ENVIRONMENTAL CHEMICAL CORPORATION



[pic]

Federal Supply Schedule

Multiple Award Schedule

Industrial Group: Professional Services

Contract No: GS-10F-0091M

Contract Period: 14 December 2001 through 13 December 2021.

ENVIRONMENTAL CHEMICAL CORPORATION

1240 Bayshore Highway

Burlingame CA 94010

Tel; 650-347-1555 Fax:650-347-5479

Business Size: Small Business

ECC Contacts for Contracting Questions

Christian Canon

Director, Contracts & Procurements

303-298-7607

ccanon@



Price List Current as of Modification # PS-A812 effective PS-0028 effective October 19, 2020

On-line access to contract ordering information, terms and conditions, up to date pricing, and the option to create an electronic delivery order are available through GSA Advantage, a menu-driven database system. The INTERNET address GSA Advantage! is: GSA .

For more information on ordering from Federal Supply Schedules go to the GSA Schedules page at .

Table of Contents

1. Introduction…………………………………………………………………………………3

2. Overview of ECC……………………………………………………………………………4

3. Ordering Instructios / Terms and Conditions……………………………………………..4

4. Customer Information……………………………………………………………………5-6

5. ECC Favorable Labor Rates Under the GSAContract………………………………….7-9

6. The Service Contract Labor Standards Statement……………………………………….9

7. SCA Eligible Contract Labor Category………………………………………………….10

8. Labor Category & Job Description…………………………………………………….11-34

Introduction:

SIN 541620, SIN 562910REM

Contract No: GS-10F-0091M

Contract Period: 14 December 2001 through 13 December 2021.

ECC offers a full-scope of environmental remediation capabilities to our clients. As a recognized leader in the environmental field, ECC develops safe, cost-effective, and creative solutions to today's environmental challenges. These innovative solutions are offered through a broad range of environmental services, including:

o Excavation, removal, manifesting, transportation, storage, treatment, and/or disposal of hazardous waste;

o Preparation, characterization, field investigation, conservation, and closure of sites;

o Containment monitoring and/or reduction of hazardous waste sites.

o Ordnance removal and support; and

o Long term monitoring / long term operation (LTM/LTO).

Federal Agencies benefit from accessing ECC through the GSA Contract in many ways:

o You benefit from an experienced federal contractor who has successfully completed more than $3 Billion in cost reimbursable and firm fixed price remedial actions for the government;

o You can award contracts as Firm Fixed Price or Fixed Unit Rate (Ceiling Price) contracts;

o You can access the contract for work worldwide;

o Your contracting process is fast, simple, and flexible awards are often made within 2 to 3 weeks;

o No formal solicitation or CBD process is required of you;

o Your contract will be in compliance with FAR requirements and contractor qualifications have been verified; and

o As the client you control the selection process and following award the selected contractor works directly with you and invoices go directly to you.

Overview of ECC

Founded in 1985, ECC is a privately held and employee owned business whose central mission is to provide high quality, comprehensive, and competitive environmental remediation, operation and maintenance, and construction services to our clients. Our primary client is the United States Government. ECC's focus is to successfully manage and execute removal/remedial actions, on-site treatment, technology application, and waste management for federal agencies and installations.

ECC graduated from the Small Business Administration 8A program in 1998 and became a Large Business in 2000. Since that time, ECC has since demonstrated the technical and managerial breadth of a large business with the expertise to complete a variety of large-scale, concurrent projects worldwide. We are not limited to any one technology - we use well-established processes, as well as cutting-edge solutions, to serve our clients' needs. Above all, we value human health and safety and our clients' satisfaction due to our excellent performance.

The principal feature of our organizational approach is our streamlined, decentralized management and our empowerment of project teams. ECC's flat management structure facilitates better command, control, communication, and decision-making by allowing program and project managers to be more responsive to situations as they arise.

ECC pools the talents of over 500 professionals located at corporate and project offices worldwide. We have experience working throughout the United States, Europe, Central America, Japan, the Middle East, and the Pacific. Approximately 20 percent of our employees have advanced degrees or technical/professional certifications, and on average employees have 15 years of work experience.

Ordering Instructions / Terms and Conditions

1. Prepare a request for quote that outlines the scope of work, location of work, period of performance, delivery schedule, applicable standards, acceptance criteria, and any other special requirements;

2. Identify if the contract type is firm fixed price or fixed unit rate (ceiling price);

3. Identify requirements related to travel and other direct charges, such as use of the Federal Travel or Joint Travel Regulations;

4. Identify basis for award (cost or “Best Value”) and request information for “Best Value” determination, such as corporate experience and past performance information, if award is to be made based upon on best value;

5. Transmit the request to contractor; and

6. Evaluate responses sand select contractor to receive the award.

CUSTOMER INFORMATION:

1a. Table of Awarded Special Item Number(s) with appropriate cross reference to page numbers:

SIN OLM: SIN 541620 “Environmental Consulting Services” and SIN 562910REM “ Environmental Remediation Services”

1b. Identification of the lowest priced model number and lowest unit price for that model for each special item number awarded in the contract.  This price is the Government price based on a unit of one, exclusive of any quantity/dollar volume, prompt payment, or any other concession affecting price.  Those contracts that have unit prices based on the geographic location of the customer, should show the range of the lowest price, and cite the areas to which the prices apply. Not applicable

1c. If the Contractor is proposing hourly rates a description of all corresponding commercial job titles, experience, functional responsibility and education for those types of employees or subcontractors who will perform services shall be provided.  If hourly rates are not applicable, indicate "Not applicable" for this item. See pages (7-9) for Unit Rates & Titles. See Labor Category and Job Description on Pages 11-34

2. Maximum Order: $1,000,000.00

3. Minimum Order: $100

4. Geographic Coverage (delivery Area): Domestic and Overseas

5. Point(s) of production (city, county, and state or foreign country): Same as Contractor

6. Discount from list prices or statement of net price: Government Net Prices (discounts already deducted).

7. Quantity discounts: Not applicable

8. Prompt payment terms: Net 30 days. Information for Ordering Offices: Prompt Payment Terms cannot be negotiated out of the contractual agreement in exchange for other consessions.

9. Foreign items (list items by country of origin): None

10a. Time of delivery. (Contractor insert number of days.) To Be Determined at the Task Order level

10b. Expedited Delivery. Items available for expedited delivery are noted in this price list. To Be Determined at the Task Order level

10c. Overnight and 2-day delivery. To Be Determined at the Task Order level

10d. Urgent Requirements. To Be Determined at the Task Order level

11. F.O.B Points(s): Destination

12a. Ordering Address(es): Same as Contractor

12b. Ordering procedures:  For supplies and services, the ordering procedures, information on Blanket Purchase Agreements (BPA's), and a sample BPA can be found in the Federal Acqusitions Regulation (FAR) 8.405-3.

13. Payment address(es): Same as Contractor

14. Warranty provision.: Contractor’s standard commercial warranty.

15. Export Packing Charges (if applicable): Not applicable

16. Terms and conditions of rental, maintenance, and repair (if applicable): Not applicable

17. Terms and conditions of installation (if applicable): Contact Contractor

18a. Terms and conditions of repair parts indicating date of parts price lists and any discounts from list prices (if applicable): Not applicable

18b. Terms and conditions for any other services (if applicable): Contact Contractor

19. List of service and distribution points (if applicable): Contact Contractor

20. List of participating dealers (if applicable): Not applicable

21. Preventive maintenance (if applicable): Not applicable

22a. Environmental attributes, e.g., recycled content, energy efficiency, and/or reduced pollutants: Not applicable

22b. If applicable, indicate that Section 508 compliance information is available on Electronic and Information Technology (EIT) supplies and services and show where full details can be found (e.g. contactor's website or other location.) The EIT standards can be found at: .

Not applicable.

23. Data Universal Numbering System (DUNS) number: 601293962

24. Notification regarding registration in System for Award Management (SAM): Environmental Chemical Corporation’s registration is current and valid.

