MATERIAL SAFETY DATA SHEET - APD | Products

MATERIAL SAFETY DATA SHEET

ChemLine 784/32 PC ? Part A (Resin)

Revision Number 1.0 Revision Date April 2, 2012

SECTION 1 ? PRODUCT / SUBSTANCE AND COMPANY IDENTIFICATION

Product Name: Product Number: Manufacturer:

Address: Phone Number: Fax Number: CHEMTREC:

ChemLine 784/32 PC 784 PC Advanced Polymer Coatings, Ltd. 951 Jaycox Rd. --- Avon, Ohio 44011 U.S.A. {+01} 440 / 937-6218 [toll free 800-334-7193] {+01} 440 / 937-5046 [toll free 800-615-0233] {+01} 730 / 527-3887 [toll free 800-424-9300]

C.A.S. Chemical Name: Synonyms: Intended Use: Application Method: Previous Revision Date:

Polyglycidal Ether of Poly (4-Hydroxystyrene B) 4-Glycidal Ether Phenyl Methyl Carbinol Homopolymer See Technical Data Sheet. For Professional Use Only. See Application Specifications. For Professional Use Only. N/A

HMIS Health Rating 1

Flammability 1

Reactivity 0

SECTION 2 ? COMPOSITION / INFORMATION OF INGREDIENTS

#

Chemical Name

1.

Novolac Epoxy Polymer

2.

Quartz

3a. Titanium Dioxide (present in white or gray color only)

3b. Red Iron Oxide (present in red color only)

4.

Fumed Silica, amorphous, hydrophilic

CAS Number

28064-14-4 14808-60-7 13463-67-7 1332-37-2 67762-90-7

%

40.0 ? 75.0 20.0 ? 45.0

< 3.0 < 2.0 < 2.0

OSHA (ACGIH) Exposure Limits

PEL

ppm

mg/m3

1.

N/E

N/E

2.

N/E

N/E

3a..

N/E

N/E

3b.

N/E

N/E

4.

N/E

N/E

N/E = Not Established

TLV

ppm

mg/m3

N/E

N/E

N/E

N/E

N/E

N/E

N/E

N/E

N/E

N/E

TWA

ppm

mg/m3

N/E

N/E

N/E

N/E

N/E

N/E

N/E

N/E

N/E

N/E

24 HOUR EMERGENCY NUMBER: PRODUCT INFORMATION:

800-424-9300 (toll free within Continental U.S.) 703-527-3887 (outside Continental U.S. ? may be called collect) 440-937-6218

800-334-7193

Page 1 of 7

MATERIAL SAFETY DATA SHEET

ChemLine 784/32 PC ? Part A (Resin)

Revision Number 1.0 Revision Date April 2, 2012

SECTION 3 ? HAZARD IDENTIFICATION

Hazards:

Harmful if swallowed. Moderate eye irritant. Skin irritant. May cause skin sensitization. Moderate respiratory tract irritant.

Extinguishing Media: Routes of Exposure

Carbon Dioxide (CO2), Foam, Dry Chemical or Water Fog

Ingestion Eye Contact Skin Contact

Exposure Standards No standards established for the product. Maintain air contaminant concentrations in the workplace at the lowest feasible levels.

Health Hazards

Harmful if swallowed. Moderate respiratory tract irritant. Corrosive to eyes. Severe eye irritant. Severe skin irritant. May cause skin sensitization.

Target Organs

Eye, Skin, Respiratory system

Signs and Symptoms of Exposure (Acute effects) Inhalation of vapors may cause irritation in the respiratory tract. Contact of undiluted product with: Eyes; moderately irritating Skin; mildly irritating to skin, prolonged or repeated contact can result in defatting and drying of the skin which may result in skin irritation and dermatitis.

Signs and Symptoms of Exposure (Possible longer term effects) Repeated and or prolonged exposure may cause allergic reaction and sensitization. Repeated and or prolonged exposure may result in: adverse respiratory effects (such as cough, tightness of chest or shortness of breath), adverse skin effects (such as rash, irritation or dermatitis).

Medical Conditions Generally Aggravated by Exposure Chronic respiratory disease (e.g. Asthma, Bronchitis, Emphysema) Eye disease. Skin disorders and Allergies.

Carcinogens Under OSHA, ACGIH, NTP, IARC, Other This product contains no carcinogens.

24 HOUR EMERGENCY NUMBER: PRODUCT INFORMATION:

800-424-9300 (toll free within Continental U.S.) 703-527-3887 (outside Continental U.S. ? may be called collect) 440-937-6218

800-334-7193

Page 2 of 7

MATERIAL SAFETY DATA SHEET

ChemLine 784/32 PC ? Part A (Resin)

Revision Number 1.0 Revision Date April 2, 2012

SECTION 4 ? FIRST AID MEASURES

Eye Contact Hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes. Seek medical advice.

Skin Contact Remove product and immediately wash affected area with soap and water. Rinse thoroughly. Remove contaminated clothing and shoes. Launder contaminated clothing prior to reuse. If necessary, seek medical advice.

Inhalation Move patient to fresh air. If breathing has stopped or is labored give assisted respiration (e.g. mouth-to-mouth). Prevent aspiration of vomit. Turn victim's head to the side. Seek medical advice.

