ISO 1151-2:1985



Basic and Generality 2012 PLANS.NOProject TitleTCSystematic review totalNewSUMWork plan1Quantities and Units TC 1134171st Quarter2Applications of Statistical MethodsTC 1021015253Human Resource mgtTC 106215174Management and SystemTC 53712492nd Quarter5Hotel and Tourism ServicesTC 10315186Packaging and DistributionTC 6 59-597Te/cal Drawing, signs and SymbolsTC 91822403rd Quarter8Measurement and CalibrationTC 752521469Information TechnologyTC 88172510Financial ServicesTC 1073101311Home EquipmentTC 5383114th Quarter12School Materials& Stationary ItemsTC 43554013Packaging and DistributionTC 6 48-48Total269139408SECTOR: Basic and Generality NEW ISO 1st Quarter PROJECT ID:RESPONSIBLE(TC 1)RESPONSIBLE SECRETARIAT ESAICS : 01.040.01Project Title: Generalities. Terminology. Standardization. Documentation (Vocabularies)Total number of Standards:3S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 13715:2017Technical product documentation -- Edges of undefined shape -- Indication and dimensioning2ISO/IEC Guide 2:2004Standardization and related activities -- General vocabulary3ISO 1087-1:2000Terminology work -- Vocabulary -- Part 1: Theory and applicationNewSECTOR: Basic and Generality NEW ISO 1st Quarter PROJECT ID:RESPONSIBLE(TC 1)RESPONSIBLE SECRETARIAT ESAICS : 01.060Project Title: Quantities and UnitsTotal number of Standards:4S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 1151-2:1985Flight dynamics -- Concepts, quantities and symbols -- Part 2: Motions of the aircraft and the atmosphere relative to the Earth2ISO 1151-6:1982Terms and symbols for flight dynamics -- Part 6: Aircraft geometry3ISO 1151-7:1985Flight dynamics -- Concepts, quantities and symbols -- Part 7: Flight points and flight envelopes4ISO 1151-8:1992Flight dynamics -- Concepts, quantities and symbols -- Part 8: Concepts and quantities used in the study of the dynamic behaviour of the aircraftSECTOR: Basic and GeneralityNEW ISO 1st Quarter PROJECT ID:RESPONSIBLE(TC 106)RESPONSIBLE SECRETARIAT ESAICS : 03.100.30Project Title: Management of human resourcesTotal number of Standards:15S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 5496:2006ISO 5496:2006/Amd 1:2018Sensory analysis -- Methodology -- Initiation and training of assessors in the detection and recognition of odours2ISO/TS 11774:2011Non-destructive testing -- Performance-based qualification3ISO/TS 17969:2017Petroleum, petrochemical and natural gas industries -- Guidelines on competency management for well operations personnel4ISO 18436-2:2014Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 2: Vibration condition monitoring and diagnostics5ISO 18436-4:2014Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 4: Field lubricant analysis6ISO 18436-5:2012Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 5: Lubricant laboratory technician/analyst7ISO 18436-6:2014Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 6: Acoustic emission8ISO 18436-7:2014Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 7: Thermography9ISO 18436-8:2013Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 8: Ultrasound10ISO 18490:2015Non-destructive testing -- Evaluation of vision acuity of NDT personnel11ISO 18878:2013Mobile elevating work platforms -- Operator (driver) training12ISO/IEC 19479:2019Information technology for learning, education, and training -- Learner mobility achievement information (LMAI)13ISO/IEC 19780-1:2015Information technology -- Learning, education and training -- Collaborative technology -- Collaborative learning communication -- Part 1: Text-based communication14ISO/IEC 20006-1:2014Information technology for learning, education and training -- Information model for competency -- Part 1: Competency general framework and information model15ISO 30401:2018Knowledge management systems -- RequirementsSECTOR: Basic and GeneralityNEW ISO 2nd Quarter PROJECT ID:RESPONSIBLE(TC 5)RESPONSIBLE SECRETARIAT ESAICS : 03.080.01Project Title: Services in generalTotal number of Standards:4S.NOSTANDARD NOFULL DOCUMENT TITLE1IWA 27:2017Guiding principles and framework for the sharing economy2ISO/IEC Guide 76:2008Development of service standards -- Recommendations for addressing consumer issues3ISO 37500:2014Guidance on outsourcing4ES xxxx:2019Management system–Bus depot management system requirementsSECTOR: Basic and GeneralityNEW ISO 2nd Quarter PROJECT ID:RESPONSIBLE(TC 5)RESPONSIBLE SECRETARIAT ESAICS : 03.080.99Project Title: Other servicesTotal number of Standards:4S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 18587:2017Translation services -- Post-editing of machine translation output -- Requirements 2ISO 18841:2018Interpreting services -- General requirements and recommendations3ISO 20228:2019Interpreting services -- Legal interpreting – Requirements4ISO/IEC TR 22446:2017Information technology -- Continual performance improvement of IT enabled services5ISO 19600:2014Compliance management systems – Guidelines6ISO/TR 44000:2019Principles for successful collaborative business relationship management7ISO 56003:2019Innovation management -- Tools and methods for innovation partnership – Guidance8ISO/TR 56004:2019Innovation Management Assessment -- GuidanceSECTOR: Basic and GeneralityNEW ISO 2nd Quarter PROJECT ID:RESPONSIBLE(TC 10)RESPONSIBLE SECRETARIAT ESAICS : 03.200.01Project Title : Leisure and tourism in general?Total number of Standards:7S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 21401:2018Tourism and related services -- Sustainability management system for accommodation establishments – Requirements2ISO 21426:2018Tourism and related services -- Medical spas -- Service requirements3ISO 17680:2015Tourism and related services -- Thalassotherapy -- Service requirements4ISO/TS 13811:2015Tourism and related services -- Guidelines on developing environmental specifications for accommodation establishments5ISO 20410:2017Tourism and related services -- Bareboat charter -- Minimum service and equipment requirements6ISO 17679:2016Tourism and related services -- Wellness spa -- Service requirements7ISO 21401:2018Tourism and related services -- Sustainability management system for accommodation establishments -- RequirementsSECTOR: Basic and GeneralityNEW ISO 2nd Quarter PROJECT ID:RESPONSIBLE(TC 10)RESPONSIBLE SECRETARIAT ESAICS : 03.200.10?Project Title : Adventure tourismTotal number of Standards:3S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 20611:2018Adventure tourism -- Good practices for sustainability -- Requirements and recommendations2ISO 21103:2014Adventure tourism -- Information for participants3ISO/TR 21102:2013Adventure tourism -- Leaders -- Personnel competenceSECTOR: Basic and GeneralityNEW ISO 2nd Quarter PROJECT ID:RESPONSIBLE(TC 10)RESPONSIBLE SECRETARIAT ESAICS : 03.200.99?Project Title : Other standards relating to leisure and tourism?Total number of Standards:4S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 11107:2009Recreational diving services -- Requirements for training programmes on enriched air nitrox (EAN) diving2ISO 13293:2012Recreational diving services -- Requirements