Microsoft Windows 95 Resource Kit
Appendix D
MSBATCH.INF Parameters
Windows 95 Setup can be run with setup scripts to automate installation when you have defined the options and parameters to be installed on users’ computers.
Customization actions that required editing Windows 3.x INF files are all accomplished by means of statements in setup scripts that use MSBATCH.INF format.
In This Appendix
Setup Script Parameters
[Setup]
[System]
[NameAndOrg]
[InstallLocationsMRU]
[OptionalComponents]
[Network]
[netcard_ID]
[MSTCP]
[NWLink]
[NWRedir]
[NWServer]
[VRedir]
[VServer]
[Printers]
[Strings]
[Install]
MSBATCH.INF Sample File
Windows 95 Network Adapter INF Summary
Setup Script Parameters
This section summarizes the parameters that can be used in setup scripts.
Setup-Related Parameters
| | | |
|[Setup] parameters: | | |
|Devicepath |InstallType |TimeZone |
|EBD |PenWinWarning |Uninstall (with BackupDir) |
|Express |ProductID |Verify |
|InstallDir |SaveSUBoot |VRC |
|[System] parameters: | | |
|Display |Machine |PenWindows |
|DisplChar |Monitor |Power |
|Keyboard |Mouse |Tablet |
|Locale | | |
|[NameAndOrg] parameters: | | |
|Name |Org |Display |
|[InstallLocationsMRU] parameters: List of paths | | |
|[OptionalComponents] parameters: List of descriptions | | |
|[Printers] parameters: Printers to install | | |
Network-Related Parameters
| | | |
|[Network] parameters: | | |
|Clients |HDBoot |RPLSetup |
|ComputerName |IgnoreDetectedNetcards |Services |
|Description |NetCards |Security |
|DefaultProtocol |PassThroughAgent |ValidateNetcardResources |
|Display |Protocols |Workgroup |
|DisplayWorkstationSetup |RemoveBinding |WorkstationSetup |
|[netcard_ID] parameters: |Values from the INF file for the network adapter | |
|[MSTCP] parameters: | | |
|DHCP |Gateways |PrimaryWINS |
|DNS |Hostname |ScopeID |
|DNSServers |IPAddress |SecondaryWINS |
|Domain |IPMask |WINS |
|DomainOrder |LMHostPath | |
|[NWLink] parameters: |Frame_Type |NetBIOS |
|[NWRedir] parameters: |FirstNetDrive |ProcessLoginScript |
| |PreferredServer |SearchMode |
|[NWServer] parameters: |BrowseMaster |Use_SAP |
|[VRedir] parameters: |LogonDomain |ValidatedLogon |
|[VServer] parameters: |LMAnnounce |MaintainServerList |
The setup script parameters are not case-sensitive. They are also not required; if they don’t appear in a setup script, Windows 95 Setup just uses default values.
Display of most Setup dialog boxes can be disabled in the setup script so that users cannot change any setting. If the dialog boxes are not disabled, sources of information for parameters are given the following priority:
Information specified in the setup script
User input
Detection information
In this section, the descriptions for an option can contain any of six possible entries, as described in the following table.
|Entry |Description |
| |
|Parameter |The name of the parameter as it appears in a setup script |
|Values |The values that can be assigned to the parameter and what they mean |
|System policy |The name of the corresponding parameter for this entry in System Policy Editor; if |
| |no entry appears, there is no system policy |
|Default |The built-in value that is used if no other value is provided |
[Setup]
This section sets parameters for control of the Setup process.
Device Path
This parameter specifies whether Windows 95 should check a source installation path to find INF files, rather than looking only in the Windows INF directory when installing devices. If this parameter is set to 1, network administrators can later add INF files to a single source location to ensure that up-to-date drivers are installed any time a new device is installed on computers running Windows 95. However, set this value to 1 only if the installation source files are in a network directory (not floppy disks or CD).
Notice also that Devicepath=1 causes the entire INF database to be rebuilt each time a user changes a network component or changes drivers for any device.
|Parameter |Devicepath |
|Values |0 = Do not add a source directory path for INFs |
| |1 = Add the installation source directory to the path for finding INFs |
|Default |0 |
Emergency Startup Disk
This parameter specifies whether to create the emergency Startup Disk during Setup (the command-line override for this is /ie). For a setup script intended for hands-free installation, you might want to specify ebd=0 so that the user isn’t prompted to insert or remove the floppy disk. If you need to specify ebd=1, you can also add a reboot=0 entry, so that Setup will not attempt to restart the computer while the floppy disk is in the drive.
|Parameter |EBD |
|Values |0 = Do not create an emergency Startup Disk |
| |1 = Create an emergency Startup Disk |
|Default |1 |
Express
This parameter specifies whether the user can provide input during Setup. If express=1, then Windows 95 Setup uses only the settings specified in MSBATCH.INF or built-in defaults and does not ask the user to confirm or enter input. This setting disables most of the user interface for Setup.
|Parameter |Express |
|Values |0 = Allow user input |
| |1 = Run Setup using only values in MSBATCH.INF |
|Default |0 |
Install Type
This parameter specifies the type of installation for Windows 95 Setup.
|Parameter |InstallType |
|Values |0 = Compact |
| |1 = Typical |
| |2 = Portable |
| |3 = Custom |
|Default |1 |
Installation Directory
This parameter specifies the directory where Windows 95 is to be installed or, for shared installations, the machine directory.
|Parameter |InstallDir |
|Values |Directory name |
|Default |Windows directory, if present |
Pen Windows Warning
This parameter specifies whether to display a warning if an unknown version of Pen Windows is installed.
|Parameter |PenWinWarning |
|Values |0 = Do not display the warning |
| |1 = Display the warning |
|Default |1 |
Product ID
This parameter specifies the product ID for your site, which is printed on the Windows 95 compact disc or your Certification of Authenticity.
|Parameter |ProductID |
|Values |string |
|Default |none |
Save SUBOOT Directory
This parameter specifies whether to save the SUBOOT directory for Server-based Setup.
|Parameter |SaveSuBoot |
|Values |0 = Delete SUBoot directory |
| |1 = Save directory |
|Default |0 |
Time Zone
This parameter specifies the time zone to set on the computer.
