffDIMENSIONS:OVERALL HEIGHT:43.75" 43.75”RECLINED HEIGHT:33.50" 33.50”OVERALL DEPTH:34.75" 34.75”RECLINED DEPTH:65.00" 65.00”OVERALL WIDTH:29.2531.25”SEAT HEIGHT:19"19”SEAT DEPTH:20.5"20.5”SEAT WIDTH:21.5"23.5”ARM HEIGHT:24.75" 24.75”ARM DEPTH:30.5"30.5”ARM WIDTH:3.5"3.5”WEIGHT:116 lbs.125 lbs.Folding Chair Wieland Ply fold or Equal Estimated Quantity: 40SIZEHeight 32 1/2Seat Ht 18Depth22 3/4Seat Wd 16 1/4Width21Weight 15 lbs.LEGS, BACK AND SEAT SUPPORTSMade of 22 plies of 1/16 hardwood laminations, pressed, formed and finished to 1 3/8FRONT AND REAR RAILSSolid Hardwood 1 1/16 x 2 1/4 that are mortise and Tenon joined and epoxy glued into the legs.SEATRemovable panel made of 7 plies of 1/16 hardwood laminations, pressed, formed and finished to 7/16 with a 1 1/2 thick high quality polyurethane foam cushion and fabric.CHAIR BACKPermanent panel constructed of 11 plies of 1/16 hardwood laminations pressed, formed and finishing at 11/16.UPHOLSTERED BACK CUSHIONRemovable front panel made of 4 plies of 1-16 laminations pressed, formed and finishing at 1/4 with a 1 thick high quality polyurethane foam cushion and fabric.WOOD SPECIESSelect northern hardwoods.GLIDES7/8 plastitack glides standard.FINISH MATERIALS & METHODSFirst application is an organic pigment, grain enhancing stain. The second application is a high solids catalyzed sealer. After the sealer is dry, it is sanded. Final application is a #55 gloss high solids mar-resistant catalyzed finish. Finishes are E.P.A. compliant.WARRANTYChairs are warranted against defects in materials and workmanship for a period of ten years from date of delivery.TESTINGProduct meets applicable Standard Tests per ANSI/BIFMA X5.1 - 1993 or ANSI/BIFMA X5.4 - 1990.Sleep Sofa Wieland Sleeptoo or Equal Estimated Quantity: 20Removable and Replaceable UpholsteryEvery piece of upholstery is removable and replaceable on-site. This allows for each individual piece of upholstery to be replaced and maintained in compliance with all Environment of Care requirements. Sewn seams are triple stitched and reinforced. Most upholstery is fastened with hook and loop tape, facilitating easy removal, replacement or adjustment. If seating needs to be moved to other areas it can easily be recovered to match existing seating or new décor.Moisture BarrierFoam cushions are laminated with moisture barrier in areas exposed to spills. This prevents fluids from penetrating into the foam cushion and enhances clean ability while also preventing the degradation of the foam caused by the abrasion of the upholstery backing. The moisture barrier resists tearing and is waterproof, mildew-proof, and ponent ConstructionAll components are removable and replaceable on-site. This means that individual components, if damaged, can be replaced at a fraction of the cost of sending the product out for repair. Arms, arm caps, legs, feet, cushions, front edges (literally each individual component) can be removed and replaced. This provides for an option to easily maintain the product at a low cost for many years. This can significantly extend the life of the product.Metal to Metal ConnectionsAll components are attached with Metal to Metal connections, and threaded fasteners. Most fasteners are keyed with a single hex wrench. This allows for the removal and replacement of components without degrading the security of the component which occurs in wood to wood or wood to metal connections. Metal to metal connections can reuse without degradation. Depending upon options, one or two additional tools may be required.Sleep ConversionThe front side of the back provides the backrest of the seating position. The opposite side becomes the sleep surface after activating the conversion mechanism. The button that activates conversion to a sleep service is covered with silicone plastic to seal the mechanism from liquids.Adjustable TableThe table is adjustable to three heights: seat height, arm height and dining table height. A brake system locks the table in these positions. The lock is disengaged by a pull handle located under the top. An interlock is