for gas blender training programmes3ISO 24801-1:2014Recreational diving services -- Requirements for the training of recreational scuba divers -- Part 1: Level 1 -- Supervised diver4ISO 24801-2:2014Recreational diving services -- Requirements for the training of recreational scuba divers -- Part 2: Level 2 -- Autonomous diver5ISO 11121:2017Recreational diving services -- Requirements for introductory programmes to scuba divingSECTOR: Basic and GeneralityNEW ISO 3rd Quarter PROJECT ID:RESPONSIBLE(TC 9)RESPONSIBLE SECRETARIAT ESAICS : 01.070Project Title: Colour codingTotal number of Standards:2S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 6217:1982Shipbuilding -- Inland navigation -- Pilot craft -- Identification painting and inscriptions2ISO 14726:2008Ships and marine technology -- Identification colours for the content of piping systemsSECTOR: Basic and GeneralityNEW ISO 3rd Quarter PROJECT ID:RESPONSIBLE(TC 9)RESPONSIBLE SECRETARIAT ESAICS : 01.080.20?Project Title: Graphical symbols for use on specific equipmentTotal number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 11532:2018Aircraft ground equipment -- Graphical symbolsSECTOR: Basic and GeneralityNEW ISO 3rd Quarter PROJECT ID:RESPONSIBLE(TC 9)RESPONSIBLE SECRETARIAT ESAICS : 01.080.50?Project Title: Graphical symbols for use on information technology and telecommunications technical drawings and in relevant technical product documentationTotal number of Standards:6S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 5807:1985Information processing -- Documentation symbols and conventions for data, program and system flowcharts, program network charts and system resources charts2ISO 8790:1987Information processing systems -- Computer system configuration diagram symbols and conventions3ISO/IEC 15416:2016Automatic identification and data capture techniques -- Bar code print quality test specification -- Linear symbols4ISO/IEC 15424:2008Information technology -- Automatic identification and data capture techniques -- Data Carrier Identifiers (including Symbology Identifiers)5ISO/IEC 16023:2000Information technology -- International symbology specification – MaxiCode6ISO/IEC 16022:2006ISO/IEC 16022:2006/Cor 1:2008, ISO/IEC 16022:2006/Cor 2:2011Information technology -- Automatic identification and data capture techniques -- Data Matrix bar code symbology specificationSECTOR: Basic and GeneralityNEW ISO 3rd Quarter PROJECT ID:RESPONSIBLE(TC 9)RESPONSIBLE SECRETARIAT ESAICS : 01.080.99?Project Title: Other graphical symbolsTotal number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 22742:2010Packaging -- Linear bar code and two-dimensional symbols for product packagingSECTOR: Basic and GeneralityNEW ISO 3rd Quarter PROJECT ID:RESPONSIBLE(TC 9)RESPONSIBLE SECRETARIAT ESAICS : 01.100.01?Project Title: Technical drawings in generalTotal number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 129-5:2018Technical product documentation -- Indication of dimensions and tolerances -- Part 5: Dimensioning of structural metal workSECTOR: Basic and GeneralityNEW ISO 3rd Quarter PROJECT ID:RESPONSIBLE(TC 9)RESPONSIBLE SECRETARIAT ESAICS : 01.100.20?Project Title: Mechanical engineering drawingsTotal number of Standards:9S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 2203:1973Technical drawings -- Conventional representation of gears2ISO 2553:2019Welding and allied processes -- Symbolic representation on drawings -- Welded joints3ISO 2692:2014Geometrical product specifications (GPS) -- Geometrical tolerancing -- Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)4ISO 3040:2016Geometrical product specifications (GPS) -- Dimensioning and tolerancing – Cones5ISO 7083:1983Technical drawings -- Symbols for geometrical tolerancing -- Proportions and dimensions6ISO 8826-1:1989Technical drawings -- Rolling bearings -- Part 1: General simplified representation7ISO 8826-2:1994Technical drawings -- Rolling bearings -- Part 2: Detailed simplified representation8ISO 9222-1:1989Technical drawings -- Seals for dynamic application -- Part 1: General simplified representation9ISO 9222-2:1989Technical drawings -- Seals for dynamic application -- Part 2: Detailed simplified representationSECTOR: Basic and GeneralityNEW ISO 3rd Quarter PROJECT ID:RESPONSIBLE(TC 9)RESPONSIBLE SECRETARIAT ESAICS : 01.100.30?Project Title: Construction drawings?Total number of Standards:2S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO/TR 16310:2014Symbol libraries for construction and facilities management2ISO 8560:2019Technical drawings -- Construction drawings -- Representation of modular sizes, lines and grids SECTOR: Basic and GeneralityNEW ISO 3rd Quarter PROJECT ID:RESPONSIBLE(TC 75)RESPONSIBLE SECRETARIAT ESAICS : 17.120.10Project Title: Flow in closed conduits?Total number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 4006:1991Measurement of fluid flow in closed conduits -- Vocabulary and symbolsSECTOR: Basic and GeneralityNEW ISO 3rd Quarter PROJECT ID:RESPONSIBLE(TC 75)RESPONSIBLE SECRETARIAT ESAICS : 01.040.17Project Title: Metrology and measurement. Physical phenomena (Vocabularies)Total number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 8062-1:2007Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 1: VocabularySECTOR: Basic and GeneralityNEW ISO 3rd Quarter PROJECT ID:RESPONSIBLE(TC 75)RESPONSIBLE SECRETARIAT ESAICS : 17.040.20Project Title: Noise emitted by machines and equipmentTotal number of Standards:2S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 8785:1998Geometrical Product Specification (GPS) -- Surface imperfections -- Terms, definitions and parameters2ISO 12180-1:2011Geometrical product specifications (GPS) -- Cylindricity -- Part 1: Vocabulary and parameters of cylindrical formSECTOR: Basic and GeneralityNEW ISO 3rd Quarter PROJECT ID:RESPONSIBLE(TC 75)RESPONSIBLE SECRETARIAT ESAICS : 17.180.30Project Title: Optical measuring instrumentsTotal number of Standards:2S.NOSTANDARD NOFULL DOCUMENT TITLE1 ISO 9849:2017Optics and optical instruments -- Geodetic and surveying instruments – Vocabulary2ISO 10360-1:2000ISO 10360-1:2000/Cor 1:2002Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 1: VocabularySECTOR: Basic and GeneralityNEW ISO 3rd Quarter PROJECT ID:RESPONSIBLE(TC 75)RESPONSIBLE SECRETARIAT ESAICS : 17.020Project Title: Metrology and measurement in general?Total number of Standards:2S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 21748:2017Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation2ISO/TS 28038:2018Determination and use of polynomial calibration functionsSECTOR: Basic and GeneralityNEW ISO 3rd Quarter PROJECT ID:RESPONSIBLE(TC 75)RESPONSIBLE SECRETARIAT ESAICS : 17.040.10?Project Title: Limits and fitsTotal number of Standards:11S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 21748:2017Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation2ISO/TS 28038:2018Determination and use of polynomial calibration functions3ISO 14405-1:2016Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes4ISO 14405-2:2018Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 