|Parameter |TimeZone |
|Values |String enclosed in quotation marks, as described in the following list |
|Default |The time zone currently set on the computer |
|Time zone strings | | | |
| | | | |
|Afghanistan |Czech |Israel |Samoa |
|Alaskan |Dateline |Lisbon Warsaw |Saudi Arabia |
|Arabian |E. Europe |Mexico |South Africa |
|Atlantic |E. South America |Mid-Atlantic |Sydney |
|AUS Central |Eastern |Mountain |Taipei |
|Azores |Egypt |New Zealand |Tasmania |
|Bangkok |Fiji |Newfoundland |Tokyo |
|Canada Central |GFT |Pacific |US Eastern |
|Cen. Australia |GMT |Romance |US Mountain |
|Central |Greenwich |Russian |W. Europe |
|Central Asia |Hawaiian |SA Eastern |West Asia |
|Central Pacific |India |SA Pacific |West Pacific |
|China |Iran |SA Western | |
Uninstall
This parameter is used to specify whether Setup should create a compressed backup version of the existing Windows and MS-DOS directories to be used for automatically uninstalling Windows 95. If you specify Uninstall=5, you also must add a value for BackupDir=path that specifies the directory where Setup should place the compressed backup files.
|Parameter |Uninstall |
|Values |0 = Do not allow user to specify Uninstall options, and do not create |
| |backup files for uninstalling Windows 95 |
| |1 = Show Uninstall options for user to choose |
| |5 = Do not show Uninstall options, but automatically create backup |
| |files for uninstalling Windows 95 |
|Default |1 |
Verify
This parameter, provided principally for use by OEMs, specifies whether to run Setup in Verify mode.
Caution
This parameter is not the same as the MS-DOS verify command. Most users should not include this entry in a setup script. Setting Verify=1 will prevent Uninstall in all cases — even if Uninstall=5 in the setup script.
|Parameter |Verify |
|Values |0 = Do a full installation |
| |1 = Run Windows 95 Setup in Verify mode |
|Default |0 |
Version Checking
This parameter defines whether Windows 95 Setup will overwrite existing files automatically, even if the date of the local copy is later than the date for the file in the distribution source.
|Parameter |VRC |
|Values |0 = Prompt user to confirm before overwriting more recent files |
| |1 = Overwrite all without prompting for confirmation |
|Default |0 |
[System]
This section sets parameters for modifying the system settings.
Tip
The correct entries for MSBATCH.INF can be copied from similarly named entries in SETUPLOG.TXT for a computer on which Windows 95 has been installed with devices identical to those that you want to install from a setup script.
The following entries are based on INF section names:
Locale=INF_section_name in LOCALE.INF
Machine=INF_section_name in MACHINE.INF
PenWindows=INF_section_name in PENWIN.INF
Power=INF_section_name in MACHINE.INF or similar file (for advanced power management support)
Tablet=INF_section_name in PENDRV.INF or similar file
The following entries use INF descriptions. The choice must be in the list of compatible devices for that class.
Display=INF_description in MSDISP.INF or a similar file
For example, from the description %SuperVGA.DriverDesc%=SVGA for Super VGA, the entry in MSBATCH.INF would be display=svga.
Keyboard=INF_description in KEYBOARD.INF
Monitor=INF_section_name in MONITOR.INF
Mouse=INF_section_name in MSMOUSE.INF or a similar INF file
SelectedKeyboard=INF_section_name in MULTILNG.INF (specifies the keyboard layout)
Caution
If Express=1, you cannot add parameters to override safe detection for network adapters, SCSI controllers, or sound cards. This means that if the software detection process in Setup does not find peripheral hardware that is actually installed on the computer, then Setup will not run hardware detection to install support. In such cases, the user will have to use the Add New Hardware option in Control Panel to install support after Setup is complete.
You can force installation of certain hardware when Express=1 by adding specific entries in the [System] section to install support. Otherwise, specify Express=0 in MSBATCH.INF, and then during Setup you can manually specify hardware detection in the Analyzing Your Hardware dialog box.
Display Characteristics
This parameter sets the initial display characteristics.
|Parameter |DisplChar |
|Values |ColorDepth, x, y where: |
| |ColorDepth=bits per pixel |
| |x = horizontal resolution |
| |y = vertical resolution |
|Default |4,640,480 |
MultiLanguage
This parameter sets the type of multilanguage support installed for Windows 95.
|Parameter |MultiLanguage |
|Values |English = Installs support for English and Western European languages |
| |Greek = Adds additional support for Greek |
| |Cyrillic = Adds additional support for Cyrillic |
| |CE = Adds additional support for Eastern European languages |
|Default |English |
[NameAndOrg]
This section defines the name and organization for Windows 95 Setup, and specifies whether the user is to be shown the Name and Organization dialog box.
Name
This parameter specifies the full user name for this installation.
|Parameter |Name |
|Values |String |
|Default |None |
Organization
This parameter specifies the registered organization for this installation.
|Parameter |Org |
|Values |String |
|Default |None |
Display
This parameter specifies whether the Name and Organization dialog box appears during Windows 95 Setup.
|Parameter |Display |
|Values |0 = Do not display name and organization |
| |1 = Display name and organization |
|Default |1 |
[InstallLocationsMRU]
This section specifies the paths to add to the list of directories that the user can choose when Windows 95 Setup prompts for a path. For example, this section could appear as follows to specify local and network file locations:
[InstallLocationsMRU]
mru1=a:\
mru2=c:\
mru3=\\winserver\source
To force the path for files from which to copy, use CopyFile= and related statements in an [Install] section and specify the complete path for the component files.
[OptionalComponents]
This section contains the descriptions that appear in the Optional Components dialog box in Windows 95 Setup.
To create entries for this section, type the description enclosed in quotation marks. Each description is followed by 1 (install) or 0 (do not install). The strings that specify the optional components to install are defined in INF files.
Another way to define entries for this section is to copy the [OptionalComponents] section in SETUPLOG.TXT from a computer that already has all the optional components installed that you want defined in the setup script. For an example, the entries to install Briefcase and Net Watcher are as follows:
[OptionalComponents]
"Briefcase"=1
"Net Watcher"=1
The following lists show the strings for the optional components defined in the Windows 95 standard INF files. Additional strings can be defined by other application developers.
