Bill Tobin has been a professional in Plastics for more ...



Bill Tobin has been a professional in Plastics for more than 30 years. Bill has written more than 20 books and 250+ published articles. He is a frequent presenter and trainer at conventions and professional functions. His consulting firm WJT Associates provides services in all areas of injection molding as well as expert witness testimony.

The seminar is designed to give a better understanding of the injection molding process. Scientific Molding is not about transducers and signal processors. It requires a full understanding of the molding process from beginning to end. The seminar is very interactive with the class. It is presented in a light-hearted manner that is enjoyable to everyone.

In-house savings:

If you are considering sending more than three people AND traveling more than 200 miles to attend the seminar; contact us. It is probably cheaper for us to come to you and put on a seminar for more than 10 people at the same cost.

We’d be glad to entertain other locations for this seminar upon your suggestions.

Ideal for:

Setup Technicians

Troubleshooting Technicians

First (possibly second) level supervision

Maintenance Technicians

Process Engineering

Quality Control

Tool and Die Personnel

Expected Outcomes:

Optimized cycles times from the beginning

Maximum utilization of your equipment

A more professional workforce focused on productivity and profit

New tooling startups that don’t need to ‘be processed in’, or start with high scrap rates

Less miscommunication on standards

Lower initial and on going defects

Repeatable Quality

Be able to put the Science in to Scientific Molding. Learn how to do the experiments to OPTIMIZE your cycle;

• Optimized waterline hookups

• Setting the clamp pressure

• Setting the distances

• Optimizing fill

• Optimizing pack

• Optimizing cool

• Heat profiles

Construct a universal setup sheet that gives you the process settings automatically from one machine to another without having to start from scratch. Learn how to determine if you have a robust machine.

Learn when to submit samples to your customer.

QUALITY – take out the guess work. Learn how to define

• Cosmetics

• Function

• Dimensions

• The Universal Definition of Quality

What “acceptable” REALLY is

[pic]

Details

Tuition $300.00 each

Buy 3 get 4th Free

Note: A minimum attendance must be achieved for the seminar to go forward. You will be notified by e-mail one week before as to the status. Credit cards will not be charge nor checks cashed until the seminar‘s minimum has been met.

8:30 AM to 4:30 PM Breaks and lunch (pizza) provided. Please arrive 8:15 - 8:30

Each attendee will get the book SCIENTIFIC MOLDING and CD with experiments, explanations and procedures INSTRUCTIONS: - FILL IN GREY CELLS, SAVE, E-MAIL

Scientific Molding with Bill Tobin:

Seminar we will attend (from list below)      

|SEMINAR LOCATION |Cutoff date |Price |

|ST. LOUIS, MO NOV 15th 2018 La Quinta Inn & Suites St. Louis Airport - Riverport Drive I-70 &|7-Nov |$300 |

|Earth City Expswy ,Maryland Heights MO | | |

|CLEVELAND, OH NOV 19TH 2018 Comfort Inn Cleveland Airport 17550 Rosbough Dr., Middleburg |12-Nov |$300 |

|Heights, OH, 44130 | | |

|SEMINAR LOCATION |Cutoff |Price |

| |date | |

|4/21/2015 La Quinta Inn & Suites Portland Airport 11207 Northeast Holman St Portland, OR 97220 |14-Apr |$300 |

|4/23/2015 Best Western Northwest Lodge 6989 S Federal Way Boise, ID 83716 |14-Apr |$300 |

|13 May La Quinta Inn & Suites Orlando Airport North 7160 N Frontage Rd Orlando, FL 32812 |7-May |$300 |

|15 May Fairfield Inn & Suites Miami Airport South 4101 NW 11th St Miami, FL 33126 |7-May |$300 |

|27 May Holiday Inn Express & Suites DFW North, 4550 West John Carpenter Frwy, Iriving TX 75063 |20-May |$300 |

|1 June Homewood Suites Houston, 2424 Rogerdale Rd, Houston, TX 77042 |25-May |$300 |

Buy 3 get 4th Free

Note: A minimum attendance must be achieved for the seminar to go forward. You will be notified by e-mail one week before as to the status. Credit cards will not be charge nor checks cashed until the seminar‘s minimum has been met. (Visa or MasterCard preferred). You are advised against booking travel reservations until the class will go forward.

Name on credit card      

Card number            exp date       (mm/yy)       CVV#      

Company       City       State      Zip code     

Phone       e-mail      

So you can be contacted as to the status of the seminar

Date email sent (for cut-off date purposes)           

Instructions: Fill in information save file and email or Print file, Scan and e-mail

If you are concerned about giving your credit card information on the internet, send it in two separate e-mails.

e-mail - bill4012@ SUBJECT - SCIENTIFIC MOLDING SEMINAR

Phone with questions 303 604 9592

Name of attendees Job Title Email

1.                 

2.                  

3.                  

4.                  

5.                   Use additional sheet if necessary     

-----------------------

[pic]

WHERE WHEN

NOV 15th 2018April 21

La Quinta Inn & Suites Portland Airport 11207 Northeast Holman St Portland, OR 97220

April 23

Best Western Northwest Lodge 6989 S Federal Way Boise, ID 83716

13-May

La Quinta Inn & Suites Orlando Airport North

7160 N Frontage Rd

Orlando, FL 32812

(407) 240-5000

15-May

Fairfield Inn & Suites Miami Airport South

4101 NW 11th St

Miami, FL 33126

(786) 456-2100

27 May 2015

Holiday Inn Express & Suites

Irving DFW Airport North

4550 West John W Carpenter Freeway

Irving, TX 75063

(972) 929-4499

1June 2015

Homewood suites Houston

2424 Rogerdale Road, 

Houston, Texas,77042 

713-334-2424St. Louis

La Quinta Inn & Suites St. Louis Airport -

Riverport

Riverport Drive I-70 & Earth City Expswy

Maryland Heights MO

NOV 19TH 2018

Cleveland

Comfort Inn Cleveland Airport

17550 Rosbough Dr., Middleburg Heights, OH, 44130

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download