Can't access the BootCamp control panel on my Windows …

Can't access the BootCamp control panel on my Windows System. If you see the error message asking you to check your administrative privileges, please try the following steps to troubleshoot

1. Open cmd.exe 2. Type runas /trustlevel:0x20000 "C:\Windows\System32\AppleControlPanel.exe".

3. BootCamp panel will pop up after step 2.

Thunderbolt device can't be read after using BootCamp to install Windows System. Please check which year your Mac was manufactured. You can find out by checking via About your Mac/ Overview. Thunderbolt hot plug is supported under Windows system on all 2014 and later Mac computers. For all other Mac computers, Windows system scans and activates Thunderbolt devices connected to Thunderbolt ports only during the Windows startup process.

If your device was not plugged in at start up, Windows will not detect it without a restart. I use Disk Utility to restore my Mac system but it occurs an error Osstatus error 22. This problem has happened since Mac 10.13.4 released. Even you use Apple original SSD, same problem will occur as well. We've replied this issue to Apple Inc. For possible alternatives are using Time Machine and Third-Party Software.

Error Message shows not enough disk space during using Boot Camp This error could be related to APFS. Time Machine will produce lots snapshot files during automatic backup. Need to use Terminal to delete the files one by one.

Search commandtmutil listlocalsnapshots / This command will show all snapshots files, as below. com.apple.TimeMachine.2018-04-30-021643

Delete commandtmutil deletelocalsnapshots snapshot_filename

Here, the filename needs to type like 2018-04-30-021643.

After cloning Mac OS (High Sierra), I can't log in with original password. Please try decrypt FileVault.

1. Choose Apple menu > System Preferences, then click Security & Privacy. 2. Click the FileVault tab. 3. Click Locked, then enter an administrator name and password. 4. Click Turn Off FileVault. The decryption will take long period of time which depends on how much capacity you used.

Why is the performance of my JDM820/825 lower than specified? Please try downloading Transcend's JetDrive ToolBox. (Download) After the download, check whether your JDM820/825 is currently running at the latest firmware version, and if not, update it to the lastest version.*We strongly suggest you backup your data before updating the firmware to prevent data loss.

When I try to restore my MacBook Air/Pro, an error message "Couldn't get target recovery partition information" appears. Please try unmounting your SSD before clicking on the "Restore" button.

Why do I get an error message when using bootcamp partitioning in High Sierra? This error could be caused by Time Machine. Please try the following steps. 1. Go to "System Preferences > Time machine" turn off "automatic backup" 2. Turn on the terminal 3. Input command: "tmutil thinlocalsnapshots / 9999999999999999" 4. Reboot5. re-run the disk partitioning or Boot Camp

My newly installed JetDrive cannot be detected in Mac's Disk Utility. Please try the methods below. Method 1: Select "Show every partition" from the menu in the upper left corner in Disk Utility. Then restart Disk Utility.

Method 2: After JetDrive is formatted, you will see JetDrive in Disk Utility.

1. Open the terminal

2. Check JetDrive's disk number (for example: /dev/disk0 ) and enter the command "diskutil list".

3. Format JetDrive. Enter the command "diskutil eraseDisk JHFS+ TRANSCEND /dev/disk0"

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download