Optional Component Strings
| | | |
|Accessibility Options |Document Templates |Online User's Guide |
|Accessories |Flying Through Space |Paint |
|Audio Compression |Games |Phone Dialer |
|Backup |HyperTerminal |Quick View |
|Blank Screen |Jungle Sound Scheme |Robotz Sound Scheme |
|Briefcase |Media Player |Sample Sounds |
|Calculator |Microsoft Exchange |Screen Savers |
|CD Player |Microsoft Fax |Scrolling Marquee |
|Character Map |Microsoft Fax Services |Sound Recorder |
|Clipboard Viewer |Microsoft Fax Viewer |System Monitor |
|Communications |Microsoft Mail Services |System Resource Meter |
|Curves and Colors |Mouse Pointers |The Microsoft Network |
|Defrag |Multimedia |Utopia Sound Scheme |
|Desktop Wallpaper |Musica Sound Scheme |Video Compression |
|Dial-Up Networking |Mystify Your Mind |Volume Control |
|Direct Cable Connection |Net Watcher |Windows 95 Tour |
|Disk compression tools |Object Packager |WordPad |
|Disk Tools | | |
[Network]
This section specifies the parameters and options for installing networking components. The categories for these parameters include the following:
Installation parameters
Computer identification parameters
Shared installation parameters
Security parameters
User interface options
Installation Parameters in [Network]
Clients
This parameter specifies the network clients to be installed. It is a list of the device IDs used in the INF files. These IDs are not limited to those in the Windows 95 INF files (NETCLI.INF and NETCLI3.INF). A site that has an INF file from another vendor can use any device IDs listed in it. However, if you are installing a client other than those listed in the INF files provided with Windows 95, you need to obtain an updated Windows 95 INF file from your vendor.
If you are installing multiple clients, the first client in this list will start first whenever the computer is started.
Specify multiple networks in a comma-separated list. If the list contains two network clients, or lists multiple networks with a primary-only network (such as IBM® OS/2® LAN Server), Windows 95 Setup presents an error message and displays the Network Configuration properties for changing the selection. The verification process that occurs in Setup still takes place.
|Parameter |Clients |
|Values |Comma-separated list of client device IDs (see the following table) |
|Default |Defaults in NETDEF.INF |
The following table shows the valid device IDs for network clients as specified in NETCLI.INF and NETCLI3.INF (which are Windows 95 INF files).
|Device ID |Network |
| |
|lant5 |Artisoft® LANtastic® version 5.x and 6.x |
|netware3 |Novell® NetWare® version 3.x |
|netware4 |Novell NetWare version 4.x |
|nwredir |Microsoft Client for NetWare Networks |
|pcnfs50 |SunSoft® PC-NFS® version 5.x and greater |
|vines552 |Banyan® VINES® version 5.52 and greater |
|vredir |Client for Microsoft Networks |
Network Card Drivers
This parameter specifies the drivers to be installed for network adapters as a list of the device IDs used in the INF files. These IDs are not limited to those included in the Windows 95 INF files. A site that has an INF file from another vendor can use any device IDs listed in that file.
Important
In general, it is recommended that you rely on detection in Windows 95 Setup to install the correct driver and define the correct configuration settings.
When a network adapter is listed, the usual verification takes place. Windows 95 Setup chooses an NDIS 3.1 driver, if available; otherwise, it uses an NDIS 2.x driver.
|Parameter |NetCards |
|Values |Comma-separated list of network adapter device IDs |
|Default |Results of detection |
For example, the following entries would install drivers for Intel® EtherExpress™ 16 or 16TP plus 3Com EtherLink II or IITP:
netcards=*PNP812D,*PNP80F3
Ignore Detected NetCards
This parameter specifies whether Setup will use the detected information to configure network adapters or use values specified by the netcards= parameter in the setup script.
|Parameter |IgnoreDetectedNetCards |
|Values |0 = Do not ignore detected adapters |
| |1 = Ignore the detected network adapters and use the values specified for |
| |NetCards=deviceID |
|Default |0 |
Protocols
This parameter specifies the protocols to be installed as a list of the device IDs used in the INF files. These IDs are not limited to those in the Windows 95 INF files. A site that has an INF file from another vendor can use any device IDs listed in that file.
Note
If you are installing a protocol other than those listed in the INF files provided with Windows 95, you need to get an updated Windows 95 INF file from your vendor.
Setup verifies these settings, so it is possible to specify only the network clients and let Windows 95 Setup choose the protocols. For example, if you specify Clients=pcnfs50, then Windows 95 Setup adds NFSLINK.
|Parameter |Protocols |
|Values |Comma-separated list of protocol device IDs, as described in the following table |
|Default |Defaults in NETDEF.INF |
The valid device IDs for protocols in the Windows 95 INF file (NETTRANS.INF) are the following.
|Device ID |Protocol |
| |
|dec40 |DECnet™ version 4.1 Ethernet protocol |
|dec40t |DECnet version 4.1 token ring protocol |
|dec50 |DECnet version 5.0a Ethernet protocol |
|dec50t |DECnet version 5.0a token ring protocol |
|ipxodi |Novell-supplied IPXODI protocol |
|msdlc |Microsoft DLC (real mode) |
|mstcp |Microsoft TCP/IP |
|ndisban |Banyan VINES NDIS Ethernet protocol |
|ndtokban |Banyan VINES NDIS token-ring protocol |
|netbeui |Microsoft NetBEUI |
|nfslink |Sun PC-NFS protocol |
|nwlink |IPX/SPX-compatible protocol |
|nwnblink |NetBIOS support for IPX/SPX-compatible protocol |
Default Protocol
This parameter sets the default protocol (which is assigned LANA 0), which is the specified protocol bound to the specified network adapter (if the computer has more than one network adapter). If no adapter is specified, the default is the first instance of the specified protocol. Set this value if, for example, the computer will run software that requires a protocol to be bound to LAN adapter (LANA) 0, which can only be defined by setting that protocol as the default protocol.
If netbios=1, you must set defaultprotocol=nwnblink if you want to specify IPX/SPX-compatible protocol as the default.
|Parameter |DefaultProtocol |
|Values |A protocol device ID as defined in protocol= and, optionally, a network adapter |
| |device ID, as defined in netcards=. |
|Default |0 |
The folowing example sets the default protocol as an instance of NetBEUI bound to a particular adapter:
DefaultProtocol=netbeui,*pnp812d
Remove Binding
This parameter removes the binding between the two devices. This parameter is used to tune bindings in a setup script.
|Parameter |RemoveBinding |
|Values |Comma-separated list of device IDs |
|Default |None |
Services
This parameter specifies the network services to be installed as a list of the device IDs used in the INF files. These IDs are not limited to those in the Windows 95 INF files. A site that has an INF file from another vendor can use any device IDs listed in that file. When a service is listed in a setup script, the usual verification still takes place.
