ZT10 Quick Reference Guide - ZoomText



ZoomTextFusionQuick Reference Guideversion10.1 XE "legal:Copyrights" Copyrights ZoomText Fusion Copyright ? 2016, Algorithmic Implementations, Inc. All Rights Reserved.ZoomText Fusion Quick Reference GuideCopyright ? 2016, Algorithmic Implementations, Inc. All Rights Reserved.Unauthorized copying, duplicating, selling or otherwise distributing this software or documentation is a violation of Federal Copyright Law. No part of this publication can be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form by any means without the express written consent of Algorithmic Implementations, Inc. (d.b.a. Ai Squared). XE "legal:Trademarks" TrademarksZoomText is a registered trademark of Algorithmic Implementations, Inc.ZoomText Magnifier, ZoomText Magnifier/Reader, ZoomText Fusion, ZoomText ImageReader and ZoomText Voices are trademarks of Algorithmic Implementations, Inc.NeoSpeech is a trademark of NeoSpeech, Inc.Microsoft and Windows are registered trademarks of Microsoft Corporation.Second Edition: March 2016Ai Squared, P.O. Box 669, Manchester Center, VT 05255 USAContents TOC \o "1-1" \h \z \u Welcome to ZoomText Fusion 10.1 PAGEREF _Toc444665161 \h 1System Requirements PAGEREF _Toc444665162 \h 2Installing ZoomText Fusion PAGEREF _Toc444665163 \h 3Starting ZoomText Fusion PAGEREF _Toc444665164 \h 4Setup Wizard PAGEREF _Toc444665165 \h 5Activating ZoomText Fusion PAGEREF _Toc444665166 \h 5Touch Screen Support PAGEREF _Toc444665167 \h 7ZoomText Fusion User Interface PAGEREF _Toc444665168 \h 10Enabling and Disabling ZoomText Fusion PAGEREF _Toc444665169 \h 12Magnifier Toolbar PAGEREF _Toc444665170 \h 13Setting the Magnification Level PAGEREF _Toc444665171 \h 14Selecting a Zoom Window PAGEREF _Toc444665172 \h 15Adjusting a Zoom Window PAGEREF _Toc444665173 \h 18Using the Freeze Window PAGEREF _Toc444665174 \h 19Using View Mode PAGEREF _Toc444665175 \h 20Color Enhancements PAGEREF _Toc444665176 \h 21Pointer Enhancements PAGEREF _Toc444665177 \h 22Cursor Enhancements PAGEREF _Toc444665178 \h 23Focus Enhancements PAGEREF _Toc444665179 \h 24Font Enhancements PAGEREF _Toc444665180 \h 25Using the Desktop Finder PAGEREF _Toc444665181 \h 26Using the Web Finder PAGEREF _Toc444665182 \h 27Using the Text Finder PAGEREF _Toc444665183 \h 30Smooth Panning PAGEREF _Toc444665184 \h 32Reader Toolbar PAGEREF _Toc444665185 \h 33Turning Speech On and Off PAGEREF _Toc444665186 \h 34Adjusting the Speech Rate PAGEREF _Toc444665187 \h 35Synthesizer Settings PAGEREF _Toc444665188 \h 36Typing Echo PAGEREF _Toc444665189 \h 37Mouse Echo PAGEREF _Toc444665190 \h 38Verbosity PAGEREF _Toc444665191 \h 39AppReader PAGEREF _Toc444665192 \h 40Read from Pointer (AppReader) PAGEREF _Toc444665193 \h 42DocReader PAGEREF _Toc444665194 \h 43Reading Zones PAGEREF _Toc444665195 \h 46SpeakIt Tool PAGEREF _Toc444665196 \h 51Text Reading Commands PAGEREF _Toc444665197 \h 52Fusion Toolbar PAGEREF _Toc444665198 \h 54Advanced Screen Reader Settings PAGEREF _Toc444665199 \h 55Browse Mode PAGEREF _Toc444665200 \h 56Page Navigation PAGEREF _Toc444665201 \h 57Tutor Mode PAGEREF _Toc444665202 \h 58Learning Center PAGEREF _Toc444665203 \h 59Pronunciation PAGEREF _Toc444665204 \h 60Tools Toolbar PAGEREF _Toc444665205 \h 61ZoomText Camera PAGEREF _Toc444665206 \h 61ZoomText Recorder PAGEREF _Toc444665207 \h 68Background Reader PAGEREF _Toc444665208 \h 70Hotkeys PAGEREF _Toc444665209 \h 72Configuration Files PAGEREF _Toc444665210 \h 87The Default Configuration PAGEREF _Toc444665211 \h 88Application Settings PAGEREF _Toc444665212 \h 89ZoomText Fusion Scripting PAGEREF _Toc444665213 \h 90Welcome to ZoomText Fusion 10.1ZoomText Fusion 10.1 is a powerful computer access solution for the visually-impaired. Consisting of two adaptive technologies – screen magnification and screen reading – ZoomText Fusion allows you to see and hear everything on the computer screen, providing complete access to applications, documents, email and the Internet. This quick reference guide provides helpful information on installing and using the key features of ZoomText Fusion.Note:This guide does not describe all of the features of ZoomText Fusion 10.1, nor is it intended to replace the full documentation. For complete information, refer to the ZoomText Fusion User's Guide or online help system. To launch the online help system, select Help ZoomText Help in the ZoomText Fusion menu bar.System RequirementsTo run ZoomText Fusion 10.1 you must have a system that includes the following:Windows 7, 8.1, or 10Processor: 2 GHz single core or 1 GHz dual coreMemory (RAM): 2 GBRecommended: 4 GB or higherGraphics card with support for DirectX 9.1 or aboveRecommended: DirectX 10 or laterRecommended: 256 MB dedicated video memoryHard disk space: 800 MB for US English, 1 GB for international versions5-point multi-touch display required for ZoomText Fusion Touch Mode support Sound cardUSB 2.0 (for future ZoomText Fusion Camera support)Installing ZoomText FusionWhen you insert the ZoomText Fusion DVD into your DVD-ROM drive, the Setup program will start automatically. Follow the on-screen instructions to complete the installation.If Setup does not start automaticallyPress WINDOWS + R to open the Run dialog box.Browse to your DVD-ROM drive.Select the Setup program and click Open.Click OK in the Run dialog box.Uninstalling ZoomText FusionTo uninstall ZoomText Fusion in Windows 10In the Windows Start menu, choose All Apps ZoomText 10.1 Other Uninstall ZoomText Fusion.To uninstall ZoomText Fusion in Windows 8.xOn the Start Screen, type: Uninstall ZoomText Fusion. Choose the Uninstall ZoomText Fusion item.To uninstall ZoomText Fusion in Windows 7In the Windows Start menu, choose Programs ZoomText 10.1 Other Uninstall ZoomText Fusion.Starting ZoomText FusionOnce ZoomText Fusion is installed on your system, it can be started using one of the following procedures.To start ZoomText Fusion in Windows 10On the Windows desktop, click on the ZoomText Fusion 10.1 icon.In the Windows Start menu, choose All Apps ZoomText Fusion 10.1 ZoomText Fusion 10.1.To start ZoomText Fusion in Windows 8.xOn the Start Screen, click on the ZoomText Fusion 10.1 tile.On the Windows desktop, click on the ZoomText Fusion 10.1 program icon.On the Start Screen, type: ZoomText Fusion. Choose the ZoomText Fusion 10.1 item.To start ZoomText Fusion in Windows 7On the Windows desktop, click on the ZoomText Fusion 10.1 icon.In the Windows Start menu, choose Programs ZoomText Fusion 10.1 ZoomText Fusion 10.1.When ZoomText Fusion starts up, it changes your display to show a magnified view of the normal screen. As you move the mouse, type text and navigate your applications, the magnified view automatically scrolls, keeping the area of activity in view. ZoomText Fusion will also speak aloud, narrating your actions as you work with your documents and applications.Setup WizardThe Setup Wizard will run the very first time you launch ZoomText Fusion. The Setup Wizard asks you a series of questions that allows you to set up your magnification, speech, braille, and keyboard preferences without having to manually do so. You will also be given the option to skip the Setup Wizard and use the default settings. Click the Skip and Use Defaults button in the Setup Wizard dialog box to do so.Activating ZoomText FusionZoomText Fusion 10.1 contains product activation technology designed to eliminate unauthorized use of ZoomText Fusion, without imposing a burden on legitimate users. Product activation is a simple, straightforward and anonymous process that takes just a few seconds to complete when performed over the Internet. After you install ZoomText Fusion you have up to 60 days to activate the software. Until you do, ZoomText Fusion will run as a trial. You can activate immediately or anytime during the 60-day trial period. All features are available during the trial period, so you have full use of the software. When the trial period expires you must activate ZoomText Fusion to continue using it.Preparing to Activate ZoomText FusionTo activate ZoomText Fusion 10.1 you will need your ZoomText Fusion 10.1 serial number, provided with your purchased copy. If you have purchased an upgrade version of ZoomText Fusion 10.1 you will also need the serial number from your previous version of ZoomText (version 9.1 or earlier) unless your previous version is already installed on your system. These serial numbers can be found in the following locations of your ZoomText Fusion product packages: on the ZoomText Fusion DVD sleeve, on the product registration card, on the top of the ZoomText Fusion box, and on back of the ZoomText Fusion User’s Guide.During the 60-day trial period, each time you start ZoomText Fusion the Activation Wizard appears. The wizard presents the following options for you to choose from:Option 1: I have a serial number and want to activate ZoomTextChoose this option if you have already purchased or been provided with a ZoomText Fusion product and you're ready to activate the software. The wizard will guide you through the activation process.Option 2: I want to purchase ZoomTextChoose this option if you are ready to purchase a ZoomText Fusion product. The wizard will display information on how to purchase ZoomText Fusion.Option 3: I want to try ZoomTextChoose this option if you want to run ZoomText Fusion in trial mode. Trial mode allows you to use ZoomText Fusion for up to 60 days. When the 60-day trial period expires, you must activate ZoomText Fusion to continue using it.For complete information on activating ZoomText Fusion, see “Activating ZoomText Fusion 10.1” in the ZoomText Fusion User's