ECC Offers Favorable Labor Rates Under the GSA Contract

12/14/2019 – 12/13/2021

|Labor Category (e.g. Job Title/Task) |YEAR 19 |YEAR 20 |

| |12/14/2019 |12/14/2020 |

| |12/13/2020 |12/13/2021 |

|Program Manager |$170.91 |$173.98 |

|Project Manager |$127.11 |$129.40 |

|Sr. Project Manager |$150.25 |$152.95 |

|Certified Industrial Hygienist |$119.79 |$121.95 |

|Health & Safety Officer |$92.80 |$94.47 |

|Quality Control Manager |$125.00 |$127.25 |

|Field Chemist |$86.38 |$87.94 |

|Geologist/Hydrogeologist |$100.69 |$102.50 |

|Civil Engineer |$129.95 |$132.29 |

|Cost/Schedule Engineer |$74.31 |$75.65 |

|Administrative Assistant |$49.13 |$50.01 |

|Health Physicist Technician |$84.03 |$85.54 |

|Certified Health Physicist |$100.22 |$102.03 |

|Chief Engineer |$137.15 |$139.62 |

|Contracts Administrator |$126.33 |$128.61 |

|Cost Estimator |$123.55 |$125.77 |

|Superintendent |$106.70 |$108.62 |

|Project Engineer |$115.10 |$117.17 |

|Supervisor - Field |$97.07 |$98.82 |

|Regulatory Specialist |$128.71 |$131.02 |

|Safety and Health Manager |$126.04 |$128.31 |

|** Secretary I |$49.26 |$50.14 |

|** Secretaty III |$65.35 |$66.52 |

|** Word Processor I |$46.10 |$46.93 |

|** Word Processor II |$57.90 |$58.94 |

|** Forklift Operator |$45.36 |$46.18 |

|Drag |$60.44 |$61.53 |

|** Heavy Equipment Operator |$73.11 |$74.43 |

|** Laborer |$40.82 |$41.55 |

|** Carpenter |$65.28 |$66.46 |

|** Electrician |$86.32 |$87.87 |

|** Welder |$58.68 |$59.73 |

|** Well Driller |$61.44 |$62.55 |

|** Pipefitter |$78.87 |$80.29 |

|** Plumber |$78.02 |$79.42 |

|** Rigger |$58.68 |$59.73 |

|** Water Treatment Plant Operator |$71.19 |$72.47 |

|Civil Engineering Technician |$67.04 |$68.25 |

|** Drafter II |$65.35 |$66.52 |

|** Drafter IV |$83.71 |$85.22 |

|Engineering Technician II |$48.41 |$49.28 |

|Engineering Technician VI |$96.89 |$98.63 |

|** Environmental Technician |$65.46 |$66.64 |

|** Laboratory Technician |$59.35 |$60.42 |

|** Technical Writer |$92.35 |$94.02 |

|** Truck Driver |$57.11 |$58.13 |

|Sample Location Technician |$73.18 |$74.50 |

|UXO Tech I (Regular Time) |$64.98 |$66.15 |

|** UXO Tech I (Regular Time Avoidance) |$76.21 |$77.58 |

|** UXO Tech I (Regular Time Hazardous) |$79.15 |$80.58 |

|** UXO Tech II (Regular Time) |$78.60 |$80.01 |

|** UXO Tech II (Regular Time Avoidance) |$90.40 |$92.03 |

|** UXO Tech II (Regular Time Hazardous) |$93.87 |$95.56 |

|** UXO Tech III (Regular Time) |$94.20 |$95.89 |

|** UXO Tech III (Regular Time Avoidance) |$106.62 |$108.54 |

|** UXO Tech III (Regular Time Hazardous) |$110.71 |$112.70 |

|UXO SO/QC (Regular Time) |$128.12 |$130.42 |

|UXO SO/QC (Regular Time Avoidance) |$133.22 |$135.62 |

|UXO SO/QC (Regular Time Hazardous) |$138.35 |$140.84 |

|SUXOS (Regular Time) |$136.10 |$138.55 |

|SUXOS (Regular Time Avoidance) |$141.55 |$144.09 |

|SUXOS (Regular Time Hazardous) |$146.99 |$149.64 |

|UXO Program HSM (Regular Time) |$128.12 |$130.42 |

|UXO Program HSM (Regular Time Avoidance) |$133.22 |$135.62 |

|UXO Program HSM (Regular Time Hazardous) |$138.35 |$140.84 |

|Senior Geophysicist |$131.13 |$133.49 |

|UXO Project Superintendent |$147.12 |$149.76 |

|UXO Project Manager |$151.53 |$154.25 |

|UXO Program Manager |$206.56 |$210.28 |

|UXO Program QC Manager |$142.09 |$144.65 |

*Rates shown above are fully burdened.

SCLS STATEMENT

The Service Contract Labor Standards, formerly the Service Contract Act (SCA) apply to this contract and it includes SCLS applicable labor categories. Labor Categories and fixed price services marked with a (**) in this pricelist are based on the US Department of Labor Wage Determination Number(s) identified in the SCLS/SCA Matrix. The prices awarded are in line with the geographic scope of the contract (i.e., nationwide).

.

| |Service Contract Labor Standards |

| |SCLS MATRIX |

|SCLS Eligible Contract Labor | | |WD Number |

|Category |SCLS |SCLS Equivalent Code Title | |

| |Code | | |

|Secretary 1 |01311 |Secretary 1 |15-5637 |

|Secretary III |01313 |Secretary III |15-5637 |

|Word Processor I |01611 |Word Processor I |15-5637 |

|Word Processor II |01612 |Word Processor II |15-5637 |

|Forklift Operator |21020 |Forklift Operator |15-5637 |

|Heavy Equipment Mechanic |23430 |Heavy Equipment Mechanic |15-5637 |

|Heavy Equipment Operator |23440 |Heavy Equipment Operator |15-5637 |

|Laborer |11210 |Laborer, Grounds Maintenance |15-5637 |

|Carpenter |23130 |Carpenter, Maintenance |15-5637 |

|Electrician |23160 |Electrician, Maintenance |15-5637 |

|Welder |23960 |Welder, Combination, Maintenance |15-5637 |

|Well Driller |23965 |Well Driller |15-5637 |

|Pipefitter |23790 |Pipefitter, Maintenance |15-5637 |

|Plumber |23810 |Plumber, Maintenance |15-5637 |

|Rigger |23850 |Rigger |15-5637 |

|Water Treatment Plant Operator |25210 |Water Treatment Plant Operator |15-5637 |

|Civil Engineering Technician |30040 |Civil Engineering Technician |15-5637 |

|Drafter II |30062 |Drafter/CAD Operator II |15-5637 |

|Drafter IV |30064 |Drafter/CAD Operator IV |15-5637 |

|Engineering Technician II |30082 |Engineering Technician II |15-5637 |

|Engineering Technician VI |30086 |Engineering Technician VI |15-5637 |

|Environmental Technician |30090 |Environmental Technician |15-5637 |

|Laboratory Technician |30210 |Laboratory Technician |15-5637 |

|Technical Writer |30463 |Technical Writer III |15-5637 |

|Truck Driver |31362 |Truck driver, Medium |15-5637 |

|Sample Location Technician |30090 |Environmental Technician |15-5637 |

|UXO Tech I (Regular Time) |30491 |Unexploded Ordnance (UXO) Technician I |15-5637 |

|UXO Tech I (Regular Time Avoidance) |30491 |Unexploded Ordnance (UXO) Technician I |15-5637 |

|UXO Tech I (Regular Time Hazardous) |30491 |Unexploded Ordnance (UXO) Technician I |15-5637 |

|UXO Tech II (Regular Time) |30492 |Unexploded Ordnance (UXO) Technician II |15-5637 |

|UXO Tech II (Regular Time Avoidance) |30492 |Unexploded Ordnance (UXO) Technician II |15-5637 |

|UXO Tech II (Regular Time Hazardous) |30492 |Unexploded Ordnance (UXO) Technician II |15-5637 |

|UXO Tech III (Regular Time) |30493 |Unexploded Ordnance (UXO) Technician III |15-5637 |

|UXO Tech III (Regular Time Avoidance)|30493 |Unexploded Ordnance (UXO) Technician III |15-5637 |

|UXO Tech III (Regular Time Hazardous)|30493 |Unexploded Ordnance (UXO) Technician III |15-5637 |

Labor Category and Job Description:

|SIN(s) Proposed |Labor Category |Minimum Education |Minimum Years of |Functional Responsibilities |

| |Proposed | |Experience | |

|541620 |Program Manager |BS |11 |Manages the activities of a designated program to ensure that ECC goals |

|562910REM | | | |and program and project objectives are achieved within prescribed |

| | | | |timeframe and funding parameters. Manages forecasting, planning, and |

| | | | |performance execution to foster client trust and alignment resulting in |

| | | | |satisfaction with work product. Interacts with client on programmatic |

| | | | |matters and ensures liaison between projects and programs, overseeing |

| | | | |corporate level matters. |

|541620 |Sr. Project Manager|BS |5 |Manages the activities of a designated program to ensure that ECC goals |

|562910REM | | | |and program and project objectives are achieved within prescribed |

| | | | |timeframe and funding parameters. Manages forecasting, planning, and |

| | | | |performance execution to foster client trust. Assists the Program Manager|

| | | | |as needed in performance of those duties. Assists with resourcing as |

| | | | |necessary for simultaneous or multiple project performance. |

|541620 |Project Manager |BS |2 |Manages the activities of designated projects to ensure that goals or |

|562910REM | | | |objectives of project are accomplished within prescribed time frame and |

| | | | |funding parameters. Provides reporting as necessary to Program Management|

| | | | |to ensure smooth lines of communication are maintained between project |

| | | | |and program. Performs as designated point of contact for project, with |

| | | | |all levels in day to day activities and long range activities. |

|541620 |Certified |BS |5 |Investigate, develop remediation plans, and report findings and results |

|562910REM |Industrial | | |in accordance with regulations and applicable industry standards. Perform|

| |Hygienist | | |air, surface, and water sampling according to EPA, OSHA, NIOSH, and |

| | | | |industry analytical methods. Evaluate and provide MSDS; Perform paint, |

| | | | |asbestos, surveys and monitoring. Perform exposure monitoring for health |

| | | | |risks. |

|541620 |Health & Safety |BS |8 |Ensures compliance with health and safety requirements on construction |

|562910REM |Officer | | |and environmental projects as defined by Company standards, governmental |

| | | | |regulations, and contractual obligations. This position may oversee loss |

| | | | |prevention in concurrent multiple or large projects encompassing a number|

| | | | |of subcontractors. |

|541620 |Quality Control |BS |8 |Responsible for verifying compliance with quality requirements on |

|562910REM |Manager | | |construction and environmental projects as defined by Company standards |

| | | | |and contractual obligations. |

|541620 |Field Chemist |BS or Equiv |4 |Plans, coordinates, and implements chemical and analytical services to |

|562910REM | | | |fully address the scope of work on environmental remediation and |

| | | | |hazardous waste management projects in accordance with Company standards,|

| | | | |regulatory criteria, and contractual obligations. |

|541620 |Geologist/ |BS |6 |Coordinates and implements scientific and environmental services to fully|

|562910REM |Hydrogeologist | | |address the scope of work on environmental remediation and hazardous |

| | | | |waste management projects in accordance with Company standards, |

| | | | |regulatory criteria, and contractual obligations. |

|541620 |Civil Engineer |BS |7 |Plans, selects, coordinates, and implements scientific and engineering |

|562910REM | | | |services to fully address the scope of work on environmental remediation,|

| | | | |hazardous waste management, and/or construction projects in accordance |

| | | | |with Company standards, regulatory criteria, and contractual obligations.|

|541620 |Cost/Schedule |HSD |5 |Manages and tracks the project cost and timetable, utilizing applicable |

