Materials List - Ruben Dario Middle School



Miami-Dade County Public SchoolsOffice of Academics and TransformationRequired ESSENTIALLaboratory ActivitiesFor the Middle SchoolM/J Comprehensive Science 3REVISED May 2013 THE SCHOOL BOARD OF MIAMI-DADE COUNTY, FLORIDAMs. Perla Tabares Hantman, ChairDr. Martin Karp, Vice ChairDr. Dorothy Bendross-MindingallMs. Susie V. CastilloMr. Carlos L. CurbeloDr. Lawrence S. FeldmanDr. Wilbert “Tee” HollowayDr. Marta PérezMs. Raquel A. RegaladoMr. Jude BrunoStudent AdvisorMr. Alberto M. CarvalhoSuperintendent of SchoolsMs. Milagros R. FornellChief Academic OfficerOffice of Academics and TransformationMs. Marie L. IzquierdoAssistant SuperintendentDivision of Academics, Accountability & School ImprovementOffice of Academics and TransformationMr. Cristian CarranzaAdministrative DirectorOffice of Academics and TransformationDr. Ava D. RosalesExecutive DirectorDepartment of Mathematics and ScienceOffice of Academics and TransformationTable of ContentsIntroduction4Annually Assessed Benchmarks5Materials List8Lab Roles10Safety Information and Contract11Pre-Lab Safety Worksheet and Approval Form12Parts of a Lab Report13Experimental Design Diagram17Claim Evidence Reasoning19Engineering Design Process20Lab Activities:Physical Properties of Matter Inquiry Lab………………………………………….………..21Density of Rocks with Differentiated Lab24Density of Rocks (Revised by University of Miami Science Made Sensible Fellows)32Mass, Volume, Density with Differentiated Lab (Comprehensive Science 3 Advanced)38Precipitating Bubbles with Differentiated Lab44Greenhouse Gases in a Bottle with Differentiated Lab56Conservation of Mass…………………………………………………………………………...60Carbon Cycle Game65Modeling Recycling of Matter and Energy Differentiated Lab78The Martian Sun-Times79Properties of Objects in the Solar System Differentiated Lab 85Imaginary Alien Life-forms with Differentiated Lab (Adaptations and Punnett Square)86Planetary Exploration and Extreme Life Forms with Differentiated Lab103Revised by University of Miami Science Made Sensible FellowsDifferentiated Lab Visualizing Our Solar System Scale Models109What Causes the Seasons?.........................................................................................................110IntroductionThe purpose of this packet is to provide the M/J Comprehensive Science 3 and Grade 8 teachers with a list of minimum basic laboratories and hands-on activities that students should experience in class. Each activity is aligned with the Next Generation Sunshine State Standards (NGSSS). Emphasis has been placed on those hands-on activities that are aligned to the Annually Assessed Benchmarks, which are assessed in the Florida Comprehensive Assessment Test 2.0 (FCAT 2.0), administered in grade eight (8). In most cases, the activities were designed as simple as possible without the use of advanced technological equipment to make it possible for all teachers to use these activities. All activities and supplements (i.e., Parts of a Lab Report) can be modified, if necessary, to fit the needs of an individual class and/or student ability.This document is intended to be used by science departments in M-DCPS so that all science teachers can work together, plan together, and rotate lab materials among classrooms. Through this practice, all students and teachers will have the same opportunities to participate in these experiences and promote discourse among learners which are the building blocks of authentic learning communities. Acknowledgement:M-DCPS Department of Mathematics and Science would like to acknowledge the efforts of the teachers who worked arduously and diligently on the preparation of this document.Annually Assessed BenchmarksNext Generation Sunshine State Standard (NGSSS) SC.8.N.1.1 Define a problem from the eighth grade curriculum using appropriate reference materials to support scientific understanding, plan and carry out scientific investigations of various types, such as systematic observations or experiments, identify variables, collect and organize data, interpret data in charts, tables, and graphics, analyze information, make predictions, and defend conclusions. (Also assesses SC.6.N.1.1, SC.6.N.1.3, SC.7.N.1.1, SC.7.N.1.3, SC.7.N.1.4, SC.8.N.1.3, and SC.8.N.1.4.) (Cognitive Complexity Level 3: Strategic Thinking and Complex Reasoning)SC.7.N.1.2 Differentiate replication (by others) from repetition (multiple trials). (Also assesses SC.6.N.1.2, SC.6.N.1.4, and SC.8.N.1.2.) (Cognitive Complexity Level 2: Basic Application of Skills and Concepts)SC.7.N.1.5 Describe the methods used in the pursuit of a scientific explanation as seen in different fields of science such as biology, geology, and physics. (Also assesses SC.7.N.3.2, SC.8.N.1.5, and SC.8.E.5.10.) (Cognitive Complexity Level 2: Basic Application of Skills and Concepts)SC.6.N.2.2 Explain that scientific knowledge is durable because it is open to change as new evidence or interpretations are encountered. (Also assesses SC.7.N.1.6, SC.7.N.1.7, SC.7.N.2.1, and SC.8.N.1.6.) (Cognitive Complexity Level 2: Basic Application of Skills and Concepts)SC.7.N.3.1 Recognize and explain the difference between theories and laws and give several examples of scientific theories and the evidence that supports them. (Also assesses SC.6.N.3.1 and SC.8.N.3.2.) (Cognitive Complexity Level 3: Strategic Thinking and Complex Reasoning)SC.8.E.5.3 Distinguish the hierarchical relationships between planets and other astronomical bodies relative to solar system, galaxy, and universe, including distance, size, and composition. (Also assesses SC.8.E.5.1 and SC.8.E.5.2.) (Cognitive Complexity Level 3: Strategic Thinking and Complex Reasoning)SC.8.E.5.5 Describe and classify specific physical properties of stars: apparent magnitude (brightness), temperature (color), size, and luminosity (absolute brightness). (Also assesses SC.8.E.5.6.) (Cognitive Complexity Level 2: Basic Application of Skills and Concepts)SC.8.E.5.7 Compare and contrast the properties of objects in the Solar System including the Sun, planets, and moons to those of Earth, such as gravitational force, distance from the Sun, speed, movement, temperature, and atmospheric conditions. (Also assesses SC.8.E.5.4 and SC.8.E.5.8.) (Cognitive Complexity Level 2: Basic Application of Skills and Concepts)SC.8.E.5.9 Explain the impact of objects in space on each other including: 1. the Sun on the Earth including seasons and gravitational attraction 2. the Moon on the Earth, including phases, tides, and eclipses, and the relative position of each body. (Cognitive Complexity Level 3: Strategic Thinking and Complex Reasoning)SC.7.E.6.2 Identify the patterns within the rock cycle and events (plate tectonics and mountain building). (Also assesses SC.6.E.6.1, SC.6.E.6.2, and SC.7.E.6.6.) relate them to surface events (weathering and erosion) and subsurface events (plate tectonics and mountain building). (Also assesses SC.6.E.6.1, SC.6.E.6.2, and SC.7.E.6.6.) (Cognitive Complexity Level 3: Strategic Thinking and Complex Reasoning)SC.7.E.6.4 Explain and give examples of how physical evidence supports scientific theories that Earth has evolved over geologic time due to natural processes. (Also assesses SC.7.E.6.3.) (Cognitive Complexity Level 3: Strategic Thinking and Complex Reasoning)SC.7.E.6.5 Explore the scientific theory of plate tectonics by describing how the movement of Earth’s crustal plates causes both slow and rapid changes in Earth’s surface, including volcanic eruptions, Earthquakes, and mountain building. (Also assesses SC.7.E.6.1 and SC.7.E.6.7.) (Cognitive Complexity Level 2: Basic Application of Skills and Concepts)SC.6.E.7.4 Differentiate and show interactions among the geosphere, hydrosphere, cryosphere, atmosphere, and biosphere. (Also assesses SC.6.E.7.2, SC.6.E.7.3, SC.6.E.7.6, and SC.6.E.7.9.) (Cognitive Complexity: Level 3: Strategic Thinking & Complex Reasoning)SC.6.E.7.5 Explain how energy provided by the Sun influences global patterns of atmospheric movement and the temperature differences between air, water, and land. (Also assesses SC.6.E.7.1.) (Cognitive Complexity: Level 3: Strategic Thinking & Complex Reasoning)SC.8.P.8.4 Classify and compare substances on the basis of characteristic physical properties that can be demonstrated or measured; for example, density, thermal or electrical conductivity, solubility, magnetic properties, melting and boiling points, and know that these properties are independent of the amount of the sample. (Also assesses SC.8.P.8.3.) (Cognitive Complexity Level 2: Basic Application of Skills and Concepts)SC.8.P.8.5 Recognize that there are a finite number of elements and that their atoms combine in a multitude of ways to produce compounds that make up all of the living and nonliving things that we encounter. (Also assesses SC.8.P.8.1, SC.8.P.8.6, SC.8.P.8.7, SC.8.P.8.8, and SC.8.P.8.9.) (Cognitive Complexity Level 1: Recall)SC.8.P.9.2 Differentiate between physical changes and chemical changes. (Also assesses SC.8.P.9.1 and SC.8.P.9.3.) (Cognitive Complexity Level 2: Basic Application of Skills and Concepts)SC.7.P.10.1 Illustrate that the Sun’s energy arrives as radiation with a wide range of wavelengths, including infrared, visible, and ultraviolet, and that white light is made up of a spectrum of many different colors. (Also assesses SC.8.E.5.11.) (Cognitive Complexity Level 1: Recall)SC.7.P.10.3 Recognize that light waves, sound waves, and other waves move at different speeds in different materials. (Also assesses SC.7.P.10.2.) (Cognitive Complexity Level 1: Recall)SC.7.P.11.2 Investigate and describe the transformation of energy from one form to another. (Also assesses SC.6.P.11.1 and SC.7.P.11.3.) (Cognitive Complexity Level 2: Basic Application of Skills and Concepts)SC.7.P.11.4 Observe and describe that heat flows in predictable ways, moving from warmer objects to cooler ones until they reach the same temperature. (Also assesses SC.7.P.11.1.) (Cognitive Complexity Level 2: Basic Application of Skills and Concepts)SC.6.P.13.1 Investigate and describe types of forces including contact forces and forces acting at a distance, such as electrical, magnetic, and gravitational. (Also assesses SC.6.P.13.2 and SC.8.P.8.2.) (Cognitive Complexity Level 2: Basic Application of Skills and Concepts)SC.6.P.13.3 Investigate and describe that an unbalanced force acting on an object changes its speed, or direction of motion, or both. (Also assesses SC.6.P.12.1.) (Cognitive Complexity Level 2: Basic Application of Skills and Concepts)SC.6.L.14.1 Describe and identify patterns in the hierarchical organization of organisms from atoms to molecules and cells to tissues to organs to organ systems to organisms. (Cognitive Complexity Level 1: Recall)SC.6.L.14.2 Investigate and explain the components of the scientific theory of cells (cell theory): all organisms are composed of cells (single-celled or multi-cellular), all cells come from preexisting cells, and cells are the basic unit of life. (Also assesses SC.6.L.14.3.) (Cognitive Complexity Level 2: Basic Application of Skills and Concepts)SC.6.L.14.4 Compare and contrast the structure and function of major organelles of plant and animal cells, including cell wall, cell membrane, nucleus, cytoplasm, chloroplasts, mitochondria, and vacuoles. (Cognitive Complexity Level 2: Basic Application of Skills and Concepts)SC.6.L.14.5 Identify and investigate the general functions of the major systems of the human body (digestive, respiratory, circulatory, reproductive, excretory, immune, nervous, and musculoskeletal) and describe ways these systems interact with each other to maintain homeostasis. (Also assesses SC.6.14.6.) (Cognitive Complexity: Level 3: Strategic Thinking & Complex Reasoning)SC.6.L.15.1 Analyze and describe how and why organisms are classified according to shared characteristics with emphasis on the Linnaean system combined with the concept of Domains. (Cognitive Complexity: Level 3: Strategic Thinking & Complex Reasoning)SC.7.L.15.2 Explore the scientific theory of evolution by recognizing and explaining ways in which genetic variation and environmental factors contribute to evolution by natural selection and diversity of organisms. (Also assesses SC.7.L.15.1 and SC.7.L.15.3.) (Cognitive Complexity: Level 3: Strategic Thinking & Complex Reasoning)SC.7.L.16.1 Understand and explain that every organism requires a set of instructions that specifies its traits, that this hereditary information (DNA) contains genes located in the chromosomes of each cell, and that heredity is the passage of these instructions from one generation to another. (Also assesses SC.7.L.16.2 and SC.7.L.16.3.) (Cognitive Complexity: Level 3: Strategic Thinking & Complex Reasoning)SC.7.L.17.2 Compare and contrast the relationships among organisms such as mutualism, predation, parasitism, competition, and commensalism. (Also assesses SC.7.L.17.1 and SC.7.L.17.3.) (Cognitive Complexity Level 2: Basic Application of Skills and Concepts)SC.8.L.18.4 Cite evidence that living systems follow the Laws of Conservation of Mass and Energy. (Also assesses SC.8.L.18.1, SC.8.L.18.2, and SC.8.L.18.3.) (Cognitive Complexity: Level 3: Strategic Thinking & Complex Reasoning)Materials ListEach list corresponds to the amount of materials needed per station (whether one student or a group of students uses the station). Lab Aprons and goggles should be assigned to each student on all labs requiring mixtures of chemicals.Physical Properties of Matter?Sugar?Wood chips?Iron (fillings or staples)?Sand?Water?MagnetCoffee filterGraduated CylinderTriple Beam BalanceThermometerBeakerHot PlateDensity of RocksGraduated cylinder250 mL beakermedicine dropperfood coloring ( not essential but helpful)100 mL graduated cylinder Eye dropperCalculator Electronic balance or triple-beam balance 5 different type of rocksTap water at room temperatureRulerDensity of Rocks (Revised by University of Miami Science Made Sensible Fellows)Vegetable oilKaro syrup1 can of coke1 can of diet cokeAquarium/container to float cokesRocks, four types, including pumice stonePlastic baggies or other container for rockstriple beam scales500ml graduated cylindersDry iceContainer for dry ice demoBubble wand and soap1 large graduated cylinder (~1000ml)Food Coloring dye 250ml FlasksEye droppersPaper towelsMass, Volume, Density (Comprehensive Science 3 Advanced)Safety goggles50 mL of isopropyl alcohol (colored red)50 mL of water (colored blue)50 mL of salt-water (colored green)Graduated cylinderEye dropperCalculatorElectronic balance or triple-beam balancePrecipitating Bubbles5 grams calcium hydroxide powderOne liter of waterFilter paperFilter funnelFlasks or small bottlesStrawsGoggles25 mL or 50 mL graduated cylinder125 mL Erlenmeyer flasksTest–tube rackAluminum foilStop watchHot PlateMaterials List (continued)Greenhouse Gases in a BottleFour: 500 mL clear water bottles with the label removedIdentical thermometers for each soda bottle Opaque tape Source of carbon dioxide (CO2)-vinegar and baking powderModeling clay Measuring spoonsBalloons500mL Erlenmeyer Flask500 mL of room temperature waterConservation of MassGraduated CylinderErlenmeyer FlaskBalloonBaking SodaTriple Beam BalanceSpoonCarbon Cycle Game7 Dice7 Station Signs7 Station Movement Directions Carbon Cycle Passport for Each StudentCarbon Atom Model for Each StudentBlank Bar Graph for Each StudentThe Martian Sun-TimesWorksheetsComputer with Internet access meter stickmarkers or colored pencils metric rulerscissorsreceipt paper rolls (adding machine tape) or old VHS tape Various spherical objects of different sizes (basketball, marbles, softball, tiny beads, soccer ball)Imaginary Alien Life-formsWorksheetsCreature CardsPlanetary Exploration and Extreme Life Forms (Differentiated Lab)computers with internet access construction paperbooks on the planetsmarkers/crayons/colored pencils3478839148539For Part 2 meter sticksreceipt paper rollsscissorsmarkers, crayons, or colored pencils00For Part 2 meter sticksreceipt paper rollsscissorsmarkers, crayons, or colored pencilsVisualizing Our Solar System Scale Models (Differentiated Lab)For Part 1Various spherical objects of different sizesGrain of sand, pebble, golf ball, tennis ballBasketball, yoga