Guide or online help system.Touch Screen SupportZoomText Fusion 10.1 can be used on Windows 8.x and Windows 10 touch screen devices including tablets, laptops and desktop monitors. ZoomText Fusion follows along as you tap, drag and swipe your way through all of your applications. ZoomText Fusion will not interfere with these gestures and will respond to events produced by gestures the same way it responds to events produced using the keyboard and mouse. You can also access ZoomText Fusion’s user interface (toolbars, menus and dialogs) using the same standard gestures that you are used to from other applications. Using a standalone touch screen device requires the use of an on-screen keyboard. When using a screen magnifier, the on-screen keyboard will not be fully visible, forcing you to pan the magnified view in order to access all of the keys. This will slow down your typing speed as well as your productivity considerably. Therefore, we recommend connecting a physical keyboard when you need to perform large amounts of typing.Note:You must have a Windows 8.x or Windows 10 device that supports at least five simultaneous touch points. These devices will display the “Designed for Windows” logo.ZoomText Fusion 10.1 provides a special ZoomText Fusion Touch Icon, allowing you to instantly access key ZoomText Fusion features using touch gestures. These features include zooming in and out, scrolling the magnified view and using ZoomText Fusion’s reading tools like AppReader and the SpeakIt Tool. Here’s how it works…By default, when you install ZoomText Fusion 10.1 on a touch screen device, the ZoomText Fusion Touch Icon will appear on an edge of the screen. This floating icon remains visible even when you zoom in and out or scroll the magnified view. You can move the icon to several anchor points along the edges of your screen. This lets you position the icon exactly where you’d like it to be on screen, and allows you to move it if the icon is covering an item you need to see.The ZoomText Fusion Touch Icon has two modes of operation: Windows Touch Mode and ZoomText Fusion Touch Mode.Windows Touch Mode passes all touch gestures to Windows and any other applications that are open on the screen, just as if ZoomText Fusion was not running on the system. This is the mode you need to be in when you want to interact with your desktop or applications using touch gestures (including the ZoomText Fusion toolbar). When in Windows Touch Mode, the icon appears as a group of Windows 8.x Start Screen tiles with a pointing finger at the bottom.ZoomText Fusion Touch Mode passes all touch gestures to ZoomText Fusion. This is the mode you need to be in when you want to access the ZoomText Fusion features that are supported by gestures (e.g. zoom in or out a little, or pan the magnified view). When in ZoomText Fusion Touch Mode, the icon appears as a ZoomText Fusion logo with a pointing finger at the bottom.This icon will also pulse (fade in and out) to let you know that ZoomText Fusion Touch Mode is active.To switch between Windows Touch Mode and ZoomText Fusion Touch ModeDouble-tap the Touch Icon with one finger.Tip!You can momentarily switch between touch modes by holding one finger on the Touch Icon. When you move your finger off of the icon, the previously active touch mode is automatically restored. This means that when in Windows Touch Mode, you can momentarily switch to ZoomText Fusion Touch Mode to pass a gesture to ZoomText Fusion and then automatically return to Windows Touch Mode (and vice versa).To enable or disable the Touch IconIn the Settings menu, choose Touch Screen Support Enable Touch Icon (or Disable Touch Icon).To adjust the size of the Touch IconIn the Settings menu, choose Touch Screen Support Touch Icon Size {size}.To select a color scheme for the Touch IconIn the Settings menu, choose Touch Screen Support Touch Icon Color {color}.To move the Touch Icon around the screenPress and hold one finger on the icon and drag it to a desired location anywhere along the edge of the screen.To display the ZoomText Fusion user interfaceDouble-tap with four fingers.To adjust the magnification level (zoom in and out)Double-tap and hold three fingers, then drag up to zoom in or drag down to zoom out.To pan the magnified viewDrag three fingers to move around the screen.For complete information on using ZoomText Fusion’s Touch Screen Support, refer to the ZoomText Fusion User's Guide or online help system.ZoomText Fusion User InterfaceWhen you start ZoomText Fusion its user interface appears on the screen. This window contains all of the menus and controls for operating ZoomText Fusion. Features associated with magnification, speech, advanced screen reading and productivity tools are grouped into separate toolbars and dialogs.847898228913Magnifier tabDisplays controls for ZoomText Fusion's magnification features.00Magnifier tabDisplays controls for ZoomText Fusion's magnification features.133478624600Reader tabDisplays controls for ZoomText Fusion's screen reading features.00Reader tabDisplays controls for ZoomText Fusion's screen reading features.1928553133531Fusion tabDisplays controls for ZoomText Fusion's advanced screen reading features.00Fusion tabDisplays controls for ZoomText Fusion's advanced screen reading features.302108389428Tools tabDisplays controls for ZoomText Fusion's tools features.00Tools tabDisplays controls for ZoomText Fusion's tools features.40830597155ZoomText Fusion buttonEnables or disables ZoomText Fusion.00ZoomText Fusion buttonEnables or disables ZoomText Fusion.300863073660Minimize buttonHides the ZoomText Fusion user interface.00Minimize buttonHides the ZoomText Fusion user interface.The ZoomText Fusion user interface can be minimized (hidden) and restored (made visible), without affecting the operation of ZoomText Fusion.To minimize ZoomText FusionDo one of the following:On the ZoomText Fusion title bar, click on the minimize button.While the ZoomText Fusion user interface is active, press ESC.To restore ZoomText FusionDo one of the following:Click on the ZoomText Fusion 10.1 button in the task bar.Press the Display User Interface hotkey: CTRL + SHIFT + U.Enabling and Disabling ZoomText FusionYou can enable and disable ZoomText Fusion at any time, without exiting the program. When disabled, ZoomText Fusion returns the screen to its normal (unmagnified) state and all speech output is terminated.To enable ZoomText FusionDo one of the following:On the ZoomText Fusion user interface, click on the ZoomText Fusion button.Press the Enable ZoomText Fusion hotkey: ALT + CAPS LOCK.To disable ZoomText FusionDo one of the following:On the ZoomText Fusion user interface, click on the ZoomText Fusion button.Press the Disable ZoomText Fusion hotkey: ALT + DELETE.Magnifier ToolbarThe Magnifier toolbar provides quick access to ZoomText Fusion's magnification features. Each toolbar button has an intuitive icon and label for easy identification. Many of these buttons have pop-up menus that provide fast access to the most important and frequently used settings. Related buttons are grouped together and the group is labeled with a clickable link that opens their associated dialog box. Features associated with this toolbar are described in pages 14 through 31. 194246584455IconGroup labelIcon labelGroup00IconGroup labelIcon labelGroup30797522479000Setting the Magnification LevelZoomText Fusion provides a wide range of magnification levels, allowing you to enlarge the view according to your needs. Magnification levels range from 1x to 60x (1x to 8x in steps of 1, 10.1x to 16x in steps of 2, 20x to 36x in steps of 4, 42x to 60x in steps of 6, and fractional powers of 1.2x, 1.4x, 1.6x, 1.8x, 2.5x, 3.5x and 4.5x).By default, when using multiple monitors with the zoom window type set to MultiView Local or MultiView Global, each view has its own magnification level, which is adjustable only when the view is active. Therefore, the Zoom In and Zoom Out hotkeys, mouse wheel zooming, and the Power controls in the ZoomText user interface always adjust and reflect the magnification level for the active view.To adjust the magnification levelOn the Magnifier toolbar, adjust the level in the Power spin box, or press the Magnification hotkeys:To…Press…Increase magnificationALT + NUMPAD PLUSDecrease magnificationALT + NUMPAD MINUS 1x view (normal screen)3x View2x ViewSelecting a Zoom WindowZoom Windows When Running with One Monitor When your system is running with one monitor, or with two monitors set to “Duplicate these displays”, you can set the magnified view to any of the following zoom window types: Full, Overlay, Lens, Line and four Docked positions (Top, Bottom, Left and Right).Zoom Windows When Running with Multiple Monitors When your system is running with multiple monitors set to “Extend these displays”, you can set the magnified view to any of the following zoom window types: Span, Clone, Zoom with 1x, MultiView Local and MultiView Global (patent pending).To select a zoom window typeOn the Magnifier toolbar, select Type One Monitor (or Multiple Monitors) and then select the desired zoom window. You can also cycle through the zoom window types by pressing the Zoom Window hotkey: CTRL + SHIFT + Z.Zoom Window Types for One MonitorFull displays a magnified view that occupies the entire screen.Overlay displays a magnified view that can be sized and moved to occupy any portion of the screen. Lens moves over the normal screen like a magnifying glass, displaying what is directly beneath it. The lens automatically follows as you move the mouse pointer, type text and navigate your programs.Line moves