engineered into the brake system which prevents the brake from unlocking when the table has a load of 5 pounds or more. The weight capacity of the table is 500 lbs. in the seat height, and 300 lbs. in the arm and dining table height positions.WarrantySleepToo is warranted against defects in materials and workmanship and against structural damage incurred through normal use for a period of 25 years from date of purchase with the following10 yearssleepToo? ottoman mechanismsleepToo? table mechanism2 yearssleepToo? drawer slidesThis warranty covers the structure of the furniture: the laminated veneer or solid wood frame, the construction of the arms, table legs and stretchers, and all fasteners and moving parts. This warrantyalso covers the foam against defects in its manufacture and composition and against sagging (not maintaining its original shape), for this same 25-year period.Under this warranty, Company will, at its option, either replace or repair furniture returned to it or will supply the Customer with replacement parts. Any labor required to upgrade the units may or may not be covered under our warranty without prior consent in writing by Wieland. Any work performed by a non-approved 3rd party may void the warranty. All freight charges for returns or replacements will be paid by Company during the 25-year warranty period. Fabrics, finishes, COM–and all items beyond the control of Company are not covered by this warranty.All other express or implied warranties, made by sales representatives, agents, or other representatives, including any warranty of merchant disability or fitness for a particular use, are hereby excluded. Company’s sole obligation shall be to repair or replace any product covered under this warranty which proves defective during the warranty period. In no event shall Company be liable for any consequential or incidental damages, including lost profits incurredWIELAND FABRIC WARRANTYWieland has assembled an extensive card offering featuring a wide selection of fabrics, woven Cryptons, and vinyl’s selected for their performance in healthcare environments. These fabric patterns sampled by Wieland through Architex, C.F. Stinson, Maharam, and Momentum fabric cards are warranted, if purchased through Company, for a period of five (5) years, 24/7 usage. All other fabric patterns from C.F. Stinson, Maharam, Momentum and Architex, if purchased through Wieland, are warranted for a period of three (3) years, single shift usage. Company warrants these textiles to perform under normal conditions as furniture upholstery and when cared for according to cleaning and maintenance guidelines provided by the textile supplier.Proper care and cleaning is imperative for maximizing textile performance on Wieland products. However, in the unlikely event that one of these fabrics, woven Cryptons?, or vinyl’s does not perform in accordance with manufacturing specifications when used and maintained under normal conditions and the user has not misused, cleaned or attempted to clean the fabric or vinyl using cleaning agents or procedures not suggested or approved by the textile supplier, Company will replace the fabric free of charge.TECHNICAL ADDTIONS FRAMEFrames are built from 1-?” square 12 gauge steel tube which are mounted to the arms via an injection molded universal bracket. These universal brackets also provide the means for mounting the seat frames, optional ottomans and drawers. On the table models the table mechanism bolts directly to the square tube frame.ARMSThe arm frames consists of 12mm plywood. It is wrapped with 45 IFD – 1.8 lb/ft? density polyurethane foam. The arm top is also cushioned with a base of 61 lb IFD – 3.0 lb/ft? foam.BACKS/SLEEP MATTRESSThe backs are made of six inches of 21 IFD – 1.8 lb/ft3 density polyurethane foam. The front side provides the backrest of the seating position while the opposite side becomes the sleep surface with the activation of the conversion mechanism.SEATSThe seat cushions are built with a 1-1/2” spring cartridge base which is overlaid with 4” of 26 IFD –1.8 lb/ft3 density