ball, etc.What Causes the Seasons?Globe of the EarthTapeMetric rulerTemperature probe or thermometerLamp with 100-watt bulbRing stand and utility clamp20-cm Length of stringLab Roles and Their DescriptionsCooperative learning activities are made up of four parts: group accountability, positive interdependence, individual responsibility, and face-to-face interaction. The key to making cooperative learning activities work successfully in the classroom is to have clearly defined tasks for all members of the group. An individual science experiment can be transformed into a cooperative learning activity by using these lab roles. Project Director (PD)The project director is responsible for the group.Roles and responsibilities:Reads directions to the groupKeeps group on taskIs the only group member allowed to talk to the teacherShares summary of group work and results with the class Materials Manager (MM)The materials manager is responsible for obtaining all necessary materials and/or equipment for the lab.Roles and responsibilities:The only person allowed to be out of his/her seat to pick up needed materialsOrganizes materials and/or equipment in the work spaceFacilitates the use of materials during the investigationAssists with conducting lab proceduresReturns all materials at the end of the lab to the designated area Technical Manager (TM)The technical manager is in charge of recording all data.Roles and responsibilities:Records data in tables and/or graphsCompletes conclusions and final summariesAssists with conducting the lab proceduresAssists with the cleanup Safety Director (SD)The safety director is responsible for enforcing all safety rules and conducting the lab.Roles and responsibilities:Assists the PD with keeping the group on-taskConducts lab proceduresReports any accident to the teacherKeeps track of timeAssists the MM as needed.When assigning lab groups, various factors need to be taken in consideration;Always assign the group members preferably trying to combine in each group a variety of skills. For example, you can place an “A” student with a “B”, a “C” and a “D” or an “F” student.Evaluate the groups constantly and observe if they are on task and if the members of the group support each other in a positive way. Rotation of lab groups and members throughout the year is encouraged.Laboratory SafetyRules:Know the primary and secondary exit routes from the classroom.Know the location of and how to use the safety equipment in the classroom.Work at your assigned seat unless obtaining equipment and chemicals.Do not handle equipment or chemicals without the teacher’s permission.Follow laboratory procedures as explained and do not perform unauthorized experiments.Work as quietly as possible and cooperate with your lab partner.Wear appropriate clothing, proper footwear, and eye protection.Report all accidents and possible hazards to the teachers.Remove all unnecessary materials from the work area and completely clean up the work area after the experiment.Always make safety your first consideration in the laboratory.Safety Contract:I will:Follow all instructions given by the teacher.Protect eyes, face and hands, and body while conducting class activities.Carry out good housekeeping practices.Know where to get help fast.Know the location of the first aid and firefighting equipment.Conduct myself in a responsible manner at all times in a laboratory situation.I, _______________________, have read and agree to abide by the safety regulations as set forth above and also any additional printed instructions provided by the teacher. I further agree to follow all other written and verbal instructions given in class.Signature: ____________________________Date: ___________________Pre-Lab Safety Worksheet and Approval FormThis form must be completed with the teacher’s collaboration before the lab.Student Researcher Name: __________________________________________Period # _____Title of Experiment: ____________________________________________________________Place a check mark in front of each true statement below: ? I have reviewed the safety rules and guidelines. This lab activity involves one or more of the following: ? Human subjects (Permission from participants required. Subjects must indicate willingness to participate by signing this form below.) ? Vertebrate Animals (requires an additional form) ? Potentially Hazardous Biological Agents (Microorganisms, molds, rDNA, tissues, including blood or blood products, all require an additional form.) ? Hazardous chemicals (such as: strong acids or bases) ? Hazardous devices (such as: sharp objects or electrical equipment) ? Potentially Hazardous Activities (such as: heating liquids or using flames)? I understand the possible risks and ethical considerations/concerns involved in this experiment.? I have completed an Experimental/Engineering Design Diagram.Show that you understand the safety and ethical concerns related to this lab by responding to the questions below. Then, sign and submit this form to your teacher before you proceed with the experiment (use back of paper, if necessary).A. Describe what you will be doing during this lab.B. What are the safety concerns with this lab that were explained by your teacher? How will you address them?C. What additional safety concerns or questions do you have?D. What ethical concerns related to this lab do you have? How will you address them?Student Researcher’s Signature/Date:Teacher Approval Signature:__________________________________________________________________Human Subjects’ Agreement to Participate:___________________________________________________________Printed Name/Signature/Date Printed Name/Signature/Date____________________________________________________________Printed Name/Signature/Date Printed Name/Signature/DateParts of a Lab ReportA Step-by-Step ChecklistA good scientist reflects on their work by writing a lab report. A lab report is a recap of what a scientist investigated. It is made up of the following parts.Title (underlined and on the top center of the page)Benchmarks Covered: Your teacher should provide this information for you. It is a summary of the main concepts that you will learn about by carrying out the experiment.Problem Statement:Identify the research question/problem and state it clearly.Potential Hypothesis (e.g.):State the hypothesis carefully. Do not just guess but try to arrive at the hypothesis logically and, if appropriate, with a calculation.Write down your prediction as to how the test variable (independent variable) will affect the outcome variable (dependent variable) using an “if” and “then” statement.If (state the test variable) is (choose an action), then (state the outcome variable) will (choose an action).Materials:Record precise details of all equipment usedFor example: a balance weighing to +/- 0.001 g, a thermometer measuring from -10 to +110oC to an accuracy of +/- 0.1oC, etc.Record precise details of any chemicals usedFor example: 5 g of copper (II) sulfate pentahydrate CuSO4.5H2O(s).Procedure:Do not copy the procedures from the lab manual or handout.Summarize the procedures; be sure to include critical steps.Give accurate and concise details about the apparatus and materials used.Variables and Control Test:Identify the variables in the experiment. State those over which you have control. There are three types of variables.Test Variable (Independent Variable): (also known as the tested variable) the factor that can be changed by the investigator (the cause).Outcome Variable (Dependent Variable): (also known as the outcome variable) the observable factor of an investigation which is the result or what happened when the independent variable was changed.Controlled variables (Constants): the other identified independent variables in the investigation that are kept constant or remain the same during the investigation.Identify the control test. A control lest is the separate experiment that serves as the standard for comparison to identify experimental effects, changes of the dependent variable resulting from changes made to the independent variable.Data:Ensure that all data is recorded. Pay particular attention to significant figures and make sure that all units are stated.Present your results clearly. Often it is better to use a table or a graph. If using a graph, make sure that the graph has a title, both axis are labeled clearly, and that the correct scale is chosen to utilize most of the graph space.Record all observations. Include color changes, solubility changes, whether heat was evolved or taken in, etc.Results:Ensure that you have used your data correctly to produce the required result in words and provide graphs.Include any other errors or uncertainties which may affect the validity of your result.Conclusion and Evaluation:A conclusion statement answers the following 7 questions in at least three paragraphs.First Paragraph: IntroductionWhat was investigated? Describe the problem.Was the hypothesis supported by the data?Compare your actual result to the expected result (either from the literature, textbook, or your hypothesis)Include a valid conclusion that relates to the initial problem or hypothesis. What were your major findings?Did the findings support or not support the hypothesis as the solution to the restated problem?Calculate the percentage error from the expected value.Middle Paragraphs: These paragraphs answer question 4 and discusses the major findings of the experiment using data.How did your findings compare with other researchers?Compare your result to other students’ results in the class.The body paragraphs support the introductory paragraph by elaborating on the different pieces of information that were collected as data that either supported or did not support the original hypothesis.Each finding needs its own sentence and relates back to supporting or not supporting the hypothesis.The number of body paragraphs you have will depend on how many different types of data were collected. They will always refer back to the findings in the first paragraph.Last Paragraph: ConclusionWhat possible explanations can you offer for your findings?Evaluate your method. State any assumptions that were made which may affect the result. What recommendations do you have for further study and for improving the experiment?Comment on the limitations of the method chosen.Suggest how the method chosen could be improved to obtain more accurate and reliable results.What are some possible applications of the experiment?How can this experiment or the findings of this experiment be used in the real world for the benefit of society?Parts of a Lab Report ReminderStep 1: Stating the Purpose/ProblemWhat do you want to find out? Write a statement that describes what you want to do. It should be as specific as possible. Often, scientists read relevant information pertaining to their experiment beforehand. The purpose/problem will most likely be stated as a question such as:“What are the effects of _________ on ___________?”Step 2: Defining VariablesTEST VARIABLE (TV) (also called the independent variable) – The variable that is changed on purpose for the experiment; you may have several levels of your test variable.OUTCOME VARIABLE (OV) (also called the dependent variable) – The variable that acts in response to or because of the manipulation of the test variable.CONTROLLED VARIABLES (CV) – All factors in the experiment that are NOT allowed to change throughout the entire experiment. Controlling variables is very important to assure that the results are due only to the changes in the test variable; everything (except the test variable) must be kept constant in order to provide accurate results.Step 3: Forming a HypothesisA hypothesis is an inferring statement that can be tested.The hypothesis describes how you think the test variable will respond to the outcome variable. (i.e., If….., then……)It is based on research and is written prior to the experiment. Never change your hypothesis during the experiment.For example: If the temperature increases, then the rate of the reaction will increase.Never use “I,” “we,” or “you” in your hypothesis (i.e. I believe or I think that…)It is OK if the hypothesis is not supported by the data. A possible explanation for the unexpected results should be given in the conclusion Step 4: Designing an Experimental ProcedureSelect only one thing to change in each experimental group (test variable).Change a variable that will help test the hypothesis.The procedure must tell how the variable will be changed (what are you doing?).The procedure must explain how the change in the variable will be measured.The procedure should indicate how many trials would be performed (usually a minimum of 3-4 for class experiments). It must be written in a way that someone can copy your experiment, in step by step format.Step 5: Results (Data)Qualitative Data is comprised of a description of the experimental results (i.e. larger, faster….).Quantitative Data is comprised of results in numbers (i.e. 5 cm, 10.4 grams)The results of the experiment will usually be compiled into a table/chart for easy interpretation.A graph of the data (results) may be made to more easily observe trends.Step 6: ConclusionThe conclusion should be written in paragraph form. It is a summary of the experiment, not a step-by-step description. Does the data support the hypothesis? If so, you state that the hypothesis is accepted. If not, you reject the hypothesis and offer an explanation for the unexpected result. You should summarize the trend in data in a concluding statement (ex: To conclude, the increase in temperature caused the rate of change to increase as shown by the above stated data.). Compare or contrast your results to those from similar experiments. You should also discuss the implications for further study. Could a variation of this experiment be used for another study? How does the experiment relate to situations outside the lab? (How could you apply it to real world situations?)Student’s name: _____________________________________________ Date: ________________Period: _______Experimental Design DiagramThis form should be completed before experimentation.Title: Problem Statement:Null Hypothesis:Research Hypothesis:Test Variable (Independent Variable) Number of Tests:Subdivide this box to specify each variety.Control Test:# of Trials per Test:Outcome Variable (Dependent Variable) Controlled Variables1. 2.3. 4. 5. 