up and down the screen like a magnifying ruler, displaying what is directly beneath it. The line window automatically follows as you move the mouse pointer, type text and navigate your programs.Docked splits the screen in half, displaying a magnified 'docked' view on one side and a normal (unmagnified) view on the other. The magnified view can be docked against any edge of the screen: top, bottom, left, or right.?Zoom Window Types for Multiple MonitorsSpan Displays a single contiguous magnified view that spans across all of your monitors.Clone Displays the same magnified view on two or more monitors.Zoom with 1x Displays a magnified view on your main display and a non-magnified (1x) view on your secondary display.MultiView Local Displays separate magnified views on each monitor, with each monitor’s view limited to its own desktop area. Only one magnified view is active and moving at a time. When the mouse pointer or application focus move from one desktop to another, the active view automatically switches monitors to follow along. You can switch the active view at any time by pressing the Active View hotkey: Ctrl + QMultiView Global Displays separate magnified views on each monitor, with each monitor’s view able to scroll and track activity across all desktop areas. Only one magnified view is active and moving at a time and that active view scrolls from one desktop to another to follow the mouse pointer and application focus. To switch the active view, press the Active View hotkey: Ctrl + QAdjusting a Zoom WindowZoomText Fusion's windows can be sized and/or moved to occupy a different portion of the screen (with the exception of Full zoom). To size and move a zoom windowOn the Magnifier toolbar, choose Type Adjust.The Adjust tool becomes active and sizing handles appear on the zoom window frame.To size the window, drag any handle.To move the window, drag inside the window frame.To scroll the contents of the window, hold down CTRL, and then drag inside the window frame.To exit the Adjust tool, right-click or press ESC.Using the Freeze WindowIn a magnified view, it is impossible to see the entire screen at once. As a result, you may not be able to view multiple items of interest at the same time, such as information located at opposite edges of the screen. The Freeze window allows you to monitor a selected area of the screen while you simultaneously view and work in other areas of the screen. To set up a Freeze windowSet the zoom window type to Full.In the Magnifier toolbar, select Type Freeze New.Move the mouse pointer until the area you want to freeze is scrolled into view.Drag to select the freeze area. The Freeze window appears with sizing handles on the frame.To size the window, drag any handle. To move the window, drag inside the window frame. To scroll the contents of the window, hold down CTRL and drag inside the window frame.To exit the Freeze tool, right-click or press ESC.To enable and disable the Freeze windowOn the Magnifier toolbar, choose Type Freeze Enable (or Disable).Using View ModeView mode shows you the area of the screen that’s currently being magnified, and allows you to select a new area to zoom in on. When view mode is activated, magnification turns off and the view locator appears in the normal screen. By moving the view locator, you can select a new area to zoom in on.To use View ModeIn the Actions menu, choose View Mode.Magnification is temporarily turned off and the view locator appears.Move the view locator to the desired screen location.Click to zoom-in on the new location.Magnification is restored with the selected screen area displayed.You can configure the view locator to appear in a variety of shapes and colors. To configure the view locatorIn the Magnifier menu, choose View Locator… Adjust the locator options as desired.Click the OK button.Color EnhancementsColor enhancements improve clarity of text and graphics, providing easier viewing and reduced eyestrain. The color enhancement options consist of a variety of filter?effects that adjust color, contrast and brightness. You can choose from preset color schemes or configure your own custom color settings.To choose a preset color schemeOn the Magnifier toolbar, select Color Scheme, and then select the desired color scheme.To configure custom color settingsIn the Magnifier menu, choose Color Enhancements…Select Custom…Adjust the custom settings as desired.Click the OK button.Note:You can turn color enhancements on and off using the Color Enhancements On/Off hotkey: CTRL + SHIFT + C.Pointer EnhancementsPointer enhancements make it easy to locate and follow the mouse pointer. You can adjust the size and color of the pointer, and activate a locator that emphasizes the pointer’s position on the screen. You can choose from preset pointer schemes or configure your own custom pointer settings. To choose a preset pointer schemeOn the Magnifier toolbar, select Pointer Scheme, and then select the desired pointer scheme.To configure custom pointer settingsIn the Magnifier menu, choose Pointer Enhancements…Select Custom…Adjust the custom settings as desired.Click the OK button.Note:You can turn pointer enhancements on and off using the Pointer Enhancements On/Off hotkey: CTRL + SHIFT + P.Cursor EnhancementsCursor enhancements make it easy to locate and follow the text cursor. A choice of high visibility locators marks the cursor’s position, without obscuring the surrounding text. You can choose from preset cursor schemes or configure your own custom cursor settings.To choose a preset cursor schemeOn the Magnifier toolbar, select Cursor Scheme, and then select the desired cursor scheme.To configure custom cursor settingsIn the Magnifier menu, choose Cursor Enhancements…Select Custom…Adjust the custom settings as desired.Click the OK button.Note:You can turn cursor enhancements on and off using the Cursor Enhancements On/Off hotkey: CTRL + SHIFT + R.Focus EnhancementsFocus enhancements make it easy to locate and follow the control focus when you tab and arrow through menus, dialogs, toolbars, and other application controls. When enabled a choice of high visibility locators mark the position of the control with focus, without obscuring any surrounding text. You can choose from preset focus schemes or configure your own custom focus settings.To choose a preset focus schemeOn the Magnifier toolbar, select Focus Scheme, and then select the desired focus scheme.To configure custom focus settingsIn the Magnifier menu, choose Focus Enhancements…Select Custom…Adjust the custom settings as desired.Click the OK button.Note:You can turn focus enhancements on and off using the Focus Enhancements On/Off hotkey: CTRL + SHIFT + O.Font EnhancementsWith conventional screen magnifiers, the clarity of fonts (text characters) is degraded in the magnified view. As a result, many fonts are difficult to read, including; small fonts, serif and italic fonts, and most cursive and ornate fonts. These problems are eliminated with ZoomText Fusion's patented xFont text enhancement technology. With xFont, all font types are magnified with perfect clarity – at all magnification levels. To turn font enhancements on and offPress the Font Enhancements hotkey: CTRL + SHIFT + F.To configure font enhancement optionsIn the Magnifier menu, choose Font Enhancements…Adjust the font enhancement options as desired.Click the OK button.Using the Desktop FinderThe Desktop Finder helps you find and open programs and documents located in the Windows desktop environment - including the quick launch bar, system tray and control panel. When executing the Desktop Finder, a dialog box displays a list of items located in the desktop environment. This list can be filtered and searched, allowing you to quickly locate the desired item. Desktop Finder 'Actions' allow you to open the item or view its properties.To use the Desktop FinderOn the Magnifier toolbar, select Desktop.The Desktop Finder dialog appears.Filter and sort the Desktop Items list by selecting the desired options under Show These Items and Sort Items By.To narrow the search, type the information you are searching for in the Search For combo box, or select a recent entry from the combo box list.Select the desired item in the Desktop Items list.Click the Open button to launch the selected item, or the Properties button to view the properties for the selected item.Using the Web FinderThe Web Finder allows you to swiftly search, skim, navigate and read webpages. You can search for words or phrases throughout an entire webpage to find topics of interest. When you've found a topic of interest you can have Web Finder start reading from that location (ZoomText Fusion Magnifier/Reader only). Web Finder can also find and execute links and controls allowing you to seamlessly navigate between webpages. All of these actions are performed using Web Finder’s simple toolbar/dialog and keyboard commands.Web Finder provides two modes for searching webpages: Page Search and List Search. These modes and how to switch between them are described in the sections below.Note: Web Finder can be used in popular web browsers including Internet Explorer, Firefox, and Chrome.To use the Web FinderOn the Magnifier toolbar, select Web.The Web Finder toolbar/dialog appears.To use Page SearchIf Web Finder is currently in List Search mode, click the List button to switch to Page Search mode.Select the type of Page Items that you want to search. Choose "All?Text" to search for words or phrases anywhere on the page.In the Search box, type a word or phrase that you want to find. If the word or phrase does not exist in the selected type of