polyurethane foam.FOAM URETHANE SPECIFICATIONSAll foams within this series are flame-retardant to meet major state fire codes (Cal. Bulletin 117). Special treatment is available to meet the Boston and New York Port Authority codes as well as California Technical Bulletin 133 with select fabrics.Back Cushion – 21Outside Back - 100Arm sides - 45 Seat core-26Front Edge - 26 Arm top - 61214561100Density – lbs./cu ft1.8 1.7 3.0 2.1IFD @ 25% -lbs./50 sq in 19-23 45-55 56-66 95-105Fire Codes:California T.B. 117 Section AIpasspasspassPass California T.B. 117 Section DIIpasspasspasspassFABRIC ATTACHMENTAll upholstery, except for several small components, fastens with hook and loop tape, facilitating removal and replacement of covers. On small components such as ottoman foot rest, the upholstery is stapled directly to the plywood panel. For replacement the entire component will be supplied.STITCHINGAll sewn seams are triple stitched and reinforced with cloth basting tape.MOISTURE BARRIERSauder laminates a waterproof polyurethane membrane to the polymeric urethane foam. This membrane has a tensile strength of 8500 PSI (ASTM 882), elongation rating of 450% (ASTM), and a tear strength of 400 lb.per square inch (ASTM D-1044). It is waterproof, mildew-proof, and washable.ASSEMBLY AND DISASSEMBLYAll components are assembled and disassembled with threaded fasteners. Most are keyed with a 3/16” hex wrench. The exceptions are the table release handle (X/X hex) and wood base trim ( #2 Phillips).ADJUSTABLE TABLEThe table is adjustable to three heights, seat height, arm height and dining table height. A brake system that locks the table in these positions is disengaged by a pull handle located under the top and centered in width. An interlock is engineered into the brake system which prevents the brake from unlocking when the table has a load of 5 pounds or more. The weight capacity of the table is 500 lbs. in the lower position and 300 lbs. in the high position.BACK CONVERSION MECHANISMA mechanism inside each arm governs the motion of the back cushion. From the sofa position the back rises to clear the seat - then rolls forward to rest on it. The mechanism pair is synchronized by a timing tube that assures the back remains level and free from binding. The rising action is provided by gas springs which offset the weight of the cushion. A latch holds the mechanism in the sofa position and is released by a button located at the rear of one arm. This button is shrouded with silicone plastic which seals the works from liquids.Desk , Workstations, Storage, Keyboard Trays and Monitor Arms Terrace DNA with Cadence Desking or Equal Estimated Quantity: 17 Desk / Workstations Tackable Acoustic PanelsTerrace DNA Specifications Panel Frames ? Constructed of 16 gauge formed steel vertical members and 16 gauge tubular steel horizontal members that are welded into a strong, sturdy structural panel frame. ? Panel frames are 2.625” thick. ? Frames ship fully assembled. ? Panel frames are available in 6 widths (24”, 30”, 36”, 42”, 48” and 60”) and 5 heights (35, 42.5”, 50”, 57.5” and 65”). ? Panels are UL listed and labeled. ? All panels are capable of being powered at base, below worksurface and beltline. ? Lay-in data ability at base rail and under top cap. ? All panels meet or exceed ANSI/BIFMA testing standards. ? Panel top caps, end covers and base rails are constructed of metal (Veneer top caps and trim are available). ? Leveling glides provide 2.625” of adjustment. ? Base rail covers (24” – 60” wide) have receptacle openings to allow installation of electrical components/receptacles. ? Accepts the following tiles: o Tackable Acoustic, Ported, Monolithic, Ported Monolithic, Glazed (single pane), Perforated Steel, Hard Surface (melamine), Landscape? Surface (Infinite Spectrum?