|562910REM |Engineer | | |project controls software and techniques. |

|541620 |Administrative |HSD |1 |Provides support and coordination for staff and management in carrying |

|562910REM |Assistant | | |out administrative duties and special assignments. |

|541620 |Health Physicist |BS |4 |Responsible for performing varied health functions related to the |

|562910REM |Technician | | |remediation of environmental sites contaminated with low-level |

| | | | |radioactive materials. |

|541620 |Certified Health |BS |5 |Responsible for performing varied technical and engineering functions |

|562910REM |Physicist | | |related to the remediation of environmental sites contaminated with |

| | | | |low-level radioactive materials. This position requires active |

| | | | |certification by the American Board of Health Physics. |

|541620 |Chief Engineer |BS |10 |Ensures project engineers comply with corporate policies, programs, and |

|562910REM | | | |practices. Actively assumes responsibility to facilitate effective |

| | | | |communication and engineering practices in compliance with respective |

| | | | |codes and regulations. |

|541620 |Contracts |BA or Equiv |10 |Responsible for contract and subcontract administration duties. Direct |

|562910REM |Administrator | | |interaction with government contracting officer and his/her staff |

| | | | |relative to all contract administration issues. Support and guidance to |

| | | | |project team members with respect to change notice submission and |

| | | | |administration. Supports request for equitable adjustment. |

|541620 |Cost Estimator |BA or Equiv |7 |Assists in the timely development of accurate project cost estimates. |

|562910REM | | | |killed in managing large volumes of detailed information accurately. |

| | | | |Responds to critical requests and demanding deadlines. Reads and |

| | | | |interprets blueprints, sketches, specifications, and manufacturers’ |

| | | | |installation & operation manuals. Performs basic takeoffs. |

|541620 |Superintendent |BS or Equiv |5 |Implements field-related policies, programs, and practices. Coordinates |

|562910REM | | | |with project staff (PM, H&S, QC, engineers) to prioritize field |

| | | | |activities. |

|541620 |Project Engineer |BS |1 |Plans, selects, coordinates, and implements engineering and construction |

|562910REM | | | |services in accordance with copany standards, regulatory criteria, and |

| | | | |contractual obligations. Executes and mnages field engineering |

| | | | |activities, coordinates design documents and field submittals, and |

| | | | |supports construction schedules. Observes field work and ensures |

| | | | |compliance with approved plans and acceptable tolerances. |

|541620 |Supervisor - Field |BS or Equiv |5 |Organize and supervise the day-to-day operations of the field personnel, |

|562910REM | | | |including the equipment operators and environmental technicians; and |

| | | | |assign necessary personnel, equipment, and materials for scheduled tasks.|

| | | | |Monitor personnel to ensure tasks are accomplished as scheduled. |

|541620 |Regulatory |BS |10 |Coordinate and document internal regulatory processes, such as internal |

|562910REM |Specialist | | |audits, inspections, license renewals, or registrations. May compile and |

| | | | |prepare materials for submission to regulatory agencies. |

|541620 |Safety and Health |BS or Equiv |8 |safety requirements on construction and environmental projects. Oversees |

|562910REM |Manager | | |loss prevention in concurrent multiple or large projects encompassing a |

| | | | |number of subcontractors. Implements APPs and AHAs, promotes and oversees|

| | | | |S&H programs, facilitates training, ensures S&H deficiencies are |

| | | | |corrected in a timely manner; reports incidents, as needed. |

|541620 |Secretary I |HSD |2 |Provides principal secretarial support in an office, usually to one |

|562910REM | | | |individual, and, in some cases, also to the subordinate staff of that |

| | | | |individual. Maintains a close and highly responsive relationship to the |

| | | | |day-to-day activities of the supervisor and staff. Works fairly |

| | | | |independently, receiving a minimum of detailed supervision and guidance. |

| | | | |Performs varied clerical and secretarial duties requiring a knowledge of |

| | | | |office routine and an understanding of the organization, programs, and |

| | | | |procedures related to the work of the office. |

|541620 |Secretary III |HSD |6 |Provides principal secretarial support in an office, usually to one |

|562910REM | | | |individual, and, in some cases, also to the subordinate staff of that |

| | | | |individual. Maintains a close and highly responsive relationship to the |

| | | | |day-to-day activities of the supervisor and staff. Works fairly |

| | | | |independently, receiving a minimum of detailed supervision and guidance. |

| | | | |Performs varied clerical and secretarial duties requiring a knowledge of |

| | | | |office routine and an understanding of the organization, programs, and |

| | | | |procedures related to the work of the office. |

|541620 |Word Processor I |HSD |2 |Produces a variety of standard documents, such as correspondence, form |

|562910REM | | | |letters, reports, tables and other printed materials. Work requires skill|

| | | | |in typing; a knowledge of grammar, punctuation and spelling; and ability |

| | | | |to use reference guides and equipment manuals. Performs familiar, routine|

| | | | |assignments following standard procedures. Seeks further instructions for|

| | | | |assignments requiring deviations from established procedures. |

|541620 |Word Processor II |HSD |6 |Requires both a comprehensive knowledge of word processing software |

|562910REM | | | |applications and office practices and a high degree of skill in applying |

| | | | |software functions to prepare complex and detailed documents. For |

| | | | |example, processes complex and lengthy technical reports which include |

| | | | |tables, graphs, charts, or multiple columns. Uses either different word |

| | | | |processing packages or many different style macros or special command |

| | | | |functions. Independently completes assignments and resolves problems. |

|541620 |Forklift Operator |None |1 |Operates a manually controlled gasoline, electric or liquid propane gas |

|562910REM | | | |powered forklift to transport goods and materials of all kinds about a |

| | | | |warehouse, manufacturing plant, or other establishment. |

|541620 |Heavy Equipment |None |2 |Analyzes malfunctions and repairs, rebuilds and maintains power |

|562910REM |Mechanic | | |equipment, such as cranes, power shovels, scrapers, paving machines, |

| | | | |motor graders, trench-digging machines, conveyors, bulldozers, dredges, |

| | | | |pumps, compressors and pneumatic tools. Operates and inspects machines or|

| | | | |equipment to diagnose defects. Dismantles and reassembles equipment, |

| | | | |using hoists and hand tools. Examines parts for damage or excessive wear,|

| | | | |using micrometers and gauges. Replaces defective engines and |

| | | | |subassemblies, such as transmissions. Tests overhauled equipment to |

| | | | |insure operating efficiency. Welds broken parts and structural members. |

| | | | |May direct workers engaged in cleaning parts and assisting with assembly |

| | | | |and disassembly of equipment. May repair, adjust and maintain mining |

| | | | |machinery, such as stripping and loading shovels, drilling and cutting |

| | | | |machines, and continuous mining machines. |

|541620 |Heavy Equipment |None |2 |Operates heavy equipment such as cranes, clamshells, power shovels, motor|

|562910REM |Operator | | |graders, heavy loaders, carryalls, bulldozers, rollers, scrapers, and |

| | | | |large industrial tractors with pan or scrapper attachments. Equipment is |

| | | | |used to excavate, load or move dirt, gravel or other materials. Operator |

| | | | |may read and interpret grade and slope stakes and simple plans. May |

| | | | |grease, adjust and make emergency repairs to equipment. |

|541620 |Laborer |None |1 |Performs tasks which require mainly physical abilities and effort |

|562910REM | | | |involving little or no specialized skill or prior work experience. The |

| | | | |following tasks are typical of this occupation: Loads and unloads trucks,|

| | | | |and other conveyances; moves supplies and materials to proper location by|

| | | | |wheelbarrows or handtrucks; stacks materials for storage or binning; |

| | | | |collects refuse and salvageable materials. Digs, fills, and tamps earth |

| | | | |excavations; levels ground using pick, shovel, tamper and rake; shovels |

| | | | |concrete and snow; cleans culverts and ditches; cuts tree and brush; |

| | | | |operates power lawnmowers. Moves and arranges heavy pieces of office and |

| | | | |household furniture, equipment, and appliances; moves heavy pieces of |

| | | | |automotive, medical engineering, and other types of machinery and |

| | | | |equipment. Spreads sand and salt on icy roads and walk-ways; picks up |

| | | | |leaves and trash. |

|541620 |Carpenter |None |2 |Performs the carpentry duties necessary to maintain in good repair |

|562910REM | | | |building woodwork and equipment such as bins, cribs, counters, benches, |

| | | | |partitions, doors, floors, stairs, casings, and trim made of wood. Work |

| | | | |involves most of the following: Planning and laying out of work from |

| | | | |blueprints, drawings, models, or verbal instructions, using a variety of |

| | | | |carpenter's hand tools, portable power tools and standard measuring |

| | | | |instruments; making standard shop computations relating to dimensions of |

| | | | |work; and selecting materials necessary for the work. In general, the |

| | | | |work of the maintenance carpenter requires rounded training and |

| | | | |experience usually acquired through a formal apprenticeship or equivalent|

| | | | |training and experience. |

|541620 |Electrician |None |2 |Performs a variety of electrical trade functions such as the |

|562910REM | | | |installation, maintenance, or repair of equipment for the generation, |

| | | | |distribution, or utilization of electric energy. Work involves most of |

| | | | |the following: Installing or repairing any of a variety of electrical |

| | | | |equipment such as generators, transformers, switchboards, controllers, |

| | | | |circuit breakers, motors, heating units, conduit systems, or other |

| | | | |transmission equipment; working from blueprints, drawings, layouts, or |

| | | | |other specifications; locating and diagnosing trouble in the electrical |

| | | | |system or equipment; working standard computations relating to load |

| | | | |requirements of wiring or electrical equipment; and using a variety of |

| | | | |electrician's hand tools and measuring and testing instruments. In |

| | | | |general, the work of the maintenance electrician requires rounded |

| | | | |training and experience usually acquired through a formal apprenticeship |

| | | | |or equivalent training and experience. |

|541620 |Welder |None |2 |Welds metal components together to fabricate or repair products, such as |