2: Dimensions other than linear or angular sizes5ISO 14253-2:2011 ISO 14253-2:2011/Cor 1:2013,Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification6ISO 14253-3:2011Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 3: Guidelines for achieving agreements on measurement uncertainty statements7ISO/TR 14253-6:2012Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces8ISO 17450-3:2016Geometrical product specifications (GPS) -- General concepts -- Part 3: Toleranced features9ISO 18391:2016Geometrical product specifications (GPS) -- Population specification10ISO 20170:2019Geometrical product specifications (GPS) -- Decomposition of geometrical characteristics for manufacturing control11ISO/TS 21619:2018Geometrical product specifications (GPS) -- Types of documents with GPSSECTOR: Basic and GeneralityNEW ISO 3rd Quarter PROJECT ID:RESPONSIBLE(TC 75)RESPONSIBLE SECRETARIAT ESAICS : 17.080?Project Title: Measurement of time, velocity, acceleration, angular velocity?Total number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 17713-1:2007Meteorology -- Wind measurements -- Part 1: Wind tunnel test methods for rotating anemometer performanceSECTOR: Basic and GeneralityNEW ISO 3rd Quarter PROJECT ID:RESPONSIBLE(TC 75)RESPONSIBLE SECRETARIAT ESAICS : 17.120.20?Project Title: Flow in open channels?Total number of Standards:2S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 748:2007Hydrometry -- Measurement of liquid flow in open channels using current-meters or floats2ISO 1070:2018Hydrometry -- Slope-area methodSECTOR: Basic and GeneralityNEW ISO 3rd Quarter PROJECT ID:RESPONSIBLE(TC 8)RESPONSIBLE SECRETARIAT ESAICS : 01.040.35Project Title: Information technology (Vocabularies)Total number of Standards:15S.NOSTANDARD NOFULL DOCUMENT TITLE1IEC 824:1988Terminology related to microprocessors2ISO/IEC TR 12382:1992Permuted index of the vocabulary of information technology3ISO/IEC TR 15044:2000Information technology -- Terminology for the Home Electronic System (HES)4ISO/IEC 2382:2015Information technology – Vocabulary5ISO/IEC 19762:2016Information technology -- Automatic identification and data capture (AIDC) techniques -- Harmonized vocabulary6ISO/IEC 20546:2019Information technology -- Big data -- Overview and vocabulary7ISO/IEC TR 29108:2013Information technology -- Terminology for intelligent homes8ISO/IEC 27000:2018Information technology -- Security techniques -- Information security management systems -- Overview and vocabulary9ISO/IEC/IEEE 24765:2017Systems and software engineering – Vocabulary10ISO/IEC 20924:2018Information technology -- Internet of Things (IoT) – Vocabulary11ISO/IEC 17788:2014Information technology -- Cloud computing -- Overview and vocabulary12ISO/TR 17465-1:2014Intelligent transport systems -- Cooperative ITS -- Part 1: Terms and definitions13ISO 17115:2007Health informatics -- Vocabulary of compositional terminological systems14ISO/TR 16056-1:2004Health informatics -- Interoperability of telehealth systems and networks -- Part 1: Introduction and definitions15ISO/IEC 16509:1999Information technology -- Year 2000 terminologySECTOR: Basic and GeneralityNEW ISO 3rd Quarter PROJECT ID:RESPONSIBLE(TC 107)RESPONSIBLE SECRETARIAT ESAICS: 03.060Project Title: Finances, Banking, Monetary systems InsuranceTotal number of Standards:10S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 20022-1:2013Financial services -- Universal financial industry message scheme -- Part 1: Metamodel2ISO 20022-2:2013Financial services -- Universal financial industry message scheme -- Part 2: UML profile3ISO 20022-3:2013Financial services -- Universal financial industry message scheme -- Part 3: Modelling4ISO 20022-4:2013?Financial services -- Universal financial industry message scheme -- Part 4: XML Schema generation5ISO 20022-5:2013Financial services -- Universal financial industry message scheme -- Part 5: Reverse engineering6ISO 20022-7:2013Financial services -- Universal financial industry message scheme -- Part 7: Registration7ISO 20022-8:2013Financial services -- Universal financial industry message scheme -- Part 8: ASN.1 generation8ISO 6166:2013Securities and related financial instruments -- International securities identification numbering system (ISIN)9ISO 8532:1995Securities -- Format for transmission of certificate numbers10ISO 9019:1995Securities -- Numbering of certificatesSECTOR: Basic and GeneralityNEW ISO 4th Quarter PROJECT ID:RESPONSIBLE(TC 53)RESPONSIBLE SECRETARIAT ESAICS : 01.040.97Project Title: Domestic and commercial equipment. Entertainment. Sports (Vocabularies)Total number of Standards:3S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 7152:1997ISO 7152:1997/Amd 1:2006Camping tents and caravan awnings -- Vocabulary and list of equivalent terms2ISO/TR 21276:2018Clean cook stoves and clean cooking solutions – Vocabulary3ISO 23953-1:2015Refrigerated display cabinets -- Part 1: VocabularySECTOR: Basic and GeneralityNEW ISO 4th Quarter PROJECT ID:RESPONSIBLE(TC 4)RESPONSIBLE SECRETARIAT ESAICS : 01.100.40Project Title: Drawing equipmentTotal number of Standards:5S.NOSTANDARD NOFULL DOCUMENT TITLE1ISO 9957-1:1992Fluid draughting media -- Part 1: Water-based India ink -- Requirements and test conditions2ISO 9957-2:1995Fluid draughting media -- Part 2: Water-based non-India ink -- Requirements and test conditions3ISO 9957-3:1997Fluid draughting media -- Part 3: Water-based coloured draughting inks -- Requirements and test conditions4ISO 9958-1:1992Draughting media for technical drawings -- Draughting film with polyester base -- Part 1: Requirements and marking5ISO 9958-2:1992Draughting media for technical drawings -- Draughting film with polyester base -- Part 2: Determination of properties SYSTEMATIC REVIEWSECTOR: Basic and Generality REVIEW 1st QuarterPROJECT ID:RESPONSIBLE(TC 1)RESPONSIBLE SECRETARIAT ESAICS : 01.020Project Title : Terminology (principles and coordination)?Total number of Standards:2S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 860:2015Terminology work — Harmonization of concepts and terms2ES ISO 704:2015Terminology work — Principles and methodsSECTOR: Basic and Generality REVIEW 1st QuarterPROJECT ID:RESPONSIBLE(TC 1)RESPONSIBLE SECRETARIAT ESAICS : 01.060Project Title : Quantities and unitsTotal number of Standards:11S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 1151-1:2015Flight dynamics - Concepts, quantities and Symbols - Part 1: Aircraft motion relative to the air2ES ISO 1151-3:2015Flight dynamics - Concepts, quantities and Symbols - Part 3 : Derivatives of forces, moments. and their coefficients3ES ISO 1151-4:2015Flight dynamics - Concepts, quantities and Symbols - Part 4: Concepts, quantities and Symbols used in the study of aircraft stability and control4ES ISO 1151-5:2015Flight dynamics - Concepts, quantities and Symbols - Part 5: Quantities used in measurements5ES ISO 1151-9:2015Flight dynamics - Concepts, quantities and Symbols - Part 9: Models of atmospheric motions along the trajectory of the aircraft6ES ISO 9346:2014Hydrothermal performance of buildings and building materials — Physical quantities for mass transfer — Vocabulary7ES IEC 80000-13:2015Quantities and units Part 13: Information science and technology8ES ISO 80000-12:2015Quantities and units—Part 12:Solid state physics9ES ISO 80000-14:2015Telebiometrics related to human physiology10ES ISO 9288:2002(R 2014)Thermal insulation - Heat transfer by radiation - Physical quantities and definitions11ES ISO 7345:2002(R 2014)Thermal insulation-physical quantities and definitionsSECTOR: Basic and Generality REVIEW 1st QuarterPROJECT ID:RESPONSIBLE(TC 102)RESPONSIBLE SECRETARIAT ESAICS : 03.120.30Project Title : Application of statistical methodsTotal number of Standards:10S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 11843-3: 2015Capability of detection — Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used2ES ISO 11843-4: 2015Capability of detection — Part 4: Methodology for comparing the minimum detectable value with a given value3ES ISO 7873: 2004Control charts for arithmetic average with warning limits4ES ISO 7870-2: 2015Control charts —Part2: Shewhart control charts5ES ISO 2859-10: 2012Sampling procedures for inspection by attributes — Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes6ES ISO 8422: 2004Sequential sampling plans for inspection by attributes7ES ISO 8258: 2004Shewhart control charts8ES ISO 11648-2: 2015Statistical aspects of sampling from bulk materials—Part 2:Sampling of particulate materials9ES ISO 11095:2014Linear calibration using reference materials10ES ISO 13448-1: 2015Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 1: Guidelines for the APP approachSECTOR: Basic and Generality REVIEW 1st QuarterPROJECT ID:RESPONSIBLE(TC 106)RESPONSIBLE SECRETARIAT ESAICS : 03.100.30Project Title : Management of human resources?Total number of Standards:2S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 18436-3:2015Condition monitoring and diagnostics of machines?—?Requirements?for?qualification?and assessment of personnel —Part 3: Requirements for training bodies and the training process2ES ISO 18436-1:2015Condition monitoring and diagnostics of machines?—?Requirements?for?qualification?and assessment of personnel —Part 1: Requirements for assessment bodies and the assessment processSECTOR: Basic and Generality REVIEW 2nd QuarterPROJECT ID:RESPONSIBLE(TC 5)RESPONSIBLE SECRETARIAT ESAICS : 03.100.01Project Title : Company organization and management in general?Total number of Standards:6S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 25639-2:2014Exhibitions, shows, fairs and conventions — Part 2: Measurement procedures for statistical purposes2ES ISO 55001:2015Asset management — Management systems — Requirements3ES ISO 22301:2015Societal security — Business continuity management systems — Requirements4ES ISO 22320:2015Societal security — Emergency management — Requirements for incident response5ES ISO 22312:2013Societal security — Technological capabilities6ES ISO/ IEC 17021-6: 2015Conformity assessment — Requirements for bodies providing audit and certification of management systems Part 6-Competence requirements for auditing and certification of business continuity management systemsSECTOR: Basic and Generality REVIEW 2nd QuarterPROJECT ID:RESPONSIBLE(TC 5)RESPONSIBLE SECRETARIAT ESAICS : 01.040.03Project Title: Services. Company organization, management and quality. Administration. Transport. Sociology. (Vocabularies)Total number of Standards:4S.NOSTANDARD NOFULL DOCUMENT TITLE1ES CHS 189:2015Conformity assessment — Vocabulary and general principles2ES ISO 55000:2015Asset management — Overview, principles and terminology3ES ISO GUIDE 73:2013Risk management — Vocabulary4ES ISO 22300:2014societal security — TerminologySECTOR: Basic and Generality REVIEW 2nd QuarterPROJECT ID:RESPONSIBLE(TC 5)RESPONSIBLE SECRETARIAT ESAICS : 03.080.99Project Title: Other servicesTotal number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ES IEC/ISO 20000-4:2013Information technology -- Service management -- Part 4: Process reference modelSECTOR: Basic and Generality REVIEW 2nd QuarterPROJECT ID:RESPONSIBLE(TC 5)RESPONSIBLE SECRETARIAT ESAICS : 03.100.70Project Title: Management systems?Total number of Standards:8S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 20121:2015Event sustainability management systems — Requirements with guidance for use2ES ISO 22313:2013Societal security — Business continuity management systems — Guidance3ES CHS 178:2015Environmental management systems — General guidelines on principles, systems and support techniques4ES ISO 10017:2013Guidance on statistical techniques for ISO 9001:20005ES CHS 175:2015Measurement management systems — Requirements for measurement processes and measuring equipment6ES CHS 173:2015Quality management systems — Guidelines for quality management in projects7ES ISO 22006:2012Quality management systems — Guidelines for the application of ISO 9001:2008 to crop production8ES ISO/ IEC 17021-7: 2015Conformity assessment — Requirements for bodies providing audit and certification of management systems —Competence requirements for auditing and certification of road traffic safety management systemsSECTOR: Basic and Generality REVIEW 2nd QuarterPROJECT ID:RESPONSIBLE(TC 5)RESPONSIBLE SECRETARIAT ESAICS : 03.120.20Project Title: Product and company certification. Conformity assessment?Total number of Standards:12S.NOSTANDARD NOFULL DOCUMENT TITLE1ES CHS 187:2015Guidelines for auditing management systems2ES CHS 135: 2015Conformity assessment — Code of good practice3ES CHS 118: 2015Conformity assessment — Confidentiality — Principles and requirements4ES CHS 131: 2015Conformity assessment — Example of a certification scheme for tangible products5ES CHS 138: 2015Conformity assessment — Fundamentals of product certification and guidelines for product certification schemes6ES ISO/ IEC 17022: 2015Conformity assessment -- Requirements and recommendations for content of a third-party audit report on management systems7ES CHS 137: 2015Conformity assessment — Requirements for bodies certifying products, processes and services8ES CHS 192: 2015Conformity assessment — Requirements for bodies providing audit and certification of management systems9ES ISO/IEC 17021-5: 2015Conformity assessment — Requirements for bodies providing audit and certification of management systems Part 5-Competence requirements for auditing and certification of asset management systems10ES CHS 191: 2015Conformity assessment — Requirements for the operation of various types of bodies performing inspection11ES ISO GUIDE 27: 2015Guidelines for corrective actions to be taken by a certification body in the event of misuse of its mark of conformity12ES CHS 149: 2015Methods of indicating conformity withs standards for third party certification systemsSECTOR: Basic and Generality REVIEW 2nd QuarterPROJECT ID:RESPONSIBLE(TC 5)RESPONSIBLE SECRETARIAT ESAICS : 03.120.10Project Title: Quality management and quality assuranceTotal number of Standards:6S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 15161:2012Guidelines on the application of ISO 9001:2000 for the