The only service installed by default is VSERVER (File and Printer Sharing for Microsoft Networks) if peer sharing services were enabled for Windows for Workgroups.
|Parameter |Services |
|Values |Comma-separated list of service device IDs, as described in the following table |
|Default |Windows 95 Setup defaults, depending on the value of InstallType |
The following shows the valid device IDs defined in several different INF files.
|Device ID |Service |INF file |
| | | |
|bkupagnt |Arcada® Backup Exec agent |BKUPAGNT.INF |
|cheyagnt |Cheyenne® ARCserve agent |CHEYENNE.INF |
|jadm |HP® Network Printer service for Microsoft |HPNETPRN.INF |
|janw |HP Network Printer service for NetWare |HPNETPRN.INF |
|nmagent |Microsoft Network Monitor agent1 |NMAGENT.INF |
|nwserver |File and Printer Sharing for NetWare Networks |NETSRVR.INF |
|pserver |Microsoft Print Service for NetWare Networks1 |MSPSRV.INF |
|remotereg |Microsoft Remote Registry service1 |REGSRV.INF |
|snmp |Microsoft SNMP agent1 |SNMP.INF |
|vserver |File and Printer Sharing for Microsoft Networks |NETSRVR.INF |
| | | |
|1 Available in the ADMIN directory of the Windows 95 compact disc. | | |
Computer Identification Parameters in [Network]
Computer Name
This parameter sets the computer’s network name.
|Parameter |ComputerName |
|Values |String of up to 15 alphanumeric characters and no blank spaces. The name must be |
| |unique on the network and can contain the following special characters: |
| |! @ # $ % ^ & ( ) - _ ' { } . ~ |
|Default |Generated from the first eight characters of the user name |
Description
This parameter is the description for the computer (mainly used by peer servers such as File and Printer Sharing for Microsoft Networks).
|Parameter |Description |
|Values |48 characters long, containing no commas |
|Default |User name from licensing information |
Workgroup
This parameter sets the workgroup for the computer.
|Parameter |Workgroup |
|Values |String of up to 15 alphanumeric characters and no blank spaces. The name must be |
| |unique on the network and can contain the following special characters: |
| |! @ # $ % ^ & ( ) - _ ' { } . ~ |
|System policy |Workgroup settings (under policies for Microsoft Client for Windows Networks) |
|Default |Workgroup previously specified; otherwise, a new name is generated from user |
| |licensing information by taking the first 15 characters of the organization name. |
| |For example, an organization name of “Microsoft Corporation” results in |
| |“MicrosoftCorpo” as the default workgroup. |
Shared Installation Parameters in [Network]
Hard Disk Boot
This parameter specifies whether, for a client computer running a shared copy of Windows 95 from a server, Setup should configure Windows 95 so that it starts from the hard disk but runs from a shared network copy.
|Parameter |HDBoot |
|Values |0 = Start from the server or floppy disk if WorkstationSetup=1 |
| |1 = Start from the hard disk and run from the network |
|Default |0 |
The following table shows the settings for this parameter and the RPLSetup parameter, depending on how the computer runs Windows 95.
|Windows 95 location |HDBoot |RPLSetup |
| | | |
|Hard-disk boot, Windows 95 on a server |1 |0 |
|Floppy-disk boot, Windows 95 on a server |0 |0 |
|Remote boot, Windows 95 on a server |0 |1 |
Remote-Boot (RPL) Setup
This parameter specifies that Setup should create a disk image on the network server for a remote-boot workstation during Workstation Setup. This parameter is ignored if a corresponding Workstation Setup value is not defined. (Therefore, setting RPLSetup=1 does not automatically set WorkstationSetup=1.)
|Parameter |RPLSetup |
|Values |0 = Don’t do a remote-boot setup |
| |1 = Do a remote-boot setup if WorkstationSetup=1 |
|Default |0 |
Workstation Setup
This parameter specifies whether Setup configures a client computer to run Windows 95 locally or as a shared copy from a server. If this parameter is set to No (0), Windows 95 Setup runs normally. If this parameter is set to Allow (1) and if Setup is running from a server, Setup asks if the user wants to install Windows 95 as a shared copy or on the local hard disk. See the table for the HDBoot parameter earlier in this section.
|Parameter |WorkstationSetup |
|Values |0 = Allow a standard setup (local files) |
| |1 = Allow a shared workstation setup (run from a server) |
|Default |0 |
Display Workstation Setup
This parameter specifies whether the Setup user interface appears during installation of Windows 95 on a workstation that will run a shared copy of Windows 95. Setting this value to 0 forces the value defined for WorkstationSetup in the script.
|Parameter |DisplayWorkstationSetup |
|Values |0 = Do not display user interface |
| |1 = Display user interface |
|Default |0 |
Security Parameters in [Network]
User Security
This parameter specifies the security model to be used and, for user-level security, the type of pass-through agent (that is, server or domain). A client with a security provider must be installed for these values to have an effect.
|Parameter |Security |
|Values |share = share-level security |
| |nwserver = user-level security, validated by a NetWare server |
| |domain = user-level security, validated by a Windows NT domain |
| |msserver = user-level security, validated by a computer running |
| |Windows NT Workstation |
|System policy |User-level Access Control settings (under policies for Access Control) |
|Default |share |
Pass-Through Agent
This parameter specifies the pass-through agent for user-level security. This value is ignored in share-level security.
|Parameter |PassThroughAgent |
|Values |Server or domain name |
|System policy |User-level Access Control settings (under policies for Access Control) |
|Default |No value, or the value of Workgroup if Security=domain, Preferred Server if |
| |Security=nwserver, or none. The default is the value of PreferredServer if |
| |Security=nwserver; otherwise, there is no default. |
User Interface Options for [Network] Parameters
Display
This parameter controls whether any of the Network Configuration dialog boxes appear in Custom Setup.
|Parameter |Display |
|Values |0 = Do not display |
| |1 = Display |
|Default |1 |
Validate NetCard Resources
This parameter specifies whether to display a dialog box to resolve resource conflicts if a partial configuration is detected or if there is an IRQ conflict for a network adapter.
|Parameter |ValidateNetCardResources |
|Values |0 = Do not display a wizard page |
| |1 = Display a wizard page to resolve resource conflicts |
|Default |1 |
[netcard_ID]
The actual name for this section is the identifier for the network adapter, as defined in the related INF file. This section sets parameters for a specific network adapter, as defined in the [netcard.NDI] sections of the network device INF files provided with Windows 95.
Important
In general, it is recommended that you rely on detection in Windows 95 Setup to install the correct driver and define the correct configuration settings.
All entries for a [netcard_ID] section depend on the specific adapter. The actual parameters and settings for a specific network adapter can be found in that adapter’s INF file in the Windows INF directory.