|562910REM | | | |machine parts, plant equipment, mobile homes, motors and generators, |

| | | | |according to layouts, blueprints or work orders, using brazing and a |

| | | | |variety of arc and gas welding equipment. Welds metal parts together, |

| | | | |using both gas welding or brazing and any combination of arc welding |

| | | | |processes. Performs related tasks such as thermal cutting and grinding. |

| | | | |Repairs broken or cracked parts, fills holes and increases size of metal |

| | | | |parts. Positions and clamps together components of fabricated metal |

| | | | |products preparatory to welding. May locate and repair cracks in |

| | | | |industrial engine cylinder heads, using inspection equipment and gas |

| | | | |torch. May perform repairs only. May be required to pass employer |

| | | | |performance tests or standard tests to meet certification standards of |

| | | | |governmental agencies or professional and technical associations. |

|541620 |Well Driller |None |2 |Sets up and operates portable drilling rig (machine and related |

|562910REM | | | |equipment) to drill wells. Extends stabilizing jackscrews to support and |

| | | | |level drilling rig. Moves levers to control power-driven winch that |

| | | | |raises and extends telescoping mast. Bolts trusses and guy wires to |

| | | | |raised mast and anchors them to machine frame and stakes. Assembles |

| | | | |drilling tools, using hand tools or power tools. Moves levers and pedals |

| | | | |to raise tools into vertical drilling position and lowers well casing |

| | | | |(pipe that shores up walls of well) into well bore, using winch. Moves |

| | | | |levers and pedals and turns handwells to control reciprocating action of |

| | | | |machine and to drive or extract well casing. Pumps water into well to |

| | | | |facilitate drilling by cooling drill bit and removing drillings. Listens |

| | | | |to sounds of drilling machine and feels cable or brake to determine |

| | | | |drilling conditions and to identify variations such as entering new |

| | | | |strata or striking rock. Moves levers to adjust stroke and impact of |

| | | | |cable tool drilling machine or changes drill bits of rotary drilling |

| | | | |machine to fit changing conditions. Replaces drill bit with tool to |

| | | | |collect samples of earth or rock being penetrated. Examines samples to |

| | | | |determine nature of strata encountered or submits samples to laboratory |

| | | | |for analysis. Records drilling progress and geological data. Splices worn|

| | | | |or broken cable. May sharpen bits by heating them in forging furnace and |

| | | | |hammering edges on anvil. May build up worn drill bits by arc welding, |

| | | | |tempering bits in furnace, and by quenching them in water. May retrieve |

| | | | |lost equipment from bore holes, using specialized retrieval tools and |

| | | | |equipment. May fabricate well casings. May restore wells to active |

| | | | |production. |

|541620 |Pipefitter |None |2 |Installs or repairs water, steam, gas or other types of pipe and |

|562910REM | | | |pipefittings. Work involves most of the following: Laying out work and |

| | | | |measuring to locate position of pipe from drawings or other written |

| | | | |specifications; cutting various sizes of pipe to correct lengths with |

| | | | |chisel and hammer, oxyacetylene torch or pipe-cutting machines; threading|

| | | | |pipe with stocks and dies, bending pipe by hand-driven or power-driven |

| | | | |machines; assembling pipe with couplings and fastening pipe to hangers; |

| | | | |making standard shop computations relating to pressures, flow and size of|

| | | | |pipe required; and making standard tests to determine whether finished |

| | | | |pipes meet specifications. In general, the work of the maintenance |

| | | | |pipefitter requires rounded training and experience usually acquired |

| | | | |through a formal apprenticeship or equivalent training and experience. |

|541620 |Plumber |None |2 |Assembles, installs and repairs pipes, fittings and fixtures of heating, |

|562910REM | | | |water, and drainage systems, according to specifications and plumbing |

| | | | |codes. Studies building plans and working drawings to determine work aids|

| | | | |required and sequence of installations. Inspects structure to ascertain |

| | | | |obstructions to be avoided to prevent weakening of structure resulting |

| | | | |from installation of pipe. Locates and marks position of pipe and pipe |

| | | | |connections and passage holes for pipes in walls and floors, using ruler,|

| | | | |spirit level and plumb bob. Cuts openings in walls and floors to |

| | | | |accommodate pipe and pipe fittings, using hand tools and power tools. |

| | | | |Cuts and threads pipe, using pipe cutters, cutting torch, and |

| | | | |pipe-threading machine. Bends pipe to required angle by use of |

| | | | |pipe-bending machine or by placing pipe over block and bending it by |

| | | | |hand. Assembles and installs valves, pipe fittings, and pipes composed of|

| | | | |metals, such as iron, steel, brass and lead, and nonmetals, such as |

| | | | |glass, vitrified clay, and plastic, using hand tools and power tools. |

| | | | |Joins pipe by use of screws, bolts, fittings, solder, plastic solvent, |

| | | | |and calks joints. Fills pipe system with water or air and reads pressure |

| | | | |gauges to determine whether system is leaking. Installs and repairs |

| | | | |plumbing fixtures, such as sinks, commodes, bathtubs, water heaters, hot |

| | | | |water tanks, garbage disposal units, dishwashers, and water softeners. |

| | | | |Repairs and maintains plumbing by replacing washers in leaky faucets, |

| | | | |mending burst pipes, and opening clogged drains. May weld holding |

| | | | |fixtures to steel structural members. |

|541620 |Rigger |None |2 |Assembles rigging to lift and move equipment or material in manufacturing|

|562910REM | | | |plant or shipyard. Selects cables, ropes, pulleys, winches, blocks, and |

| | | | |sheaves, according to weight and size of load to be moved. Attaches |

| | | | |pulley and blocks to fixed overhead structures, such as beams, ceilings, |

| | | | |and gin pole booms, with bolts and clamps. Attaches load with grappling |

| | | | |devices, such as loops, wires, ropes and chains, to crane hook. Gives |

| | | | |directions to Bridge-or-Gantry-Crane Operator or Hoisting Engineer |

| | | | |engaged in hoisting and moving loads to insure safety of workers and |

| | | | |material handled, using hand signals, loudspeaker, or telephone. Sets up,|

| | | | |braces, and rigs hoisting equipment, using hand tools and power wrenches.|

| | | | |Splices rope and wire cables to make or repair slings and tackle. May |

| | | | |direct workers engaged in hoisting machinery and equipment into ships. |

|541620 |Water Treatment |None |2 |Controls treatment plant machines and equipment to purify and clarify |

|562910REM |Plant Operator | | |water for human consumption and for industrial use. Operates and controls|

| | | | |electric motors, pumps, and valves to regulate flow of raw water into |

| | | | |treating plant. Dumps specified amounts of chemicals, such as chlorine, |

| | | | |ammonia, and lime into water or adjusts automatic devices that admit |

| | | | |specified amounts of chemicals into tanks to disinfect, deodorize, and |

| | | | |clarify water. Starts agitators to mix chemicals and allows impurities to|

| | | | |settle to bottom of tank. Turns valves to regulate water through filter |

| | | | |beds to remove impurities. Pumps purified water into water mains. |

| | | | |Monitors panelboard and adjusts controls to regulator flow rates, loss of|

| | | | |head pressure and water elevation and distribution of water. Cleans tanks|

| | | | |and filter beds, using backwashing (reverse flow of water). Repairs and |

| | | | |lubricates machines and equipment, using hand- and power tools. Tests |

| | | | |water samples to determine acidity, color, and impurities, using |

| | | | |colorimeter, turbidimeter, and conductivity meter. Dumps chemicals such |

| | | | |as alum into tanks to coagulate impurities and reduce acidity. Records |

| | | | |data, such as residual content of chemicals, water turbidity, and water |

| | | | |pressure. May operate portable water-purification plant to supply |

| | | | |drinking water. May purify waste water from plant preparatory to pumping |

| | | | |water into rivers and steams or city mains. |

|541620 |Civil Engineering |BS |2 |Assists Civil Engineer in application of principles, methods, and |

|562910REM |Technician | | |techniques of civil engineering technology. Reviews project |

| | | | |specifications and confers with Civil Engineer concerning assistance |

| | | | |required, such as plan preparation, acceptance testing, evaluation of |

| | | | |field conditions, design changes, and reports. Conducts materials testing|

| | | | |and analysis, using tools and equipment and applying engineering |

| | | | |knowledge necessary to conduct tests. Prepares reports detailing tests |

| | | | |conducted and their results. Surveys project sites to obtain and analyze |

| | | | |topographical details of sites, using maps and surveying equipment. |

| | | | |Drafts detailed dimensional drawings such as those needed for highway |

| | | | |plans, structural steel fabrication, and water control projects, |

| | | | |performing duties as described under Drafter. Calculates dimensions, |

| | | | |profile specifications, and quantities of materials such as steel, |

| | | | |concrete, and asphalt, using calculator |

|541620 |Drafter II |BS |2 |Prepares various drawings of such units as construction projects or parts|

|562910REM | | | |and assemblies, including various views, sectional profiles, irregular or|

| | | | |reverse curves, hidden lines, and small or intricate details. Work |

| | | | |requires use of most of the conventional drafting techniques and a |

| | | | |working knowledge of the terms and procedures of the occupation. Makes |

| | | | |arithmetic computations using standard formulas. Familiar or recurring |

| | | | |work is assigned in general terms. Unfamiliar assignments include |

| | | | |information on methods, procedures, sources of information, and |

| | | | |precedents to follow. Simple revisions to existing drawings may be |

| | | | |assigned with a verbal explanation of the desired results. More complex |

| | | | |revisions are produced from sketches or specifications which clearly |

| | | | |depict the desired product. |

|541620 |Drafter IV |BS |6 |Works closely with design originators, preparing drawings of unusual, |

|562910REM | | | |complex, or original designs which require a high degree of precision. |