/ Pantone?, Mulberry Paper, Pearlescent Strata?, and Foundation?), Marker Board (painted steel), Tool (slotted metal-accepts hanging accessories), Steel, Veneer (Cleargrain?), and Custom (with use of Custom Tile Kits). ? Stackable to 110” with load bearing capabilities on the first two stacking frames. ? Trim components available in all core and select colors (end and top cap trim is available in veneer). ? Two trim styles are offered: painted Radius and veneer Radius. Stacking Frames ? Available in 15”H, 22.5” and 30”H. ? Constructed of formed steel vertical members and tubular steel horizontal members that are welded into a strong, sturdy structural panel frame. ? Load Bearing. ? Stacking ability on base frames to 110”H. ? Accepts all tile styles. ? Accepts power and data. ? Lay-in (data) ability under the top cap in all stacking frames. Panel Connectors ? Connectors provide rigid, full length metal-to-metal connection. ? Connector kits include top cap, connectors, vertical cover and attaching hardware. ? “L”, “T”, “X”, and“S”connections will add 2.75”to overall length of the panel run. ? 120-degree connectors available in the standard offering. ? “E” End Trim Kit adds 0.375” to panel run. ? Two trim styles are offered: painted Radius and veneer Radius. Tile Options Tackable Acoustic Tiles: ? Fabric covered. ? Sizes – 7.5”, 22.5”, 15” and 30” segment tiles and monolithic tiles all in corresponding panel widths. Fabric Port Tiles: ? Fabric covered. ? Receptacle openings have the ability to accept most commercially available modular data faceplates. ? Tackable and Acoustical. ? Size 7.5”, 22.5”, 15”, and 30” in all corresponding panel widths. Monolithic Tackable Acoustic Tiles: ? Fabric covered. ? Sizes – 42.5”, 50”, 57.5”and 65” high in all corresponding panel widths. Monolithic Port Tiles: ? Fabric covered. ? Receptacle openings with blank cover (1 in 24”W tiles and 2 in wider tiles). ? Monolithic tiles and segments tiles can be used on opposite sides of the frame to create various aesthetics. ? Sizes – 42.5”, 50”, 57.5” and 65” high in all corresponding panel widths. Hard Surface Tiles: ? MDF Construction. ? Three laminate colors: Whitestone, Beigestone, and Black. ? Non-Acoustical. ? 15” and 30” segment tiles in all corresponding widths. Tool Tiles: ? Non-acoustical. ? 7.5” and 15”H with all corresponding widths. ? Painted metal surface available in Core and Select paint options. Electrical and Data ? Terrace panels are UL 1286 listed and UL183. ? Electrical components are UL listed and CSA certified. ? Terrace offers a choice of *four electrical systems: o Four-circuit, 3 + 1; o Four-circuit, 2 + 2; o Three-circuit, separate neutrals; o Eight circuits, two four circuit systems provided back to back. ? All *four systems utilize an 8-wire electrical system, rated at 20 amps per circuit (15 amps Canadian). ? Electrical power harness accepts up to 4 duplex receptacles per panel side (24”W limited to 2). ? Base rail power in-feed mounts into any receptacle location in the base rail area and is connected to the building power supply. ? Beltline and below work surface areas accommodates power and data or communication lines. ? Fiber optic and other data cabling can be routed through 90O interactions, with a 4.5” bend radius for .22” dia. cable. ? Capacity for lay-in cabling is provided underneath panel top caps (8 .25 diameter cables) and at base rail (27 cables w/ electrical and 74 cables w/out electrical - 0. 25 cables/60% fill). ? Cable openings in frame permit cables to be run between frames at beltline. Up to 62 cables without electrical and 46 cables with electrical (.25” diameter- 60% fill.) can be routed horizontally at beltline. ? Data cabling can be routed vertically through frame members. Vertical capacity through the panel frame allows for 64 cables (0.25” dia. 60% fill) in a 36” wide or greater panel. ? Data faceplates can be mounted in vacant receptacle openings. ? Integrated power pole accommodates power in-feed and communication/data lines (69 cables 0.25 diameter at 60% fill). ? Externally mounted consolidation box accommodates AMP NETCONNECT? Modular Cabling uses a Zone Distribution strategy for voice and data cabling. (AMP NETCONNECT components meet TIA / EIA standards for CAT 5E, CAT 6 and fiber-optic cabling, and are backed by a 25-year AMP NETCONNECT Performance Limited Warranty. Various