Dismantling, Cleaning, and Inspecting an Engine



Using Measuring Tools Name ______________________________ X107

PROCEDURE:

1. Read the unit “Micrometers” and be prepared to be tested on using and reading a micrometer.

CHECK POINT ________

2. Read the “Small hole gauges” section in the unit “Micrometers”, and prepare to be tested on using a small hole gauge.

CHECK POINT ________

2. Read the “Telescoping gauges” section in the unit “Micrometers”, and prepare to be tested on using a telescoping gauge.

CHECK POINT ________

3. Use the black and red “Briggs & Stratton” repair manual (with the white coil on the side) for your engine and locate specifications and directions for evaluating the condition of the following parts:

a. Valves Tappet Clearance

• Procedure: Section# _____ pg# _____

• Specification Table or Chart #_____ Section# _____ pg# _____

b. Piston Ring End Gaps

• Procedure: Section# _____ pg# _____

• Specification Table or Chart #_____ Section# _____ pg# _____

c. Crankshaft End Play

• Procedure: Section# _____ pg# _____

• Specification Table or Chart# _____ Section# _____ pg# _____

CHECK POINT ________

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download