To locate settings for a network adapter, check NET.INF for entries such as the following:
CardBrand=brand of network adapter
INFFile=file where these settings can be found
In the related INF file for the specific network adapter, search for the adapter’s name. For example, you might find the following entry for an Intel EtherExpress 16 network adapter:
;*********************************************************************
; *PNP812D Intel Etherexpress 16 or 16TP
;*********************************************************************
The information in the netcard.INF file is followed by the specific settings, using this format:
;netcard model name
[adapter.NDI]
actual settings for adapter
For example, for the adapter in the previous example, the following entry appears in the NETEE16.INF file:
[*PNP812D.ndi]
AddReg=*pnp812d.ndi.reg,EXP16.ndi.reg
Based on the AddReg= entry in this statement, you need to search for the [*pnp812d.ndi.reg] or [EXP16.ndi.reg] sections in the INF file to find the parameters required for a particular adapter. For example, for the related Intel EtherExpress adapter, the following sections appear in NETEE16.INF:
[*PNP812D.ndi.reg]
.
.
.
HKR,NDI\params\Interrupt,resc,1,04,00,00,00
HKR,NDI\params\IOAddress,resc,1,02,00,00,0
HKR,NDI\params\DMAChannel,ParamDesc,,"DMA Channel"
These entries describe the parameters that can be specified for the adapter in a setup script. Further, in this same part of the netcard.INF file, the statements also indicate the kinds and ranges of values that can be specified for a particular parameter. For example, in NETEE16.INF, the following statements indicate that for DMAChannel= you must specify an integer in the range of 1 – 3, where the default value is 1:
HKR,NDI\params\DMAChannel,type,,int
HKR,NDI\params\DMAChannel,default,,1
HKR,NDI\params\DMAChannel,min,,1
HKR,NDI\params\DMAChannel,max,,3
The following entry in NETEE16.INF indicates that for Transceiver= you can specify the values external or onboard (based on the first string that appears after the enum item):
HKR,NDI\params\Transceiver,default,,onboard
HKR,NDI\params\Transceiver,type,,enum
HKR,NDI\params\Transceiver,enum,external,,external
HKR,NDI\params\Transceiver,enum,onboard,,onboard
Based on the previous examples, the following shows an example of the [netcard] section you would add to MSBATCH.INF to set parameters for an Intel EtherExpress 16 or 16TP network adapter:
[*PNP812D]
Interrupt=
IOAddress=
DMAChannel=2
Transceiver=external
Notice that you only need to set values for the parameters where you do not want to use the defaults.
[MSTCP]
This section sets parameters for Microsoft TCP/IP.
DHCP
This parameter specifies whether TCP/IP is configured to use DHCP for dynamic TCP/IP configuration.
|Parameter |DHCP |
|Values |0 = Don’t enable DHCP |
| |1 = Enable DHCP |
|Default |1 |
DNS
This parameter enables DNS name resolution. You must also set DNS=1 if you plan to use LMHOSTS for name resolution.
|Parameter |DNS |
|Values |0 = Disable DNS |
| |1 = Enable DNS |
|Default |0 |
DNS Servers
This parameter is a list of the DNS servers to use in the order to try them.
|Parameter |DNSServers |
|Values |Comma-separated list of DNS server names |
|Default |None |
Domain
This parameter sets the DNS domain that this computer is in.
|Parameter |Domain |
|Values |String |
|Default |None |
Domain Order
This parameter sets a list of DNS domains for host name resolution in the order to try them.
|Parameter |DomainOrder |
|Values |Comma-separated list of DNS domains |
|Default |None |
Gateways
This parameter lists the IP gateways (sometimes called IP routers) in the order they are to be used.
|Parameter |Gateways |
|Values |Comma-separated list of IP addresses |
|Default |None |
Hostname
This parameter sets the DNS hostname for this computer (usually the same value as ComputerName).
|Parameter |Hostname |
|Values |String |
|Default |None |
IP Address
This parameter sets the computer’s IP address if DHCP is not enabled.
|Parameter |IPAddress |
|Values |Internetwork Protocol (IP) address (###.###.###.###) |
|Default |None |
LMHOST File Path
This parameter sets the path and filename of the LMHOST file.
|Parameter |LMHOSTPath |
|Values |Path |
|Default |None |
Primary WINS Server
This parameter sets the primary WINS name server.
|Parameter |PrimaryWINS |
|Values |IP address (###.###.###.###) |
|Default |None |
Secondary WINS Server
This parameter sets the secondary WINS name server.
|Parameter |SecondaryWINS |
|Values |IP address (###.###.###.###) |
|Default |None |
Scope ID
This parameter sets the scope ID.
|Parameter |ScopeID |
|Values |String |
|Default |None |
Subnet Mask
This parameter sets the IP subnet mask for TCP/IP if DHCP is not enabled.
|Parameter |IPMask |
|Values |IP address (###.###.###.###) |
|Default |None |
WINS
This parameter enables WINS for NetBIOS computer name resolution.
|Parameter |WINS |
|Values |0 = Disable WINS |
| |1 = Enable WINS resolution |
| |DHCP = Enable WINS but get parameters from DHCP server |
|Default |1 |
[NWLink]
The parameters in this section specify settings for the IPX/SPX-compatible protocol and are valid only if protocols=nwlink is also specified in the setup script.
Frame Type
This parameter specifies the default frame type for IPX.
|Parameter |Frame_Type | |
|Values |0 = 802.3 |4=Auto |
| |1 = 802.2 |5=Token ring |
| |2 = Ethernet II |6=Token ring SNAP |
|Default |4 | |
NetBIOS
This parameter specifies whether NetBIOS support for IPX/SPX should be installed.
|Parameter |NetBIOS |
|Values |0 = Don’t install NWNBLINK |
| |1 = Install NWNBLINK |
|Default |0 |
[NWRedir]
First Network Drive
This parameter specifies the first network drive to which to attach in login scripts for Client for NetWare Networks. This parameter overrides the equivalent setting in NET.CFG.
|Parameter |FirstNetDrive |
|Values |Drive letter (“A” or “A:” are equivalent) |
|Default |F: |
Preferred Server
This parameter specifies the NetWare preferred server. This parameter does not override the equivalent setting in NET.CFG.
|Parameter |PreferredServer |
|Values |String |
|System policy |Preferred Server settings (under policies for Microsoft Client for NetWare Networks)|
|Default |None |
Process Login Script
This parameter specifies whether login script processing is enabled when running Microsoft Client for NetWare Networks.