individually color coded lengths are offered). Panel-mounted Screens ? Frameless Glass Panel-mounted Screens are available in 7.5” and 15” heights. Glass screens are available as Clear and double-etched Frosted Glass. ? Available in widths of 20”, 24”, 30”, 36”, 42”, 48”, 60”, 72”, 84” and 96”. Work surfaces ? Work surfaces are 1.25” thick. ? Work surfaces are 3 ply (high pressure laminate, particleboard and a resin-impregnated backer on the underneath side). ? Available in multiple edge options (T-mold, Flat Edge, Eased Edge, and Wave Edge). ? Threaded metal inserts are standard for ease of installation and a positive fit. ? Non-handed work surface supports are available. ? Work surfaces can be panel hung or used in freestanding applications. ? Imbedded metal stiffener is standard on 48”W or wider surfaces to minimize deflection without interfering with below-surface storage.End panels and support legs are non-handedLateral Files Essentials Lateral Files: ? Drawers and doors lock on both sides to prevent being pried open. ? Interlock system inhibits roll-out of more than one drawer either sequentially or simultaneously. ? Double bottoms are welded into all files for added rigidity. ? Leveling glides can be adjusted from outside or inside the case. ? Telescoping, ball-bearing slides. ? Core removable locks feature allows key numbers to be easily changed in the field. Lock core can also be omitted. ? Files have two knockouts on each side to allow for easy ganging of freestanding units to inhibit tipping. ? Durable baked enamel finish is applied over rust-inhibiting phosphate pre-treatment. Drawer interiors and all accessories are painted gray. ? Counterweights included and factory-installed as required. Overhead Storage Units are constructed of steel with a baked enamel surface.Units are standard with an anti-dislodgement device.Units are factory welded and pre-assembled.Inside clearance depth accommodates three-ring binders, and varies with type of door specified.Available door styles: Radius Door, Radius Door with Arch Pull, Radius Door with Fabric Front, Receding Door with Recessed Pull, Flat Door, Flat Door with Fabric Front.Overhead cabinets can be mounted off-module on a panel up to 18” narrower than the overhead cabinet.Master keyed core removable locks allowing one-key access.Balance 2 swivel mouse (auto tilt / height gauge)416306015176500Description:The Balance 2 SW has some features that the Balance 1 SW does not have. With automatic tilt, a height level indicator, and the ability to come above the desk, Balance 2 SW is the ultimate solution. With a lift and lock mechanism and a swivel mouse surface to get the mouse closer to your body (with independent tilt from the platform to keep in from rolling off when in negative tilt) this solution seems to work well for the majority of end users no matter what the scenario.Specifications:PLATFORM1/4" ultra-thin phenolic tray with swivel out mouse for maximum leg clearancetilt and swivel mouse surface with gel mouse pad provides infinite adjustmentsliding mouse catcher with wire managerdurable and comfortable polyurethane palm rest19 1/2" x 11 1/2", plus 8-1/4" diameter mouse surfaceMECHANISMANSI/HFES, 100-2007 and BIFMA G1-2002 compliantErgonomic, low profile arm and tray head give the arm a sleek, thin design to save space under desk8.88” adjustment range with 2.38” above the track and 6.5” belowADA Compliant tilt and height adjustment controlsHeight and tilt indicator incorporated together in an intelligently designed dashboardEasy access to tilt control knobConcealed hardware and braking mechanism and integrated cable management360° rear swivelDesigned for disassembly & fully recyclablePositive tilt lockout option standard (can be removed in the field)19" storage track with mounting hardware standardDesk Series, two monitors49168056413500Description:The superior APEX Height-Adjustable Column Mounts are the perfect solutions for the office, healthcare facilities or home. Provides the maximum amount of both dynamic and manual height adjustment for the ultimate ergonomic