6. Experimental Design Diagram Hints:Title: A clear, scientific way to communicate what you’re changing and what you’re measuring is to state your title as, "The Effect of ____________on__________." The tested variable is written on the first line above and the outcome variable is written on the second line.Problem Statement: Use an interrogative word and end the sentence with a question mark. Begin the sentence with words such as: How many, How often, Where, Will, or What. Avoid Why.Null Hypothesis: This begins just like the alternate hypothesis. The sentence should be in If ............, then........... form. After If, you should state the TV, and after the then, you should state that there will be no significant difference in the results of each test group.Research Hypothesis: If ____________(state the conditions of the experiment), then ____________(state the predicted measurable results). Do not use pronouns (no I, you, or we) following If in your hypothesis. Test Variable (TV): This is the condition the experimenter sets up, so it is known before the experiment (I know the TV before). In middle school, there is usually only one TV. It is also called the independent variable, the IV.Number of Tests: State the number of variations of the TV and identify how they are different from one another. For example, if the TV is "Amount of Calcium Chloride" and 4 different amounts are used, there would be 4 tests. Then, specify the amount used in each test.Control Test: This is usually the experimental set up that does not use the TV. Another type of control test is one in which the experimenter decides to use the normal or usual condition as the control test to serve as a standard to compare experimental results against. The control is not counted as one of the tests of the TV. In comparison experiments there may be no control test.Number of Trials: This is the number of repetitions of one test. You will do the same number of repetitions of each variety of the TV and also the same number of repetitions of the control test. If you have 4 test groups and you repeat each test 30 times, you are doing 30 trials. Do not multiply 4 x 30 and state that there were 120 trials.Outcome Variable(s): This is the result that you observe, measure and record during the experiment. It’s also known as the dependent variable, OV. (I don’t know the measurement of the OV before doing the experiment.) You may have more than one OV. Controlled Variables or Variables Held Constant: Controlled Variables (Constants) are conditions that you keep the same way while conducting each variation (test) and the control test. All conditions must be the same in each test except for the TV in order to conclude that the TV was the cause of any differences in the results. Examples of Controlled Variables (Constants): Same experimenter, same place, time, environmental conditions, same measuring tools, and same techniques.CONCLUSION WRITINGClaim, Evidence and ReasoningStudents should support their own written claims with appropriate justification. Science education should help prepare students for this complex inquiry practice where students seek and provide evidence and reasons for ideas or claims (Driver, Newton and Osborne, 2000). Engaging students in explanation and argumentation can result in numerous benefits for students. Research shows that when students develop and provide support for their claims they develop a better and stronger understanding of the content knowledge (Zohar and Nemet, 2002). When students construct explanations, they actively use the scientific principles to explain different phenomena, developing a deeper understanding of the content. Constructing explanations may also help change students’ view of science (Bell and Linn, 2000). Often students view science as a static set of facts that they need to memorize. They do not understand that scientists socially construct scientific ideas and that this science knowledge can change over time. By engaging in this inquiry practice, students can also improve their ability to justify their own written claims (McNeill et al., 2006). Remember when providing evidence to support a claim, the evidence must always be:AppropriateAccurateSufficientThe rubric below should be used when grading lab reports/conclusions to ensure that students are effectively connecting their claim to their evidence to provide logical reasons for their conclusions.Base Explanation RubricComponentLevel012Claim - A conclusion that answers the original question.Does not make a claim, or makes an inaccurate claim.Makes an accurate but incomplete claim.Makes an accurate and complete claim.Evidence – Scientific data that supports the claim. The data needs to be appropriate and sufficient to support the claim.Does not provide evidence, or only provides inappropriate evidence (evidence that does not support the claim).Provides appropriate but insufficient evidence to support claim. May include some inappropriate evidence.Provides appropriate and sufficient evidence to support claim.Reasoning – A justification that links the claim and evidence. It shows why the data count as evidence by using appropriate and sufficient scientific principles.Does not provide reasoning, or only provides reasoning that does not link evidence to claimProvides reasoning that links the claim and evidence. Repeats the evidence and/or includes some – but not sufficient – scientific principles.Provides reasoning that links evidence to claim. Includes appropriate and sufficient scientific principles.McNeill, K. L. & Krajcik, J. (2008). Inquiry and scientific explanations: Helping students use evidence and reasoning. In Luft, J., Bell, R. & Gess-Newsome, J. (Eds.). Science as inquiry in the secondary setting. (p. 121-134). Arlington, VA: National Science Teachers Association Press.Engineering Design ProcessStep 1Identify the Need or ProblemStep 3Develop Possible Solution(s)Step 2Research the Need or ProblemStep 6Test and Evaluate the Solution(s)Step 7Communicate the Solution(s)Step 8RedesignStep 5Construct a PrototypeStep 4Select the Best Possible Solution(s)Step 1Identify the Need or ProblemStep 3Develop Possible Solution(s)Step 2Research the Need or ProblemStep 6Test and Evaluate the Solution(s)Step 7Communicate the Solution(s)Step 8RedesignStep 5Construct a PrototypeStep 4Select the Best Possible Solution(s)Identify the need or problem Research the need or problem Examine current state of the issue and current solutions Explore other options via the internet, library, interviews, etc.Determine design criteria Develop possible solution(s) Brainstorm possible solutions Draw on mathematics and science Articulate the possible solutions in two and three dimensions Refine the possible solutions Select the best possible solution(s) Determine which solution(s) best meet(s) the original requirements Construct a prototype Model the selected solution(s) in two and three dimensions Test and evaluate the solution(s) Does it work? Does it meet the original design constraints? Communicate the solution(s) Make an engineering presentation that includes a discussion of how the solution(s) best meet(s) the needs of the initial problem, opportunity, or need Discuss societal impact and tradeoffs of the solution(s) Redesign Overhaul the solution(s) based on information gathered during the tests and presentation Source(s): Massachusetts Department of Elementary and Secondary Education INQUIRY LAB: PHYSICAL PROPERTIES OF MATTERFlorida Next Generation Sunshine State Standards Benchmark(s): SC.8.P.8.4 Classify and compare substances on the basis of characteristic physical properties that can be demonstrated or measured; for example, density, thermal or electrical conductivity, solubility, magnetic properties, melting and boiling points, and know that these properties are independent of the amount of the sample. (AA - Also assesses SC.8.P.8.3.)SC.7.N.1.2 Differentiate replication (by others) from repetition (multiple trials). (AA)Materials:?Sugar?Wood chips?Iron (fillings or staples)?Sand?Water?Magnet?Coffee filter?Graduated cylinder?Triple beam balance?Thermometer?Beaker?Hot plateEngage:“Mystery balloons”: place common objects or materials (penny, key, battery, flour, etc.) in deflated rubber balloons and tie. Have students use their senses to try to identify the contents based on physical properties.Teacher shows Studyjams-Properties of Matter on the SmartBoard. Part 1: Separating MatterObjective: Students will design their own method to separate contents of a mixture based on the physical properties of each substance.Pre-lab set up (by teacher): Combine sugar, sand, wood, and iron into a beaker for each lab group.Procedure: Record the steps you take to separate the substances in the mixture. Remember to be as specific as possible so that your results are replicable!!Answer Key:The possible steps are written in red. Students should create their OWN procedures.Run magnet through mixture to separate iron based on magnetism.Pour water over mixture to separate wood based on density. Wood is less dense than water.Use filter to remove sand from mixture since sand is not soluble in water.Use hot plate to separate sugar from water. Water will evaporate first since it has a lower boiling point than sugar. Conclusion Questions:Summarize: How did you separate the materials in the beaker? Answers will varyWhy is it important for scientists to write detailed procedures? So that other scientists can replicate the study and verify the validity of the results.Why didn’t you measure the melting points of sand, wood, or iron in this lab? Their melting points are too high to safely observe in this lab.Would the physical properties of a material change if the size of the material is changed? Explain. No, physical properties are independent of sample sizeDid you have to completely alter /chemically change any of the materials to measure their physical properties? Explain. No, can measure physical properties without changing the substance.Scientists often find mysterious materials. Explain how physical properties are important for identifying unknown substances. Scientists can use the various physical properties such as melting point, boiling point, thermal or electrical conductivity, magnetism, density and solubility of the unknown substance to compare to known substances and correctly identify the substance or discover a new substance.Name: ___________________________________________ Period: ________ Date: _________Separating Matter Procedure: Record the steps you take to separate the substances in the mixture. Remember to be as specific as possible so that your results are replicable!MaterialPhysical Property used to separate from mixtureExplanationSugarSandWoodIronPart 2: Measuring physical propertiesStudent task: Use your observations and the tools provided to measure the physical properties of the substances you separated in Part 1.Material:SugarSandWoodIronColor:Texture:Odor:Soluble in water?Density: (Density= mass/ volume)Mass:Volume:Density=Mass:Volume:Density=Mass:Volume:Density=Mass:Volume:Density=Magnetic?Melting point:XXXConclusion Questions:Summarize: How did you separate the materials in the beaker?Why is it important for scientists to write detailed procedures? Why didn’t you measure the melting points of sand, wood, or iron in this lab? Would the physical properties of a material change if the size of the material is changed? Explain. Did you have to completely alter /chemically change any of the materials to measure their physical properties? Explain. Scientists often find mysterious materials. Explain how physical properties are important for identifying unknown substances.DENSITY OF ROCKSAdapted from: .uk/.../Chemistry/ StructBond/c00195b.htmlFlorida Next Generation Sunshine State Standards Benchmark(s): SC.8.N.1.1 Define a problem from the eighth grade curriculum using appropriate reference materials to support scientific understanding, plan and carry out scientific investigations of various types, such as systematic observations or experiments, identify variables, collect and organize data, interpret data in charts, tables, and graphics, analyze information, make predictions, and defend conclusions. (AA)SC.8.P.8.3 – Explore and describe the densities of various materials through measurement of their masses and volumes. Assessed as SC.8.P.8.4 – Classify and compare substances on the basis of characteristic physical properties that can be demonstrated or measured; for example, density, thermal or electrical conductivity, solubility, magnetic properties, melting and boiling points, and know that these properties are independent of the amount of the sample.Background Information for the teacher:Density is a basic physical property of any sample of matter. It is much more important than other physical properties such as size or shape, in that the numerical value of density for a pure substance at a particular temperature and pressure is a constant and never changes! The density may be determined in the laboratory if the mass and volume of a sample can be determined. Density may be calculated by dividing the mass by the volume (d = m / V). It also may be thought of as the ratio of the mass to the volume. The density of water is important to know. It is 1.0 g/mL at 40C.In this experiment, the student will measure the mass, volume, and the length of several rocks. They will then use their data to explore the relationship between the mass and volume of the rocks and calculate their density. 35579054762500MaterialsGraduated cylinder250 mL beakermedicine dropperfood coloring ( not essential but helpful)100 mL Graduated cylinder Eye dropperCalculator Electronic balance or triple-beam balance 5 different type of rocksTap water at room temperaturerulerTeacher Pre-Lab Preparation and Presentation:Color the water by adding a few drops of food coloring.Engage: (students should develop procedures similar to the ones in the Explore section)Teacher will engage students in discussion with the following questions to determine students’ pre-conceptions. Record responses on the board:Observe the 5 rocks and estimate which rock could have the largest mass, volume and density? Will the largest rock (largest volume) have the largest mass?What is density? What do you need to know to calculate density?Mass/Volume is a ratio which represents density.Predict which rock would have the greatest density and smallest density.Would the largest rock be the most dense and the smallest rock the least dense?Would all of these rocks sink in water?Explore (students should come up these procedures and how they can be completed in the engagement)On the electronic or triple beam balance mass each rock in grams (g). Record your measurement in the data table Pour 50 mL of the colored water into the graduated cylinder. Use the dropper to get the exact amount of 50 mL.Drop the first rock into the graduated cylinder and determine the volume of the rock in milliliter (mL) using the water displacement method. Record your measurement in the data table.Final volume (water with rock) – Initial volume (50 mL of water) = Volume of the rock (use cm3 since rocks are a solid and 1 mL = 1 cm3). To get a precise measurement, place the cylinder on a flat surface, bring your “eye” down to the level of the liquid, and read the bottom of the meniscus. Repeat step 3 with the other 4 rocks. Record your measurement (cm3) in the data table.Finally calculate the density of each rock, using the following formula:Density = Mass/VolumeUsing the unit for density (g/cm3) Record your measurement in the data table.Data Table: Density of Rocks Rock Mass (g)Final-Initial=Volume of rock (cm3)Density (g/cm3)12345Figure 1Densities of Some Common RocksRockDensityAndesite2.5 - 2.8Basalt2.8 - 3.0Coal1.1 - 1.4Diabase2.6 - 3.0Diorite2.8 - 3.0Dolomite2.8 - 2.9Gabbro2.7 - 3.3Gneiss2.6 - 2.9Granite2.6 - 2.7Gypsum2.3 - 2.8Limestone2.3 - 2.7Marble2.4 - 2.7Mica schist2.5 - 2.9Peridotite3.1 - 3.4Quartzite2.6 - 2.8Rhyolite2.4 - 2.6Rock salt2.5 - 2.6Sandstone2.2 - 2.8Shale2.4 - 2.8Slate 2.7 - 2.8Explain Analysis Questions:Which variable is considered the test variable (independent variable) in this lab activity? Which variable (s) is considered the outcome variable (dependent variable) in this lab activity? If the mass of the rock increases, what could happen to the density of each sample?If the volume of the rock increases, what would happen to the density of each sample? Analyze your data: What do you observe about the relationship between mass and volume for the rocks with the larger densities and smaller densities? Give examples from the lab in your explanation. In terms of density, differentiate between an object which floats in water and an object which sinks in water. Show how one would set up a ratio to determine the mass of a substance with a density of 8.4g/mL and a volume of 2.0 mL. Determine the mass. Show how one would set up a ratio to determine the volume of a substance with a density of 4.0 g/mL and a mass of 8.0 g. Determine the volume. Based on the results of this lab, explain how unknown substances can be identified or distinguished from one another by using their densities.Bonus question:392874531432500Density of water is 1 g/ml or 1.0 g/cm3). What is the volume of a sample of water if the mass is 6g? Explain why this is so easy to figure out (think ratio). 