page item the Search box will turn orange and the navigation buttons will be disabled (grayed out).Note:When Page Items is set to "All Text", you must type at least one character in the Search box to initiate a search. Click the Next and Previous buttons to navigate forward and backward.As you navigate each item is highlighted. When using ZoomText Fusion with speech enabled, the sentence containing the item is announced.To have Web Finder execute a link or control, click the Execute button.To have Web Finder start reading at the current item, click the AppRdr button. *To exit Web Finder, click the Exit button. To use List SearchIf Web Finder is currently in Page Search mode, click the List button to switch to List Search mode.In the Page Items combo box, select the type of items that you want to view in the Items found list.To search (or filter) the list, type a word or phrase in the Search box. As you type in the Search box the list is automatically filtered to display only items that contain the search string. The Search box turns orange when the typed word or phrase does not exist within the list of items.Select the desired sorting order in the Sort by list box. You can also sort the list by clicking on the Name and Type headings at the top of the list.To have Web Finder start reading from the selected item (using AppReader), click the AppRdr button. *To have Web Finder execute a link or control, click the Execute button.To have Web Finder go to the location of the selected item, click the GoTo button.To exit Web Finder, click the Exit button. Using the Text FinderThe Text Finder helps you locate words or phrases within the active application window or the entire screen. After entering the text you want to search for, the Text Finder highlights and reads each found occurrence of the text or the entire line that contains the text.To use the Text FinderOn the Magnifier toolbar, select Text.The Text Finder dialog appears. For information on this dialog, see “Text Finder” in ZoomText Fusion’s user’s guide or online help system.In the Search For box, type the word(s) you want to search for.Select any other Text Finder options that you want to use.Click the Search button.The Text Finder dialog is hidden and the first occurrence of the search text is highlighted and spoken according to the selected options. The Text Finder toolbar appears above the found text, providing controls for navigating and reading occurrences of the search text.To navigate to the next or previous occurrence of the search text, use the Text Finder toolbar or associated Text Finder commands.To exit the Text Finder, right-click or press ESC.The Text Finder toolbar appears above the found text, providing controls for navigating and reading occurrences of the search text.The Text Finder toolbarRead * Reads the entire line that contains the found word. Shortcut Key: ENTERPrevious Displays the previous occurrence of the search text. Shortcut Key: LEFT or SHIFT + TABNext Displays the next occurrence of the search text. Shortcut Key: RIGHT or TAB Start AppReader * Launches AppReader and begins reading from the location of the highlighted search text. Shortcut Key: A or ALT + SHIFT + A Settings Returns to the Text Finder dialog. Shortcut Key: BACKSPACEClose Exits the Text Finder. Shortcut Key: ESCSmooth PanningSmooth panning (patent pending) provides a more natural panning motion when the magnified view scrolls to keep the focus in view. As you type text and navigate menus, dialogs and other program controls the magnified view smoothly pans across the screen, rather than jumping in an abrupt manner. You can also use “smooth mouse panning” to smoothly pan and explore in any direction.Note:Smooth mouse panning is only available when the zoom window type is set to Full.To enable and adjust smooth panningIn the Settings menu, choose Panning...Make sure the Enable smooth panning box is checked.Adjust the panning options as desired.Click the OK button.Note:You can turn smooth panning on and off using the Smooth Panning On/Off hotkey: WINDOWS + SHIFT + P. Reader ToolbarThe Reader toolbar provides quick access to ZoomText Fusion's speech settings and reading tools. Each toolbar button has an intuitive icon and label for quick identification. Many of these buttons have pop-up menus that provide fast access to the most important and frequently used settings. Related buttons are grouped together and the group is labeled with a clickable link that opens their associated dialog box. Features associated with this toolbar are described in pages 33 through 52. 3853815137795IconGroup labelIcon labelGroup00IconGroup labelIcon labelGroup32639024701500Turning Speech On and OffYou can turn speech output on and off without disabling the magnification features. To enable and disable speechOn the Reader toolbar, select Speech Enable (or Disable), or, press the Speech On/Off hotkey: ALT + SHIFT + SNote:AppReader, DocReader and the SpeakIt tool can be used when speech is disabled.There may be times when you want to terminate speech output while it is occurring. For example, when ZoomText Fusion is reading a message box that you are already familiar with. You can force ZoomText Fusion to stop speaking this text without turning speech off altogether.To terminate speech output as it occursPress and release the CTRL key.The information that is currently being spoken is terminated. Adjusting the Speech RateSpeech rate allows you to control how fast ZoomText Fusion speaks in words per minute (SAPI 4 synthesizers) or in percentage of the synthesizer's range (SAPI 5 synthesizers).To adjust the speech rateOn the Reader toolbar, adjust the level in the Rate spin box, or, use the Speech Rate hotkeys:To…Press…Increase speech rateCTRL + NUMPAD PLUSDecrease speech rateCTRL + NUMPAD MINUSA separate speech rate is available for AppReader and DocReader. This setting is located in the Reading Options dialog box. In the Reader menu, choose Reader Options…Synthesizer SettingsSynthesizer settings let you customize the screen reading voice. You can select from a variety of male and female voices, and adjust their speaking rate, pitch and volume.Note:ZoomText Fusion comes with two speech synthesizers: Vocalizer Expressive and NeoSpeech (English only). The ZoomText Fusion Setup program will install both of these synthesizers automatically. ZoomText Fusion also supports other SAPI 4 and 5 based synthesizers or hardware devices that have been installed on your system.To adjust the speech synthesizer settingsIn the Reader menu, choose Synthesizer…The ZoomText Screen Reader dialog opens.Choose a Synthesizer and Voice. Navigate to Screen -> Voice, and adjust the rate, pitch and volume as desired. When satisfied with the changes, click the Close button.Typing EchoTyping echo allows you to hear the keys and words that you type. You can choose to have individual keys, words, or both keys and words spoken. Typed words are spoken upon completion (as soon as you type a space or punctuation character). Additional typing echo options also allow you to select which keys are spoken – all keys or selected groups of keys. To enable typing echoOn the Reader toolbar, click Typing and then select the desired typing echo mode.To adjust the typing echo optionsIn the Reader menu, choose Typing Echo…The ZoomText Screen Reader dialog opens.Adjust the typing echo options as desired.Click the Close button.Mouse EchoMouse echo automatically reads text beneath the pointer. As you move the pointer across the screen, single words or complete lines of text are echoed instantly or after hovering briefly. To enable mouse echoOn the Reader toolbar, click Mouse and then select the desired mouse echo mode.To adjust the mouse echo optionsIn the Reader menu, choose Mouse Echo…The ZoomText Screen Reader dialog opens.Adjust the mouse echo options as desired.Click the Close button.VerbosityVerbosity allows you to adjust the amount of information spoken about program controls when they become active or highlighted. Program controls include: application and document windows, menus, dialogs, buttons, icons, and more. Three verbosity levels – Beginner, Intermediate and Expert – allow you to quickly increase or decrease the verbosity. Beginner verbosity provides more information, while Expert verbosity provides less information. Each of these verbosity levels can be fully customized according to your personal needs. To select a verbosity levelOn the Reader toolbar, click Verbosity and then select the desired verbosity level.To adjust the verbosity optionsIn the Reader menu, choose Verbosity…The ZoomText Screen Reader dialog opens.Adjust the verbosity options as desired.Click the Close button.AppReaderAppReader reads documents, web pages and email, within the parent application. As you enter and exit AppReader your view of the document does not change, providing quick and seamless transitions between document editing and reading.AppReader can automatically read through the entire document, or you can manually read by word, line, sentence or paragraph. As reading occurs, each spoken word is highlighted. AppReader settings allow you to customize the appearance of word highlighting, including the highlight shape, size, color, and transparency level.8923282859996AppReader highlighting00AppReader highlighting1113046161452000To adjust the AppReader settings In the Reader menu, choose AppReader…Adjust the AppReader settings as desired.Select the OK button.To start and operate AppReaderOpen the document, web page or email that you wish to read.Press the AppReader hotkey: ALT + SHIFT + A, or, on ZoomText Fusion's Reader