Testing and Inspection

[Pages:2]ALLDATA Online - 2003 Honda Truck Odyssey V6-3.5L - Testing and Inspection

Page 1 of 2

Home | Account | Contact ALLDATA | Log Out | Help

Select Vehicle | New TSBs | Technician's Reference Component Search:

2003 Honda Truck Odyssey V6-3.5L Vehicle Level Lighting and Horns Horn Switch Testing and Inspection

Testing and Inspection

Horn Switch Test 1. Remove the dashboard lower cover. 2. Remove the steering column upper and lower covers.

PAUL REDEHOFT OK

Conversion Calculator

Notes

Zoom

Sized for Print

3. Disconnect the dashboard wire harness B 4P connector (A) from the cable reel (B).

4. Check for continuity between the cable reel No.2 terminal and body ground in each switch position.

There should be continuity when the horn switch is pushed. There should be no continuity when the horn switch is released. If both continuity checks are OK, the horn switch is OK. If neither check is OK, go to step 5.

5. Remove the driver's airbag assembly.

... 3/5/2010

ALLDATA Online - 2003 Honda Truck Odyssey V6-3.5L - Testing and Inspection

Page 2 of 2

Zoom

Sized for Print

6. Check for continuity between the cable reel No.2 terminal (A) and the horn switch positive terminal (B).

If there is no continuity, check the cruise control Set/Resume/Cancel switch. If the switch is OK, replace the cable reel and check for the proper operation. If there is continuity, replace the driver's airbag.

? 2010 ALLDATA LLC. All rights reserved.

Terms of Use

... 3/5/2010

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download