H2 Series Ionizer Manual FINAL 12.22 - Alkaline Water Plus

Owner's Manual

H2 Series

Vesta H2, Athena H2, and Melody II Only from AlkaViva

Warning: Incorrect installation and/or operation could void your valuable warranty. Please protect your investment! READ THIS MANUAL CAREFULLY.

H2 SERIES ALKALINE WATER IONIZER AND HYDROGEN GENERATOR

TABLE OF CONTENTS

Congratulations on Your New Purchase ................................................... 03 Important Safety Warnings and Precautions ........................................... 04 Let's Take a Tour of Your H2 Series Ionizer.................................................. 06 Installation Procedure ....................................................................................... 08 Operating Your Ionizer ..................................................................................... 11 Manually Adjusting the Power ....................................................................... 13 Ionizer Performance Factors .......................................................................... 14 Using Ionized Water .......................................................................................... 15 How To Replace the Filters .............................................................................. 18 Using the Cleaning Filters ............................................................................... 20 Troubleshooting Guide .................................................................................... 21

2

H2 SERIES ALKALINE WATER IONIZER AND HYDROGEN GENERATOR

Congratulations on Your New Purchase

Congratulations! You have just purchased the H2 Series alkaline water ionizer and hydrogen generator. Your new H2 Series Ionizer is designed to provide you with many years of the cleanest, healthiest and most functional water available. There are many speci c uses and bene ts of this amazing water, so read this manual carefully to learn how to install, maintain, protect and get optimum performance out of your investment. Your new H2 Series Ionizer produces ltered alkaline, ionized, and hydrogen-rich water. Just exactly what is that? Your ionizer employs computer accurate and selectable magnetic energy to perform electrolysis through platinum titanium electrodes inside a water cell. Inside this advanced cell, the magnetic energy separates the water into alkaline (high pH) and acid (low pH) stream and enriches the water with dissolved molecular hydrogen (H2) without using any chemicals. Ionizing the water also binds extra oxygen molecules, and concentrates ionized, absorbable and bene cial minerals like calcium, magnesium and potassium. Your new H2 series Ionizer also produces acidic water. This type of water has a low pH (less than pH 6) and has many excellent uses. You will now have the convenience and bene ts of water that functions in many ways that ordinary tap, ltered or bottled water cannot.

3

H2 SERIES ALKALINE WATER IONIZER AND HYDROGEN GENERATOR

1 Important Safety Warnings and Precautions

Electrical Precautions and Safeguards

This appliance must be grounded. In the event of a malfunction or breakdown, ground will reduce the risk of electric shock by providing a path of least resistance for electrical current. This appliance is equipped with a cord having an appliance grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances. NEVER attempt to repair or service the unit yourself. Attempting to do so will void your valuable warranty! Contact AlkaViva Customer Service to arrange service or repair.

If your ionizer becomes submerged in water, unplug the power cord from the wall before removing the ionizer from the water. Failure to do so may cause electric shock! Do not use your ionizer at voltages other than speci ed (AC 110-120V). Use a grounded outlet. Do not plug in your ionizer where it will exceed the rating of the outlet or electrical wiring. Failure to do so can result in re, injury and/or damage to your wiring, your ionizer, or yourself! NEVER touch the power cord or plug with wet hands - this may result in electric shock!

Do not wash your ionizer by immersion or by pouring water over the main body; always unplug your ionizer while cleaning the casing. Clean with damp sponge or cloth.

Ensure the power plug is rmly and properly inserted into the outlet - failure to do so may result in electric shock or re!

Keep the power cord and your ionizer away from hot surfaces or appliances - failure to do so may result in electric shock or re!

Do not operate your ionizer with a damaged power cord or plug or insert into a faulty or worn outlet.

Never insert foreign objects into your ionizer.

Always unplug your ionizer when changing a fuse or cleaning your ionizer. Failure to do so may result in an electric shock!

4

H2 SERIES ALKALINE WATER IONIZER

AND HYDROGEN GENERATOR

2 Let's Take A Tour of Your NEW H2 Series Ionizer!

Front View

Rear View

3

4

9

4

2

5

5

1

6 13

12

11

9

6

10

Bottom View

Tap Water Inlet

8

Diverter

14

14 7

Hose(1/4")

Acidic Water Outlet

#

Name

Description

1

Back Panel

Covers the back of the ionizer.

2

Control Panel

Function controls and display. Detailed on next page.

3 Flexible Stainless Steel Spout Outlet for either alkaline or acidic water (user-selected).

4

Front Panel

Covers the front of the ionizer.

5

Filter Cover

Remove this panel to change lters.

6

Bottom Panel

Covers bottom of the ionizer.

7

Acidic Water Outlet

For acidic water. Labeled with red sticker.

8

Water Inlet

Tap water supply. Labeled with black sticker.

9

Key-hole Slots

For wall mounting.

10

Fuse Holder

Fuse.

11

Audio Speaker

Transmits voice and melody.

12 Audio Volume Control

Volume control.

13

Flow Control Valve

On/O and water ow adjustment.

14

Locking Device

Filter cover safety lock. Depress when removing lter cover.

5

Control Panel

Alkaline Water Indicator

Illuminates when alkaline water is selected.