toolbar, click the AppRdr button.AppReader begins reading from the current text cursor position. Note: The AppReader button is disabled (grayed out) when the last active application does not contain readable text.To stop reading, press CTRL or click with the mouse. When AppReader stops reading, the cursor is automatically positioned at the last word that was highlighted in AppReader (if a cursor exists).Read from Pointer (AppReader)The Read from Pointer command lets you instantly start AppReader at the word under the mouse pointer, making use of AppReader fast and seamless in documents, web pages and email.To use the Read from Pointer commandPosition the mouse pointer over the word where you want AppReader to start.Press the Read from Pointer command: ALT + SHIFT + LEFT-CLICK.AppReader starts up and begins reading at the word under the mouse pointer.DocReaderDocReader reads documents, web pages, and email, in a special environment where text is reformatted for easier viewing. Text is presented in a single line (Ticker) or wrapped lines (Prompter), with your choice of fonts, colors, word highlighting, and magnification level. DocReader can automatically read through an entire document, or you can manually read by word, line, sentence or paragraph. As reading occurs, each spoken word is highlighted.Ticker mode Prompter modeTo start and operate DocReaderOpen the document, web page or email that you wish to read.Press the DocReader hotkey: ALT + SHIFT + D, or, on ZoomText Fusion's Reader toolbar, click the DocRdr button.The DocReader screen appears with text from the source document. If the source document contains an active text cursor, the word at the cursor position is highlighted in the DocReader display. Otherwise, the first word in the DocReader screen is highlighted.Note: The DocReader button is disabled (grayed out) when the last active application does not contain readable text.To start and stop reading, click the Play button or press ENTER. While paused, you can click any word to set a new location to read from.To read manually, use the text reading commands (see "Text Reading Commands" on page 51).To exit DocReader, right-click or press ESC.When DocReader exits, the text cursor is automatically positioned at the last word that was highlighted in DocReader (if a cursor exists).The DocReader toolbar provides controls for operating DocReader and accessing settings that modify the appearance of text and highlighting.DocReader toolbarPlay/PauseStarts and stops reading at the highlighted word.RateControls how fast DocReader speaks.PowerSets the magnification level used by DocReader, from 1x to 36x.TickerDisplays a single line of text that scrolls horizontally like a tickertape, along with a 1x view of the source document that appears beneath. PrompterDisplays multiple wrapped lines of text that scroll vertically like a teleprompter.SettingsOpens the Reading dialog box to change the DocReader settings.SpeechOpens the Speech dialog box to change the speech settings.ExitExits DocReader and activates the source application.Reading ZonesReading zones let you instantly see and hear selected locations in an application window. For example, your database application may display a dozen or more fields of information. In your normal work flow you may be interested in only a few of these fields. With reading zones, you can instantly see and/or hear these select fields with the press of a hotkey.You can create up to 10.1 reading zones per application. As you open and switch between applications, the zones for the active application are automatically loaded and ready to use.The Reading Zones ToolbarThe Reading Zones toolbar appears over the active reading zone whenever you access reading zones. The toolbar provides controls for navigating and reading the defined zones.Reading Zones toolbar - Edit and Navigate modesReading Zones toolbar – Trigger modePlay/Pause/Stop Starts and stops reading. When Play mode is executed, the Pause or Stop button appears on the toolbar (according to the mode that is active). The Pause button appears in Trigger and Navigate modes where you can pause and restart reading at the highlighted word. The Stop button appears in Edit mode where reading always restarts at the first word in the zone. Shortcut Key: ENTERPrevious Activates the previous reading zone. Shortcut Key: SHIFT + TABNext Activates the next reading zone. Shortcut Key: TAB Close Exits the Reading Zone mode. Shortcut Key: ESCTo create a reading zoneOpen the application in which you want to create reading zones. Make sure the desired application tab, view or window is displayed.On ZoomText Fusion’s Reader toolbar, select Zones New, or, press the Reading Zones hotkey: CTRL + ALT + WIN + Z.The New Zone Tool becomes active and all existing zones for the active application are displayed.Move the mouse pointer to scroll the new zone area into view.Hold down the left button, drag the selection rectangle over the desired zone area and release the button.When you complete the drag (release the mouse button), the Reading Zones dialog appears. This dialog allows you to name the zone and select zone options. For complete information on this dialog, see “Reading Zones Settings” in ZoomText Fusion’s user’s guide or online help system.In the Zone Name box, type a descriptive name for the new zone.When you navigate to the next dialog control, the new zone name will appear in the Zones list.Under Zone is relative to, select the zone's relative position within the application window.Under Zone Actions, select the desired options.To test the new zone, click Trigger.The Reading Zones dialog is temporarily hidden while the zone is displayed and/or spoken according to the selected settings.To create additional zones, click New Zone and repeat steps 4 through 9.When you're done creating and editing zones, click the OK button.To edit reading zonesOpen the application that contains the zones you want to edit.On ZoomText Fusion’s Reader toolbar, select Zones Edit, or, press the Edit Reading Zones hotkey: CTRL + ALT + WIN + E.The Edit Zones Tool becomes active and all existing zones for the active application are displayed. The Reading Zones toolbar appears over the active zone.Move the mouse pointer to scroll the desired zone into view, or click the Next or Previous buttons on the Reading Zones toolbar.Click inside the zone to activate the sizing handles and toolbar.To size the zone, drag any handle. To move the zone, drag inside the zone frame.To test reading of the zone, click the Play button. To move to another zone, press the number of the desired zone, or click the Next or Previous buttons.To edit another reading zone, repeat steps 4 through 8.To exit the Edit Zones tool, right-click or press ESC.To trigger a reading zoneOpen the application that contains the zones you want to trigger.On ZoomText Fusion’s Reader toolbar, select Zones Trigger, then select the desired reading zone.The selected reading zone is displayed and/or spoken according to the zone settings.You can also trigger reading zones using the following methods:Press the List Reading Zones hotkey: CTRL + ALT + WIN + L, then select the desired zone from the menu.Use the Reading Zone hotkeys:To trigger…Press…Trigger zone 1 … 10CTRL + ALT + WIN + 1 … 0Next reading zone CTRL + ALT + WIN + NPrevious reading zoneCTRL + ALT + WIN + PTo navigate through all reading zonesOpen the application that contains the zones you want to navigate.On ZoomText Fusion’s Reader toolbar, select Zones Navigate, or press the Navigate Reading Zones hotkey: CTRL + ALT + WIN + V.Navigate Mode becomes active and the Reading Zones toolbar appears over the first active zone. The zone name and number are spoken.To start and stop reading of the zone, click the Play/Pause button.Note:The Play/Pause button is disabled (grayed out) when navigating to non-spoken zones.To navigate to another zone, click the Next and Previous buttons.To exit Navigate Mode, click the Exit button on the Navigate toolbar. You can also exit by right-clicking or pressing ESC.SpeakIt ToolThe SpeakIt tool allows you to read selected areas of the screen by clicking or dragging with the mouse. Any text that is visible on the screen can be spoken, even if it is outside the active program. Note:Text that appears in graphical images cannot be spoken.To use the SpeakIt toolOn the Reader toolbar, click the SpeakIt button, or, press the SpeakIt Tool hotkey: ALT + SHIFT + I. To speak a single word, click on the word.To speak a block of text, drag to highlight the text. Upon release of the mouse button, all highlighted text will be spoken.To exit the SpeakIt tool, right-click or press ESC.Text Reading CommandsText reading commands let you navigate and read while creating and editing documents (by word, line, sentence or paragraph). When using these commands, the text cursor moves in accordance with the command. For example, when pressing the Say Next word command, the cursor moves to the beginning of the next word and it is spoken. The following table lists the text reading commands.Note:Num Lock must be turned off when using ZoomText Fusion commands that utilize the numeric keypad.Text Reading CommandsKeysSay Previous CharacterLEFTSay Current Character 1NUMPAD 5Say Next CharacterRIGHTSay Previous WordCTRL + LEFTSay Current Word 2CTRL + NUMPAD 5Say Next WordCTRL + RIGHTSay Previous SentenceUNDEFINEDSay Current SentenceCTRL + ALT + NUMPAD 5Say Next SentenceUNDEFINEDSay Previous Line 3UPSay Current LineSHIFT + NUMPAD 5Say Next Line 3DOWNSay Previous ParagraphCTRL + UP?Say Current ParagraphCTRL + SHIFT + NUMPAD 5Say Next ParagraphCTRL + DOWN1Second press of the Say Current Character command speaks the character phonetically ("Alpha, Bravo, Charlie…")2Repeated presses of the Say Current Word command operates as follows:First press: speaks the wordSecond press: spells the wordThird press: spells the word phonetically ("Alpha, Bravo, Charlie…")Note: Repeated presses must occur within two seconds.3This command reads the current word or entire line according to the Program Echo setting When the text cursor moves into a new line.Fusion ToolbarThe Fusion toolbar provides quick access to ZoomText Fusion's advanced screen reading features and instructional tools. Each toolbar button has an intuitive icon and label for easy identification. Related buttons are grouped together and the group is labeled with a clickable link that opens their associated dialog box. Features associated with this toolbar are described in pages 54 through 59. 