| | | | |Performs unusually difficult assignments requiring considerable |

| | | | |initiative, resourcefulness, and drafting expertise. Assures that |

| | | | |anticipated problems in manufacture, assembly, installation, and |

| | | | |operation are resolved by the drawing produced. Exercises independent |

| | | | |judgment in selecting and interpreting data based on a knowledge of the |

| | | | |design intent. Although working primarily as a drafter, may occasionally |

| | | | |interpret general designs prepared by others to complete minor details. |

| | | | |May provide advice and guidance to lower level drafters or serve as |

| | | | |coordinator and planner for large and complex drafting projects. |

|541620 |Engineering |BS |2 |Performs standardized or prescribed assignments involving a sequence of |

|562910REM |Technician II | | |related operations. Follows standard work methods on recurring |

| | | | |assignments but receives explicit instructions on unfamiliar assignments;|

| | | | |technical adequacy of routine work is reviewed on completion; nonroutine |

| | | | |work may also be reviewed in progress. Performs at this level one or a |

| | | | |combination of such typical duties as: Following specific instructions, |

| | | | |assembles or constructs simple or standard equipment or parts; may |

| | | | |service or repair simple instruments or equipment. Conducts a variety of|

| | | | |tests using established methods. Prepares test specimens, adjusts and |

| | | | |operates equipment, and records test data, pointing out deviations |

| | | | |resulting from equipment malfunction or observational errors. Extracts |

| | | | |engineering data from various prescribed but nonstandardized sources; |

| | | | |processes the data following well-defined methods including elementary |

| | | | |algebra and geometry; presents the data in prescribed form. |

|541620 |Engineering |BS |6 |Independently plans and accomplishes complete projects or studies of |

|562910REM |Technician VI | | |broad scope and complexity. Or serves as an expert in a narrow aspect of |

| | | | |a particular field of engineering, e.g., environmental factors affecting |

| | | | |electronic engineering. Complexity of assignments typically requires |

| | | | |considerable creativity and judgment to devise approaches to accomplish |

| | | | |work, resolve design and operational problems, and make decisions in |

| | | | |situations where standard engineering methods, procedures, and techniques|

| | | | |may not be applicable. Supervisor or professional engineer provides |

| | | | |advice on unusual or controversial problems or policy matters; completed |

| | | | |work is reviewed for compliance with overall project objectives. May |

| | | | |supervise or train and be assisted by lower level technicians. |

|541620 |Environmental |None |2 |Conducts tests and field investigations to obtain data for use by |

|562910REM |Technician | | |environmental, engineering and scientific personnel in determining |

| | | | |sources and methods of controlling pollutants in air, water, and soil, |

| | | | |utilizing knowledge of agriculture, chemistry, meteorology, and |

| | | | |engineering principles and applied technologies. Conducts chemical and |

| | | | |physical laboratory and field tests according to prescribed standards to |

| | | | |determine characteristics or composition of solid, liquid, or gaseous |

| | | | |materials and substances, using pH meter, chemicals, autoclaves, |

| | | | |centrifuge spectrophotometer, microscope, analytical instrumentation, and|

| | | | |chemical laboratory equipment. Collects samples of gases from |

| | | | |smokestacks, and collects other air samples and meteorological data to |

| | | | |assist in evaluation of atmospheric pollutants. Collects water samples |

| | | | |from streams and lakes, or raw, semiprocessed or processed water, |

| | | | |industrial waste water, or water from other sources to assess pollution |

| | | | |problem. Collects soil, silt, or mud to determine chemical composition |

| | | | |and nature of pollutants. Prepares sample for testing, records data, and |

| | | | |prepares summaries and charts for review. Sets monitoring equipment to |

| | | | |provide flow of information. Installs, operates, and performs routine |

| | | | |maintenance on gas and fluid flow systems, chemical reaction systems, |

| | | | |mechanical equipment, and other test instrumentation. May operate fixed |

| | | | |or mobile monitoring or data collection station. May conduct |

| | | | |bacteriological or other tests related to research in environmental or |

| | | | |pollution control activity. May collect and analyze engine exhaust |

| | | | |emissions to determine type and amount of pollutants. May specialize in |

| | | | |one phase or type of environmental pollution or protection and be |

| | | | |identified according to specialty. |

|541620 |Laboratory |BS |6 |Performs laboratory tests according to prescribed standards to determine |

|562910REM |Technician | | |chemical and physical characteristics or composition of solid, liquid, or|

| | | | |gaseous materials and substances for purposes such as quality control, |

| | | | |process control, product development, or determining conformity to |

| | | | |specifications. Sets up and adjusts laboratory apparatus and operates |

| | | | |grinders, agitators, centrifuges, ovens, condensers, and vibrating |

| | | | |screens to prepare material for testing according to established |

| | | | |laboratory procedure. Performs physical tests on samples of cement or raw|

| | | | |materials and controls quality of materials and mix during manufacturing |

| | | | |process. Tests raw materials, such as aggregate, limestone, and sand, for|

| | | | |such qualities as permeability, load-bearing capacity, or cohesiveness. |

| | | | |Tests dry and liquid substances used as ingredients in adhesives, |

| | | | |propellants, lubricants, refractories, synthetic rubber, paint, paper, |

| | | | |and other compounds for purity, viscosity, density, absorption or burning|

| | | | |rate, melting point, or flash point, using viscosimeter, torsion balance |

| | | | |scale, and pH meter. Tests solutions used in processes, such as |

| | | | |anodizing, waterproofing, cleaning, bleaching, and pickling, for chemical|

| | | | |strength, specific gravity, or other specifications. Tests materials for |

| | | | |presence and content of elements or substances, such as hydrocarbons, |

| | | | |manganese, natural grease or impurities, tungsten, sulfur, cyanide, ash |

| | | | |or dust. Tests samples of manufactured products, such as cellophane or |

| | | | |glassware, to verify conformity with heat resistance, tensile strength, |

| | | | |ductibility, and other specifications. Examines materials, using |

| | | | |microscope. Records test results on standard forms, writes test reports |

| | | | |describing procedures used, and prepares graphs and charts. Cleans and |

| | | | |sterilizes laboratory apparatus. May prepare chemical solutions according|

| | | | |to standard formulae. May add chemicals or raw materials to process |

| | | | |solutions or product batches to correct deviations from specifications. |

|541620 |Technical Writer |BA |2 |Develops, writes, and edits material for reports, manuals, briefs, |

|562910REM | | | |proposals, instruction books, catalogs, and related technical and |

| | | | |administrative publications concerned with work methods and procedures, |

| | | | |and installation, operation, and maintenance of machinery and other |

| | | | |equipment. Receives assignment from supervisor. Observes production, |

| | | | |developmental, and experimental activities to determine operating |

| | | | |procedure and detail. Interviews production and engineering personnel and|

| | | | |reads journals, reports, and other material to become familiar with |

| | | | |product technologies and production methods. Reviews manufacturer's and |

| | | | |trade catalogs, drawings and other data relative to operation, |

| | | | |maintenance, and service of equipment. Studies blueprints, sketches, |

| | | | |drawings, parts lists, specifications, mockups, and product samples to |

| | | | |integrate and delineate technology, operating procedure, and production |

| | | | |sequence and detail. Organizes material and completes writing assignment |

| | | | |according to set standards regarding order, clarity, conciseness, style, |

| | | | |and terminology. Reviews published materials and recommends revisions or |

| | | | |changes in scope, format, content, and methods of reproduction and |

| | | | |binding. May maintain records and files of work and revisions. May select|

| | | | |photographs, drawings, sketches, diagrams, and charts to illustrate |

| | | | |material. May assist in laying out material for publication. May arrange |

| | | | |for typing, duplication and distribution of material. May write speeches,|

| | | | |articles, and public or employee relations releases. May edit, |

| | | | |standardize, or make changes to material prepared by other writers or |

| | | | |plant personnel. May specialize in writing material regarding work |

| | | | |methods and procedures. |

|541620 |Truck Driver |None |1 |Straight truck, over 4 tons, usually 10 wheels. |

|562910REM | | | | |

|541620 |Sample Location |None |1 |Will capture coordinates of sample locations required for environmental |

|562910REM |Technician | | |cleanup action verification. Obtains data pertaining to angles, |

| | | | |elevations, points, and contours used for map making, mining, or other |

| | | | |purposes, using alidade, level, transit, plane table, theodolite, |

| | | | |electronic distance measuring equipment, and other surveying instruments.|

| | | | |Compiles notes, sketches, and records of data obtained and work |

| | | | |performed. Directs work of subordinate members of survey team |

|541620 |UXO Tech I (Regular|AA |0 |Responsible for properly storing MERC material in accordance with |

|562910REM |Time) | | |applicable guidance; Identifying fuses and determining fuse condition; |

| | | | |Performing field expedient identification procedures to identify |

| | | | |explosive contaminated soil; Preparing an on-site holding area for MERC |

| | | | |material; Operating modes of transportation for transporting MEC |

| | | | |material, when appropriate. |

| | | | | |

| | | | |Substitution Methodology - there is a special and mandatory education |

| | | | |requirement for this position exists and serves as the education |

| | | | |substitution for an AA degree. No one may perform these types of |

| | | | |services without having been formerly enlisted in the Armed Services and |

| | | | |unless being a Graduate of a certified Military EOD School or DoD |

| | | | |Certified UXO Training Program. |

|541620 |UXO Tech I (Regular|AA |0 |Responsible for properly storing MERC material in accordance with |

|562910REM |Time Avoidance) | | |applicable guidance; Identifying fuses and determining fuse condition; |

| | | | |Performing field expedient identification procedures to identify |

| | | | |explosive contaminated soil; Preparing an on-site holding area for MERC |

| | | | |material; Operating modes of transportation for transporting MEC |

| | | | |material, when appropriate. |

| | | | | |

| | | | |Substitution Methodology - there is a special and mandatory education |

| | | | |requirement for this position exists and serves as the education |

| | | | |substitution for an AA degree. No one may perform these types of |

| | | | |services without having been formerly enlisted in the Armed Services and |