22860064135.uk/.../Chemistry/ StructBond/c00195b.html00.uk/.../Chemistry/ StructBond/c00195b.htmlElaborate:Provide students with the following data derived from a set of Density Blocks Figure 2Densities of Common SubstancesSource: Teacher Developed – Classroom TestedSubstanceDensity (g/cm3)Acrylic1.1 – 1.2Aluminum2.7Brass8.4 – 8.8Copper8.96Oak0.60 – 0.90 Pine0.35 – 0.50 Polypropylene0.91 – 0.94PVC1.39 – 1.42 Steel7.9Water1.0Provide students with the following information: You have been given blocks of equal volume. You may want to provide the Density Block samples or have students make cubes 2.54 cm x 2.54 cm x 2.54 cm-952507302500540067573025004667250730250039909757302500335280073025002714625730250019907257302500124777573025005810257302500Based on the densities of the various substances listed in the data table above, ask students to make predictions whether the block made of the various materials would sink or float in water.BlockPrediction (sink or float)Observation (sink or float)AcrylicAluminumBrassCopperOakPinePolypropylenePVCSteelAcrylicEvaluateIf two blocks of pine were stacked on top of each other, would they sink or float? Explain. Extensions:Students will explore the density of different liquids and/or solutions, e.g. 5%, 10%, 15% saltwater solution. Discover the relationship between density and the solute concentration.Possible AnswersExplain Analysis Questions:Which variable is considered the test variable (independent) variable in this lab activity? Type of rockWhich variable (s) is considered the outcome variable (dependent) variable in this lab activity? densityIf the mass of the rock increases, what could happen to the density of each sample? Increase if volume stays sameIf the volume of the rock increases, what would happen to the density of each sample? It would stay the same because the mass would also increaseAnalyze your data: What do you observe about the relationship between mass and volume for the rocks with the larger densities and smaller densities? Give examples from the lab in your explanation. Larger densities have larger mass compared to the object’s volume; smaller densities have larger volume compared to the mass. Examples will varyIn terms of density, differentiate between an object which floats in water and an object which sinks in water. An object that floats in water is less dense than the water or less than 1 g/cm3 . An object that sinks has a greater density than water.Show how one would set up a ratio to determine the mass of a substance with a density of 8.4g/mL and a volume of 2.0 mL. Determine the mass. 8.4g/mL = ?g/2.0 mL mass = 16.8 gShow how one would set up a ratio to determine the volume of a substance with a density of 4.0 g/mL and a mass of 8.0 g. Determine the volume. 4.0 g/mL = 8.0 g/?mL volume = 2 mLBased on the results of this lab, explain how unknown substances can be identified or distinguished from one another by using their densities. All substances have a specific density. If the mass and volume can be determined, then the substance can be found by comparing with substances of known densities.Bonus question:382841535623500Density of water is 1 g/ml or 1.0 g/cm3). What is the volume of a sample of water if the mass is 6g? Explain why this is so easy to figure out (think ratio). The density of water is a 1:1 ratio 6 g would mean 6 mLEvaluateIf two blocks of pine were stacked on top of each other, would they sink or float? Explain: The blocks would float. The wood is still less dense than water. For example, if the mass doubles, so does the volume, keeping the density the same.Note: Use real examples for students to measure and test.22860064135.uk/.../Chemistry/ StructBond/c00195b.html00.uk/.../Chemistry/ StructBond/c00195b.htmlAdditional Background Information - Density of RocksSource: Certain properties of a substance are both distinctive and relative easy to determine. Density, the ratio between a sample’s mass and volume at specific temperature and pressure (like standard ambient temperature and pressure), is one such property. Regardless of the size of a sample, the density of a substance will always remain the same. The density of a rock sample can, therefore, be used in the identification process.Typical densities for some types of rock are: - Basalt 3 g/cm3 (187 lbm/ft3) - Granite 2.7 g/cm3 (169 lbm/ft3) - Sandstone 2.3 g/cm3 (144 lbm/ft3)Some rocks are heavier and others much lighter than those listed above. For example, Pumice is a rock formed from solidified foamy volcanic lava. It is full of spaces full of gas, rather like a sponge. Some examples of Pumice are half the density of water, at 0.5 g/cm3. Density varies significantly among different rock types because of differences in mineralogy and porosity. Knowledge of the distribution of underground rock densities can assist in interpreting subsurface geologic structure and rock type.While density may vary only slightly from rock to rock, detailed sampling and correlation with other factors like depth may reveal important information about the history of a core, or may help to improve the use of seismic profiles. The average density of oceanic crust is 3.0 g/cm3 while continental crust has an average density of 2.7 g/cm3. STUDENT HANDOUTDIFFERENTIATED INSTRUCTION: OPEN INQUIRYdensity of matterObjectives/Purpose: Determine the physical properties of matter including the density of irregular solids. Demonstrate that regardless of the size of a sample, the density of a substance will always remain the same.Classify and compare substances on the basis of characteristic physical properties that can be demonstrated or measuredDemonstrate Achievement of the following Goals:Develop a problem statement based on a physical property of matter and the size of the sample that you would like to investigate. State your hypothesis.Design an experiment to test your hypothesis.Carry out the experiment you designed.Submit a completed lab report to your teacher.Use the “Claim, Evidence & Reasoning” rubric to defend your claims when writing your conclusion.DENSITY OF ROCKS (Differentiated Lab)Revised by: University of Miami – Science Made Sensible FellowsFlorida Sunshine State Next Generation Standards Benchmark: SC.8.P.8.4 Classify and compare substances on the basis of characteristic physical properties that can be demonstrated or measured for example, density, thermal or electrical conductivity, solubility, magnetic properties, melting and boiling points, and know that these properties are independent of the amount of the sample. (AA)SC.8.P.8.3 Explore and describe the densities of various materials through measurement of their masses and volumes.Background Information for the teacher:Density is a basic physical property of any sample of matter. It is much more important than other physical properties such as size or shape, in that the numerical value of density for a pure substance at a particular temperature and pressure is a constant and never changes! The density may be determined in the laboratory if the mass and volume of a sample can be determined. Density may be calculated by dividing the mass by the volume (d = m / V). It also may be thought of as the ratio of the mass to the volume. The density of water is important to know. It is 1.0 g/mL at 4oC. In this experiment, the student will measure the mass, volume, and the length of several rocks. They will then use their data to explore the relationship between the mass and volume of the rocks and calculate the rocks’ density.Time Frame: 1-1.5 hoursMaterials:DemonstrationsVegetable oilKaro syrup 1 can of coke1 can of diet cokeAquarium/container to float cokesDry iceContainer for dry ice demoBubble wand and soap1 large graduated cylinder (~1000ml)Lab ActivityRocks, four types, including pumice stonePlastic baggies or other container for rockstriple beam scales500ml graduated cylinders250ml FlasksEye droppersPaper towelsFood Coloring dye (for demo also)Pre-lab preparation:Color the water/oil/karo syrup demo with food coloringSelect 4 rocks with very different densities as available. One should be pumice stone. Alter the comic strip and student worksheet (clues) so that the “evidence” rock density matches the density of one of the types of rock you have available.Gather and prepare demonstration supplies as desired.Engage:Engage the students by discussing the topic of density as a class, explaining how it is a relationship between mass and volume.Perform one or more of the following demonstrations:Water/Oil/Syrup layering: Discuss with the class what you will be doing, and have them make predictions of how the three liquids will layer in the 1000ml graduated cylinder. Start with ~250ml of colored water in the cylinder, then add vegetable oil (~100ml) and finally add Karo syrup (~100ml). Discuss why the fluids became layered.Coke vs. Diet Coke: Explain what you are going to do, and have your class predict whether the sodas will sink or float. In a clear container (aquarium) filled with water, place a regular coke or comparable soda. Discuss why the soda sank. Next, add the diet coke (it will float). Discuss why a can with the exact same volume will float because it has less mass and therefore is less dense.Dry ice/bubbles: In a container that is at least 12 inches deep, place the dry ice. Add some water to speed up the sublimation process and make the gas visible to the students. Then, blow bubbles gently on top of the CO2 gas. Discuss with your class why the bubbles did not sink through the CO2, and how density applies to gases also. (this is also useful at the end of the lab as they elaborate on the concept of density)Engage the students further by reading the “CSI: Following the Hard Evidence” comic (source: ). Explore:Give the student all the supplies and the procedures worksheet. Discuss the concept of volume displacement for determining the volume of non-geometric items.Have student complete the procedures while you assist and answer questions. You may need to help them measure the volume of the pumice stone by pushing it completely under the surface of the water using a pencil. Explain:Have students complete the analysis questions at the end of the lab.Discuss any questions as a class.Elaborate/Extension:Students can explore the density of objects with identical masses, but different volumes. Discover the relationship among mass, volume, and density.Students can explore the density of different liquids and/or solutions, e.g. 5%, 10%, 15% saltwater solution. Discover the relationship between density and the solute concentration.This is a good time to do the dry ice demo in order to elaborate that the property density applies to gases also.66040-22288500168910-33972500C.S.I. Density of Rocks: Following the HARD EVIDENCEGoal: Determine the densities of 4 different types of rocks in order to match the “hard evidence” found at the crime scene.Overview: The density of each rock will be calculated by using volume displacement and measuring massProceduresLook at the rocks and make a prediction about which one you think is the most dense or the least dense. Record your hypothesis, independent variable, and dependent variable, controlled variables and control.Remove your rocks from the evidence bag.Measure the mass of each rock on the balance, record it on this worksheet.Pour 150ml of water from the 500ml beaker into the graduated cylinder. Use the dropper to adjust it exactly to 150ml. This is the INITIAL VOLUME.Place one rock into the graduated cylinder, then determine the volume of water in the cylinder by looking at the BOTTOM OF THE MENISCUS. Record this FINAL VOLUME on your worksheet.Remove the rock by pouring the water back into the beaker and catching the rock with one hand so it doesn’t break the glass. Try not to spill!!Refill the graduated cylinder to 150ml, add the next rock, measure the volume, and record it on your worksheet. Repeat for the third and fourth rocks, drying them with a paper towel and putting them back into their bags.Calculate the volume of each rock by subtracting the initial volume of water (150ml) from the final volume of the water with the rock. Record this on your worksheet.Calculate the density of each rock on the worksheet (Density= Mass/Volume).Answer the questions under the data table on your worksheet and write a conclusion.CLUES:The detectives found a rock at the crime scene that had a density of _____ grams/cm3There are three suspects, each live in an area with a different type of rock. The equation for density is: density= mass/volumeData TableRock Mass (g)Final Volume(water +rock)Rock Volume (final volume- initial volume)Density (D=m/v)Creepy CarlSuspicious SusanNaughty NathanPolice StationQuestions: Which rock most closely matched the density of the evidence found at the crime scene?Did all the rocks sink? If not, what can you tell about the density of that rock without doing any calculations?For the rock that didn’t sink, if you put a larger sample in the water, would it sink? Why or why not?If you start with 100ml of water, how many grams of Naughty Nathan’s rock would you need to add to your graduated cylinder to increase the volume by 100ml? (remember the equation for density is density=mass/volume, use the density you calculated above)If the mass of the rock increases, what could happen to the volume of each sample?If the volume of the rock increases, what could happen to the mass of each sample?Explain density in terms of a ratio. Give examples from the lab in your explanation.What is the volume of a sample of water if the mass is 6.7g? Explain why this is so easy to figure out.Show how one would set up a ratio to determine the mass of a substance with a density of 5.6g/mL and a volume of 3.7 mL. Then determine the mass. Show how one would set up a ratio to determine the volume of a substance with a density of 2.6 g/mL and a mass of 5.5 g. Then determine the volume.Conclusion: Write a conclusion using the “Claim, Evidence and Reasoning” format.MASS, VOLUME, DENSITY(Comprehensive Science 3 Advanced)Florida Next Generation Sunshine State Standards Benchmark: SC.8.N.1.1 Define a problem from the eighth grade curriculum using appropriate reference materials to support scientific understanding, plan and carry out scientific investigations of various types, such as systematic observations or experiments, identify variables, collect and organize data, interpret data in charts, tables, and graphics, analyze information, make predictions, and defend conclusions. (AA)SC.8.P.8.3 – Explore and describe the densities of various materials through measurement of their masses and volumes. Assessed as SC.8.P.8.4 – Classify and compare substances on the basis of characteristic physical properties that can be demonstrated or measured; for example, density, thermal or electrical conductivity, solubility, magnetic properties, melting and boiling points, and know that these properties are independent of the amount of the sample. (AA)Background Information:Density is a basic physical property of any sample of matter. It is much more important than other physical properties such as size or shape, in that the numerical value of density for a pure substance at a particular temperature and pressure is a constant and never changes! The density may be determined in the laboratory if the mass and volume of a sample can be determined. Density may be calculated by dividing the mass by the volume (d = m / V). It also may be thought of as the ratio of the mass to the volume. The density of water is important to know. It is 1.0 g/mL at 4 ?C.In this experiment, the students will measure the mass and volume of several materials. They will then use their data to explore the relationship between the mass and volume of the materials and calculate their density.Literature Connection: “Archimedes and the King’s Crown”Time Frame: 1 hourMaterials (per pair of students):Safety gogglesGraduated cylinder50 mL of isopropyl alcohol (colored red)Eye dropper50 mL of water (colored blue)Calculator50 mL of salt-water (colored green) Electronic balance or triple-beam balanceProcedurePart A: Teacher Pre-Lab Preparation and PresentationColor the isopropyl alcohol red by adding a few drops of red food coloring.Color the water blue by adding a few drops of blue food coloring.Prepare a saltwater solution by mixing four parts water to one part salt by volume. Color the solution green using a few drops of green food coloring.Show the students the three solutions and ask them to suggest a way to compare the masses of the three liquids.Guide the discussion towards the realization that in order to compare the masses, equal volumes would have to be massed. Ask students to predict how the masses of the different liquids would be vary if the volume of each liquid is the same. Based on their predictions, have students formulate a hypothesis.The topic of density as the relationship between mass and volume can now be introduced. Part B: Student ProcedureOn the electronic