Load Centers & Circuit Breakers 1 - Siemens

Load Centers & Circuit Breakers

SPEEDFAXTM 2017

1Section

LOAD CENTERS &

1 CIRCUIT BREAKERS

PL Series Load Center

Generator Ready

Load Center

WireGuide Load Center

Scan to connect online to the most up-todate version of this Section of SPEEDFAX. (Section was last modified on 03/18/19)

Contents

Load Centers

Catalog Numbering System

1-2

Siemens PL and ES Series Load CentersTM Introduction

1-3

WireGuideTM Load Centers and Breakers

1-3

PL Series Load Centers Features and Product Offering

1-4 ? 1-5

PL Series Single Phase Main Lug & Main Breaker Load Centers

1-6

PL Series Single Phase Special Load Centers

1-7

PL Series Three Phase Main Lug & Main Breaker Load Centers

1-8

PL Series Three Phase Unassembled Load Centers

1-9

ES Series Load Centers Features and Product Offering

1-10 ? 1-11

ES Series Single Phase Main Lug & Main Breaker Load Centers

1-12

ES Series Single Phase Special Load Centers

1-14

ES Series Three Phase Main Lug & Main Breaker Load Centers

1-15

EQ? Load Centers, 300-400 Amp

1-16

Generator Ready Load Centers

1-17

Riser Panel Load Centers

1-18

EQ? Load Centers, Small Circuit and Circuit Breaker Enclosures 1-19 ? 1-20

Renovation Interiors

1-21

Load Centers OEM Interiors and Accessories

1-22 ? 1-25

Standby Power Systems

1-26 ? 1-27

Knockout Diagrams

1-28 ? 1-32

Load Center Cross Reference

1-33 ? 1-34

Circuit Breakers Arc-Fault and Ground-Fault Breakers Dual Arc-Fault and Ground-Fault Breakers Type QP, 1" Breakers Duplex, Triplex and Quadplex Plug-In Breakers Special Application Breakers Type QD, 3/4" Breakers Main and Branch Circuit Breakers Circuit Breaker Dimension Drawings and Lug Data Circuit Breaker Accessories

1-35 1-36 1-37 1-38 1-39 1-40 1-41 1-42 ? 1-43 1-44 ? 1-45

Surge Protection Products

1-46 ? 1-48

AC Disconnects, 1-Phase, NEMA 3R Rated

1-49

Murray Load Centers Main Lug Only and Main Breaker Accessories Catalog Logic Cross References and Knockout Drawings

1-50 ? 1-56 1-50 ? 1-51

1-52 1-53 1-54 ? 1-56

Murray Circuit Breakers Arc-Fault Interrupters (AFCI) 1" Plug-in Circuit Breaker and Surge Protective Device (SPD) Special Application Breakers Type MSQ, 3/4 Inch Plug-In Breakers Main and Branch Circuit Breakers Accessories Line Diagrams and Lug Data

1-57 ? 1-67 1-57

1-58 ? 1-59 1-60 1-61 1-62 1-63

1-64 ? 1-65 1-66 ? 1-67

Siemens Industry, Inc. SPEEDFAXTM 2017 Product Catalog 1-1

Load Centers

Catalog Numbering System

LOAD CENTERS & 1

CIRCUIT BREAKERS

Catalog Numbering System

P 12 24

B

Type Enclosure or Component

E = Indoor Type 1 2-10 and 30-42 circuits 300-400Amp G = Indoor Type 1 12-42 circuits W = Outdoor Type 3R I or PI = Interior R = Riser P = PL Series Indoor Type 1 12-70 circuits S = ES Series Indoor Type 1 12-70 circuits PW = PL Series Outdoor Type 3R 12-70 circuits SW = ES Series Outdoor Type 3R 12-70 circuits