| | | | |unless being a Graduate of a certified Military EOD School or DoD |

| | | | |Certified UXO Training Program. |

|541620 |UXO Tech I (Regular|AA |0 |Responsible for properly storing MERC material in accordance with |

|562910REM |Time Hazardous) | | |applicable guidance; Identifying fuses and determining fuse condition; |

| | | | |Performing field expedient identification procedures to identify |

| | | | |explosive contaminated soil; Preparing an on-site holding area for MERC |

| | | | |material; Operating modes of transportation for transporting MEC |

| | | | |material, when appropriate. |

| | | | | |

| | | | |Substitution Methodology - there is a special and mandatory education |

| | | | |requirement for this position exists and serves as the education |

| | | | |substitution for an AA degree. No one may perform these types of |

| | | | |services without having been formerly enlisted in the Armed Services and |

| | | | |unless being a Graduate of a certified Military EOD School or DoD |

| | | | |Certified UXO Training Program. |

|541620 |UXO Tech II |AA |3 |Responsible for properly storing MERC material in accordance with |

|562910REM |(Regular Time) | | |applicable guidance; Identifying fuses and determining fuse condition, |

| | | | |Determining a magnetic azimuth using current navigational and/or locating|

| | | | |equipment; Performing field expedient identification procedures to |

| | | | |identify explosive contaminated soil; Preparing an on-site holding area |

| | | | |for MERC material; Operating modes of transportation for transporting MEC|

| | | | |material, when appropriate. |

| | | | | |

| | | | |Substitution Methodology - there is a special and mandatory education |

| | | | |requirement for this position exists and serves as the education |

| | | | |substitution for an AA degree. No one may perform these types of |

| | | | |services without having been formerly enlisted in the Armed Services and |

| | | | |unless being a Graduate of a certified Military EOD School or DoD |

| | | | |Certified UXO Training Program. |

|541620 |UXO Tech II |AA |3 |Responsible for properly storing MERC material in accordance with |

|562910REM |(Regular Time | | |applicable guidance; Identifying fuses and determining fuse condition, |

| |Avoidance) | | |Determining a magnetic azimuth using current navigational and/or locating|

| | | | |equipment; Performing field expedient identification procedures to |

| | | | |identify explosive contaminated soil; Preparing an on-site holding area |

| | | | |for MERC material; Operating modes of transportation for transporting MEC|

| | | | |material, when appropriate. |

| | | | | |

| | | | |Substitution Methodology - there is a special and mandatory education |

| | | | |requirement for this position exists and serves as the education |

| | | | |substitution for an AA degree. No one may perform these types of |

| | | | |services without having been formerly enlisted in the Armed Services and |

| | | | |unless being a Graduate of a certified Military EOD School or DoD |

| | | | |Certified UXO Training Program. |

|541620 |UXO Tech II |AA |3 |Responsible for properly storing MERC material in accordance with |

|562910REM |(Regular Time | | |applicable guidance; Identifying fuses and determining fuse condition, |

| |Hazardous) | | |Determining a magnetic azimuth using current navigational and/or locating|

| | | | |equipment; Performing field expedient identification procedures to |

| | | | |identify explosive contaminated soil; Preparing an on-site holding area |

| | | | |for MERC material; Operating modes of transportation for transporting MEC|

| | | | |material, when appropriate. |

| | | | | |

| | | | |Substitution Methodology - there is a special and mandatory education |

| | | | |requirement for this position exists and serves as the education |

| | | | |substitution for an AA degree. No one may perform these types of |

| | | | |services without having been formerly enlisted in the Armed Services and |

| | | | |unless being a Graduate of a certified Military EOD School or DoD |

| | | | |Certified UXO Training Program. |

|541620 |UXO Tech III |AA |8 |Perform reconnaissance and classification of UXO; identification of U.S. |

|562910REM |(Regular Time) | | |and foreign guided missiles; bombs and bomb fuses; projectiles and |

| | | | |projectile fuses; grenades and grenade fuses; rockets and rocket fuses; |

| | | | |land mines and associated components; pyrotechnic items; military |

| | | | |explosives and demolition materials. Supervise: the location of |

| | | | |subsurface UXO using military and/or civilian magnetometers. Supervises |

| | | | |the excavation and recovery of subsurface UXO; construction of |

| | | | |UXO-related protective works; the location of surface UXO by visual |

| | | | |means; transporting and storing UXO assuring compliance with Federal, |

| | | | |state, and local laws; disposal of UXO by burning/detonation; preparation|

| | | | |of an UXO disposal site; preparation of an on-site safe holding area for |

| | | | |UXO. Determine UXO-related storage compatibility. Prepare an explosive |

| | | | |storage plan. Supervise donning and doffing of personal protective |

| | | | |equipment; operation of a personnel decontamination station; maintenance |

| | | | |and operator checks on all team equipment. Prepare UXO related |

| | | | |administrative reports; standard operating procedures. Conduct daily team|

| | | | |safety briefing. Supervise: segregation of UXO-related scrap from non-UXO|

| | | | |related scrap; safe handling procedures; team preventive medicine and |

| | | | |field sanitation procedures. Perform risk hazard analysis; interpret |

| | | | |x-ray of UXO. Supervise: field expedient identification procedures to ID |

| | | | |explosive contaminated soil; the determining of a magnetic azimuth using |

| | | | |a lensatic compass; emergency leak sealing and packaging of chemical |

| | | | |warfare material. |

| | | | | |

| | | | |Substitution Methodology - there is a special and mandatory education |

| | | | |requirement for this position exists and serves as the education |

| | | | |substitution for an AA degree. No one may perform these types of |

| | | | |services without having been formerly enlisted in the Armed Services and |

| | | | |unless being a Graduate of a certified Military EOD School or DoD |

| | | | |Certified UXO Training Program. |

|541620 |UXO Tech III |AA |8 |Perform reconnaissance and classification of UXO; identification of U.S. |

|562910REM |(Regular Time | | |and foreign guided missiles; bombs and bomb fuses; projectiles and |

| |Avoidance) | | |projectile fuses; grenades and grenade fuses; rockets and rocket fuses; |

| | | | |land mines and associated components; pyrotechnic items; military |

| | | | |explosives and demolition materials. Supervise: the location of |

| | | | |subsurface UXO using military and/or civilian magnetometers. Supervises |

| | | | |the excavation and recovery of subsurface UXO; construction of |

| | | | |UXO-related protective works; the location of surface UXO by visual |

| | | | |means; transporting and storing UXO assuring compliance with Federal, |

| | | | |state, and local laws; disposal of UXO by burning/detonation; preparation|

| | | | |of an UXO disposal site; preparation of an on-site safe holding area for |

| | | | |UXO. Determine UXO-related storage compatibility. Prepare an explosive |

| | | | |storage plan. Supervise donning and doffing of personal protective |

| | | | |equipment; operation of a personnel decontamination station; maintenance |

| | | | |and operator checks on all team equipment. Prepare UXO related |

| | | | |administrative reports; standard operating procedures. Conduct daily team|

| | | | |safety briefing. Supervise: segregation of UXO-related scrap from non-UXO|

| | | | |related scrap; safe handling procedures; team preventive medicine and |

| | | | |field sanitation procedures. Perform risk hazard analysis; interpret |

| | | | |x-ray of UXO. Supervise: field expedient identification procedures to ID |

| | | | |explosive contaminated soil; the determining of a magnetic azimuth using |

| | | | |a lensatic compass; emergency leak sealing and packaging of chemical |

| | | | |warfare material. |

| | | | | |

| | | | |Substitution Methodology - there is a special and mandatory education |

| | | | |requirement for this position exists and serves as the education |

| | | | |substitution for an AA degree. No one may perform these types of |

| | | | |services without having been formerly enlisted in the Armed Services and |

| | | | |unless being a Graduate of a certified Military EOD School or DoD |

| | | | |Certified UXO Training Program. |

|541620 |UXO Tech III |AA |8 |Perform reconnaissance and classification of UXO; identification of U.S. |

|562910REM |(Regular Time | | |and foreign guided missiles; bombs and bomb fuses; projectiles and |

| |Hazardous) | | |projectile fuses; grenades and grenade fuses; rockets and rocket fuses; |

| | | | |land mines and associated components; pyrotechnic items; military |

| | | | |explosives and demolition materials. Supervise: the location of |

| | | | |subsurface UXO using military and/or civilian magnetometers. Supervises |

| | | | |the excavation and recovery of subsurface UXO; construction of |

| | | | |UXO-related protective works; the location of surface UXO by visual |

| | | | |means; transporting and storing UXO assuring compliance with Federal, |

| | | | |state, and local laws; disposal of UXO by burning/detonation; preparation|

| | | | |of an UXO disposal site; preparation of an on-site safe holding area for |

| | | | |UXO. Determine UXO-related storage compatibility. Prepare an explosive |

| | | | |storage plan. Supervise donning and doffing of personal protective |

| | | | |equipment; operation of a personnel decontamination station; maintenance |

| | | | |and operator checks on all team equipment. Prepare UXO related |

| | | | |administrative reports; standard operating procedures. Conduct daily team|

| | | | |safety briefing. Supervise: segregation of UXO-related scrap from non-UXO|

| | | | |related scrap; safe handling procedures; team preventive medicine and |

| | | | |field sanitation procedures. Perform risk hazard analysis; interpret |

| | | | |x-ray of UXO. Supervise: field expedient identification procedures to ID |

| | | | |explosive contaminated soil; the determining of a magnetic azimuth using |

| | | | |a lensatic compass; emergency leak sealing and packaging of chemical |

| | | | |warfare material. |

| | | | | |

| | | | |Substitution Methodology - there is a special and mandatory education |

| | | | |requirement for this position exists and serves as the education |

| | | | |substitution for an AA degree. No one may perform these types of |

| | | | |services without having been formerly enlisted in the Armed Services and |