|Parameter |ProcessLoginScript |
|Values |0 = Disable login script processing |
| |1 = Enable login script processing |
|Default |1 |
Search Mode
This parameter specifies the NetWare search mode. The values correspond exactly to the values specified in NET.CFG for Novell NetWare.
|Parameter |SearchMode |
|Values |0 – 7 |
|System policy |Search Mode settings (under policies for Microsoft Client for NetWare Networks) |
|Default |0 |
[NWServer]
Browse Master
This parameter specifies whether a computer configured with File and Printer Sharing for NetWare Networks can be elected browse master.
|Parameter |BrowseMaster |
|Values |0 = This computer cannot be a browse master |
| |1 = This computer can be a browse master |
| |2 = This computer is the preferred browse master |
|Default |1 |
SAP Browsing
This parameter specifies whether a computer configured with File and Printer Sharing for NetWare Networks uses Server Advertising Protocol (SAP) browsing. Enabling SAP browsing allows a computer with File and Printer Sharing for NetWare Networks to be seen by any NetWare client, but the computer does not appear in a workgroup in Network Neighborhood.
|Parameter |Use_SAP |
|Values |0 = Disable SAP browsing (use workgroup style browsing) |
| |1 = Use SAP style browsing |
|Default |0 |
[VRedir]
Validated Logon
This parameter specifies whether logons are validated on a Windows NT domain. If you set this value to 1, be sure to specify a value for LogonDomain.
|Parameter |ValidatedLogon |
|Values |0 = Don’t validate logons |
| |1 = Validate logon |
|Default |0 |
Logon Domain
This parameter specifies the Windows NT domain to use for logon validation. It can be set even if ValidatedLogon=0. If ValidatedLogon=1, you must set a correct value for LogonDomain to ensure that Windows 95 Setup has access to any required files on a protected network resource, and to ensure that the user can log on successfully when installation is completed.
|Parameter |LogonDomain |
|Values |String |
|System policy |Log on to Windows NT settings (under policies for Microsoft Client for Windows |
| |Networks) |
|Default |Value of Workgroup in [Network] |
[VServer]
Announce
This parameter specifies whether the computer configured with File and Printer Sharing for Microsoft Networks announces its presence to LAN Manager computers on the network. Setting this value to 1 increases network traffic but makes browsing faster.
|Parameter |LMAnnounce |
|Values |0 = Don’t announce VSERVER to the network |
| |1 = Announce VSERVER to network |
|Default |1 |
Browse Master
This parameter specifies how the computer configured with File and Printer Sharing for Microsoft Networks behaves in a browse master election.
|Parameter |MaintainServerList |
|Values |0 = Disabled (this computer cannot be a browse master) |
| |1 = Enabled (this computer is the browse master) |
| |2 = Auto (the computer can be a browse master if required) |
|Default |2 |
[Printers]
This section is used to install one or more printers during Setup by specifying a user-defined name for identifying the printer, the model name, and the printer port. Each printer to be installed has a separate entry in this section using the following syntax:
PrinterName=DriverModel,Port
The following restrictions apply:
The length of the friendly name for the printer name cannot exceed 32 bytes (31 characters plus a NULL character). If the name specified in the custom setup script is too long, Setup will truncate it to fit the requirement.
The model name must be recognized by Windows 95. You can see the list of supported printer models in the Add Printers wizard or in the printer INF files.
No commas or quotation marks can be used in any string.
Note
If the setup script contains a [Printers] section with no entries, the user will not be asked to select a printer the first time that Windows 95 runs.
Friendly Name
This parameter specifies the friendly name, model, and port for a printer to be installed. The printer’s friendly name is the name that appears in the Printers folder. The model name must be the exact name of a printer driver that is supported under Windows 95; otherwise, Setup skips this entire section.
|Parameter |PrinterName= any string that does not contain these characters: |
| |\ , ; = |
|Values |DriverModel = The exact driver name for any printer model supported under Windows 95|
| |Port = The port that this printer is attached to (such as LPT1) or a UNC path name |
| |to a network print queue |
|Default |None |
The following example installs a local printer and a network printer:
[Printers]
"My BJC600"="Canon Bubble-Jet BJC-600",LPT1
"IIIsi Next Door"="HP Laserjet IIIsi",\\Server_1\PrtShr_1
[Strings]
The [Strings] section defines one or more string keys that Setup expands to the defined string and uses it for further processing. In other sections, a strings key can be used by enclosing it in percent signs (%).
|Parameter |String_Key = Value |
|Values |String_Key = A unique name made up of letters and digits. |
| |Value = Letters, digits, or other printable characters. It should be enclosed in |
| |quotation marks if the corresponding string key is used in an entry that requires |
| |double quotation marks. |
The following shows three examples of strings keys:
[Strings]
MSFT="Microsoft"
M1="APEX DRIVERS"
DevDesc1=APEX DRIVERS SCSI II Host Adapter
[Install]
The [Install] section sets parameters for copying additional files as part of Windows 95 installation. The format for this section is identical to the format for the [Install] section in general INF files.
The following sections provide these examples for using the [Install] section for custom installations:
Installing custom bitmaps and shortcuts
Enabling user profiles and remote administration
Replacing configuration entries
[Install] Example: Copying Custom Files
This section describes MSBATCH.INF entries for copying custom files while installing Windows 95. In the following example, custom files are copied for a bitmap file containing a corporate logo plus a shortcut to be placed in Network Neighborhood. These custom files must be created by the administrator and placed with the Windows 95 source files on the network.
[install]
CopyFiles=newfiles.Copy
[NEWFILES.Copy]
my_corp.bmp ; bitmap file
my_link.lnk ; file that contains the shortcut
[DestinationDirs]
newfiles.copy=25 ; shared Windows directory
The statement in [DestinationDirs] specifies where files are to be copied. Common values include the following for shared installations:
10 = machine directory
11 = Windows SYSTEM directory
25 = Windows directory
Notice that the most flexible means of providing custom links for multiple users is to use system policies.
[Install] Example: Enabling User Profiles and Remote Administration
If you plan to take advantage of user profiles and to allow administration of remote computers, you can enable these capabilities using setup scripts. The following entries are required in MSBATCH.INF to enable these features.
[Install]
AddReg=User.Profiles,Remote.Admin
[User.Profiles]
HKLM,"Network\Logon","UserProfiles",1,1
[Remote.Admin]
HKLM,"Security\Access\Admin\Remote",%Server_Domain_Username%,1,ff,00
[Network]
Security=domain_or_server ;enables user-level security
PassThroughAgent=provider_name
services=remotereg ;installs the Microsoft Remote Registry agent
[strings]
; specifies the server containing the group or individual account
; to be allowed remote administration capabilities
Server_Domain_Username = "server_or_domain\account"
To define the custom values required for enabling remote administration
1. To enable user-level security, set the appropriate values in the [Network] section for Security= and PassThroughAgent=.