Spaces

Maximum number of 1" breakers

Circuits

Maximum number of circuits

Type of Main

ML or L = Main Lug

MB or B = Main Breaker

System

1 = 1-Phase, 3-Wire 3 = 3-Phase, 3-Wire or 3-Phase, 4-Wire

Main Ampere Rating

Ex:100 = 100 Amps

Interior

Blank A

= Standard = Wireguide

Trim / Others

Blank = Combination

S

= Surface

F

= Flush

T

= Feed-Thru Lugs

G or GB = Ground Bar Factory Installed

Type of Bus Bar

Blank = Aluminum

C or CU = Copper

P

= Aluminum Bus, Value Pack

Trim Color

Blank = Grey

W

= White

Products Shown In Sections 1 of this Speedfax Meet or Exceed the Following Standards. n UL50 -- Electric Cabinets and Boxes

n UL67 -- Electric Panelboards

n UL486 -- Wire Connectors

n UL489 -- Molded-Case Circuit Breakers

n UL869 -- Service Equipment

nUL943 -- Ground Fault interrupters (Class A -- Personnel Protection)

n Federal Specification W-P-115b -- Panel Power Distribution

n Federal Specification W-C-375B -- Circuit Breakers

n NEC

n NEMA 250

Underwriters' Laboratories, Inc. Reference File Numbers:

n Series Connected Circuit Breaker Information is recognized by UL under file #E10848(N)

n Load Centers Listed by UL under file #E10703

n Load Centers UL recognized components found under file #E10703, Volume 6 and 7. (Also referenced under the recognized components directory -- section QEUY2)

n EQ Circuit Breakers are Listed by UL under file #E82615

1 100 A S CU W

1-2

Siemens Industry, Inc. SPEEDFAXTM 2017 Product Catalog

LOAD CENTERS &

1 CIRCUIT BREAKERS

Load Centers

Siemens PL and ES Series Load CentersTM Overview

PL Series:

n Convertible n Invertiblea n Flush or Surface Mount Combination Covera n Insta-wire neutrals & grounds n Ground bars included n Copper busbars n Dual neutrals on all configurations n Carton-in-carton packaging n Lifetime warranty

Revised on 03/31/19

ES Series:

n Invertiblea n Flush or Surface Mount Combination Covera n Insta-wire neutrals & grounds n Aluminum busbars n Single sided neutral on 24 circuits

and below n Single piece carton packaging n 10 year warranty

PL Series 1-phase

PL Series 3-phase

ES Series 1-phase

ES Series 3-phase

NEW WireGuideTM Load Centers and Breakers

WireGuide load centers accept new AFCIs with shortened neutral wires that slide directly into the neutral bar.

Features

n Over 4 inches of breaker wire bending space n 11 SKUs each available in both grey and whitea n Pre-trimmed and ready to install neutral wires have an

"Oops Loop" if extra wire is needed n Full length neutral bars n Decreased installation time n WireGuide breakers available by adding "WG" suffix to

existing catalog numbers. See page 1-35 for more details.

a Applies only to NEMA 1 ES and PL Load Centers

WireGuide Load Centers

Combination Type AFCI WireGuide Breaker

Siemens Industry, Inc. SPEEDFAXTM 2017 Product Catalog 1-3

LOAD CENTERS & 1

CIRCUIT BREAKERS

PL Series Load Centers

Features

Invertible for bottom feed application.a

All devices are provided with 2 factory

installed ground bars.

Combination head screw on

the neutrals, ground, trim,

upper pan, and bond

screw provide installation flexibility.

A rigid, sturdy base pan

provides the ruggedness

required for the

most harsh applications.

Copper Bus

Revised on 03/02/17

All devices convertible from main lug to main breaker and vice versa.

Mounting tabs on the trim hold it in place on the load center, freeing up both hands to drive the trim screws.

The prepositioned bond screw eliminates bond strap/ screw assemblies, and reduces the risk of losing components in the field.

The patented INSTA-WIRETM neutral/ground system allows for faster installation because screws are backed out, ready for wire insertion. The visible neutral and grounds system aids in the insertion of conductors.

PL Series Load Centers ship with trims packaged separately.

The outdoor enclosure has a slide hinge door for the easiest installation and can be removed by backing out only one screw.

a Applies only to NEMA 1 ES and PL Load Centers

1-4

Siemens Industry, Inc. SPEEDFAXTM 2017 Product Catalog

LOAD CENTERS &

1 CIRCUIT BREAKERS

PL Series Load Centers

Product Offering

The PL Series Load Center product line provides a wide array of variation to meet any application need.

The following offering is available in the PL Series product line: n 12-70 Circuits/Spaces n Indoor and Outdoor enclosures n 100 to 225 Amp n Main Lug and Main Breakers n Un-assembled offering in 3-phase

PL Series 1-phase Main Lug

Product Category RESI

PL Series 3-phase Main Breaker

Un-assembled 3-phase

Siemens Industry, Inc. SPEEDFAXTM 2017 Product Catalog 1-5

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download