Ingestion If conscious, administer water to drink - DO NOT INDUCE VOMITING. Never give anything by mouth to an unconscious person. Seek medical advice.

Note to Physician Treat symptomatically as required by the condition of the patient.

SECTION 5 ? FIRE FIGHTING MEASURES

Flash Point (closed cup)

>200?F. (94?C.)

Autoignition Temperature

997?F. (535?C.)

Extinguishing Media Carbon Dioxide (CO2), Foam, Dry Chemical or Water Fog

Fire Fighting Instructions Isolate the hazard and evacuate the area. As best as possible, stay upwind and fight the fire from the maximum distance. Use water spray to cool containers and fire exposed surfaces. Shut off fuel to fire if possible without hazard.

Fire Fighting Equipment Wear self-contained breathing apparatus. Wear a face shield. Wear complete personal protective equipment including butyl rubber boots, gloves, and body suit.

Unusual Fire and Explosion Hazards None known.

24 HOUR EMERGENCY NUMBER: PRODUCT INFORMATION:

800-424-9300 (toll free within Continental U.S.) 703-527-3887 (outside Continental U.S. ? may be called collect) 440-937-6218

800-334-7193

Page 3 of 7

MATERIAL SAFETY DATA SHEET

ChemLine 784/32 PC ? Part A (Resin)

Revision Number 1.0 Revision Date April 2, 2012

SECTION 6 ? ACCIDENTAL RELEASE MEASURES

Spill or Leak Procedures: Avoid eye or skin contact. Shut off or remove all ignition sources. Stop the leak, if possible. Construct a dike to prevent spreading. In case of a major spill or spillage in a confined space evacuate the area. Check solvent vapor levels before re-entering.

Clean-Up Procedures Absorb spillage with non-reactive, non-combustible materials, e.g. dry soil, sand, vermiculite. Place in appropriate chemical waste container. Incinerate under controlled conditions and dispose of in an approved landfill. Flush area with water spray. Clean-up personnel must be equipped with self-contained breathing apparatus and butyl rubber protective clothing.

Other Emergency Advice Wear protective clothing, boots, gloves, and eye protection.

SECTION 7 ? HANDLING AND STORAGE

Storage Handle containers carefully to prevent damage and spillage. Material should be kept in original containers. Keep in cool, dry, ventilated storage and in closed container. Smoking, high heat and open flames should not be permitted in storage areas. Storage area to be adequately ventilated.

Handling Avoid contact with skin or eyes. Avoid breathing of vapors. Use personal protection as shown in Section 8. Handle in well-ventilated workspace. When handling, do not eat, drink or smoke.

SECTION 8 ? EXPOSURE CONTROLS / PERSONAL PROTECTION

General Ventilation:

Required in both external and enclosed areas.

Local Exhaust:

External Areas: Enclosed Areas:

Recommended Required

24 HOUR EMERGENCY NUMBER: PRODUCT INFORMATION:

800-424-9300 (toll free within Continental U.S.) 703-527-3887 (outside Continental U.S. ? may be called collect) 440-937-6218

800-334-7193

Page 4 of 7

MATERIAL SAFETY DATA SHEET

ChemLine 784/32 PC ? Part A (Resin)

Revision Number 1.0 Revision Date April 2, 2012

Respiratory Protection:

Eye Protection Hand Protection Protective Clothing Engineering Controls Work and Hygienic Controls

External Areas: Enclosed Areas:

Gas & Vapor removing, air purifying respirator (cartridge)

Full face, positive pressure demand type (supplied air mask)

Chemical goggles or full face shield and safety glasses with side shields

Impermeable gloves. Neoprene rubber gloves. Cuffed butyl rubber gloves. Nitrile rubber gloves.

Impervious clothing. Tyvek or Saranex Suit.

No specific controls needed.

Provide readily accessible eye wash stations and safety showers. Wash at the end of each workshift and before eating, smoking, or using the toilet. Promptly remove clothing that becomes contaminated. Discard saturated leather articles.

SECTION 9 ? TYPICAL PHYSICAL AND CHEMICAL PROPERTIES

Physical Form Color (standard) Odor pH Specific Gravity (H2O = 1.0) Decomposition Temperature: Solubility in Water Percent Volatiles by Volume: Viscosity:

Mobile liquid White, Gray or Red (based on pigment) Aromatic benzene-like odor CA. 7 1.41 240?C. Insoluble 11% (+3%) 6,000 cPs (+1,000)

SECTION 10 ? STABILITY AND REACTIVITY

Chemical Stability: Conditions to Avoid: Incompatibility (Materials to Avoid): Hazardous Polymerization: Hazardous Decomposition Products:

Stable Avoid storage at elevated temperatures Strong Oxidizers, acids and caustics Will autopolymerize at very high temperatures Carbon monoxide, Carbon dioxide

24 HOUR EMERGENCY NUMBER: PRODUCT INFORMATION:

800-424-9300 (toll free within Continental U.S.) 703-527-3887 (outside Continental U.S. ? may be called collect) 440-937-6218

800-334-7193

Page 5 of 7

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download