balance, mass the graduated cylinder and press "tare" to subtract the mass. If you are using a triple beam balance, mass the graduated cylinder and record this mass to the nearest 0.01g. Record the mass of the empty cylinder in the Data Table.Pour 10 mL of the red liquid into the graduated cylinder. Use an eyedropper to get the exact amount of 10.0 mL.To get a precise measurement, place the cylinder on a flat surface, bring your “eye” down to the level of the liquid, and read the bottom of the meniscus.Determine the mass of the 10.0 mL by reading the electronic balance directly, or if using a triple- beam balance, record the total mass (cylinder + liquid) in the Data Table. Then subtract the mass of the empty graduated cylinder from the mass of the cylinder and sample of liquid. Record the mass of the sample of liquid on the Data Table in the appropriate location, e.g. Red Liquid, volume of 10.0 mL.Calculate the density of the liquid by dividing the mass by the volume (10 mL).Record the density on the Data Table in the appropriate location, i.e. Red Liquid; volume of 10.0 mL. Add another 10.0 mL to the cylinder. You should now have a total of 20.0 mL (10 mL + 10 mL).Determine the mass of the 20.0 mL by reading the electronic balance directly, or if using a triple- beam balance, record the total mass CL (cylinder + liquid) record in the Data Table. Then subtract the mass of the empty graduated cylinder (CE) from the mass of the cylinder and sample of liquid (CL). Record the mass of the sample of .liquid on the Data TableFind the density again by dividing the mass by 20.0 mL and record it on the Data Table.Keep adding 10.0 mL of the red liquid, recording the mass and calculating the density by dividing the mass by the amount of liquid in the cylinder until a total of 50.0 mL of the red liquid has been used.Repeat the procedure for each of the other liquids, finding mass and density.Graph mass (y-axis) vs. volume (x-axis) for each liquid on the graph paper provided. Use a different color for each of the liquid solutions.Draw a line of “best-fit” for the points of each solution.Data AnalysisData Table for Red LiquidVolume (mL)Mass of Empty Cylinder CE(g)Mass of Cylinder and Sample of Liquid CL(g)Mass of Sample of Liquid CL- CE (g)Density (g/mL)10.020.030.040.050.0Data Table for Blue LiquidVolume (mL)Mass of Empty Cylinder CE(g)Mass of Cylinder and Sample of Liquid CL(g)Mass of Sample of Liquid CL- CE (g)Density (g/mL)10.020.030.040.050.0Data Table for Green LiquidVolume (mL)Mass of Empty Cylinder CE(g)Mass of Cylinder and Sample of Liquid CL(g)Mass of Sample of Liquid CL- CE (g)Density (g/mL)10.020.030.040.050.0Analysis Questions:Which variable, mass or volume, is considered the test variable (independent variable) in this experiment?Which variable, mass or volume is considered the outcome variable (dependent variable) in this experiment?As the volume increases, what happens to the mass of each sample?Compare your density calculations for the red liquid. Should the density be the same in each instance? Explain your answer. Will this also be true for the blue and green liquids?Analyze your data and determine which liquid is most dense and which one is least dense. Focusing on the mass and volume of each liquid. Identify what the relationship is between mass and volume in terms of density.Predict what would happen to the liquids, if you carefully poured each liquid into a clear container. Write an explanation which differentiates the difference between each liquid of how and why they layered that way including the relationship of density to the location of each liquid. In terms of density, differentiate between an object which floats in water and an object which sinks in water Density of plain water is 1g/ml. What is the volume of a sample of water if the mass is 6.7g? Explain why this is so easy to figure out.Show how one would set up a ratio to determine the mass of a substance with a density of 5.6g/mL and a volume of 3.7 mL. Then determine the mass.Show how one would set up a ratio to determine the volume of a substance with a density of 2.6 g/mL and a mass of 5.5?g. Then determine the volume.Based on the results of this lab, design an experiment demonstrating how unknown substances can be distinguished from one another by using their densities.Home Learning:Students will complete the Analysis Questions.Extensions:Have students explore the density of objects with identical volumes, but different masses (use density cubes). Discover the relationship among mass, volume, and density.Have students explore the density of different liquids and/or solutions, e.g. 5%, 10%, 15% saltwater solution. Discover the relationship between density and the solute concentration.Literature Connection:“Archimedes and the King’s Crown”0outside00An ancient story tells about a Greek king, a gold crown and an amazing scientist named Archimedes. The king had ordered a solid golden crown made. When the court goldsmiths presented it to him, he asked Archimedes to test it to make sure it was pure gold. Archimedes knew that pure gold was very soft. He could bite a piece of it, and his teeth would leave a dent in it. (But he also knew that the king would be mad if he returned a dented crown. He couldn't use THAT test.) Archimedes also knew that if he took equal volumes of gold and water, the gold would weigh 23 times more than the water. He COULD use this test. (The problem was measuring the volume of the crown, an irregular object.).One night, while filling his tub, for a bath, Archimedes accidentally filled it to the very top. As he stepped into it, water spilled out over the top. The idea struck him, that if he collected the water, and measured it, he would know the volume of his body. HE COULD USE THIS TO MEASURE THE CROWN! In other words, the amount of displaced water in the bathtub was the same amount as the volume of his body.Archimedes was so excited that he jumped out of the tub. He ran outside and down the street yelling "Eureka! Eureka! (One of the few Greek words I know!) I found the answer!" .uk/.../Chemistry/ StructBond/c00195b.htmlAll this was fine except in his excitement, Archimedes had forgotten to put on his clothes. 36080707239000He was running down the street naked! Archimedes was able to get the volume of the crown and an equal volume of pure gold obtained, no doubt, from the King’s treasury. When he placed the two items into separate pans on a two-pan balance, well, I guess you can figure out the answer if I tell you that the goldsmith was put into jail!DIFFERENTIATED INSTRUCTION: OPEN INQUIRYmass, volume, densityObjectives/Purpose: Determine the physical properties of liquids.Demonstrate that regardless of the size of a sample, the density of a substance will always remain the same.Classify and compare substances on the basis of characteristic physical properties that can be demonstrated or measuredDemonstrate Achievement of the following Goals:Develop a problem statement based on the density of liquids that you would like to investigate.State your hypothesis.Design an experiment to test your hypothesis.Carry out the experiment you designed.Submit a completed lab report to your teacher.Use the “Claim, Evidence & Reasoning” rubric to defend your claims when writing your conclusion.Precipitating Bubbles5162550-60007500Review of the Scientific MethodFlorida Next Generation Sunshine State Standards Benchmark(s): SC.8.N.1.1 Define a problem from the eighth grade curriculum using appropriate reference materials to support scientific understanding, plan and carry out scientific investigations of various types, such as systematic observations or experiments, identify variables, collect and organize data, interpret data in charts, tables, and graphics, analyze information, make predictions, and defend conclusions. (AA)SC.8.P.8.5 Recognize that there are a finite number of elements and that their atoms combine in a multitude of ways to produce compounds that make up all of the living and nonliving things that we encounter. (AA) (Also assesses SC.8.P.8.1, SC.8.P.8.6, SC.8.P.8.7, SC.8.P.8.8, and SC.8.P.8.9.)SC.8.P.9.2 Differentiate between physical changes and chemical changes. (AA) (Also assesses SC.8.P.9.1 and SC.8.P.9.3.)Background Information: (Reprinted from The Brain in Space: A Teacher’s Guide with Activities for Neuroscience, NASA, URL: ) Scientists aim to gain knowledge and reach an understanding of the world around them. To achieve this goal, scientists must be curious, make observations, ask questions, and try to solve problems. Early scientists tended to draw conclusions from observations that were largely speculative (e.g., that the Earth was flat or that the Sun circled the Earth). By the mid-sixteenth century, some scientists began to realize that using a systematic approach to obtaining information and solving problems could obtain far more knowledge. This resulted in a process which we call the Scientific Method.Steps of a Scientific Method involving an experimental designIdentify the problem.Collect information about the problem.Propose a hypothesis.Test the hypothesis by conducting experiments, making comparative observations, and collecting data.Evaluate the data collected through investigation.Draw conclusions based on data and determine whether to accept or reject the municate results and ask new questions.The problem is a statement of the question to be investigated. Observations and curiosity help to define exactly what problem should be investigated and what question(s) answered. Once a problem is defined, a scientist should collect as much information as possible about it by searching journals, books, and electronic information sources. This information will provide a basis for forming the hypothesis.A hypothesis is often considered to be an “educated guess.” The word “guess” is inappropriate, however, because a hypothesis should be based on information gathered. A hypothesis can be defined more accurately as a “proposed” answer to the problem, based upon background information either gathered through research or through experience. The hypothesis is then tested through experimentation and observation. The results of experimentation provide evidence that may or may not support the hypothesis.To be effective, experiments must be properly planned. The plan is called the procedure, which describes the things that actually will be done to perform the investigation. This is where decisions are made about which variables will be tested and which will be kept constant, what to use as a control, how many samples to use, how large the sample sizes should be, safety precautions needed, and how many times to run the experiment.Many scientists investigate questions that cannot be answered directly through controlled experiments in laboratories. For example, scientists studying global warming, the AIDS epidemic, and losses of biodiversity must use comparative methods to examine differences that occur in the natural world.When developing the procedure for an experiment, consider the following:1. Test only one variable at a time.A scientist wanting to find out “why trees shed their leaves in the fall” would have to consider the factors that affect trees, such as the type of tree, the amount of water they receive, the temperature, the length of daylight to which they are exposed, and the type of soil in which they are growing. These are the variables which can cause changes to occur in an experiment.To obtain reliable results, only one variable should be tested at a time. All others should be kept constant, whenever possible. If the scientist’s hypothesis states that shorter daylight hours cause trees to shed their leaves in the fall, trees of the same age should be tested. They should be placed in the same size pots with the same type of soil, given the same amount of water, and kept at the same temperature. The only thing changed should be the number of hours of light to which different groups of trees are exposed. Any variable that the experimenter chooses to change, such as the hours exposed to light, is referred to as the test variable (independent variable). The change in the experiment that happens as a result of the test variable, such as the length of time that it takes for the leaves to fall, is referred to as the outcome variable (dependent variable).2. Use controls.The control is used for comparing the changes that occur when the variables are tested. If a number of young oak trees are placed in a greenhouse and exposed to 10 hours of light to simulate fall conditions, how will the scientist know if a loss of leaves is due to the amount of light? It could be due to the temperature that he/she chose or the amount of carbon dioxide in the air. To avoid such uncertainty, two identical experiments must be set up: one in which the trees are exposed to 10 hours of light and the other, the control, in which they are exposed to light for a longer period of time to simulate summer conditions. All factors for the control are exactly the same as for the test except for the variable being tested—the amount of light given to each tree.3. Use several samples.485775040640000Using a number of samples prevents errors due to differences among individuals being tested. Some trees are heartier than others. If only a few trees are tested, some may lose leaves for reasons that are not related to the amount of light. This will produce misleading results. Larger numbers of samples will provide more accurate results.4. Always use appropriate safety measures.Safety measures to be followed vary according to the type of experiment being performed. For example, laboratory-based experiments frequently require that participants wear protective clothing and safety goggles and that dangerous volatile chemicals be used only under a vented fume hood.5. Repeat the experiment several times.To make valid conclusions, the scientist must have reproducible results. Ideally, comparable results should be obtained every time the experiment is run.After the plan or procedure is complete, the experiment is run. It is essential that careful and accurate records be kept of all observations during an experiment. The recorded observations and the measurement comprise the data. It is always useful to present data in the form of charts, tables, or graphs, as these provide a visual way to analyze and interpret the results. When drawing graphs, the test variable (independent variable) is conventionally plotted on the horizontal axis, and the outcome variable (dependent variable) is plotted on the vertical axis. Analysis of data from the experiment allows the scientist to reach a conclusion. The scientist determines whether or not the data support the hypothesis and decides whether to accept or reject the hypothesis.The conclusion should provide an answer to the question asked in the problem. Even if the hypothesis is rejected, much information has been gained by performing the experiment. This information can be used to help develop a new hypothesis if the results repeatedly show that the original hypothesis is inappropriate. After performing many investigations on a particular problem over a period of time, a scientist may come up with an explanation for the problem, based on all the observations and conclusions made. This is called a theory.A Scientific Theory is an explanation, supported by data, of how or why some event took place in nature.MAJOR CONCEPTS for the TeacherOur exhaled breath contains carbon dioxide gas.The carbon dioxide we exhale reacts with calcium hydroxide in solution to form insoluble calcium carbonate and water.