solution. Key enhancements have been made to Symmetry's patented APEX Series. Effortless fingertip monitor positioning, APEX monitor mounts float your displays in the optimal ergonomic position above your work surface to create a more productive and comfortable work environment.?Monitors less than 7 lbs. must use the Apex counter weight to enable arm to balance properly: model: Apex-CW, Specifications:Desktop Thickness Range: 0.50 - 2.50" (12.7 - 63.5 mm)Dynamic Height Adjustment: 13" (330.2 mm)Maximum Extension: 21.6" (571.0 mm)Minimum Depth: 2.45" (62 mm)Mounting Pattern Compatibility (Universal Versions): 75 x 75mm ,100 x 100mmNumber of Monitors: 2Orientation: Landscape, PortraitShipping Weight: 17.40Tilt: +75°, -10°Typical Screen Sizes: 10 - 30" (254 - 762 mm) diagonalsWeight Capacity: 5 - 25 lbs. (2.3 - 11.3 kg) per monitorOn our GSA Contract:yesFinish Options:silverWarranty:Apex arms are warrantied to be free of defects in material and workmanship for 10 years. All warranties are in effect beginning the date the product was invoiced by Symmetry. Gas cylinder and one-way bearing mechanisms have a 5-year limited warranty. All warranties are in effect for the original purchaser only. Symmetry disclaims liability for any modifications, improper installation and/or installations over the specified weight capacity. Symmetry also disclaims liability for any modifications made to electrical mechanisms, improper installation, incorrect voltage connection and/or installations over the stated weight capacity.Lead Time:one weekSide Chair Sit On It Focus Side Chair or Equal Estimated Quantity: 26Mesh back, with casters as possible optionAvailable 13 bleach cleanable mesh back colors- TBDSeat Upholstery – TBD Silver frame accentWaterfall seatMesh back model stacks 4 on the floorLifetime Warranty300 lb. weight capacityOverall Width with Arms 24.5Overall Depth 26Seating to come with a lifetime warrantee, Lifetime warranty means the entire time owned by the original purchaser for all chair components including pneumatic cylinder, control mechanism, base, glides, casters, frames and other structural elements.Breakroom / Office and Waiting Room Round TablesAllsteel Merge Tables or Equal Estimated Quantity: 4Dimensions: 30”, 36”, 42” or 48” Round Work surface Core Material: 45 Pound Density Particleboard Edge Material: PVC T-Mold Work surface Material: High-Pressure Laminate Work surface Thickness: 1.25”Work surface Particle Board Grade: ANSI Grade IM3 or Better Base: X – BaseFinish: Painter Aluminum, casters or Glides Weight Testing: 200lbs. Glides Adjustability: .5” Color: Black Glide Height: 1.23” Certification: BIFMA Level 2 Certification Rectangular Workroom Tables Allsteel Aware Tables or Equal Estimated Quantity: 4Flip-Top Tables Overall Depth: 24” Overall Height: 72”Work surface Core Material: 45 Pound Density Particleboard ABS, ANSI Grade M3 or Better Surface Material: High-Pressure Laminate Grommets: Optional Surface Bonding: PVA Top Thickness: 1.184” Edge Detail: Flat, .079” Base Type: T-leg Modesty Panel: Steel Horizontal Cable Management: Extruded Plastic Trough Capacity Weight: 200 lbs. BIFMA Level Certification Table Base Dimensions: 18”D x 29.375”H, Distance between legs 64.375”Base: Painted AluminumCasters: Soft Nylon Caster Size: 2.975 mm Testing: ANSI – BIFMA UL 1286 Standard for Safety Office Furnishings Electrical and Data : Available Power/Data Dome: Dimensions: 4.5”D x 1.5”H x 8.375”WBIFMA Level 2 Certification Waiting Room Guest Chair Carolina Orchestra or Equal Estimated Quantity: 4Frame Construction:Seat-plywood seat EZ frameseat kiln dried WHAD mapleBack - all components are made with kiln dried WHAD mapleArm - all arm parts are of kiln dried european beechAssembly- joints on seat, back and arms are assembled using dowels, mortise and tenons, blocks, glue and #8 screws/ #10 screwsFoam Seat- all foam is premium grade and CAL 117 certified fire retardantBack- all foam is premium grade and CAL 117 certified fire retardantSuspension System LEXUS webbingpolypropylene/latex/rubber2430 Propex (applied to backs)100% polypropylenelatex coating is paranol acrylic 763applied with 5/16 stainless steel staplesSeat Pan and Travel Mechanism Seat Pan is of 7 Ga. thick welded steelFinishing Process The Euroluxe finish is a chemically re-engineered Urethane clear coat that preserves the beautiful depth and clarity of OFS Brands’ finishes, but allows for much greater performance with chemical and scratch resistance, as well as the complete elimination of dangerous formaldehyde emissions.