food and drink industry2ES ISO 9000:2015Quality management systems — Fundamentals and vocabulary3ES 3755:2012Quality management systems – Guidelines for the application of ISO 9001 in education4ES ISO 16949:2012Quality management systems — Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations 5ES ISO 9001:2015Quality management systems — Requirements6ES CHS 174:2015Quality management systems — Guidelines for configuration managementSECTOR: Basic and Generality REVIEW 2nd QuarterPROJECT ID:RESPONSIBLE(TC 10)RESPONSIBLE SECRETARIAT ESAICS : 01.040.03Project Title: Services. Company organization, management and quality. Administration. Transport. Sociology. (Vocabularies)Total number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 18513:2013Tourism services — Hotels and other types of tourism accommodation — TerminologySECTOR: Basic and Generality REVIEW 2nd QuarterPROJECT ID:RESPONSIBLE(TC 10)RESPONSIBLE SECRETARIAT ESAICS : 03.080.30Project Title: Services for consumers?Total number of Standards:2S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 14785:2014Tourist information office and reception services requirements2ES 3808-1:2014Hotels – Rating requirement and classification SECTOR: Basic and Generality REVIEW 2nd QuarterPROJECT ID:RESPONSIBLE(TC 6)RESPONSIBLE SECRETARIAT ESAICS : 55.180.10Project Title: General purpose containersTotal number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 830:2001Freight containers-VocabularySECTOR: Basic and Generality REVIEW 2nd QuarterPROJECT ID:RESPONSIBLE(TC 6)RESPONSIBLE SECRETARIAT ESAICS : 55.020Project Title: General purpose containersTotal number of Standards:11S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 780: 2001(R 2014)Packaging — Pictorial marking for handling goods2ES OIML 45: 2001(R 2013)Casks and Barrels3ES 961: 2003(R 2013)Glossary of packing terms4ES ISO 13127: 2015Packaging — Child resistant packaging — Mechanical test methods for re closable child resistant packaging systems5ES ISO 13274: 2015Packaging — Transport packaging for dangerous goods — Plastics compatibility testing for packaging and IBCs6ES ISO 18605: 2015Packaging and the environment — Energy recovery7ES ISO 18604: 2015Packaging and the environment — Material recycling8ES ISO 18606: 2015Packaging and the environment — Organic recycling9ES 962: 2003(R 2013)Portable insulated domestic food containers- specification10ES OIML 79: 2001(R 2013)Labeling requirements for prepackaged products11ES 682: 2009(R 2013)Net content in prepackaged productsSECTOR: Basic and Generality REVIEW 2nd QuarterPROJECT ID:RESPONSIBLE(TC 6)RESPONSIBLE SECRETARIAT ESAICS : 55.080Project Title: Sacks. BagsTotal number of Standards:15S.NOSTANDARD NOFULL DOCUMENT TITLE1ES 408: 2008Fertilizer packaging-Materials low density polyethylene film liner-Specification2ES 407: 2008Fertilizer packaging-Materials-High density polyethylene woven bags- Specifications3ES 409: 2008Fertilizer packing materials-Woven poly propylene - Determination of UV stability4ES 406: 2008Fertilizer packing materials-Woven poly propylene bags- Specifications5ES ISO 15867: 2015Intermediate bulk containers (IBCs) for non-dangerous goods -- Terminology6ES 921: 2006(R 2013)Open – mouth sacks and hessian type manufactured from woven polyolefin tape yarn-Specification7ES ISO 8367-1: 2001(R 2013)Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks8ES ISO 8367-2: 2001(R 2013)Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film9ES ISO 8351-1: 2001Packaging - Method of Specification for Sacks - Part 1: Paper Sacks10ES ISO 8351-2: 2001Packaging - Method of Specification for Sacks - Part 2: Sacks Made from Thermoplastic Flexible Film11ES ISO 6599-1: 2015Packaging - Sacks - Conditioning for testing - Part 1 : Paper Sacks12ES ISO 6591-2: 2001Packaging - Sacks -Description and Method of Measurement - Part 2:Empty Sacks Made From Thermoplastic flexible Film13ES ISO 7023: 2008Packaging - Sacks -Method of Sampling Empty Sacks for Testing14ES ISO 6590-1: 2001(R 2013)Packaging -- Sacks -- Vocabulary and types -- Part 1: Paper sacks15ES ISO 6590-2: 2001(R 2013)Packaging -Sacks-Vocabulary and types-Part 2 Sacks made from thermoplastic flexible filmSECTOR: Basic and Generality REVIEW 2nd QuarterPROJECT ID:RESPONSIBLE(TC 6)RESPONSIBLE SECRETARIAT ESAICS : 55.100Project Title: Bottles, Pots, JarsTotal number of Standards:32S.NOSTANDARD NOFULL DOCUMENT TITLE1ES 110:2001Carbonated beverages glass bottles-General requirements2ES 116:2001Glass - grading glass for alkalinity(Take the std from documentation)3ES 109:2001Glass-Terminology4ES 839:2002Glass beer bottles – general requirements(Take the std from documentation)5ES 115:2001(R 2013)Glass bottles-Hydrostatic pressure test6ES 117:2001Glass bottles - sampling(Take the std from documentation)7ES 113:2001Glass bottles - vertically test(Take the std from documentation)8ES ISO 8106:2013Glass containers — Determination of capacity by gravimetric method —Test method9ES ISO 9009:2013Glass containers - Height and non-parallelism of finish with reference to container base - Test methods10ES ISO 8113:2013Glass containers —Resistance to vertical load —Test method11ES ISO 9058:2013Glass containers— Standard tolerances for bottles12ES ISO 7459:2013Glass containers — Thermal shock resistance and thermal shock endurance — Test methods13ES ISO 9100-1:2012Glass containers — Vacuum lug finishes — Part 1: General14ES ISO 9100-2:2013Glass containers — Vacuum lug finishes — Part 2: 33 medium15ES ISO 9100-3:2012Glass containers — Vacuum lug finishes — Part 3: 38 regular16ES ISO 9100-4:2013Glass containers — Vacuum lug finishes — Part 4: 38 medium17ES ISO 9100-5:2013Glass containers — Vacuum lug finishes — Part 5: 43 and 48 regular18ES ISO 9100-6:2013Glass containers — Vacuum lug finishes — Part 6: 53 and 58 regular19ES ISO 9100-8:2013Glass containers — Vacuum lug finishes — Part 8: 63, 66 and 70 regular20ES ISO 9100-9:2013Glass containers — Vacuum lug finishes — Part 9: 63, 66 and 70 deep21ES ISO 9100-11:2013Glass containers — Vacuum lug finishes — Part 11: 82 regular22ES ISO 9100-12:2013Glass containers — Vacuum lug finishes — Part 12: 89 regular23ES ISO 9100-13:2013Glass containers — Vacuum lug finishes — Part 13: 100 regular24ES ISO 9100-14:2013Glass containers — Vacuum lug finishes — Part 14: 110 regular25ES ISO 9057:2013Glass containers - 28 mm tamper-evident finish for pressurized liquids - Dimensions26ES ISO 7458:2013Glass containers — Internal pressure resistance — Test methods27ES ISO 8164:2002Glass containers - 520 ml Euro-form bottles - Dimensions28ES ISO 8163:2002Glass containers-shallow crown finishes-dimensions29ES ISO 12818:2015Glass packaging — standard tolerances for flacon age(Take the std from documentation)30ES 114:2001Glass ware - thermal shock test(Take the std from documentation)31ES 965:2003Specification for plastic portable water bottles32ES ISO 9885:2015Wide-mouth glass containers - Deviation from flatness of top sealing surface - Test methodsSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 9)RESPONSIBLE SECRETARIAT ESAICS : 01.080.99Project Title: Other graphical symbolsTotal number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 1951:2015Presentation/representation of entries in dictionaries — Requirements, recommendations and informationSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 9)RESPONSIBLE SECRETARIAT ESAICS : 01.120Project Title: Standardization. General rules?Total number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 10241-1:2015Terminological entries in standards — Part 1: General requirements and examples of presentationSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 9)RESPONSIBLE SECRETARIAT ESAICS : 01.040.01Project Title: Generalities. Terminology. Standardization. Documentation (Vocabularies)Total number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 10209-4:2005Technical product documentation —Vocabulary — Part 4:Terms relating to construction documentationSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 9)RESPONSIBLE SECRETARIAT ESAICS : 01.080.10Project Title: Public information symbols. Signs. Plates. Labels?Total number of Standards:5S.NOSTANDARD NOFULL DOCUMENT TITLE1ES 1489:2005Fire safety signs, notices and graphic symbols. Specification for self-luminous fire safety signs2ES ISO 17398:2015Safety colours and safety signs — Classification, performance and durability of safety signs3ES ISO 20712-1:2015Water safety signs and beach safety flags — Part 1: Specifications for water safety signs used in work places and public areas4ES ISO 20712-2:2015Water safety signs and beach safety flags — Part 2: Specifications for beach safety flags — Colour, shape, meaning and performance5ES ISO 20712-3:2015Water safety signs and beach safety flags—Part 3: Guidance for useSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 9)RESPONSIBLE SECRETARIAT ESAICS : 01.080.20Project Title: Graphical symbols for use on specific equipmentTotal number of Standards:7S.NOSTANDARD NOFULL DOCUMENT TITLE1ES IEC 80416-3: 2015Basic principles for graphical symbols for use on equipment –Part 3: Guidelines for the application of graphical symbols2ES ISO 13200: 2015Cranes - Safety signs and hazard pictorials - General principles3ES ISO 6405-1: 2015Earth-moving machinery — Symbols for operator controls and other displays — Part 1: Common symbols4ES ISO 7286: 2006(R 2014)Graphical Symbols for resistance welding equipment5ES ISO 7287: 2006Graphical symbols for thermal cutting equipment6ES ISO 369: 2015Machine tools — Symbols for indications appearing on machine tools7ES ISO 15847: 2015Graphic technology — Graphical symbols for printing press systems and finishing systems, including related auxiliary equipmentSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 9)RESPONSIBLE SECRETARIAT ESAICS : 01.110Project Title: Technical product documentation?Total number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ES IEC 81714-3:2015Design of graphical symbols for use in the technical documentation of products — Part 3: Classification of connect nodes, networks and their encodingSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 9)RESPONSIBLE SECRETARIAT ESAICS : 01.080.30Project Title: Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentationTotal number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 6790:2002Equipment for fire protection & fire fighting - graphical symbols for fire protection plans – specification(Take the std from documentation)SECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 9)RESPONSIBLE SECRETARIAT ESAICS : 01.080.99Project Title: Other graphical symbolsTotal number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ES 1299:2005Specification for design, construction and installation of signsSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 75)RESPONSIBLE SECRETARIAT ESAICS : 17.060Project Title: Measurement of volume, mass, density, viscosity?Total number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ES 524:2000Capacity measures-Edible liquid measuresSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 75)RESPONSIBLE SECRETARIAT ESAICS : 17.040.40Project Title: Geometrical Product Specification (GPS)Total number of Standards:9S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 17863: 2014Geometrical product specification (GPS) — Geometrical tolerancing of moveable assemblies2ES ISO 22432: 2014Geometrical product specifications (GPS) — Features utilized in specification and verification3ES ISO 25378: 2014Geometrical product specifications (GPS)— Characteristics and conditions — Definitions4ES ISO 14406: 2014Geometrical product specifications (GPS) — Extraction5ES ISO 17450-1: 2014Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification6ES ISO 14253-2: 2014Geometrical product specifications (GPS) - Inspection by measurement of work pieces and measuring equipment - part 2guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification(Take the std from documentation)7ES ISO 14253-3: 2014Geometrical product specifications (GPS) - Inspection by measurement of work pieces and measuring equipment - part 3 guidelines for achieving agreements on measurement uncertainty statements(Take the std from documentation)8ES ISO 14253-6: 2014Geometrical product specifications (GPS) - Inspection by measurement of work pieces and measuring equipment - part 6 generalized decision rules for the acceptance and rejection of instruments and work pieces(Take the std from documentation)9ES ISO 17450-2: 2014Geometrical product specifications(GPS)—General concepts —Part 2: Basic tenets, specifications, operators, uncertainties and ambiguitiesSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 75)RESPONSIBLE SECRETARIAT ESAICS : 17.040.01Project Title: Linear and angular measurements in generalTotal number of Standards:3S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 2538: 2014Geometrical Product Specifications (GPS) — Series of angles and slopes on prisms2ES ISO 1: 2014Geometrical Product Specifications (GPS) — Standard reference temperature for geometrical product specification and verification3ES ISO 16015: 2014Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influencesSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 75)RESPONSIBLE SECRETARIAT ESAICS: 17.040.20Project Title: Properties of surfacesTotal number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 1302: 2014Geometrical Product Specifications (GPS) -- Indication of surface texture in technical product documentationSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 75)RESPONSIBLE SECRETARIAT ESAICS : 17.060Project Title: Measurement of volume, mass, density, viscosityTotal number of Standards:6S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 15212-1: 2005(R 2013)Oscillation-type density meters Part 1: Laboratory instruments2ES ISO 15212-2: 2005(R 2013)Oscillation-type density meters—Part2:Process instruments for homogeneous liquids3ES 1451:2005Noise and vibration control on construction and open sites- Guide to noise and vibration control legislation for construction and demolition including road construction and maintenance4ES ISO 8608:2015Mechanical vibration- road