| | | | |unless being a Graduate of a certified Military EOD School or DoD |

| | | | |Certified UXO Training Program. |

|541620 |UXO SO/QC (Regular |AA |8 |The UXO Safety Officer is responsible for establishing, implementing and |

|562910REM |Time) | | |executing an effective Contractor explosive and UXO safety program for |

| | | | |the investigation and response actions, in compliance with all applicable|

| | | | |Federal, DOD, State and local regulations and the requirements, |

| | | | |Responsibilities includes but are not limited to: direct supervision of |

| | | | |all UXO safety personnel; analyzing UXO and explosive operations risks, |

| | | | |hazards and safety requirements; establishing and enforcing safety |

| | | | |requirements for all UXO related operations; safety planning, execution |

| | | | |and oversight for UXO and explosive operations; establishment of Standard|

| | | | |Operating Procedures (SOPs) for all UXO related activities including |

| | | | |search, detection, access, identification, transportation, centralized |

| | | | |storage, disposal, treatment, scrap certification, HERO analysis, etc.; |

| | | | |establishment, posting and enforcement of personnel limits, safety zones,|

| | | | |and exclusion zones surrounding UXO field activities, explosive |

| | | | |activities, UXO transfer and holding areas; executing an effective |

| | | | |explosive safety program including UXO safety, explosive storage, |

| | | | |quantity-distance safety arcs, explosive transportation, operational |

| | | | |procedures, operational personnel qualifications and certification, |

| | | | |hazard and risk analysis, and safety assessment of UXO and explosive |

| | | | |operations. Additionally, the UXOSO is responsible for the analysis and |

| | | | |establishment of Personal Protective Equipment (PPE) requirements for all|

| | | | |UXO reacted tasks and activities as part of the activity/task risk hazard|

| | | | |analysis. |

| | | | | |

| | | | |Substitution Methodology - there is a special and mandatory education |

| | | | |requirement for this position exists and serves as the education |

| | | | |substitution for an AA degree. No one may perform these types of |

| | | | |services without having been formerly enlisted in the Armed Services and |

| | | | |unless being a Graduate of a certified Military EOD School or DoD |

| | | | |Certified UXO Training Program. |

|541620 |UXO SO/QC (Regular |AA |8 |The UXO Safety Officer is responsible for establishing, implementing and |

|562910REM |Time Avoidance) | | |executing an effective Contractor explosive and UXO safety program for |

| | | | |the investigation and response actions, in compliance with all applicable|

| | | | |Federal, DOD, State and local regulations and the requirements, |

| | | | |Responsibilities includes but are not limited to: direct supervision of |

| | | | |all UXO safety personnel; analyzing UXO and explosive operations risks, |

| | | | |hazards and safety requirements; establishing and enforcing safety |

| | | | |requirements for all UXO related operations; safety planning, execution |

| | | | |and oversight for UXO and explosive operations; establishment of Standard|

| | | | |Operating Procedures (SOPs) for all UXO related activities including |

| | | | |search, detection, access, identification, transportation, centralized |

| | | | |storage, disposal, treatment, scrap certification, HERO analysis, etc.; |

| | | | |establishment, posting and enforcement of personnel limits, safety zones,|

| | | | |and exclusion zones surrounding UXO field activities, explosive |

| | | | |activities, UXO transfer and holding areas; executing an effective |

| | | | |explosive safety program including UXO safety, explosive storage, |

| | | | |quantity-distance safety arcs, explosive transportation, operational |

| | | | |procedures, operational personnel qualifications and certification, |

| | | | |hazard and risk analysis, and safety assessment of UXO and explosive |

| | | | |operations. Additionally, the UXOSO is responsible for the analysis and |

| | | | |establishment of Personal Protective Equipment (PPE) requirements for all|

| | | | |UXO reacted tasks and activities as part of the activity/task risk hazard|

| | | | |analysis. |

| | | | | |

| | | | |Substitution Methodology - there is a special and mandatory education |

| | | | |requirement for this position exists and serves as the education |

| | | | |substitution for an AA degree. No one may perform these types of |

| | | | |services without having been formerly enlisted in the Armed Services and |

| | | | |unless being a Graduate of a certified Military EOD School or DoD |

| | | | |Certified UXO Training Program. |

|541620 |UXO SO/QC (Regular |AA |8 |The UXO Safety Officer is responsible for establishing, implementing and |

|562910REM |Time Hazardous) | | |executing an effective Contractor explosive and UXO safety program for |

| | | | |the investigation and response actions, in compliance with all applicable|

| | | | |Federal, DOD, State and local regulations and the requirements, |

| | | | |Responsibilities includes but are not limited to: direct supervision of |

| | | | |all UXO safety personnel; analyzing UXO and explosive operations risks, |

| | | | |hazards and safety requirements; establishing and enforcing safety |

| | | | |requirements for all UXO related operations; safety planning, execution |

| | | | |and oversight for UXO and explosive operations; establishment of Standard|

| | | | |Operating Procedures (SOPs) for all UXO related activities including |

| | | | |search, detection, access, identification, transportation, centralized |

| | | | |storage, disposal, treatment, scrap certification, HERO analysis, etc.; |

| | | | |establishment, posting and enforcement of personnel limits, safety zones,|

| | | | |and exclusion zones surrounding UXO field activities, explosive |

| | | | |activities, UXO transfer and holding areas; executing an effective |

| | | | |explosive safety program including UXO safety, explosive storage, |

| | | | |quantity-distance safety arcs, explosive transportation, operational |

| | | | |procedures, operational personnel qualifications and certification, |

| | | | |hazard and risk analysis, and safety assessment of UXO and explosive |

| | | | |operations. Additionally, the UXOSO is responsible for the analysis and |

| | | | |establishment of Personal Protective Equipment (PPE) requirements for all|

| | | | |UXO reacted tasks and activities as part of the activity/task risk hazard|

| | | | |analysis. |

| | | | | |

| | | | |Substitution Methodology - there is a special and mandatory education |

| | | | |requirement for this position exists and serves as the education |

| | | | |substitution for an AA degree. No one may perform these types of |

| | | | |services without having been formerly enlisted in the Armed Services and |

| | | | |unless being a Graduate of a certified Military EOD School or DoD |

| | | | |Certified UXO Training Program. |

|541620 |SUXOS (Regular |AA |10 |Responsible for the safety of all operations from munitions activities to|

|562910REM |Time) | | |standard slip, trip and fall safety, Responsible for the security of all |

| | | | |personnel and assets under his charge either in the depot itself or at |

| | | | |all sites assigned and all convoy operations in between; Responsible for |

| | | | |the health and welfare of all assigned personnel within his charge; |

| | | | |Responsible for the equipment maintenance and inventory accuracy of all |

| | | | |equipment assigned, Responsible for the inventory accuracy and |

| | | | |accountability of all munitions assets in the depot and ancillary sites; |

| | | | |Responsible for the coordinate site operations and activities with local |

| | | | |authorities and contacts; Supervises the excavation and recovery of |

| | | | |subsurface UXO; construction of UXO-related protective works; the |

| | | | |location of surface UXO by visual means; transporting and storing UXO |

| | | | |assuring compliance with Federal, state, and local laws; disposal of UXO |

| | | | |by burning/detonation; preparation of an UXO disposal site; preparation |

| | | | |of an on-site safe holding area for UXO. Determine UXO-related storage |

| | | | |compatibility; Prepare an explosive storage plan. Supervise donning and |

| | | | |doffing of personal protective equipment; operation of a personnel |

| | | | |decontamination station; maintenance and operator checks on all team |

| | | | |equipment. Prepare UXO related administrative reports; standard operating|

| | | | |procedures. |

| | | | | |

| | | | |Substitution Methodology - there is a special and mandatory education |

| | | | |requirement for this position exists and serves as the education |

| | | | |substitution for an AA degree. No one may perform these types of |

| | | | |services without having been formerly enlisted in the Armed Services and |

| | | | |unless being a Graduate of a certified Military EOD School or DoD |

| | | | |Certified UXO Training Program. |

|541620 |SUXOS (Regular Time|AA |10 |Responsible for the safety of all operations from munitions activities to|

|562910REM |Avoidance) | | |standard slip, trip and fall safety, Responsible for the security of all |

| | | | |personnel and assets under his charge either in the depot itself or at |

| | | | |all sites assigned and all convoy operations in between; Responsible for |

| | | | |the health and welfare of all assigned personnel within his charge; |

| | | | |Responsible for the equipment maintenance and inventory accuracy of all |

| | | | |equipment assigned, Responsible for the inventory accuracy and |

| | | | |accountability of all munitions assets in the depot and ancillary sites; |

| | | | |Responsible for the coordinate site operations and activities with local |

| | | | |authorities and contacts; Supervises the excavation and recovery of |

| | | | |subsurface UXO; construction of UXO-related protective works; the |

| | | | |location of surface UXO by visual means; transporting and storing UXO |

| | | | |assuring compliance with Federal, state, and local laws; disposal of UXO |

| | | | |by burning/detonation; preparation of an UXO disposal site; preparation |

| | | | |of an on-site safe holding area for UXO. Determine UXO-related storage |

| | | | |compatibility; Prepare an explosive storage plan. Supervise donning and |

| | | | |doffing of personal protective equipment; operation of a personnel |

| | | | |decontamination station; maintenance and operator checks on all team |

| | | | |equipment. Prepare UXO related administrative reports; standard operating|

| | | | |procedures. |

| | | | | |

| | | | |Substitution Methodology - there is a special and mandatory education |

| | | | |requirement for this position exists and serves as the education |

| | | | |substitution for an AA degree. No one may perform these types of |

| | | | |services without having been formerly enlisted in the Armed Services and |

| | | | |unless being a Graduate of a certified Military EOD School or DoD |

| | | | |Certified UXO Training Program. |

|541620 |SUXOS (Regular Time|AA |10 |Responsible for the safety of all operations from munitions activities to|

|562910REM |Hazardous) | | |standard slip, trip and fall safety, Responsible for the security of all |