For example, on a NetWare network, if the security provider is a server named NWSVR1:
Security=server
PassThroughAgent=NWSVR1
On a Windows NT network, if the security provider is a domain named NTDOM1:
Security=Domain
PassThroughAgent=NTDOM1
2. In the [Strings] key, define the value for %server_domain_username% to specify the location for the list of user accounts, plus the names of accounts for users who will be allowed remote administration capabilities for this particular computer.
For example, for a NetWare network, the following specifies the server containing the group or individual account, plus the account name to be given remote administration capabilities:
Server_Domain_Username = "NWSVR\HELPDESK"
For a Windows NT network, the following specifies the domain containing the account, plus the account name to be given remote administration capabilities:
Server_Domain_Username = "NTDOM1\ADMIN"
Important
You must also make sure that the related files supporting Microsoft Remote Registry services are installed with the Windows 95 source files.
When you enable remote administration in this way, Setup automatically adds the appropriate Administrators account (including Supervisor and Domain Administrators under Windows NT) to the list of persons or groups allowed to administer the computer remotely, and sets the permissions required for remote administration.
Enabling user profiles in a setup script is equivalent to selecting the items in the Passwords option in Control Panel named Users Can Customize Their Preferences And Desktop Settings and Include Desktop Icons And Network Neighborhood Settings.
To enable group policies
If you want to enable group policies for both the Client for Microsoft Networks and Client for NetWare networks, add the following entries to MSBATCH.INF:
[Install]
Addreg=User.Profiles.Reg, Group.Policies.Reg
Copyfiles=Group.Policies.Copy
[User.Profiles.Reg]
HKLM,Network\Logon,UserProfiles,1,1
[Group.Policies.Reg]
HKLM,Network\Logon,PolicyHandler,,"GROUPPOL.DLL,ProcessPolicies"
HKLM,System\CurrentControlSet\Services\MSNP32\NetworkProvider,
GroupFcn,,"GROUPPOL.DLL,NTGetUserGroups"
HKLM,System\CurrentControlSet\Services\NWNP32\NetworkProvider,
GroupFcn,,"GROUPPOL.DLL,NWGetUserGroups"
[Group.Policies.Copy]
grouppol.dll
[DestinationDirs]
Group.Policies.Copy = 11
[Install] Example: Replacing Configuration Entries
This section presents some sample entries for replacing entries in configuration files as part of Windows 95 Setup.
Depending on the common network configuration at your site, you may determine that you need to remove a line from one or more configuration files as a global procedure before starting Windows 95 Setup. For example, you may want to use a protected-mode protocol such as Microsoft TCP/IP instead of the real-mode version of TCP/IP currently being using on the target computers. The following kinds of entries can be used to make these changes during the installation process.
Note
If you want to remove TSRs when installing Windows 95 on a NetWare network, you should modify the NETDET.INI file rather than making modifications using MSBATCH.INF.
[Install]
UpdateInis=update_prot.Ini
UpdateCfgSys=Update_config.sys
UpdateAutoBat=Update_autoexec.bat
[Update_prot.Ini]
system.ini,386enh,"device=mytcp.386"
[Update_config.sys]
[Update_autoexec.bat]
MSBATCH.INF Sample File
This section shows a sample setup script.
[Setup]
Express=0 ; allows user input
InstallType=1 ; Typical Setup
EBD=1 ; create startup disk
InstallDir=C:\WINDOWS
Verify=0
PenWinWarning=1
ProductID=999999999
[NameAndOrg]
Name="User One"
Org="Your Company Name"
Display=1 ; User Information dialog box is displayed
[OptionalComponents]
"Accessories"=1
"Communications"=1
"Disk Tools"=1
"Multimedia"=1
"Screen Savers"=0
"Disk compression tools"=1
"Paint"=1
"HyperTerminal"=1
"Defrag"=1
"Blank Screen"=1
"Scrolling Marquee"=1
"Calculator"=1
"Object Packager"=1
"Backup"=0
"Phone Dialer"=1
"Clipboard Viewer"=0
"Microsoft Fax"=0
"Microsoft Fax Services"=0
"Microsoft Fax Viewer"=0
"Accessibility Options"=0
"The Microsoft Network"=0
"Audio Compression"=0
"Video Compression"=1
"Sound Recorder"=0
"Volume Control"=0
"Media Player"=1
"Microsoft Exchange"=0
"Microsoft Mail Services"=0
"Briefcase"=0
"Document Templates"=1
"WordPad"=1
"Dial-Up Networking"=0
"Direct Cable Connection"=0
"Mouse Pointers"=0
"Windows 95 Tour"=0
"Online User's Guide"=0
"Desktop Wallpaper"=0
"System Monitor"=0
"Net Watcher"=0
"Character Map"=0
"Curves and Colors"=0
"Mystify Your Mind"=0
"Flying Through Space"=0
"Games"=0
"Quick View"=0
"Sample Sounds"=0
"Musica Sound Scheme"=0
"Jungle Sound Scheme"=0
"Robotz Sound Scheme"=0
"Utopia Sound Scheme"=0
"CD Player"=0
[System]
"Display"="Tseng Lans ET4000"
"Keyboard"="Standard 101/102-Key or Microsoft Natural Keyboard"
"Machine"="MS_CHICAGO"
"Monitor"="NEC MultiSync 2A"
"Mouse"="Standard Serial Mouse"
"Power"="No APM"
"Locale"="L0409"
"UI Choice"="Win95UI"
"Multilanguage"="English"
[InstallLocationsMRU]
MRU1=C:\WINDOWS
MRU2=C:\User
MRU3=\\win_svr\source files\home_dir
[Network]
Display=0 ; Network Options do not appear in Setup
ComputerName=W95_1
Workgroup=test_group
Description="This is a lab test computer"
Clients=vredir,nwredir
Security=Domain
PassThroughAgent=Test_domain
WorkstationSetup=0 ; not a shared installation of Windows 95
HDBoot=1
[VREDIR]
ValidatedLogon= 1
LogonDomain=test_domain
Windows 95 Network Adapter INF Summary
This section presents details about the settings for common network adapters, as defined in the [netcard.NDI] sections of the INF files provided with Windows 95. Other adapters are also listed; their settings can be found in the appropriate file in the Windows INF directory. The NET.INF file contains the master information for detecting and configuring network adapters. The specific INF files for network adapters include the following:
|net3com.inf |netcpq.inf |netnice.inf |netsmc.inf |
|netamd.inf |netgen.inf |netnovel.inf |netsmctr.inf |
|netflex.inf |nethp.inf |netoli.inf |nettcc.inf |
|netcable.inf |netibm.inf |netppp.inf |nettulip.inf |
|netdec.inf |netmadge.inf |netprot.inf |netub.inf |
|netee16.inf |netncr.inf |netracal.inf |netxir.inf |
3COM
Cardbrand=3COM
INFFile=NET3COM.INF
[*PNP80F3]
Interrupt=
IOAddress=
DMAChannel=
MaxTransmits=
DataTransfer=
XmitBufs=
Transceiver=
The following adapters also have settings in the file NEC3COM.INF:
|3Com EtherLink Plus® |NCR StarCard |
|3Com EtherLink III® |NCR® WaveLAN AT |
|NCR Token-Ring 4 Mbs ISA |TokenLink |
|NCR Token-Ring 16/4 Mbs ISA | |
Digital Equipment Corporation
Cardbrand=Digital Equipment Corp.