*Formation of calcium carbonate precipitate can be used as a test for the presence of carbon dioxide.If carbon dioxide continues to be bubbled into limewater (calcium hydroxide solution) after a period of time, the white precipitate disappears. The excess carbon dioxide forms carbonic acid in the water and the calcium carbonate reacts with the carbonic acid to form calcium ions and bicarbonate ions, which are soluble in water. **373888011112500Ca(OH)2 = calcium hydroxideCO2 = carbon dioxideCaCO3 = calcium carbonateH2O = waterH2CO3 = carbonic acid gasCa++ = calcium ionHCO3+ = bicarbonate ionChemical Equations* Ca(OH)2 + CO2 CaCO3 + H2O ** CO2 + H2O + H2CO3CaCO3 + H2CO3Ca++ 2HCO3+This activity demonstrates the presence of carbon dioxide in exhaled air. In Activity 1, the teacher will blow through a straw into a solution of calcium hydroxide. The carbon dioxide in the exhaled air will combine with the calcium hydroxide to produce a white precipitate of calcium carbonate. In Part 2, students will attempt to reproduce the experiment. They will not be able to do so because they will only have water as their unknown liquid. They should conclude that the teacher had a liquid other than plain water, resulting in a chemical reaction that changed one or more substances in the teacher’s original solution.The second part of this activity involves designing an experiment to test the hypotheses determined in the class discussion. It may be handled in different ways depending on the age of the students.381444516764000Time Frame30 minute teacher preparation60 minutes / student activityMATERIALS 5 grams calcium hydroxide powderOne liter of waterFilter paperFilter funnelFlasks or small bottles3686175-508000Straws25 mL or 50 mL graduated cylinder125 mL Erlenmeyer flasksTest–tube rackAluminum foilStop watchHot PlateGogglesProcedure:Part 1: Lab PrepThe preparation of one liter of limewater(Should be prepared a day ahead of time): Teacher preparationAdd 10 grams calcium hydroxide Ca(OH)2 powder to 500 mL of water.Cover and shake well. Calcium hydroxide is only slightly soluble in water and 5 grams will provide more solid than will dissolve.Allow the suspension formed to settle for a few minutes.To separate the limewater from the suspension, use the filter paper and filter–funnel apparatus to filter the suspension.If the limewater filtrate is still slightly cloudy, filter for a second time, using a new filter paper.Keep the limewater tightly closed when not in use, as it will react with carbon dioxide from the air and become cloudy.The calcium hydroxide and water suspension can be stored in a large bottle, and the limewater filtered off when needed.The filtered limewater can be stored in smaller bottles or flasks, 250 mL in volume, for use in class. EngagePart 1: Read the following background informationBACKGROUND Carbon dioxide comprises only 0.033 percent of Earth’s atmosphere, yet it is the principle inorganic source of carbon for living organisms. Carbon dioxide and water are the raw materials required by plants for the synthesis of sugars through photosynthesis. Organisms release carbon dioxide back into the atmosphere as a waste product of respiration and other cellular processes.Say to students: It is important for scientists to make careful observations, and you will practice doing the same in this activity. Keep a record of all of your observations.Everyone must wear safety goggles.Fill a 125 mL Erlenmeyer flask with 15 mL of teacher liquid (filtered limewater solution).Students record observations in notebook.Teacher will use a straw to bubble his/her breath into the liquid slowly for no more than 2 minutes. DO NOT blow vigorously as you do not want to spill the liquid! Be very careful not to allow any liquid to enter the mouth or eyes. Goggles are a must!Organize students into cooperative lab groups of 3 – 4 members. Assign each member a role (see Group Roles in the front of the packet).Data Analysis: Teacher Directed Part 1Have group members discuss the following questions and place their answers on sticky notes. Have one member of the group place their answers on the poster paper (one question/poster paper) provided by the teacher. Have another member read the group answers when called upon.Questions for groups to answer:What gases are present in exhaled air? Carbon dioxide gas (nitrogen, water vapor, and small amounts of oxygen are also present.)What is the clear liquid? Limewater (calcium hydroxide)Why did a precipitate form? Why did the solution turn cloudy? There must have been a chemical reactionIf a chemical reaction took place, what two ingredients do you think reacted? The limewater and the carbon dioxideHow can we test for the presence of carbon dioxide? Bubble the gas into the clear limewater. What is a positive test for carbon dioxide? Limewater is a solution of calcium hydroxide. It chemically reacts with carbon dioxide to form solid calcium carbonate (chalk).The responses from all groups will be discussed in class to ensure that all students understand the experiment.Data Analysis: Teacher Directed Part 2Students will repeat the procedures demonstrated by the teacher.Each student group is to measure 15 mL of student liquid (water) into a 125 mL Erlenmeyer flask, and record their observations in lab notebooks.Using a straw, the assigned member of each group will bubble his/her breath into the liquid slowly for no more than 2 minutes. DO NOT blow vigorously to avoid spilling the liquid!Observe the contents after blowing through the straws for approximately 1 – 2 minutes. 460057512636500Record observations in lab notebook. These observations will be recorded as data.When the teacher is convinced that class knows exactly what happened, he/she will say to the class, “Your teacher did the exact same experiment but got very different results!” His/her test tube has white precipitate. The class now has a problem to solve: How can there be no white precipitate when the teacher performed the same experiment?Groups will discuss what factors might affect the production of the precipitate (cloudy solution which will settle into a white solid and clear liquid in time).Have groups propose a factor that might have affected the results.Possible answers might be: Time—how long exhaled air was bubbled into the solution.Adults vs. teenagersRate of bubblingLight vs. darkTemperature of the liquideither hotter or colderDifferent substanceThe factors identified are known as variables.Each group will be assigned at least one of the variables to test.Use the following questions to guide the groups in the development of their group hypotheses and experimental design:? Does the hypothesis offer an answer to the problem?Yes, it does. The problem was, “Why was there a white precipitate when the teacher performed the experiment?” The hypothesis states that the teacher may have (choose a variable).? Does the experiment have a control?Yes. The control is the average length of time that the students exhaled into the liquid (possibly about one minute).? Which materials are needed? Are the materials readily available?? What conditions are being kept constant?The conditions kept constant are the temperature of the liquid, the size of the straws, the rate of bubbling into the liquid and the amount of liquid used for each test (there may be human error here – may not blow at same rate consistently).? What is the test variable (independent variable) being tested? This is the variable that the experimenter chooses to change.? What is the outcome variable (dependent variable) being measured? The outcome variable (dependent variable) is the presence or absence of precipitate present after exhaling into the container.? How will each group present its data? Presentation format will varyEach group must submit to the teacher prior to any experimentationa proposed hypothesis; a draft procedure (which may be modified as students work through the experiment); a draft data tableProcedure: Part 3 Groups will be provided with the needed materials to perform their experiments, collect data, and draw conclusions.Each group must turn in a completed Laboratory Report.A post-experiment class discussion may be conducted to review the conclusions made by each group. Compare the experiments performed by each group of students. For each experiment designed, discuss the variable tested, the control, the factors kept constant (controlled variables), and the results obtained. Note that the amount of limewater used and the size of the straws and flasks should be the same for each experiment. A chart, such as the one below, can be developed on an overhead projector.Add any other variables tested to the chart as necessary.From the class observations, it can be concluded that only the length of time affects the amount of precipitate formed. However, results have also varied based upon how vigorous the blowing was, i.e. amount of carbon dioxide introduced.At this point, explain that excess carbon dioxide bubbled into limewater forms carbonic acid, which dissolves the precipitate of calcium carbonate. Place balanced chemical equation on the board.The use of a Scientific Method, specifically an experimental design to systematically test different hypotheses will enable the students to determine which hypothesis is correct in answering a problem.Evaluation:You will be evaluated according to the amount of effort expanded, your specific job performance, your participation within the team, and on the final product—the laboratory write-up. Your group’s experiment should be evaluated based on the appropriateness of the design you initiated to test the group’s hypothesis (not whether the group actually found the “correct” solution.Students will be asked to test the hypothesis that “the length of time that air was blown into the solution” caused the teacher’s results to be different. Each student in a group of four will use the same size tube and the same amount of lime water, run the experiment at the same temperature, use the same size straws, and attempt to bubble at the same rate. Students should estimate how long they exhaled into their liquid the first day. This could be the control time. One student in each group will blow into his/her tube for the control time. Each of the remaining students in the group should increase the control time by two to four minutes.Explain why there was no change in the student liquid when carbon dioxide was exhaled into the liquid.Home Learning:Work on designing and writing-up an experimental design for completion of Part 2.Work on the completion of the laboratory write-up which may include data analysis, graphing, and drawing conclusions after completion of Part 3.40252654381500Discussion and provide examples of chemical changes where new substances are formed as a result of atoms combining – some students may discuss that this is a result of electron bonds forming.Extensions:Have each group perform four more different experiments, to test several variables.Do not share the final chemical equation with students. Additionally, challenge them to find the correct reaction mechanism.Name: ____________________________________________ Period: _________ Date: ________Precipitating Bubbles54070251270000Florida Next Generation Sunshine State Standards Benchmark(s): SC.8.N.1.1: Scientific Investigations SC.8.P.8.5: Combining Atoms SC.8.P.9.2: Chemical and Physical ChangesBACKGROUND Carbon dioxide comprises only 0.033 percent of Earth’s atmosphere, yet it is the principle inorganic source of carbon for living organisms. Carbon dioxide and water are the raw materials required by plants for the synthesis of sugars through photosynthesis. Organisms release carbon dioxide back into the atmosphere as a waste product of respiration and other cellular processes.Part 1: Teacher DemonstrationObservations: What did you observe in the teacher demonstration?Questions:What gases are present in exhaled air? What was the clear liquid in the initial demonstration? Why did a precipitate form? Why did the solution turn cloudy? If a chemical reaction took place, what two ingredients do you think reacted? How can we test for the presence of carbon dioxide? What is a positive test for carbon dioxide? Part 2: Repeat the procedures demonstrated by the teacher.479615515557500Procedures: Each student group is to measure 15 mL of student liquid (water) into a 125 mL Erlenmeyer flask, and record their observations in lab notebooks.Using a straw, the assigned member of each group will bubble his/her breath into the liquid slowly for no more than 2 minutes. DO NOT blow vigorously to avoid spilling the liquid!Observe the contents after blowing through the straws for approximately 1 – 2 minutes. Record observations in lab notebook. These observations will be recorded as data.Observations:Questions:Was there a problem with the results? Explain.How can there be no white precipitate when the teacher performed the same experiment?What factors might affect the production of the precipitate (cloudy solution which will settle into a white solid and clear liquid in time)?** The factors identified are known as variables. Each group will be assigned at least one of the variables to test. **Group Variable: __________________________________________________________________________Part 3: Design an Experiment to Test Your VariableProblem Statement:The question you want to answerHypothesis: “If (this is changed) then (this will happen) because...”Test Variable: Factor being testedOutcome Variable:Factor being measuredControl Group:Used as a comparisonConstant Conditions:Purposefully kept the sameMaterials Needed:Procedures:Specific steps you will take to test the hypothesis. Be Specific!Data: Observations, Charts, Tables, and/or GraphsConclusion:Claim:Make a CLAIM based on what you observed in the experiment you performed todayEvidence:Support your claim using EVIDENCE you collected in your experiment.Reasoning:Use science concepts to provide REASONING for why the evidence you presented supports your claim.DIFFERENTIATED INSTRUCTION: OPEN INQUIRYPrecipitating BubblesObjectives/Purpose: Demonstrate that organisms release carbon dioxide back into the atmosphere as a waste product of respiration and other cellular processes.Design an investigation based on observationsUnderstand that accurate record keeping, openness, and replication are essential to maintaining an investigator's credibility with other scientists and society.Demonstrate Achievement of the following Goals:After completing the “Precipitating Bubbles Essential Lab”, develop a problem statement based on an unanswered question you have that you would like to investigate.State your hypothesis.Design an experiment to test your hypothesis.Carry out the experiment you designed.Submit a completed lab report to your teacher.Use the “Claim, Evidence & Reasoning” rubric to defend your claims when writing your conclusion.Greenhouse GASES IN A BOTTLENext Generation Sunshine State Standard Benchmark: SC.8.L.18.3 Construct a scientific model of the carbon cycle to show how matter and energy are continuously transferred within and between organisms and their physical environment. SC.8.L.18.4 Cite evidence that living systems follow the Laws of Conservation of Mass and Energy. (AA)Background Information for the teacher:Particles suspended in our atmosphere (aerosols) can absorb more sunlight or they can reflect the Sun's energy back into space. The Earth's temperature would be much colder without the CO2 in our atmosphere we have naturally. When we add more, the Earth warms up. The effects of atmospheric CO2 and aerosols on our planet's temperature are measurable with simple tools anyone can use. Greenhouse gases are carbon dioxide, methane, nitrous oxide, ozone (in the lower atmosphere), water vapor and CFCs. One greenhouse gas that has been increasing in the past 50 years is carbon dioxide. Loss of rainforests that take in carbon dioxide and the burning of fossil fuels by cars, factories and plants that releases carbon dioxide is part of the causes.CLAIM-EVIDENCE-REASONING-A persistent question with regard to the greenhouse effect is, "Why does the light energy from the Sun pass through the greenhouse gases in the layers of the atmosphere but are trapped once the infrared light returns to space after reflected off Earth?”547878011493500Materials:FunnelFilter paper for measuring baking sodaGraduated CylinderTimer/StopwatchFour: 500 mL clear water bottles with the label removedIdentical thermometers for each soda bottle Duct tape Source of carbon dioxide (CO2)-vinegar and baking sodaModeling clayMeasuring spoonsBalloons125 mL Erlenmeyer Flask500 mL of room temperature waterOptional Heat LampsTriple-Beam BalanceEngage:Read or write on the board "Why does the light energy from the Sun pass through the greenhouse gases unhindered and the infrared energy radiated from the Earth is absorbed?"Explain