1720850460375Group label00Group label19005552256155Group00Group-457201085215001497965148590Icon00Icon15100302573020Icon label00Icon label-14097077089000Advanced Screen Reader SettingsZoomText Fusion is a flexible solution with a robust set of customizable screen reader settings. The Screen Reader Settings dialog can be used to explore and configure the available options.To open the Screen Reader Settings dialog On the Fusion toolbar, click Settings or choose Verbosity… in the Fusion menu.Browse ModeBrowse Mode is a feature that provides enhanced keyboard navigation for web pages, PDF documents, PowerPoint presentations and other file types that are presented in a web-style view. To adjust Browse Mode settingsOn the Fusion toolbar, click BrowseMode or choose the Browse Mode pull down in the Fusion menu.Page NavigationThe Page Navigation dialog lists the available links, frames, tables, headings, lists, anchors, forms, controls, and landmarks that happen to be on the current web page. It can also provide lists of available elements in Word documents, Excel spreadsheets, PowerPoint presentations and PDFs.To open the Page Navigation dialog On the Fusion toolbar, click PageNav or choose Verbosity… in the Fusion menu. Pressing INSERT + F7 will also open the Page Navigation dialog.Tutor ModeTutor Mode provides spoken keyboard hints for interacting with common Windows control, such as buttons, list views, radio buttons, edit boxes, etc. To adjust Tutor Mode settingsOn the Fusion toolbar, click TutorMode or choose Tutor Mode… in the Fusion menu.Learning CenterLearning Center is an instructional tool that provides access to self-paced ZoomText Fusion tutorials. Learning Center tutorials are organized into the following categories: Getting Started, Magnification, Speech, Computer Basics, Browsing the Web and Microsoft Office.To open Learning Center On the Fusion toolbar, click LearningCtr or choose Learning Center… in the Fusion menu. PronunciationSpeech synthesizers sometimes make pronunciation errors especially when uniquely spelled proper nouns and acronyms are encountered. Through the use of ZoomText Fusion’s pronunciation dictionary, these errors can be corrected.To open the Pronunciation dictionary On the Fusion toolbar, click Pronunciation or choose Pronunciation… in the Fusion menu. Tools ToolbarThe Tools toolbar provides quick access to ZoomText Fusion's tools features. Each toolbar button has an intuitive icon and label for easy identification. Related buttons are grouped together and the group is labeled with a clickable link that opens their associated dialog box. Features associated with this toolbar are described in pages 61 through 70. 168857484455Icon00Icon170190948895Group label00Group label-62121635000019159469900017005301290320Icon label00Icon label1700639965200Group00GroupZoomText CameraThe ZoomText Camera feature allows you to use any high-definition (HD) webcam to magnify printed items and other objects right on your computer screen—including bills, magazines, photographs, medicine labels, craft items and more. Simple controls allow you to quickly zoom in and out and choose between full and high contrast colors. You can also switch between Full and Docked screen views which allow you to see the camera image and your Windows desktop at the same time. And by utilizing affordable and readily available HD webcams, the ZoomText Camera feature offers a portable and affordable compliment or alternative to conventional CCTVs.Full ViewDocked (Top) ViewGetting Started With ZoomText CameraBefore you can use the ZoomText Camera feature you must acquire a suitable camera and camera stand, set up the camera in your work space and choose your camera in the ZoomText Camera settings.Acquiring a suitable camera and standTo use the ZoomText Camera feature, you will need an HD webcam with autofocus. For best quality, your webcam should deliver 10.180p video resolution with automatic low-light correction. A USB 2.0 port is also required to connect your webcam. In addition to a camera, you will also need a camera stand that can securely position the camera over the items you want to view. The stand should be adjustable and stable.Ai Squared offers high quality webcam and camera stand packages that are flexible, portable and affordable. For more information on these packages, visit the Ai Squared website at , or contact your Ai Squared dealer.Setting up your camera in your workspaceTo achieve best performance and usability with the ZoomText Camera feature, use the following guidelines when setting up your camera in your workspace:Position the camera as close as possible to your computer screen. This will allow you to easily manipulate items under the camera while viewing the image.Make sure there is sufficient lighting around the camera.Adjust the camera stand so that the camera is about 4 inches from the target item.Selecting a camera (when more than one camera is present)ZoomText Fusion automatically detects all webcams that are attached or built into your system. If your computer has more than one webcam, you will need to tell ZoomText Fusion which webcam you want it to use.To select a camera In the Tools menu, choose Camera…In the Active Camera list box, choose the camera you want to use.Click the OK button.Using ZoomText CameraUse the following steps to start, configure and use ZoomText Camera.To start ZoomText CameraOn the Tools toolbar, click the Docked button.The camera image appears in the top half of the screen while ZoomText Fusion's magnified view of the desktop remains on the bottom half of the screen. The ZoomText Camera toolbar appears in the bottom half.If the Camera toolbar is not in view, press CTRL?+ WINDOWS?+ T to bring the toolbar into view.ZoomText Camera toolbarTo rotate the camera imagePlace a document under the camera so that it is right-side up from your perspective. If the document is not oriented right-side up on the screen, click the Rotate button until the image appears right-side up.To zoom the image in and outClick the Zoom + and Zoom - buttons to adjust the magnification to a comfortable reading size.To adjust the image colorsClick the Color button.Choose between Normal (full color) and a variety of high-contrast Two-Color Schemes.Note:You can toggle between Normal (full color) and the selected Two-Color scheme using the Camera Two-Color On/Off hotkey: ALT + WINDOWS + SPACEBAR.To adjust the camera clarity (Brightness/Contrast)Click the Clarity button.The Camera Clarity dialog appears.Place a checkmark next to Enable brightness and contrast settings.Move the Brightness and Contrast sliders to adjust the clarity.Click the Reset button to return the Brightness and Contrast settings to the camera's defaults.Click the OK button.Tip:Use the Brightness setting to eliminate glare spots that are appearing in the image.Note:This button will be disabled (grayed out) if the active camera does not support adjustments to both brightness and contrast.To adjust the camera focusClick the Focus button.The Camera Focus dialog appears.Place a checkmark next to Enable manual camera focus.Move the Focus slider to adjust the image focus.Click the OK button.Note:This button will be disabled (grayed out) if the active camera does not support autofocus.To move the docked view locationClick the Docked button. Each click cycles through the docked views in the following (clockwise) order: Docked Top > Docked Right > Docked Bottom > Docked Left.To switch between Full and Docked viewsDo one of the following:From either Full or Docked view, press CTRL?+ WINDOWS + Z.From Docked View, on the ZoomText Camera toolbar click the Full button.To exit the ZoomText CameraDo one of the following:From Full view, press ESC.From Docked view, click the Exit button.From either Full or Docked view, press CTRL?