| | | | |personnel and assets under his charge either in the depot itself or at |

| | | | |all sites assigned and all convoy operations in between; Responsible for |

| | | | |the health and welfare of all assigned personnel within his charge; |

| | | | |Responsible for the equipment maintenance and inventory accuracy of all |

| | | | |equipment assigned, Responsible for the inventory accuracy and |

| | | | |accountability of all munitions assets in the depot and ancillary sites; |

| | | | |Responsible for the coordinate site operations and activities with local |

| | | | |authorities and contacts; Supervises the excavation and recovery of |

| | | | |subsurface UXO; construction of UXO-related protective works; the |

| | | | |location of surface UXO by visual means; transporting and storing UXO |

| | | | |assuring compliance with Federal, state, and local laws; disposal of UXO |

| | | | |by burning/detonation; preparation of an UXO disposal site; preparation |

| | | | |of an on-site safe holding area for UXO. Determine UXO-related storage |

| | | | |compatibility; Prepare an explosive storage plan. Supervise donning and |

| | | | |doffing of personal protective equipment; operation of a personnel |

| | | | |decontamination station; maintenance and operator checks on all team |

| | | | |equipment. Prepare UXO related administrative reports; standard operating|

| | | | |procedures. |

| | | | | |

| | | | |Substitution Methodology - there is a special and mandatory education |

| | | | |requirement for this position exists and serves as the education |

| | | | |substitution for an AA degree. No one may perform these types of |

| | | | |services without having been formerly enlisted in the Armed Services and |

| | | | |unless being a Graduate of a certified Military EOD School or DoD |

| | | | |Certified UXO Training Program. |

|541620 |UXO Program HSM |MS |7 |Ensuring compliance with Health and Safety/ Quality requirements; Utilize|

|562910REM |(Regular Time) | | |program management skills to make significant contributions to business |

| | | | |development and proposal efforts, as well as business case documentation;|

| | | | |Prepares project reports for management, client, or others; Supervise, |

| | | | |direct, and manage the quality control staff on technical compliance and |

| | | | |support for program and project goals; Provide assessment and |

| | | | |construction quality assurance and health and safety support to Project |

| | | | |Managers to ensure projects are performed correctly and completed on |

| | | | |time; Ensure that all personnel assigned to project sites have the |

| | | | |training and certifications required. |

|541620 |UXO Program HSM |MS |7 |Ensuring compliance with Health and Safety/ Quality requirements; Utilize|

|562910REM |(Regular Time | | |program management skills to make significant contributions to business |

| |Avoidance) | | |development and proposal efforts, as well as business case documentation;|

| | | | |Prepares project reports for management, client, or others; Supervise, |

| | | | |direct, and manage the quality control staff on technical compliance and |

| | | | |support for program and project goals; Provide assessment and |

| | | | |construction quality assurance and health and safety support to Project |

| | | | |Managers to ensure projects are performed correctly and completed on |

| | | | |time; Ensure that all personnel assigned to project sites have the |

| | | | |training and certifications required. |

|541620 |UXO Program HSM |MS |7 |Ensuring compliance with Health and Safety/ Quality requirements; Utilize|

|562910REM |(Regular Time | | |program management skills to make significant contributions to business |

| |Hazardous) | | |development and proposal efforts, as well as business case documentation;|

| | | | |Prepares project reports for management, client, or others; Supervise, |

| | | | |direct, and manage the quality control staff on technical compliance and |

| | | | |support for program and project goals; Provide assessment and |

| | | | |construction quality assurance and health and safety support to Project |

| | | | |Managers to ensure projects are performed correctly and completed on |

| | | | |time; Ensure that all personnel assigned to project sites have the |

| | | | |training and certifications required. |

|541620 |Senior Geophysicist|BS |8 |Coordination and oversight of all QC audits of the following; Geophysical|

|562910REM | | | |data acquisition; Data transfer techniques; Data processing techniques; |

| | | | |Database management; Data storage and archival; QC field investigations |

| | | | |to confirm / deny the validity of QC targets found during QC reprocessing|

| | | | |of the geophysical data collected by the geophysical contractor; |

| | | | |Coordinating and directing activities of QC personnel, including setting |

| | | | |and enforcing the schedules required to achieve 100% certification of |

| | | | |every Area of Concern (AOC) prior to demobilization; Testing of |

| | | | |geophysical subcontractor teams through test grids to verify that |

| | | | |equipment, personnel, and processing techniques were able to meet the |

| | | | |contractual requirements as stated in the SOW; Coordination of QC field |

| | | | |team efforts to ensure consistency of performance and maintenance of |

| | | | |established schedules between the QC staff and geophysical subcontractor |

| | | | |personnel; Provided technical leadership in the discipline of geophysics,|

| | | | |GPS positioning, statistics, and QC (re-processing) of geophysical data; |

| | | | |Routinely perform Root-Cause analysis to find the source of errors / |

| | | | |discrepancies that arose during the duration of the project; Creation of|

| | | | |the AOC Certification Files / QC section of the After Action Report. |

|541620 |UXO Project |AA |10 |Responsible for the safety of all operations from munitions activities to|

|562910REM |Superintendent | | |standard slip, trip and fall safety; Responsible for the security of all |

| | | | |personnel and assets under his charge either in the depot itself or at |

| | | | |all sites assigned and all convoy operations in between; Responsible for |

| | | | |the health and welfare of all assigned personnel within his charge; |

| | | | |Responsible for the equipment maintenance and inventory accuracy of all |

| | | | |equipment assigned; Responsible for the inventory accuracy and |

| | | | |accountability of all munitions assets in the depot and ancillary sites; |

| | | | |Responsible for the coordinate site operations and activities with local |

| | | | |authorities and contacts; Supervises the excavation and recovery of |

| | | | |subsurface UXO; construction of UXO-related protective works; the |

| | | | |location of surface UXO by visual means; transporting and storing UXO |

| | | | |assuring compliance with Federal, state, and local laws; disposal of UXO |

| | | | |by burning/detonation; preparation of an UXO disposal site; preparation |

| | | | |of an on-site safe holding area for UXO. Determine UXO-related storage |

| | | | |compatibility; Prepare an explosive storage plan. Supervise donning and |

| | | | |doffing of personal protective equipment; operation of a personnel |

| | | | |decontamination station; maintenance and operator checks on all team |

| | | | |equipment. Prepare UXO related administrative reports; standard operating|

| | | | |procedures. |

| | | | | |

| | | | |Substitution Methodology - there is a special and mandatory education |

| | | | |requirement for this position exists and serves as the education |

| | | | |substitution for an AA degree. No one may perform these types of |

| | | | |services without having been formerly enlisted in the Armed Services and |

| | | | |unless being a Graduate of a certified Military EOD School or DoD |

| | | | |Certified UXO Training Program. |

|541620 |UXO Project Manager|BA |4 |Directing work associated with assigned CTOs; Ensuring effective |

|562910REM | | | |execution of projects; Controlling project schedule and budget; |

| | | | |Recommending changes to improve project efficiency and effectiveness; |

| | | | |Justifying change orders; Tracking materials and resources; Coordinating |

| | | | |subcontractor’s work; Complying with normal health and safety procedures;|

| | | | |Ensuring compliance with regulatory requirements; Following/implementing |

| | | | |approval project work plans or specifications; Producing quality |

| | | | |technical reports supporting the remedial action with respect to the |

| | | | |appropriate regulatory authority. |

|541620 |UXO Program Manager|BA |20 |Plans, directs, and coordinates activities of designated project to |

|562910REM | | | |ensure that goals or objectives of project are accomplished within |

| | | | |prescribed time frame and funding parameters; Reviews project proposal or|

| | | | |plan to determine time frame, funding limitations, procedures for |

| | | | |accomplishing project, staffing requirements, and allotment of available |

| | | | |resources to various phases of project; Establishes work plan and |

| | | | |staffing for each phase of project, and arranges for recruitment or |

| | | | |assignment of project personnel; Confers with project staff to outline |

| | | | |work plan and to assign duties, responsibilities, and scope of authority;|

| | | | |Directs and coordinates activities of project personnel to ensure project|

| | | | |progresses on schedule and within prescribed budget; Reviews status |

| | | | |reports prepared by project personnel and modifies schedules or plans as |

| | | | |required; Prepares project reports for management, client, or others; |

| | | | |Confers with project personnel to provide technical advice and to resolve|

| | | | |problems; Coordinates project activities with activities of government |

| | | | |regulatory or other governmental agencies. |

|541620 |UXO Program QC |MS |7 |Supervise, direct, and manage the Denver technical writing staff and |

|562910REM |Manager | | |quality control staff on technical compliance and support for program and|

| | | | |project goals; Ensure a group billability rate of 85% or greater; Ensure |

| | | | |quality assurance documents are technically correct; Provide assessment |

| | | | |and construction quality assurance and health and safety support to |

| | | | |Project Managers to ensure projects are performed correctly and completed|

| | | | |on time; Ensure that all personnel assigned to project sites have the |

| | | | |training and certifications required; Ensure compliance with all |

| | | | |regulatory and permitting issues; Community Interaction; Prepare and/or |

| | | | |direct the preparation of quality assurance documents such as: Quality |

| | | | |Assurance Project Plans, Sampling and Analysis Plans, and Chemical Data |

| | | | |Acquisition Plans; Prepare or assist in the preparation of Health and |

| | | | |Safety Plans; Direct the implementation of quality assurance policies and|

| | | | |procedures in the field and office; Perform quality control of field |

| | | | |investigation and construction activities as well as required reports; |

| | | | |Design sampling events and evaluate new and emerging sampling |

| | | | |methodologies and technologies; Model/prepare analysis of sampling data |

| | | | |per project requirements; Perform hydrogeologic assessments; Perform |

| | | | |technical and editorial quality assurance reviews of draft and final |

| | | | |documents; Assist in the preparation of proposals. |

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download