Austin Community College District



MASTER COURSE SYLLABUS

SMER 1413

MARINE ELECTRICAL SYSTEMS

COURSE DESRCIPTION:

Theory of operation and test procedures and equipment used in the diagnosis and repair of the various circuits which make up an outboard motor electrical system.

PREREQUISITES: None

Instructional Methodology:

Using a combination of computer, video, and lecture, plus faculty demonstration, student will practice towards mastery of all listed tasks.

TEXTS AND REFERENCES USED:

1. UNDERSTANDING THE OUTBOARD MOTOR (Eugene Stagner) (ISBN 0-13-094318-5)

2. Manufacturer's service manuals.

3. Selected films and charts from various sources.

4. Books can be found in the RVS bookstore located downstairs in Bldg. G

CLASS AND LAB REQUIREMENTS:

1. Regular attendance is required. Only limited absences and tardiness will be accepted if a grade better than a "D" is expected. *(1C-1, 4, 2A-4)

2. Students are required to maintain a "C" average, or a grade point average of 2.00. This means that the average of all classes must be a "C" in order to obtain either a certificate of completion, or degree. Students who either arrive late for class, leave early, and/or bring no tools cannot expect to complete lab assignments in a timely manner and receive a grade better than "D". For further information see the sections on "graduation" and "Academic Suspension" in the administration Information area of the current ACC Catalog. *(1A-1, 1C-1,2,4,5, 2A-4)

1. Each student will have his/her own tools available for shop work at the beginning of each class period. Loaning or borrowing of tools between students is discouraged. Specialty tools, tools not on the student tool list, are available from the Tool Room. . Proper safety glasses, shoes and clothes must be worn in the lab areas. Flip flops, loose baggy clothing or clothing that is too revealing in nature that is distracting to other students are all are unsafe for the shop environment.

GRADING:

1. Lab activities will constitute 70% and tests will make up 30% of total grade.

2. Homework assignments and pop quizzes will be given. A student will not be given a passing grade, "D", without 100 per cent participation in pop quizzes and completion of homework assignments. *(1A-4, 1C-1, 2A-4)

3. A passing grade, "D", will not be awarded to any student who has not achieved an average letter grade of "C" or higher on exams.

4. A positive constructive attitude also plays an important part in the overall evaluation of the shop work and will be directly related to the shop grade. *(1C-1,2,4,5, 2A-4)

5. Any withdrawals are the responsibility of the student. If the student fails to make the withdrawal by the drop date, an automatic grade of "F" will be awarded. *(1C-1,4, 2A-4)

PROJECTS FOR SHOP WORK:

Although projects are always needed for shop, whose project and which project is worked on first is not considered an important part of the course. All projects being worked on in the shop must first be approved by the instructor. Even though emergencies occur with equipment breaking down, we are not here to schedule work as a garage would. Time schedules will not be considered or given as related to repair work of any given project. Only work related to the course will be considered. No work will be performed on any equipment if the subject has not first been covered in the classroom.

CARE AND CLEANING OF TOOLS, EQUIPMENT AND SHOP AREA (including class room)

All students will be expected to participate in shop and classroom cleanup at the end of each class period. Ample time will be allotted by the instructor for this purpose. All tools will be cleaned and put in the proper place before class will be dismissed. *(1A-4, 2B-1, and 2A-2)

SCANS SKILLS

Listed below and identified * with activities throughout this syllabus are the generalized Scans Skills. A complete explanation of these headings is found in the GUIDELINES FOR INSTRUCTIONAL PROGRAMS IN WORKFORCE EDUCATION by the Texas Coordinating Board.

1. FOUNDATION SKILLS:

A. BASIC SKILLS:

a) Reading

b) Writing

c) Arithmetic and Mathematical Operations

d) Listening

e) Speaking

B. THINKING SKILLS:

a) Creative Thinking

b) Decision Making

c) Problem Solving

d) Visualize

e) Reasoning

C. PERSONAL QUALITIES:

a) Responsibility

b) Self-Esteem

c) Sociability

d) Self-Management

e) Integrity and Honesty

2. WORKPLACE COMPETENCIES:

A. RESOURCES:

a) Time

b) Money

c) Material and Facilities

d) Human resources

B. INTERPERSONAL SKILLS:

a) Participate and Member of a Team

b) Teach Others New Skills

c) Serve Clients/Customers

d) Exercise Leadership

e) Negotiate

f) Work with Diversity

C. INFORMATION:

a) Acquire and Evaluate Information

b) Organize and Maintain Information

c) Interpret and Communicate Information

d) Use Computers to Process Information

D. SYSTEMS:

a) Understand Systems

b) Monitor and Correct Performance

c) Improve or Design Systems

E. TECHNOLOGY:

a) Select Technology

b) Apply Technologies to Task

c) Maintain and Troubleshoot Equipment

SCANS SKILLS AND OTHER NOTATIONS

Notated and identified * with activities throughout this syllabus are the generalized Scans Skills. A complete explanation of these headings is found in the GUIDELINES FOR INSTRUCTIONAL PROGRAMS IN WORKFORCE EDUCATION by the Texas Coordinating Board.

1. Orientation/Work Safety

a. Hand tool safety

b. Power tool safety

c. Fire extinguishers

d. Proper housekeeping

e. Hazardous materials

2. Tool Identification & Operation

a. Sockets

b. Wrenches

c. Pliers

d. Screw drivers

e. Hammers

f. Punches

g. Pullers

h. Ring compressors

i. Valve spring compressors

j. Piston ring compressors

3. Fasteners, Sealants and Gasket Identification & Use

a. Bolts & Nut Terminology

b. Cotter, Clevis, Rolled, Taper & other types of pins

c. Adhesives, sealers & gasket makers

4. Precision measuring instruments. Identification & use

a. Micrometers

b. Depth gauge

c. Digital and dial calipers

d. Telescoping gauges

e. Small hole gauges

f. Bore gauge

g. Torque wrenches

5. Engine & OEM Equipment Identification

a. Manufacture brand

b. Model numbers

c. Serial number

d. Type number

6. Customer Service

a. Diagnosing equipment problems with customer

b. Work orders

7. Electrical theory

a. Atoms and electricity

b. Direct & alternating current

c. Ohms law

d. Electrical units of measurement

e. Series and parallel circuits

f. Magnetism and electricity

8. Marine battery

a. Construction

b. Rating/MCA

c. Types, configurations

d. Battery switches, isolators, onboard chargers

e. Charging and testing

f. Installation and maintenance

8. Starter circuit and motor operation

a. Components

b. Control circuit

c. Starter motor and solenoid operation

d. Testing of starter

e. Manual starter operation

9. Charging circuit and operation

a. Components

b. Electromagnetic induction

c. System circuitry

d. Rectification a/c – d/c

e. Test, output, voltage

10. Ignition system operation

a. Primary ignition circuit

b. Secondary ignition circuit

c. TCI and CDI ignitions

d. Breaker type and battery type ignition

e. Function of SCR and diodes

f. Charge coil, trigger circuits

g. Testing

11. Marine wiring, identification. Diagnosis and repair

a. Marine wiring color code

b. Marine electrical systems

c. Wiring repair, harness repair and fabrication

d. Rigging and installation

e. diagnosis

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download