Filter Life Indicator

1st and 2nd lter indication.

Error Code Indicator

Shows error codes for trouble shooting with AlkaViva Customer Service.

Alkaline Water Selection Buttons

Select Alkaline Water. (Alkaline 1,2,3,4 and Alkaline 5)

Acidic Water Indicator

Illuminates when acidic water is selected.

H2 SERIES ALKALINE WATER IONIZER

AND HYDROGEN GENERATOR

Filtered Water Indicator

Illuminates when ltered water is

selected.

Water Flow Indicator High

H range illuminates to indicate maximal ow. (Lower performance.)

Normal

Normal range illuminates to indicate optimal ow. (Normal performance.)

Low

L range illuminates to indicate low ow. (Best performance - water may taste unpalatable.)

Filtered Water Selection Button

Select Filtered Water only.

Acidic Water Selection Buttons

Select Acidic Water. (Acidic 1, Acidic 2)

6

3 Installation Procedure

Installation Precautions

H2 SERIES ALKALINE WATER IONIZER

AND HYDROGEN GENERATOR

Protect your ionizer from freezing temperatures.

Do not put anything heavy on top of your ionizer.

Protect your ionizer from direct sunlight. Install only on a hard and level surface.

Do not install your ionizer on an unstable or soft surface. Do not install close to a stove.

Install close to a properly grounded electrical outlet.

Do not close, bend, pinch, press or otherwise obstruct hoses.

If you have installation questions, please call AlkaViva Customer Service.

Installation Options

Install Method 1: At your sink attached to your faucet with the diverter, Install Method 2: At your sink but plumbed directly to your cold water line (no diverter) and, Install Method 3: Under-sink - completely out of sight with a small dedicated faucet. It is recommended that Methods 2 and 3 be done by a plumber.

Make Sure You Have All the Accessories

Before installation, please check to ensure you have the accessories pictured below.

Please note that the diverter and adapters accommodate the vast majority of standard faucets. The angle-stop adapter ts both 1/2" and 3/8" standard plumbing. If you have a non-standard or a custom faucet, or plumbing, you may need to locate and purchase additional parts. If you need help, please contact AlkaViva Customer Service.

In-line Sediment Filter

Complete Installation Package

Angle Stop Adapter

pH Test Reagent

Calcium & Scale Guard Inserts - 1 of each

NOTE The sediment lter is an optional accessory that will further protect your ionizer and lengthen the life of your lters. It is installed in the 1/4" white tap water inlet hose before it enters your ionizer in any of the three installation methods. It can be opened and cleaned as needed.

7

H2 SERIES ALKALINE WATER IONIZER

AND HYDROGEN GENERATOR

Install Method 1: At the sink with a diverter (easiest)

Tools You May Need: ? Standard pliers or channel locks ? A sharp knife or a good pair of kitchen scissors

1/4" White Hose to Tap Water Inlet Port Fig. 1

1. ATTACH DIVERTER TO YOUR TAP - Remove the aerator from tap (pliers may be required) and attach diverter valve in its place. There are adapters supplied in case the diverter does not t your tap. If you have leaks at the diverter, use plumber's Te on tape (included).

2. ATTACH THE 1/4" WHITE TAP WATER INLET HOSE (Fig. 1) - Attach the white 1/4" hose to the white port on the bottom of the ionizer labeled TAP WATER INLET. To attach the white hose, simply push it rmly into the opening on white port. Give it a gentle tug to ensure proper connection. If it is properly installed, it will not come out. If you need to remove it, press on the ring at the end of the tting while pulling out.

3. ATTACH THE GRAY ACIDIC WATER OUTLET HOSE (Fig. 2) - Attach the gray hose to the white plastic port labeled ACIDIC WATER OUTLET on the bottom of the ionizer. First, slide a squeeze clamp over the end of the hose. Attach the gray hose by simply pushing it rmly over the white plastic port. Soaking it in hot water for 30 seconds will make attaching it very easy. Squeeze the clamp and position it over the white port. Ensure the opposite end runs into the sink.

4. POSITION YOUR IONIZER - Ensure it is on a hard and level surface. See installation precautions.

Gray Hose To Acidic Water Outlet Port Fig. 2

Attach 1/4" White Hose to Diverter

Fig. 3

5. ATTACH THE 1/4" WHITE HOSE TO THE DIVERTER (Fig. 3) - Measure the appropriate length of white hose, allowing for a reasonable amount of slack, and cut using sharp knife or scissors. Remove the small compression nut on the back of the diverter (opposite of the lever). Slide the nut over the opposite (free) end of the white 1/4" hose with the threads positioned so it will screw onto the diverter. Push the hose rmly onto the nipple, then screw the compression nut back on. Ensure the nut is tightened rmly. Do not over tighten.

6. CONNECT THE POWER CORD - Use an appropriate grounded outlet.

7. INSTALL FLEXIBLE STAINLESS STEEL SPOUT - Screw the spout clockwise into the threaded silver port on top of the ionizer. Do not over tighten.

8. SAVE THE BOX your ionizer came packed in. This will help if your ionizer

needs to be transported at a later date.

Fig. 3

8

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download