surface profiles - Reporting of measured data5ES ISO 14837-1:2015Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 1 general guidance6ES ISO 2017-2:2015Mechanical vibration and shock — Resilient mounting systems — Part 2 technical information to be exchanged for the application of vibration isolation associated with railway systemsSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 75)RESPONSIBLE SECRETARIAT ESAICS: 17.200.20Project Title: Temperature-measuring instruments?Total number of Standards:2S.NOSTANDARD NOFULL DOCUMENT TITLE1ES 1051:2004(R 2013)Secondary reference thermometers - specification2ES ISO/IEC 61066:2002Thermo luminescence dosimeter systems for personal and environmental monitoringSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 75)RESPONSIBLE SECRETARIAT ESAICS : 17.120.10Project Title: Flow in closed conduits?Total number of Standards:3S.NOSTANDARD NOFULL DOCUMENT TITLE1ES 2711: 2005Measurement of flow of cold potable water in closed conduits. Specification for single mechanical type meters It is replaced by BS EN 14154-1:20052ES 2710:2005Measurement of flow of cold potable water in closed conduits. Methods for determining principal characteristics of single mechanical water meters (including test equipment) It is replaced by BS EN 14154-3:20053ES 2709:2005Secondary reference thermometers - specification It is replaced by BS EN 14154-3:2005SECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 8)RESPONSIBLE SECRETARIAT ESAICS : 35.180Project Title: IT terminal and other peripheral equipmentTotal number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ES 3449:2008Ethiopic Keyboard Layout SECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 8)RESPONSIBLE SECRETARIAT ESAICS : 35.040.10Project Title: Coding of character setsTotal number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ES /ISO IEC 10646:2011Information technology — Universal Multiple-Octet Coded Character Set (UCS) — Part 1: Architecture and Basic Multilingual Plane AMENDMENT 1: Mathematical symbols and other charactersSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 8)RESPONSIBLE SECRETARIAT ESAICS : 35.240.15Project Title: Identification cards. Chip cards. BiometricsTotal number of Standards:3S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 8583-1:2015Financial transaction card originated messages — Interchange message specifications — Part 1: Messages, data elements and code values2ES ISO 8583-2:2015Financial transaction card originated messages — Interchange message specifications —Part 2:Application and registration Procedure for Institution Identification Codes (IIC)3ES ISO 8583-3:2015Financial transaction card originated messages — Interchange message specifications — Part 3: Maintenance procedures for messages, data elements and code valuesSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 8)RESPONSIBLE SECRETARIAT ESAICS : 35.240.70Project Title: IT applications in scienceTotal number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 19144-1: 2011Geographic information — Classification systems — Part 1 classification system structureSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 8)RESPONSIBLE SECRETARIAT ESAICS : 01.140.30Project Title: Documents in administration, commerce and industryTotal number of Standards:2S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 3166-1:2015Codes for the representation of names of countries and their subdivisions — Part 1: Country code2ES ISO 8601:2015Data elements and interchange formats — Information interchange —Representation of dates and timesSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC107)RESPONSIBLE SECRETARIAT ESAICS : 35.240.40Project Title: IT applications in bankingTotal number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 14742:2012Financial services — Recommendations on cryptographic algorithms and their useSECTOR: Basic and Generality REVIEW 3rd QuarterPROJECT ID:RESPONSIBLE(TC 107)RESPONSIBLE SECRETARIAT ESAICS : 03.060Project Title: ?Finances. Banking. Monetary systems. InsuranceTotal number of Standards:2S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 20022-6:2012Financial services -- Universal financial industry message scheme -- Part 6: Message transport characteristics2ES ISO 9362:2015Banking-Banking telecommunication messages — Business identifier code (BIC)SECTOR: Basic and Generality REVIEW 4th QuarterPROJECT ID:RESPONSIBLE(TC 53)RESPONSIBLE SECRETARIAT ESAICS : 97.040Project Title: Kitchen equipmentTotal number of Standards:8S.NOSTANDARD NOFULL DOCUMENT TITLE1ES 3737-3:2012Aluminum compartmental trays2ES 3737-2:2012Electric food –mixers3 ES 3737-5:2012Electric frying pans and deep fryers4ES 3737-8:2012Meat choppers5 ES 3737-1:2012Pressure Cooker6ES 3737-7:2012Stainless steel compartmental trays7 ES 3737-4:2012Stainless Steel cooking utensils8ES 3737-6:2012Stainless steel table utensilsSECTOR: Basic and Generality REVIEW 4th QuarterPROJECT ID:RESPONSIBLE(TC 4)RESPONSIBLE SECRETARIAT ESAICS : 97.040Project Title: FurnitureTotal number of Standards:6S.NOSTANDARD NOFULL DOCUMENT TITLE1 ES 3734-41: 2012Office bookcase, wood2 ES 3734-44: 2012Portable aluminum ledder(Take the std from Documentation)3 ES 1119: 2005School exercise books and papers – specification(Take the std from Documentation)4ES 1121: 2005White Chalks - Specification5ES ISO 1120: 2005(R 2012)Wood - Cased black lead and coloured pencils - Specification6ES 1122: 2005Writing equipment - Coloured Chalks and Pastels - SpecificationSECTOR: Basic and Generality REVIEW 4th QuarterPROJECT ID:RESPONSIBLE(TC 4)RESPONSIBLE SECRETARIAT ESAICS : 97.180Project Title: Miscellaneous domestic and commercial equipment?Total number of Standards:8S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 11540:2005Caps for Writing and Marking instruments intended for use by children up to 14 years of age – safety requirements2ES ISO 9177-1:2005(R 2012)Mechanical pencils Part 1: Classification, dimensions, performance requirements and testing3ES ISO 9177-2:2005(R 2012)Mechanical pencils Part 2: Black leads- Classification and dimensions4ES ISO 9177-3:2005(R 2012)Mechanical pencils Part 3: Black leads- Bending strengths of HB leads5ES ISO 14145-1: 2005(R 2012)Roller ball pens and refills -- Part 1: General use6ES ISO 14145-2: 2005(R 2012)Roller ball pens and refills -- Part 2: Documentary use (DOC)7ES ISO 12757-1: 2005(2014)Ballpoint pens and refills Part 1: General use8ES ISO 12757-2: 2005(2012)Ball point pens and refills -- Part 2: Documentary use (DOC)SECTOR: Basic and Generality REVIEW 4th QuarterPROJECT ID:RESPONSIBLE(TC 4)RESPONSIBLE SECRETARIAT ESAICS : 85.080.10Project Title: Office paperTotal number of Standards:21S.NOSTANDARD NOFULL DOCUMENT TITLE1ES 3735-7:2012Toners for printers, fax machines and photocopiers2ES 3735-15:2012Writing and printing paper3ES 3735-16:2012Fanfold Stationery4ES 3735-17:2012Facsimile paper5ES 3735-18:2012Duplicator paper6ES 3735-19:2012Coloured paper7ES 3735-20:2012Tracing paper8ES 3735-21:2012Graph Paper9ES 3735-23:2012Roll paper for adding machine10ES 3735-24:2012Paper for