how a greenhouse is able to maintain a temperature at which plants are able to grow even though the temperature outside the greenhouse sometimes will not support plant life. Relate a greenhouse to how the Earth’s atmosphere traps heat. Identify the gases in the atmosphere that “act” like the glass in a greenhouse.Optional: Studyjams-Carbon Cycle, BBC-Carbon CycleExplore: Teacher Preparation:Drill the caps of the bottles to the same diameter as your thermometer. Place the thermometers through the holes in the caps several inches. Use the modeling clay to hold the thermometers in place and seal the hole. Number bottles #1, #2, #3, and #4.Name:___________________________________________ Period: _______Date: ____________ Procedure:For your source of carbon dioxide, use the following methods quickly to ensure CO2 is captured:Bottles #1 and #2 - Carefully mix 10 grams of baking soda and 50 mL vinegar in a flask. Cover with balloon to capture the CO2. Add 50 mL water to bottle #1. Release the CO2 into bottle #1 and cover with cap quickly. Repeat the procedure for the bottle #2. Bottles #3 and #4 – Pour10 grams of baking soda into each bottle. Now add 50 mL of water to each bottle.Place the caps with thermometers onto the tops of the bottles. Place bottles in sunlight. Make sure they receive the same amount of sun. NOTE: a heat lamp may be substituted for the sun, but you must be very careful to place the bottles exactly the same distance from the lamp. Shade the thermometers by putting a strip of opaque tape on the outside of the bottles. The tape must be the same length on all bottles. Measure the temperature of the bottles over time. Record the temperature of each bottle every five minutes for a half hourData TableDryWetElapsed Time in minutesBottle 1Bottle 2Bottle 3Bottle 4Initial51015202530 Explain:ConclusionInterpret the graph and identify a trend for the change in temperature for each container during the experiment? Did both jars show the same change in temperature? Calculate the change in temperature for each jar.Did your results support your hypothesis?Explain why the temperature of the covered jar showed an increase in temperature. What part of this setup contributed to the increase in temperature?Explain how the covered jar setup represents an experimental model of the influences of the greenhouse effect on the temperature of the Earth’s atmosphere. Identify what the light bulb and plastic wrap represent in this experimental model.Identify the tested (independent), outcome (dependent) and controlled (constant) variables in this experiment.In this experiment we only tested each setup one time (20 minute interval); explain why this will affect the validity of the data. How can we change this experiment so the data will be more valid?Based on what you learned in this activity, can you connect this knowledge to the environmental issue of the dangers of the greenhouse effect? Explain Think about what humans do that increases the amount of greenhouse gases released into the atmosphere and develop a list of ways that we can reduce the level of these gases.Elaborate:Claim:Make a CLAIM based on what you observed in the experiment you performed today.Evidence:Support your claim using EVIDENCE you collected in your experiment.Reasoning:Use science concepts to provide REASONING for why the evidence you presented supports your claim.Optional Extensions:Activity # 1. Students may want to continue the experiment and record the two temperatures every day at the same time for a week. Graph the data and discuss how the temperatures fluctuate from day to day.Activity # 2. Green House Gases. There is no scientific dispute about the presence of "greenhouse gases" (including carbon dioxide--CO2) in the Earth’s atmosphere that function to trap heat from the Sun. There is also no dispute that the amount of CO2 in the atmosphere has increased 25%. Does this mean that global warming is occurring? Nobody knows for certain, but many atmospheric scientists are becoming concerned about the increasing amount of CO2 in the atmosphere. What does this mean to you? Despite the uncertainties, if global warming does occur (or if it has already begun), it will profoundly affect human societies. Global warming may result in severe droughts, reducing crop production necessary to feed billions of people. Rising sea levels will threaten beaches, coastal cities, and people. The migration of millions of people would strain economic, health, and social services. Conflicts over remaining resources could escalate. Wildlife habitat will be destroyed, with countless species facing extinction. With the potential devastating effects of global warming, it is reasonable and prudent to examine alternatives to fossil fuels to decrease the amount of CO2 in the atmosphere. The transportation sector is one area that can, generally speaking, use alternative methods of fuel, since there are already a variety of alternate fuels available. The good news is that this transition can be done relatively easily, cheaply, and painlessly.STUDENT HANDOUTDIFFERENTIATED INSTRUCTION: OPEN INQUIRYModeling the Greenhouse EffectObjectives/Purpose: In this investigation students will: Create models of Earth to demonstrate the greenhouse effect.Relate a greenhouse to how the Earth’s atmosphere traps heat. Identify the gases in the atmosphere that “act” like the glass in a greenhouse. Demonstrate Achievement of the following Goals:Develop a problem statement based on the concept of the “greenhouse effect” that you would like to investigate.Create a model to demonstrate the concept of the “greenhouse effect” that you would like to investigate.How does the model demonstrate the concept that you investigated?Remember to use the “Claim, Evidence & Reasoning” rubric to defend your claims.CONSERVATION OF MASSFlorida Next Generation Sunshine State Standards Benchmark(s): SC.8.L. 18.4: Cite evidence that living systems follow the Laws of Conservation of Mass and Energy. (AA)SC.8.P.8.5 Recognize that there are a finite number of elements and that their atoms combine in a multitude of ways to produce compounds that make up all of the living and nonliving things that we encounter. (AA) (Also assesses SC.8.P.8.1, SC.8.P.8.6, SC.8.P.8.7, SC.8.P.8.8, and SC.8.P.8.9.)SC.8.P.9.2 Differentiate between physical changes and chemical changes. (AA) (Also assesses SC.8.P.9.1 and SC.8.P.9.3.)Background information:Matter and Energy TransformationsThe “Law of Conservation of Mass” states that when matter goes through a physical or chemical change, the amount of matter stays the same before and after the changes occur. In other words, matter cannot be created or destroyed. 39528759080500Engage:Teacher burns a small piece of paper inside of a beaker. Teacher asks students: “What happened to the paper?; Is there the same amount of matter in the beaker before and after?; Where did the matter go?; How can you tell?; What type of change did you observe: physical or chemical?”.Materials:Graduated CylinderErlenmeyer FlaskBalloonBaking SodaTriple Beam BalanceSpoonName: _____________________________________________ Period: _____ Date: _________Procedure - Part 1: 1. Using your graduated cylinder, measure 50 mL of vinegar. 2. Add the vinegar to your 125 mL Erlenmeyer flask. 3. Stretch your balloon out for about a minute so that it will inflate easily. 4. Using the white plastic spoon, add 10 grams of baking soda to your balloon. Use the paper funnel to avoid spilling. 5. While keeping all the baking soda in the balloon, carefully place the mouth of the balloon over the opening of the Erlenmeyer flask to make a tight seal. The balloon will hang to the side of the flask. Record/draw observations. 6. Using your Triple Beam Balance (TBB), find the mass of the closed system. (Flask, vinegar, balloon, and baking soda) Record the mass in the data table. 7. With the balloon still attached to the flask, firmly hold where the balloon is attached to the flask and lift the balloon so that the baking soda falls into the flask and combines with the vinegar. Swirl gently. 8. Record/draw all observations. Observations: (diagram your observations)BeforeAfterMass of System Start (g) Mass of System End (g) Mass of System Gas Released (g) Procedure - Part 2: 1. Using your TBB, find the mass of the closed system once the chemical reaction has completed. Be sure to keep balloon attached. 2. Record the info into the data table below. 3. Carefully remove the balloon and let all the gases escape. 4. Place the deflated balloon back onto the Erlenmeyer flask. 5. Find the mass again using your TBB. 6. Record your info into the data table above. Explain:Look at the chemical equation below: *NaHCO3 + CH3COOH → NaOOCCH3 + H20 + CO2 Baking + Vinegar → Sodium + Water + Carbon Soda Acetate Dioxide Name the reactants:_______________________________________________________Name the products:_______________________________________________________Name the gas produced:___________________________________________________Compare the mass of the closed system before and after the reaction. Explain your results.Were any new elements introduced into the closed system? Where did the gas come from? Explain.What evidence did you observe to indicate that a chemical reaction took place?After the gas was released, what happened to the mass of the system and why?Did your results support this statement? Why/Why Not?Conclusion Claim:Make a CLAIM based on what you observed in the experiment you performed today. Evidence:Support your claim using EVIDENCE you collected in your experiment. Reasoning:Use science concepts to provide REASONING for why the evidence you presented supports your claim.Answer Key:Name the reactants: Baking Soda and VinegarName the products: Sodium Acetate, Water, and Carbon DioxideName the gas produced: Carbon DioxideCompare the mass of the closed system before and after the reaction. Explain your results. (The mass of the closed system before and after the reaction were the same because matter cannot be create nor destroyedWere any new elements introduced into the closed system? Where did the gas come from? Explain. NO. The law of conservation of mass states that in any chemical reaction, matter is neither created nor destroyed. Therefore, in a balanced chemical equation you must have the same number of atoms of each element on either side of the equation. The gas came from the baking soda and vinegar What evidence did you observe to indicate that a chemical reaction took place? (Bubbles indicated that a chemical reaction took place, also a new substance was form and gas was given off which inflated the balloon)After the gas was released, what happened to the mass of the system and why? (The mass of the system decreased because the system was no longer closed. Some matter escaped (the gas) which caused the mass to decreased Did your results support this statement? Why/Why Not? CARBON CYCLE STATION GAME(Adapted from Resources for Educators from the National Center for Atmospheric Research) Generation Sunshine State Standards Benchmark: SC.8.L.18.3 Construct a scientific model of the carbon cycle to show how matter and energy are continuously transferred within and between organisms and their physical environment. SC.8.N.1.5 Analyze the methods used to develop a scientific explanation as seen in different fields of science. Background Information for the teacher: The movement of carbon through various aspects of the natural environment is the focus of much scientific research. Global warming and climate change can be attributed to the increased amount of heat-trapping gases, such as carbon dioxide. Students must develop an understanding of how carbon moves through the environment in order to appreciate the complexity of developing solutions to address problems associated with climate change. In addition, since anthropogenic influences impact how much carbon is reintroduced to the active carbon cycle, students should recognize that human actions negatively affect the environment.Materials:491490083185007 Dice7 Station Signs7 Station Movement Directions Carbon Cycle Passport for Each StudentCarbon Atom Model for Each StudentBlank Bar Graph for Each StudentEngage: Dirt for LunchHave students list everything they are having or had for lunch.Ask students if they can name a food in their lunch that did not come from dirt? Mention that no matter what you will eat or have eaten for lunch, ultimately they are eating dirt!514350012319000Have students create a concept map to attempt to figure out the ingredients in different foods and, as a group, trace each food’s origin back to the Earth.Use a tuna fish sandwich for an example.The bread came from wheat grown in the dirt.Pickles are preserved cucumbers grown in the dirt.Lettuce was grown in the dirt.Mayonnaise came from eggs, which came from chickens that ate grains grown in the dirt.Tuna living in the ocean eat smaller fish that eat zooplankton that eat phytoplankton, which need nutrients from the decomposed bodies of dead plants and animals accumulated on the ocean floor and brought to the surface by currents.Optional: As a group create a poster using an appropriate graphic organizer explaining “I Eat Dirt…Ask Me How”. Drawings, magazine cutouts, or computer graphics should be incorporated into the poster.Optional: Studyjams-Carbon Cycle, TED Ed-Carbon Cycle, BBC-Carbon CycleExplore: Teacher Preparation:Print and laminate station signs for durability. Place signs outside next to real life examples. For example place “plant” station by flowers, plants or grass. Place “soil” station on the ground, etc. Place one die at each station. Activity:Tell students that they are going to be carbon atoms moving through the carbon cycle.Using the carbon atom model, have students draw in the protons, neutrons and electrons.Students then wear the carbon atom model as they travel the Carbon Cycle.Categorize the places carbon can be found into these stations: Atmosphere, Plants, Animals, Soil, Ocean, Deep Ocean, and Fossil Fuels. Point out the areas outside or in the room that are labeled with each station and contain the directions for movement from that station.Assign students to each station randomly and evenly. Have students identify the different places carbon could go from that given station. Discuss the processes that allow for the transfer of carbon between stations. Students should make a line and roll the die individually to follow the directions for movement from (or retention at) each station. Remind them that they are representing atoms of carbon moving through the carbon cycle and that they should record their movements on the data sheet.Students will realize the routine movements (or non-movements) in the carbon cycle. Once the carbon atoms (students) have had a chance to roll the die ten times, have each student create a bar graph using the data they collected. The bar graph should represent the number of times the carbon atom (student) was at each station.Using graph paper, create a large bar graph recording the number of carbon atoms (students) at each station.Name: __________________________________________Period: _______ Date: ________TRAVEL THE CARBON CYCLETrip 1: Where I’m goingHow I’m getting there:Trip 2: Where I’m goingHow I’m getting there:Trip 3: Where I’m goingHow I’m getting there:Trip 4: Where I’m goingHow I’m getting there:Trip 5: Where I’m goingHow I’m getting there:-3479165-388620Start Location: ________________________020000Start Location: ________________________Trip 6: Where I’m goingHow I’m getting there:Trip 7: Where I’m goingHow I’m getting there:Trip 8: Where I’m goingHow I’m getting there:Trip 9: Where I’m goingHow I’m getting there:Trip 10: Where I’m goingHow I’m getting there:14871703556000-4806959207500148717012446000147764511811000-143224149848Title:00Title:14776451308100014681201060450014871709969500147764510287000333375110617000CARBON ATOM MODEL151447514763750075247582867500219075021145500029381452333625Nucleus 020000Nucleus The Carbon CycleTHE ATMOSPHEREYou are currently a molecule of carbon dioxide in the atmosphere.If you roll…Then you …1Stay in the atmosphere. Much of the carbon dioxide in the atmosphere moves through the atmosphere.284582018859500Go to plant. You are used by a plant in photosynthesis. 