-12065-33337500SilverBan? technology is the next generation of antimicrobials utilizing silver ions infused into the Euroluxe? wood finish for anti-microbial protection on all exposed wood surfaces. SilverBan? inhibits the growth of mold, mildew, fungus and bacteria on wood surfaces, as well as odors caused by bacterial growth, by 99.99%.-12065-32004000SilverBan? is standard on all exposed wood products from Carolina.GlidesAdjustable with brown or non-marking finish as specifiedCarton and Packaging Prior to shipping the unit is placed on a carton base tray, and then it is covered with plastic. Instapak, environmentally responsible expandable foam, is used to secure the furniture in the carton. The carton and tray are then strapped together finalizing the package.All drawer glide suspensions — lifetimeAll locking mechanisms — lifetimeAll door hinges — 12 yearsDoor Latches — 12 yearsDrawer Pulls — 12 yearsOverall Dimensions25"w 27.5"d 34"hShipping Weight40 lbs.Seat Dimensions21"w 19"d 18"hCubic Feet19Seat to Top of Back16.5"Exposed Woodeuropean beechTop of Arm to Floor25.5"4709795-58293000Waiting Room Loveseat Carolina Orchestra or Equal Estimated Quantity: 2Frame Construction:Clean ThruDesignUpholstered Arms, Seat and Back Tight Cushion Wall-Saver Design Removable European Beech Curved and Tapered Legs Non-Marring adjustable Glides Seat-plywood seat EZ frameseat kiln dried WHAD mapleBack - all components are made with kiln dried WHAD mapleArm - all arm parts are of kiln dried european beechAssembly- joints on seat, back and arms are assembled using dowels, mortise and tenons, blocks, glue and #8 screws/ #10 screwsFoam Seat- all foam is premium grade and CAL 117 certified fire retardantBack- all foam is premium grade and CAL 117 certified fire retardantSuspension System Embedded coil springs 100% Polyester with Tensis Strength of 200lbs. per inch ECOS clips High loop springs 100% Polypropylene Polypropylene/latex/rubber webbing Arms and back - applied with 5/16 stainless steel staples SeatPremium grade UCCalifornia compliant 2.5 lb density, 25 compression Back: Premium grade UCCalifornia compliant 1.8 lb density, 20 compressionsSeat Pan and Travel Mechanism Seat Pan is of 7 Ga. thick welded steelFinishing Process The Euroluxe finish is a chemically re-engineered Urethane clear coat that preserves the beautiful depth and clarity of OFS Brands’ finishes, but allows for much greater performance with chemical and scratch resistance, as well as the complete elimination of dangerous formaldehyde emissions.-12065-33337500SilverBan? technology is the next generation of antimicrobials utilizing silver ions infused into the Euroluxe? wood finish for anti-microbial protection on all exposed wood surfaces. SilverBan? inhibits the growth of mold, mildew, fungus and bacteria on wood surfaces, as well as odors caused by bacterial growth, by 99.99%.-12065-32004000SilverBan? is standard on all exposed wood products from Carolina.GlidesAdjustable with brown or non-marking finish as specifiedCarton and Packaging Prior to shipping the unit is placed on a carton base tray, then it is covered with plastic. Instapak, environmentally responsible expandable foam, is used to secure the furniture in the carton. The carton and tray are then strapped together finalizing the package.All drawer glide suspensions — lifetimeAll locking mechanisms — lifetimeAll door hinges — 12 yearsDoor Latches — 12 yearsDrawer Pulls — 12 years49510953556000Overall Dimensions53.5"w x 32"d x 36.5"hCOM 54"7 yds.Seat Dimensions47"w x 19"d x 19.5"hShipping Weight95 lbs.Seat to Top of Back21"Cubic Feet44Top of Arm to