+ WINDOWS + ENTER.To operate ZoomText Camera with hotkeysAll of ZoomText Camera settings can be adjusted and controlled using hotkeys. See "ZoomText Camera Hotkeys" on page 82).Camera Video and System PerformanceOn older computers, when using ZoomText Camera you may experience slow system and camera video performance when the camera is configured to run at a higher resolution, particularly at camera resolutions of 1280 and above. To resolve this problem, lower the camera resolution until your system and camera video performance is at an acceptable level. The resolution setting for ZoomText Camera is located in the Camera tab in ZoomText Fusion’s Tools dialog box. See “ZoomText Camera Settings” below.ZoomText Camera SettingsThe ZoomText Camera settings allow you to configure and launch the ZoomText Camera.To configure the ZoomText Camera settingsIn the Tools menu, choose Camera...The Tools dialog appears with the Camera tab displayed.ZoomText RecorderZoomText Recorder (currently unavailable) allows you to turn text from documents, webpages, email or other sources into audio recordings that you can listen to on your computer or transfer to your mobile device for listening to on the go. You simply copy or select the text you want to record and start ZoomText Recorder. With a few simple steps you give your recording a friendly name, choose a destination to record to and click the record button. And each recording is created using your choice of ZoomText Fusion voices or any other voices available on your system. When choosing iTunes or Windows Media Player as your destination your recordings are conveniently placed in a "ZoomText Recorder" playlist. And when using iTunes your recordings can be automatically synced when you plug in your iPod, iPhone or other iDevice.Starting ZoomText RecorderThere are two ways to record text when starting ZoomText Recorder. ZoomText Recorder can record text that you have copied to the Windows Clipboard or text that you have selected in the active application.To record text from the Windows ClipboardSelect the text that you want to record and copy it to the Windows Clipboard.Use one of the following methods to start ZoomText Recorder:Press the Record Clipboard Text hotkey: CTRL + CAPS LOCK + C.On the Tools toolbar, select Recorder.The ZoomText Recorder dialog appears.To record text selected in the active applicationSelect the text you want to record.Press the Record Selected Text hotkey: CTRL + CAPS LOCK + S.The ZoomText Recorder dialog pleting the recording processWhen you start ZoomText Recorder its dialog appears with the captured text ready to record. All you have to do is choose the desired recording options and select the Record Text button. A progress indicator appears during the recording process to let you know that it is working. You can stay and watch the progress indicator or switch to another application and make better use of your time. A friendly chime will sound when the recording process is complete. Recording times vary depending on the size of the text selection, chosen synthesizer, destination and speed of the system. However, our general rule of thumb for recording time is about 5 to 10.1 seconds per page of text.Note: When "Record text to:" is set to iTunes the iTunes application will open at the end of the recording process.Background ReaderBackground Reader (currently unavailable) allows you to listen to documents, webpages, email or any text while you simultaneously perform other tasks. You simply copy or select the text you want to listen to and start Background Reader. While the text is being read aloud, you are free to type notes, browse the web or do other work on your computer.Starting Background ReaderThere are two ways to capture text when starting Background Reader. Background Reader can read text that you have copied to the Windows Clipboard or text that you have selected in the active application.To read text from the Windows ClipboardSelect the text that you want to listen to and copy it to the Windows Clipboard.Use one of the following methods to start Background Reader:Press the Read Clipboard Text hotkey: CAPS LOCK + C.On the Tools toolbar, select BgRdr.The Background Reader toolbar appears and automatically starts reading the text you placed in the Windows Clipboard.To read text selected in the active applicationSelect the text you want to listen to.Press the Read Selected Text hotkey: CAPS LOCK + S.The Background Reader toolbar appears and automatically starts reading the text you selected in the active application.Note: If the toolbar does not appear when starting Background Reader the "Start toolbar minimized" option has been selected in the Background Reader settings. To access and disable this setting, in the Tools menu, choose Background Reader…Operating Background ReaderOnce you have started Background Reader you can operate it using the toolbar or the hotkeys. The toolbar is an easy way to get started and learn how Background Reader works. However, we highly recommend learning to use the hotkeys as they will allow you to seamlessly control Background Reader while you are working in other applications (without having to switch back and forth) and realize the true multitasking potential of Background Reader.To operate Background Reader using the toolbarTo start and stop reading, click the Play/Pause button.To skim forward and backward, click the Sentence and Word buttons.To restart reading at the beginning, click the Restart button.To read new text that you have placed in the Windows Clipboard, click the Capture button.To exit Background Reader, click the Exit button.To bring the Background Reader toolbar into viewWhen Background Reader is running you can bring its toolbar into view by pressing CAPS LOCK + T.To operate Background Reader using hotkeysBackground Reader can be fully operated using the Background Reader hotkeys. See "Background Reader Hotkeys" on page 81).HotkeysHotkeys are key combinations that execute ZoomText Fusion commands without having to activate the ZoomText Fusion interface. Hotkeys exist for almost all ZoomText Fusion features, allowing you to control ZoomText Fusion while another application is active.Some important facts about ZoomText Fusion hotkeys are:Hotkeys can be changed or disabled to eliminate conflicts with other programs.Both keys and mouse buttons can be used to define a hotkey.Each hotkey must be unique.Each hotkey consists of one or more modifier keys and a single primary key. The modifier keys consist of any combination of ALT, CTRL, SHIFT, CAPS LOCK INSERT, and the WINDOWS key. The primary key can be any other key or any mouse button.To change hotkey settingsIn the Settings menu, choose Hotkeys…The ZoomText Screen Reading dialog opens.Select the desired Hotkey Group and Hotkey Command.Adjust the hotkey combination as desired using the Capture Key button.Repeat steps 3 and 4 for each hotkey you wish to modify.Click the Close button.Browse Mode HotkeysCommandsKeysAnchor NextAAnchor PriorSHIFT + AAuto LoadINSERT + ABlock Quote NextQBlock Quote PriorSHIFT + QBrowse ModeINSERT + ZButton NextBButton PriorSHIFT + BCheck Box NextXCheck Box PriorSHIFT + XCombo Box NextCCombo Box PriorSHIFT + CControl NextFControl PriorSHIFT + FDifferent Line NextDDifferent Line PriorSHIFT + DEdit NextEEdit PriorSHIFT + EElement PropertiesINSERT + LBrowse Mode Hotkeys (continued)CommandsKeysForm InteractionCTRL + SLASHFrame NextMFrame PriorSHIFT + MGraphic NextGGraphic PriorSHIFT + GHeading NextHHeading PriorSHIFT + HLandmark Next;Landmark PriorSHIFT + ;Link NextLLink PriorSHIFT + LList NextSList PriorSHIFT + SList Item NextIList Item PriorSHIFT + IPage NavigationINSERT + F7Paragraph NextPParagraph PriorSHIFT + PPlace Marker DialogCTRL + SHIFT + KPlace Marker NextKPlace Marker PriorSHIFT + KBrowse Mode Hotkeys (continued)Place Marker, Jump ToJRadio Button NextRRadio Button PriorSHIFT + RSelect ContentF8Specified Control NextSLASHSpecified Control PriorSHIFT + SLASHText NextNText PriorSHIFT + NVisited Link NextVVisited Link PriorSHIFT + VTable NextTTable PriorSHIFT + TCell RightINSERT + WINDOWS + RIGHT ARROWCell LeftINSERT + WINDOWS + LEFT ARROWCell UpINSERT + WINDOWS + UP ARROWCell DownINSERT + WINDOWS + DOWN ARROWEnd of RowCTRL + INSERT + WINDOWS + RIGHT ARROWBeginning of RowCTRL + INSERT + WINDOWS + LEFT ARROWTop of ColumnCTRL + INSERT + WINDOWS + UP ARROWBottom of ColumnCTRL + INSERT + WINDOWS + DOWN ARROWHeader RotorCTRL + SHIFT + HWeb Application ModeCTRL + INSERT + ACursor HotkeysCommandsKeysCharacterNUMPAD 5WordCTRL + NUMPAD 5LineSHIFT + NUMPAD 5SentenceCTRL + ALT + NUMPAD 5ParagraphCTRL + SHIFT + NUMPAD 5Unicode/AttributeINSERT + FPositionCTRL + WINDOWS + NUMPAD PLUSMiscellaneous Screen Reader HotkeysCommandsKeysRead Active WindowINSERT + BSpeak SummaryINSERT + TABTitle/Status of Current ProgramINSERT + TProgress Or Scroll BarCTRL + INSERT + BStatus LineINSERT + NUMPAD 2Last Flash and TooltipCTRL + INSERT + THighlighted Block/Read Selected TextINSERT + SHIFT + NUMPAD 2Read To EndINSERT + NUMPAD DOWN 2Key DescriberINSERT + 1Program HelpINSERT + F1Time/DateINSERT + F12Battery LevelINSERT + QMiscellaneous Screen Reader Hotkeys (continued)Wireless StatusINSERT + WSys TrayINSERT + F11Default ButtonINSERT + EVerbosity DialogINSERT + VMenuALT + SHIFT + UEdit DictionariesINSERT + DBypassINSERT + 3Voice DownCTRL + NUMPAD MINUSVoice UpCTRL + NUMPAD PLUSVoice Selection RotorALT + SHIFT + RIGHT ARROWVoice Parameter RotorALT + SHIFT + LEFT ARROWNumbers RotorINSERT + 6Keyboard Voice RotorALT + SHIFT + TCapitalization Alert RotorINSERT + 4Format Alert ToggleINSERT + 5Auto Label GraphicsINSERT + GLabel Field NameCTRL + INSERT + TABSpeak All ToggleINSERT + SToggle All Voices (global)ALT + SHIFT + SAutodetect CursorCTRL + ALT + SHIFT + DReclassALT + INSERT + RRedrawINSERT + BACKSLASHMiscellaneous Screen Reader Hotkeys (continued)Shutdown ZoomText FusionINSERT + F4Dump OSMCTRL + SHIFT + INSERT + DLocator On/OffCTRL + SHIFT + LMove Mouse To ViewCTRL + SHIFT + BMove View To MouseCTRL + SHIFT + YTracking On/OffCTRL + ALT + SHIFT + TProgram InformationCTRL + ALT + SHIFT + PMouse HotkeysCommandsKeysCharacter PriorNUMPAD 4CharacterCTRL + INSERT + NUMPAD 5Character NextNUMPAD 6Word PriorINSERT + NUMPAD 4WordINSERT + NUMPAD 5Word NextINSERT + NUMPAD 6Line PriorNUMPAD 8LineWINDOWS + NUMPAD 5Line NextNUMPAD 2Clip PriorINSERT + NUMPAD 7ClipINSERT + NUMPAD 8Clip NextINSERT + NUMPAD 9Mouse Hotkeys (continued)Single Click Left ButtonNUMPAD SLASHSingle Click Right ButtonNUMPAD STARToggle Left ButtonINSERT + NUMPAD