INFFile= NETDEC.INF
;DEC DE201 Etherworks Turbo TP
[*PNP80EB]
Interrupt=
IOAddress=
RamAddress=
MaxMulticasts=
Maxtransmits=
AdapterName=
The following adapters also have settings in the file NETDEC.INF:
|DEC (DE211) Etherworks® MC/TP |DEC (DE102) Etherworks LC/TP_BNC |
|DEC (DE212) Etherworks MC/TP_BNC |DEC EE101 (Built-In) |
|DEC (DE100) Etherworks LC |DECpc 433 WS (Built-In) |
|DEC (DE200) Etherworks Turbo |DEC Ethernet (All Types) |
|DEC (DE101) Etherworks LC/TP |DEC (DE210) Etherworks MC |
|DEC (DE202) Etherworks Turbo/TP_BNC | |
IBM
Cardbrand=IBM
INFFile= NETIBM.INF
;IBM Token Ring
[*PNP80C9]
MaxTransmits=
Primary
Alternate=
RecvBufs=
XmitBufs=
MaxPacketSize=
ProductID=
NetworkAddress=
Iobase=
RecvBufSize=
XmitBufSize=
The following adapters also have settings in the file NETIBM.INF:
|IBM Token Ring 4/16Mbs | |
|IBM Token Ring II/Short | |
|IBM Token Ring (All Types) | |
Intel
Cardbrand=Intel
INFFile= NETEE16.INF
;Intel Etherexpress 16 or 16TP
[*PNP812]
IOBaseAddress=
IRQ=
IOAddress=
Transceiver=
IOChrdy=
IOChannelReady=
The following adapters also have settings in the file NETEE16.INF:
|Intel EtherExpress PRO | |
|Generic 595 | |
|Intel EtherExpress 16 (MCA) | |
MADGE
Cardbrand=MADGE
INFFile= NETMADGE.INF
;Madge Networks Smart 16/4 PC Ringnode
[*PNP81D7]
RxTxSlots=
NetworkAddress=
MaxFrameSize=
RxBufferSize=
TxBufferSize=
MaxTransmits=
Watchdog=
CopyAllData=
AutoOpen=
OpenOptions=
NoMmio=
PromiscuousModeX=
[MadgeISA]
IrqNumber=
IOAddress=
MemBase=
DMAChannel=
The following adapters also have settings in the file NETMADGE.INF:
|Madge Networks Smart 16/4 Ringnode (All ISA Types) |
|Madge Networks Smart 16/4 AT/P Ringnode |
|Madge Networks Smart 16/4 AT Ringnode |
|Madge Networks Smart 16/4 ISA Client Plus Ringnode |
|Madge Networks Smart 16 Ringnode |
Novell
Cardbrand=Novell
INFFile= NETNOVEL.INF
[ne2000]
InterruptNumber=
IOBaseAddress=
Interrupt=
IOBase=
The following adapters also have settings in the file NETNOVELL.INF:
|Artisoft AE-1 |National Semiconductor AT/LANTIC NE1000 Compatible |
|Artisoft AE-2 or AE-3 |Novell Ne2000 Plus |
|Ethernode 16-AT3 |Zenith Data Systems NE2000 Compatible |
|National Semiconductor Ethernode *16AT | |
Proteon
Cardbrand=Proteon
INFFile=NETPROT.INF
;Proteon Token Ring (P1392)
[*pnp81eb]
IntLevel=
IOBase=
DMAChannel=
LinkSpeed=
CardSpeed=
Media=
CableType=
DMAClock=
SAEN=
MaxTransmits=
NetworkAddress=
The following adapters also have settings in the file NETPROT.INF:
|Proteon ISA Token Ring (1340) |Proteon ISA Token Ring (1347) |
|Proteon ISA Token Ring (1342) |Proteon Token Ring (P1392+) |
|Proteon ISA Token Ring (1346) |Proteon Token Ring (P1390) |
Racal
Cardbrand=Racal
INFFile= NETRACAL.INF
; Racal NI6510
[*pnp8113]
IOBase=
MaxReceives=
MaxTransmits=
MaxMulticasts=
The Racal NI5210/8 or NI5210/16 adapter also has settings in the file NETRACAL.INF.
SMC
Cardbrand=SMC
INFFile= NETSMC.INF
;SMC9000
[*Smc9000]
Interrupt=
Port_Num=
Xt_Type=
Micro_Channel=
The following adapters also have settings in the file NETSMC.INF:
|ArcNet Compatible |SMC EtherCard™ adapters |
|Pure Data PDI508+ (ArcNet) |SMC EtherElite adapters |
|Pure Data PDI516+ (ArcNet) |SMC StarCard PLUS adapters |
|SMC® ArcNet adapters |SMC TokenCard Elite |
Thomas-Conrad
Cardbrand=Thomas-Conrad
INFFile= NETTCC
;Thomas-Conrad (All Arcnet Types)
[*pnp8326]
Interrupt=
IOBase=
MemoryBase=
PacketSize=
The following adapters also have settings in the file NETTCC.INF:
|TC6045 |Thomas-Conrad TC6142 |
|TC6145 |Thomas-Conrad TC6242 |
|TC6245 |Thomas-Conrad TC4035 |
|Thomas-Conrad TC6042 |Thomas-Conrad TC4045 |
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.