Floor25"Exposed WoodEuropean BeechWaiting Room Lounge Chair Carolina Orchestra or Equal Estimated Quantity: 8Clean ThruDesignUpholstered Arms, Seat and Back Tight Cushion Wall-Saver Design Removable European Beech Curved and Tapered Legs Non-Marring adjustable Glides Foam Seat- all foam is premium grade and CAL 117 certified fire retardantBack- all foam is premium grade and CAL 117 certified fire retardantSuspension System Embedded coil springs 100% Polyester with Tensis Strength of 200lbs. per inch ECOS clips High loop springs 100% Polypropylene Polypropylene/latex/rubber webbing Arms and back - applied with 5/16 stainless steel staples SeatPremium grade UCCalifornia compliant 2.5 lb density, 25 compression Back: Premium grade UCCalifornia compliant 1.8 lb density, 20 compression Seat Pan and Travel Mechanism Seat Pan is of 7 Ga. thick welded steelFinishing Process The Euroluxe finish is a chemically re-engineered Urethane clear coat that preserves the beautiful depth and clarity of OFS Brands’ finishes, but allows for much greater performance with chemical and scratch resistance, as well as the complete elimination of dangerous formaldehyde emissions.-12065-33337500SilverBan? technology is the next generation of antimicrobials utilizing silver ions infused into the Euroluxe? wood finish for anti-microbial protection on all exposed wood surfaces. SilverBan? inhibits the growth of mold, mildew, fungus and bacteria on wood surfaces, as well as odors caused by bacterial growth, by 99.99%.-12065-32004000SilverBan? is standard on all exposed wood products from Carolina.GlidesAdjustable with brown or non-marking finish as specifiedCarton and Packaging Prior to shipping the unit is placed on a carton base tray, then it is covered with plastic. Instapak, environmentally responsible expandable foam, is used to secure the furniture in the carton. The carton and tray are then strapped together finalizing the package.Overall Dimensions29.5"w x 32"d x 36.5"hCOM 54"5 yds.Seat Dimensions23"w x 19"d x 19.5"hShipping Weight65 lbs.Seat to Top of Back21"Cubic Feet27Top of Arm to Floor25"Exposed WoodEuropean Beech5179060-46355000 Waiting Room Endtables Carolina Basket or Equal Estimated Quantity: 4BASKET STANDARD FEATURESStainless Steel BaseNon-Marring Adjustable GlidesEuroluxe? with SilverBan? on all Exposed Wood as specified Eased Knife edge detail on tops HPL top with Lumberband Edge ITEM NUMBERDESCRIPTION OF SUPPLIES/SERVICESQUANTITYUNITUNIT PRICEAMOUNT0001Guest Chair 4.00EA____________________________________000236" round top table 3.00EA____________________________________000324" Round end table 4.00EA____________________________________0004Loveseat 2.00EA____________________________________0005Lounge chair 8.00EA____________________________________0006L-Shaped Desks with keyboard tray, tack board, task light, locking overhead storage, tool rail, paper management , and monitor arms 4.00EA____________________________________0007Workstation with keyboard tray, tack board, task light, locking overhead storage, tool rail, paper management , and monitor arms 13.00EA____________________________________000830" round top table 1.00EA____________________________________00094 High Lateral File 2.00EA____________________________________0010Side Chair 26.00EA____________________________________0011Trendelenburg Recliner, wide 1.00EA____________________________________0012Trendelenburg Recliner 19.00EA____________________________________0013Sleep Sofa w/ table, 72" sleep surface 20.00EA____________________________________0014Folding Chair, upholstered seat and back, finished wood backside, stacking, with mounting rail 40.00EA____________________________________0015Patient overbed tablew/tray 24.00EA____________________________________0016Patient bedside cabinet w/lock and drawer liner 24.00EA____________________________________0017Nesting Tables 4.00EA____________________________________0018DELIVERY AND INSTALLATION CHARGES 1.00EA____________________________________GRAND TOTAL__________________ ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download