SLASHToggle Right ButtonINSERT + NUMPAD STARTop LeftNUMPAD 7Top RightNUMPAD 9Bottom LeftNUMPAD 1Bottom RightNUMPAD 3Mouse UpCTRL + SHIFT + NUMPAD 8Mouse DownCTRL + SHIFT + NUMPAD 2Mouse LeftCTRL + SHIFT + NUMPAD 4Mouse RightCTRL + SHIFT + NUMPAD 6PositionCTRL + INSERT + NUMPAD PLUSUnicode/AttributeALT + INSERT + FSearchCTRL + INSERT + FContinue SearchINSERT + F3Continue Search ReverseSHIFT + INSERT + F3Boundary RotorINSERT + RDrag and DropINSERT + NUMPAD DELETEInvisible/Mouse ToggleNUMPAD MINUSMouse to FocusINSERT + NUMPAD MINUSCursor to MouseINSERT + NUMPAD PLUSMouse Hotkeys (continued)Sync Invisible and MouseNUMPAD PLUSUp Down SpeakALT + NUMPAD 5Office HotkeysCommandsKeysLine NextALT + .Line PriorALT + ,Spelling/Grammar NextALT + 'Spelling/Grammar PriorALT + ;Revision NextALT + ]Revision PriorALT + [Cell RightINSERT + RIGHT ARROWCell LeftINSERT + LEFT ARROWCell UpINSERT + UP ARROWCell DownINSERT + DOWN ARROWTo First Cell of RowCTRL + INSERT + LEFT ARROWTo Last Cell of RowCTRL + INSERT + RIGHT ARROWTo First Cell of ColumnCTRL + INSERT + UP ARROWTo Last Cell of ColumnCTRL + INSERT + DOWN ARROWTo Top Left CellINSERT + HOMETo Bottom Right CellINSERT + ENDRowSHIFT + INSERT + DOWN ARROWOffice Hotkeys (continued)From Row StartSHIFT + INSERT + LEFT ARROWRow To EndSHIFT + INSERT + RIGHT ARROWFirst Row CellSHIFT + INSERT + UP ARROWColumnALT + INSERT + DOWN ARROWFrom Column StartALT + INSERT + LEFT ARROWColumn To EndALT + INSERT + RIGHT ARROWFirst Column CellALT + INSERT + UP ARROWCurrent CellINSERT + NUMPAD ENTERElement PropertiesINSERT + LPage NavigationINSERT + F7Headers and TotalsALT + SHIFT + HMonitor CellsALT + SHIFT + MMonitor Cell 1ALT + SHIFT + !Monitor Cell 2ALT + SHIFT + @Monitor Cell 3ALT + SHIFT + #Monitor Cell 4ALT + SHIFT + $Monitor Cell 5ALT + SHIFT + %Monitor Cell 6ALT + SHIFT + ^Monitor Cell 7ALT + SHIFT + &Monitor Cell 8ALT + SHIFT + *Monitor Cell 9ALT + SHIFT + (Monitor Cell 10ALT + SHIFT + )Office Hotkeys (continued)Any Monitor CellALT + SHIFT + ARead Total CellALT + SHIFT + ORead CommentCTRL + ALT + CRead FormulaCTRL + ALT + OPrevious CellALT + SHIFT + POutlook CalendarINSERT + WINDOWS + CBackground Reader HotkeysCommandsKeysBGR Read Clipboard TextCAPS LOCK + CBGR Read Selected TextCAPS LOCK + SBGR Play / PauseCAPS LOCK + ENTERBGR Restart (from the beginning)CAPS LOCK + BACKSPACEBGR Next SentenceCAPS LOCK + RIGHT ARROWBGR Current SentenceCAPS LOCK + SPACEBARBGR Previous SentenceCAPS LOCK + LEFT ARROWBGR Next WordCTRL + CAPS LOCK + RIGHT ARROWBGR Current WordCTRL + CAPS LOCK + SPACEBARBGR Previous WordCTRL + CAPS LOCK + LEFT ARROWBGR Show ToolbarCAPS LOCK + TBGR ExitCAPS LOCK + ESCCamera HotkeysCommandsKeysCamera Clarity On/OffALT + WINDOWS + CCamera Clarity ResetALT + WINDOWS + RCamera Manual Focus InCTRL + WINDOWS + RIGHT ARROWCamera Manual Focus On/OffCTRL + WINDOWS + MCamera Manual Focus OutCTRL + WINDOWS + LEFT ARROWCamera On/OffCTRL + WINDOWS + ENTERCamera ToolbarCTRL + WINDOWS + TCamera Two-Color On/OffALT + WINDOWS + SPACECamera Two-Color SchemeALT + WINDOWS + SCamera Zoom InCTRL + WINDOWS + UP ARROWCamera Zoom OutCTRL + WINDOWS + DOWN ARROWImageReader HotkeysCommandsKeysImageReaderALT + INSERT + IMagnification HotkeysCommandsKeysIncrease MagnificationALT + NUMPAD PLUSDecrease MagnificationALT + NUMPAD MINUSMagnifier Toolbar HotkeysCommandsKeysCursor Enhancements On/OffCTRL + SHIFT + RDesktop FinderCTRL + SHIFT + DFocus Enhancements On/OffCTRL + SHIFT + OFont Enhancements TypeCTRL + SHIFT + FFreeze Window On/OffCTRL + SHIFT + ENew Freeze WindowCTRL + SHIFT + NPointer Enhancements On/OffCTRL + SHIFT + PSmooth Panning On/OffALT + SHIFT + PText FinderCTRL + SHIFT + TView Mode On/OffCTRL + SHIFT + VWeb FinderCTRL + SHIFT + WWindow TypeCTRL + SHIFT + ZMiscellaneous Magnification HotkeysCommandsKeysSwitch Active ViewCTRL + QCapture ZoomText Fusion ScreenCTRL + ALT + SHIFT + CLocator On/OffCTRL + SHIFT + LMove Mouse To ViewCTRL + SHIFT + BMove View To MouseCTRL + SHIFT + YTracking On/OffCTRL + ALT + SHIFT + TProgram InformationCTRL + ALT + SHIFT + PReader Toolbar HotkeysCommandsKeysAppReaderALT + SHIFT + AAppReader from PointerALT + SHIFT + LEFT CLICKDocReaderALT + SHIFT + DMouse Echo ModeALT + SHIFT + MSay ClipboardALT + SHIFT + CSpeakIt ToolALT + SHIFT + IScroll HotkeysCommandsKeysJump CenterALT + WINDOWS + NUMPAD 5Jump DownALT + WINDOWS + PAGE DOWNJump LeftALT + WINDOWS + HOMEJump RightALT + WINDOWS + ENDJump UpALT + WINDOWS + PAGE UPRestore ViewALT + WINDOWS + NUMPAD STARSave ViewALT + WINDOWS + NUMPAD SLASHScroll DownALT + WINDOWS + DOWN ARROWScroll LeftALT + WINDOWS + LEFT ARROWScroll RightALT + WINDOWS + RIGHT ARROWScroll UpALT + WINDOWS + UP ARROWReading Zones HotkeysCommandsKeysEdit Reading ZonesCTRL + ALT + WINDOWS + EList Reading ZonesCTRL + ALT + WINDOWS + LNavigate Reading ZonesCTRL + ALT + WINDOWS + VNew Reading ZoneCTRL + ALT + WINDOWS + ZNext Reading ZoneCTRL + ALT + WINDOWS + NPrevious Reading ZoneCTRL + ALT + WINDOWS + PTrigger Zone 1CTRL + ALT + WINDOWS + 1Trigger Zone 2CTRL + ALT + WINDOWS + 2Trigger Zone 3CTRL + ALT + WINDOWS + 3Trigger Zone 4CTRL + ALT + WINDOWS + 4Trigger Zone 5CTRL + ALT + WINDOWS + 5Trigger Zone 6CTRL + ALT + WINDOWS + 6Trigger Zone 7CTRL + ALT + WINDOWS + 7Trigger Zone 8CTRL + ALT + WINDOWS + 8Trigger Zone 9CTRL + ALT + WINDOWS + 9Trigger Zone 10CTRL + ALT + WINDOWS + 0User Interface HotkeysCommandsKeysDisable ZoomText FusionALT + DELETEEnable ZoomText FusionALT + CAPS LOCKUser InterfaceCTRL + SHIFT + UConfiguration FilesNote: Custom configurations are presently not supported in ZoomText Fusion.All ZoomText Fusion settings can be saved and restored using configuration files. Configuration files control all ZoomText Fusion features, including magnification level, zoom window type, screen enhancements, reading options and hotkeys. Any number of files can be saved, allowing you to create custom ZoomText Fusion configurations that can be recalled at any time. To save settings to a configuration fileSet all ZoomText Fusion features as desired.In the File menu, choose Save Configuration…The Save Configuration dialog appears displaying the existing configuration files.Type the name of the new configuration in the File name box.Click on the OK button.To load settings from a configuration fileIn the File menu, choose Open Configuration…The Open Configuration dialog appears displaying the existing configuration files.Highlight the desired configuration file.Click on the Open button.The Default ConfigurationWhen you start ZoomText Fusion, the default configuration file, ZT.ZXC, is automatically loaded. This file contains the built-in defaults for all ZoomText Fusion settings. You can create your own default configuration, which will load your custom settings whenever ZoomText Fusion is run. Don't worry about losing the built-in settings – the original default file can be easily restored.To save a custom default configurationSet all ZoomText Fusion features as desired.In the File menu, choose Save As Default.Select Yes to overwrite the current default configuration.To restore the original default configuration fileIn the File menu, choose Restore Default.Select Yes to overwrite the current default configuration.Application SettingsNote: Application settings are presently not supported in ZoomText Fusion.Within each ZoomText Fusion configuration, you can define unique settings for each application that you use. For example, you can have ZoomText Fusion display your web browser at one magnification level and your word processor at another. When these applications become active, their application settings' are automatically restored. Applications for which settings have not been defined are displayed and spoken according to the default settings of the configuration file.To define and save application settingsOpen the application for which you want to define settings.Switch directly to ZoomText Fusion and select the settings you wish to use with that application.In the File menu, choose Save Application Settings.A dialog prompts you to save the application settings.Click the Yes button to save the application settings.At any time, you can disable or delete application settings. Disabled application settings remain in your configuration and may be re-enabled at any time. Deleted application settings are removed from your configuration.To disable or delete application settingsIn the File menu, choose Manage Application Settings…To disable application settings, uncheck the desired applications.To delete application settings, select the desired application, then select Delete Selected.Click on the OK button. ZoomText Fusion ScriptingZoomText Fusion’s scripting feature allows you to customize the behavior of ZoomText Fusion and other applications, providing more informative visual and audible feedback, as well as automation of tasks. Scripting allows you to work with improved speed and efficiency.Some of the many things you can do with ZoomText Fusion scripting are: automatically announce fields in a database or spreadsheet, new email items, new text that arrives in a chat window, and more meaningful descriptions of application controls and data.To learn more about ZoomText Fusion Scripting, see the “Scripting” section in the ZoomText Fusion online help system. To open ZoomText Fusion’s online help, in the Help menu, choose ZoomText Help.195770516548100021297902868295Phone:(802) 362-3612Fax:(802) 362-1670Email:sales@support@Mail:P.O. Box 669Manchester Center, VT 05255 USA00Phone:(802) 362-3612Fax:(802) 362-1670Email:sales@support@Mail:P.O. Box 669Manchester Center, VT 05255 USA ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download