handwriting11ES 3735-25:2012Square Paper12ES 3735-27:2012Paper board for packaging13ES 3735-41:2012Self adhesive note pad14ES 3735-45:2012Paper Towel15ES 3735-47:2012Paper cover for document16ES 3735-59:2012Diary17ES 3735-60:2012Note Pad18ES 3735-67:2012Type Eraser19ES 3739-69:2012Envelope20ES 3735-75:2012Document register21ES 3735-76:2012Briefcase, Plastic Moulded SECTOR: Basic and Generality REVIEW 4th QuarterPROJECT ID:RESPONSIBLE(TC 6)RESPONSIBLE SECRETARIAT ESAICS : 55.120Project Title: Cans. Tins. Tubes?Total number of Standards:9S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 10193:2003(R 2013)General use light gauge metal containers—Nominal filling volumes of round cylindrical and tape red containers of up to 40000 ml2ES ISO 10653:2003General use light gauge metal containers - nominal filling volumes of round cylindrical and tapered containers of up to 40,000 ml(Take the std from documentation)3ES ISO 10654:2003Light-gauge metal Containers - Round open-top cans - Cans for liquid products with added gas, defined by their nominal filling volumes4ES ISO 11776:2003(R 2013)Light gauge metal containers - Non-round open-top cans -Cans defined by their nominal capacities5ES ISO 11761:2003Light-gauge metal Containers - Round open-top cans - Classification sf tan sizes by construction type6ES ISO 1361:2003(R 2013)Light-gauge metal containers — Round open-top cans —Internal diameters7ES ISO 90-1:2003Light gauge metal containers definitions and determination of dimensions and capacities part 1 open -top cans(Take the std from documentation)8ES ISO 90-2:2003Light gauge metal containers definitions and determination of dimensions and capacities part 2 genera l use container9ES 964:2003Rigid plastic containers-Test methodSECTOR: Basic and Generality REVIEW 4th QuarterPROJECT ID:RESPONSIBLE(TC 6)RESPONSIBLE SECRETARIAT ESAICS : 55.130Project Title: Aerosol containersTotal number of Standards:1S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 90-3:2003(R 2013)Light gauge metal containers—Definitions and determination of dimensions and capacities—Part3:Aerosol cansSECTOR: Basic and Generality REVIEW 4th QuarterPROJECT ID:RESPONSIBLE(TC 6)RESPONSIBLE SECRETARIAT ESAICS : 55.140Project Title: Barrels. Drums. Canisters?Total number of Standards:4S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 15750-1:2012Packaging—Steeldrums—Part1:Removablehead(open head)drums with a minimum total capacity of208l,210land216,5l2ES ISO 15750-2:2012Packaging—Steeldrums—Part2:Non-removable head (tight head)drums with a minimum total capacity of 212l,216,5l and 230l3ES ISO 15750-3:2012Packaging — Steel drums — Part 3: Inserted flange-type closure systems4ES ISO 13106:2015Plastics — Blow-moulded polypropylene containers for packaging of liquid foodstuffsSECTOR: Basic and Generality REVIEW 4th QuarterPROJECT ID:RESPONSIBLE(TC 6)RESPONSIBLE SECRETARIAT ESAICS : 55.180.10Project Title: General purpose containersTotal number of Standards:11S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 10374: 2001Freight containers-Automatic Identification2ES ISO 8323: 2002Freight Containers – Air /surface (intermodal) general purpose Containers - Specification and tests3ES ISO 6346: 2001Freight Containers –Coding, identification and marking4 ES ISO 9897: 2002Freight containers — Container equipment data exchange (CEDEX) — General communication codes5ES ISO 9711-1: 2002Freight containers —Information related to containers on board vessels-Part 1:Bay plan System6ES ISO 3874: 2002Series 1 freight containers -- Handling and securing(Take the std from documentation)7ES ISO 1496-1: 2002(R 2013)Aircraft - Methodology of calculating cargo compartment volumes8ES ISO 1496-2: 2002(R 2013)Series 1 freight containers -- Specification and testing -- Part 2: Thermal containers9ES ISO 1496-3: 2001(R 2013)Series 1 freight Containers - Specification and testing - Part 3: Tank Containers for liquids, gases and pressurized dry bulk10ES ISO 1496-4: 2001(R 2013)Series 1 freight containers-Specification and testing-Part 4 non-pressurized containers for dry bulk11ES ISO 1496-5: 2001Series 1 Freight containers-Specification and testing Part 5 platform and platform-based containersSECTOR: Basic and Generality REVIEW 4th QuarterPROJECT ID:RESPONSIBLE(TC 6)RESPONSIBLE SECRETARIAT ESAICS : 55.180.20Project Title: General purpose palletsTotal number of Standards:6S.NOSTANDARD NOFULL DOCUMENT TITLE1ES CHS 217:2015Pallets for materials handling — Flat pallets — Part 2: Performance requirements and selection of tests2ES ISO 18333:2015Pallets for materials handling — Quality of new wooden components for flat pallets3ES CHS 219:2015Pallets for materials handling — Repair of flat wooden pallets4ES ISO 445:2002(R 2013)Pallets for materials handling - Vocabulary5ES CHS 218:2015Pallets for materials handling Flat pallets Part 3: Maximum working loads6ES CHS 216:2015Pallets for materials handling Flat pallets — Part 1: Test methodsSECTOR: Basic and Generality REVIEW 4th QuarterPROJECT ID:RESPONSIBLE(TC 6)RESPONSIBLE SECRETARIAT ESAICS : 55.180.30Project Title: Air mode containers, pallets and netsTotal number of Standards:3S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 4171:2002Air cargo equipment -- Interline pallets2ES ISO 10046:2002(R 2013)Aircraft - Methodology of calculating cargo compartment volumes3ES ISO 4128:2002Aircraft - Air mode modular ContainersSECTOR: Basic and Generality REVIEW 4th QuarterPROJECT ID:RESPONSIBLE(TC 6)RESPONSIBLE SECRETARIAT ESAICS : 55.180.40Project Title: Complete, filled transport packages?Total number of Standards:14S.NOSTANDARD NOFULL DOCUMENT TITLE1ES ISO 4178: 2002Complete, filled transport packages - Distribution trials - Information to be recorded2ES ISO 2206: 2002Packaging - Complete, filled transport packages - Identification of Parts when testing3ES ISO 8768: 2002Packaging - Complete, filled transport packages - Toppling test4ES ISO 2248: 2002Packaging - Complete, filled transport packages - Vertical impact test by dropping 5ES ISO 8474: 2002Packaging - Complete, filled transport packages - Water immersion test6ES ISO 2233: 2002Packaging—Complete, filled transport packages and unit loads—Conditioning for testing7ES ISO 2873: 2002Packaging—Complete, filled transport packages and unit loads—Low pressure test8ES ISO 2247: 2002Packaging—Complete, filled transport packages and unit loads—Vibration tests at fixed low frequency9ES ISO 2876: 2002Packaging - Complete, filled transport packages - Rolling test10ES ISO 2244: 2002Packaging—Complete, filled transport packages and unit loads—Horizontal impact tests11ES ISO 2234: 2002Packaging—Complete, filled transport packages and unit loads—Stacking tests using a static load12ES ISO 2875: 2002Packaging—Complete, filled transport packages and unit loads—Water-spraytest13ES ISO 8318: 2002Packaging—Complete, filled transport packages and unit loads—Sinusoidal vibration tests using a variable frequency14ES ISO 10531: 2002Packaging - Complete, filled transport packages - Stability testing of unit loads ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download