3Stay in the atmosphere. Much of the carbon dioxide in the atmosphere moves through the atmosphere. 4Stay in the atmosphere. Much of the carbon dioxide in the atmosphere circulates through the atmosphere.5Go to surface ocean. 6Go to plant. You are used by a plant in photosynthesis. The Carbon CyclePLANTSBIOSPHEREYou are currently a carbon molecule in the structure of the plant. If you roll…Then you …1164592018986500Go to soil. The tree shed its leaves.2Stay in plant. You are a carbon molecule in the tree’s trunk.3324612023050500Go to animal. The leaves and berries that the plant produced contain your carbon molecule and were eaten. 4Stay in plant. You are a carbon molecule in the tree’s roots.5Stay in plant. You are a carbon molecule in the tree’s branches.6Stay in plant. You are a carbon molecule in the tree’s trunk.The Carbon CycleANIMALSBIOSPHEREYou are currently a molecule of carbon in an animal. If you roll…Then you …1Stay in animal. The carbon molecule is stored as fat in the animal.2290322012636500Go to soil. The animal that consumed you died and your carbon molecule is returned to the soil. 3Go to atmosphere. The animal that consumed you respired (breathed) you out as carbon dioxide.434747203746500Stay in animal. You are eaten by a predator.5Go to atmosphere. The animal that consumed you respired (breathed) you out as carbon dioxide.6Go to atmosphere. The animal that consumed you respired (breathed) you out as carbon dioxide.The Carbon CycleSOILGEOSPHEREYou are currently a molecule of carbon dioxide in the soil. If you roll…Then you …1Stay in the soil. Much of the carbon in the soil is stored there. 2Go to plant. You are used by a plant in photosynthesis. 3Go to fossil fuels. Your carbon molecule has been in the soil 30175201016000so long it turns into fossil fuels. 4Go to the atmosphere. 5Stay in the soil. 6Go to fossil fuels. Your carbon molecule has been in the soil 3246120-889000so long that it turns into fossil fuels.The Carbon CycleSURFACE OCEANHYDROSPHEREYou are currently a molecule of carbon dioxide in the surface ocean. If you roll…Then you …1Go to deep ocean. 2Stay in the surface ocean. 3152400033718500Go to deep ocean. Your carbon atom was part of an ocean organism that has died and has sunk to the bottom of the ocean.4Stay in the surface ocean. 5Go to the atmosphere. 6Go to the atmosphere. The Carbon CycleDEEP OCEANHYDROSPHEREYou are currently a molecule of carbon in the deep ocean. If you roll…Then you …1Stay in the deep ocean. 2Stay in the deep ocean. 3Go to surface ocean. 4Go to surface ocean. 5Go to surface ocean. 6Go to animal. An organism in the water has taken you up as food in the deep ocean.The Carbon CycleFOSSIL FUELSGEOSPHEREFossil fuels are a rich source of energy that has been created from carbon that has been stored for many millions of years. If you roll…Then you …1Stay in the fossil fuels. 2Stay in the fossil fuels. 3Stay in the fossil fuels. 4Stay in the fossil fuels. 5Go to the atmosphere. Humans have pumped the fuel that you are part of out of the ground and have used it to power their cars. 6Go to the atmosphere. What is the Carbon Cycle?All living organisms are based on the carbon atom. Unique among the common elements of the Earth's surface, the carbon atom has the ability to form bonds with as many as four other atoms (including other carbon atoms) and to form double bonds to itself. Carbon compounds can be solid, liquid, or gas under conditions commonly found on the Earth's surface. Because of this, carbon can help form solid minerals (such as limestone), 'squishy' organisms (such as plants and animals), and can be dissolved in water or carried around the world through the atmosphere as carbon dioxide gas. The attributes of the remarkable carbon atom make possible the existence of all organic compounds essential to life on Earth.Carbon atoms continually move through living organisms, the oceans, the atmosphere, and the crust of the planet. This movement is known as the carbon cycle. The paths taken by carbon atoms through this cycle are extremely complex, and may take millions of years to come full circle.Modified with permission from Global Climates - Past, Present, and Future, S. Henderson, S. Holman, and L. Mortensen (Eds.). EPA Report No. EPA/600/R-93/126, U.S. Environmental Protection Agency, Office of Research and Development, Washington, DC. pp. 59 - 64.STUDENT HANDOUTDIFFERENTIATED INSTRUCTION: OPEN INQUIRYModeling Recycling of Matter and EnergyObjectives/Purpose: In this investigation students will: Construct a scientific model of the carbon cycle Show how matter and energy are continuously transferred within and between organisms and their physical environment. Demonstrate Achievement of the following Goals:Develop a problem statement based on the concept of the recycling of matter and energy that you would like to investigate.Create a model or experiment to demonstrate the concept of the recycling of matter and energy that you would like to investigate.How does the model/experiment demonstrate the concept that you investigated?Remember to use the “Claim, Evidence & Reasoning” rubric to defend your claims.THE MARTIAN SUN-TIMES4876800-28257500Next Generation Sunshine State Standards Benchmark: SC.8.E.5.7 Compare and contrast the properties of objects in the Solar System including the Sun, planets, and moons to those of Earth, such as gravitational force, distance from the Sun, speed, movement, temperature, and atmospheric conditions. (AA)(Also assesses SC.8.E.5.4 and SC.8.E.5.8.).Background Information for the teacher: Sources: and Our Solar system is a part of a spiral galaxy called the Milky Way. It is comprised of our nearest star, the Sun, and the celestial bodies that surround it. There are eight (8) planets in our solar system – Pluto was downgraded to a dwarf planet in 2006 mainly because it orbits around the Sun in “zones of similar objects that can cross its path.” Pluto has a more distinguished recognition because dwarf planets orbiting the Sun beyond Neptune are referred to as plutoids. Of the eight remaining planets, there are four (4) inner “rocky” planets and four (4) outer “gas giants.” One of particular interest, is Mars.Mars (Greek: Ares) is the god of War. The planet probably got this name due to its red color; Mars is sometimes referred to as the Red Planet. (An interesting side note: the Roman god Mars was a god of agriculture before becoming associated with the Greek Ares; those in favor of colonizing and terraforming Mars may prefer this symbolism.) The name of the month March derives from Mars. Mars has been known since prehistoric times. Of course, it has been extensively studied with ground-based observatories. But even very large telescopes find Mars a difficult target, it's just too small. It is still a favorite of science fiction writers as the most favorable place in the Solar System (other than Earth!).Early in its history, Mars was much more like Earth. As with Earth almost all of its carbon dioxide was used up to form carbonate rocks. But lacking the Earth's plate tectonics, Mars is unable to recycle any of this carbon dioxide back into its atmosphere and so cannot sustain a significant greenhouse effect. The surface of Mars is therefore much colder than the Earth would be at that distance from the Sun.Materials: Computer with Internet access, various spherical objects of different sizes (i.e., basketball, softball, soccer ball, large marbles small marbles, beads, etc.)ObjectivesStudents will: Explore the solar system Gather, interpret, and compare current weather information for Mars and Earth. Interpret and make inferences from data. Teacher note:Students are told that they are Earthling weather/news reporters for an Internet newspaper called the Martian Sun-Times. They will write articles for the newspaper comparing weather and/or life on Mars and Earth. It is recommended that you assign a team to each investigation. It is possible for students to collect data and answer the questions in one period if there is a computer for each group. Another period will be necessary for them to discuss and write their article. Encourage students to use their factual information but to consider one of the following formats when writing their articles: travel brochure, human or Martian interest - story, fashion report, disaster report, weather predictions, etc. Students will be evaluated on the basis of effort, job performance, team participation and their literary contribution. Your role will be to answer questions for students and assist students in their interpretations. As always is the case, it's important for you to have done the investigations before teaching them. Occasionally, you may need to further explain some science concept found in the "Stats" sheets. Part 1: Solar System Sizes40862254826000As a class, discuss the actual size of our solar system – the planets, moons, and the Sun. Note that all of the measurements in the table below are in thousands, and even hundreds of thousands, of kilometers. Using a spreadsheet program or calculator, begin to calculate the needed data in column 3. Once done, discuss these ratios as a class.To complete column 4, set Earth’s diameter to the size of a large marble and recalculate the sizes based on the ratios in column 3. Try to think of objects that correspond to the calculated sizes.AnswersSolar System BodyEquatorialDiameter(kilometers)DiameterCompared withEarth'sScaled DiametersScaled to…Earth=Large Marble(cm)Everyday Object Representing Solar System BodyMercury4,880Small beadVenus12,100Large marbleEarth12,75612.17Large MarbleMars6,787Small marbleJupiter143,200BasketballSaturn120,000Soccer ballUranus51,800Softball Neptune49,528Softball Pluto (Dwarf planet)~2,330Tiny beadMoon3,476Tiny bead Sun1,392,000Epcot Ball??? (Very Large)Source(s) perkins- and Student WorksheetPart 1: Solar System Sizes1.As a class, discuss the actual size of our solar system – the planets, moons, and the Sun. Note that all of the measurements in the table below are in thousands, and even hundreds of thousands, of kilometers. 2.Working in groups of 3 students, use a spreadsheet program or calculator, begin to calculate the needed data in column 3. Divide each equatorial diameter by Earth’s diameter. Once done, discuss these ratios as a class.3.To complete column 4, set Earth’s diameter to the size of a large marble and recalculate the sizes based on the ratios in column 3. (multiply Diameter compared with Earth x Earth’s Scaled Diameter)4.Try to think of objects that correspond to the calculated sizes.5.Arrange the planets in order, be sure to identify asteroid belt, inner planets, and outer planets.plete the discussion questions.Table 1: Ratio of the diameters of the other bodies compared with Earth's diameter.Solar System BodyEquatorialDiameter(kilometers)DiameterCompared withEarth'sScaled DiametersScaled to…Earth=Large Marble(cm)Everyday Object Representing Solar System BodyMercury4,880Venus12,100Earth12,75612.17Large MarbleMars6,787Jupiter143,200Saturn120,000Uranus51,800Neptune49,528Pluto (Dwarf planet)~2,330Moon3,476Sun1,392,000Discussion QuestionsIdentify the following:Inner planetsOuter planetsDwarf planetMoonStarCompare and contrast the sizes of the planets, moon, and starsPart 2 - Solar System Distance Scale Model Objective:Students will use mathematical equations, measuring tools and skills to create an accurate scale model of the solar system. Background Information:Distances in space can sometimes be hard to imagine because space is so vast. Think about measuring the following objects: a textbook, the classroom door, or the distance from your house to school. You would probably have to use different units of measurement. In order to measure long distances on Earth, we would use kilometers. But larger units are required for measuring distances in space. One astronomical unit equals 150 million km (1 AU = 150,000,000 km), which is the average distance from the Earth to the Sun.Materials:- receipt paper rolls (adding machine tape) or old VHS tape - meter stick - metric ruler - markers or colored pencils - scissorsEngage:Ask students to brainstorm about all of the objects that they have seen or observed in the night sky. Then discuss with the class how far away they think these objects (stars, planets, or satellites) are. Reinforce to students that there are planets much closer to the Earth than stars other than our Sun.ExploreAs a class, decide what scale you will use to determine your measured distance from the Earth to the Sun. This measurement will represent one Astronomical Unit (AU); (Ex: 10 cm = 1 AU).Multiply your chosen AU standard by 40 to determine the length of adding machine tape needed to complete your scale model activity. (10 cm x 40 = 400 cm of tape). Place your values in Table 2.Cut the adding machine tape to the appropriate length.Note: If you would like to include the Sun and Asteroid Belt, be sure to cut extra length (5 cm – 7cm should be adequate) at the start of your distance scale model. Students should also consider that the Sun’s size will not be to scale.Mark one end of the tape to represent the Sun.Measure from the edge of your group’s drawn Sun the distances for each planet. Place a dot where each planet should be placed. Include your scale on the model.Once all of the planets have mapped out, each group member should choose one or two planets to draw and color. Use your textbook or materials provided by your teacher as a reference.TABLE 2: Scaled Distances of PlanetsPLANETDistance from the Sun in Astronomical Units (AU)Standard-Scale(chosen by class/group)AU x scale unitDistance of Planet in the chosen scale.(cm)Mercury0.4Venus0.7Earth1.0Mars1.5Jupiter5.2Saturn9.5Uranus19.5Neptune30.2Pluto (Dwarf Planet)40Results and Conclusions:Why do you think scale models are important?Why were you instructed to multiply the distances in AU by 40 to determine how long your scale model needed to be?Compare and contrast the distances of the inner and outer planets from the SunExtension:Draw the planets by scale according to size (diameter) on the distance scale model.Research other celestial bodies in the universe (other known stars and galaxies). Using AU and units such as a light year, include these in you distance scale model.Part 3 - Martian Sun Times ReportersTeacher’s Procedure: Divide the class into seven different groups. Each person within the group will be assigned a specific job, e.g. secretary, researcher(s), editor, organizer.Assign to each group one of the investigations to research. Use the factual information obtained to prepare an article. This may consist of anyone of a variety of formats, e.g., a newspaper article, a travel brochure, a human –interest (or Martian interest) story, a fashion report, weather predictions. Student Procedure:Your group will be assigned an investigation to research and present to class. Use the factual information obtained to prepare an article. This may consist of anyone of a variety of formats, e.g., a newspaper article, a travel brochure, a human –interest (or Martian interest) story, a fashion report, weather predictions. Each person within the group will be assigned a specific job, e.g. secretary, researcher(s), editor, organizer.Summary of Investigations:Investigation I: Weather Forecasts for Earthlings and Martians. (Comparing weather for Mars and where you live). Compare temperatures and wind speeds on Mars and on Earth where you live, as well as noting the temperature ranges across the two planets. Investigation II : A Martian Summer Day (Comparing temperatures for summer on Mars and the place you live) Research the typical high and low summer temperatures for Mars. Compare temperatures for the current date on Mars and Earth based upon 30° N latitude. Investigation III: Stormy Mars: Dust Gets In My Eyes (Finding out about dust storms on Mars). Discover the effect of Martian dust storms on temperatures. Find out what might cause the storms and infer the length of one storm. Investigation IV: Probing Earth and Mars: What Should We Pack? (Finding out temperatures at various landing sites) If MASA (Martian Aeronautics and Space Administration) sent astronauts to Earth to places that match the latitude and longitude of Viking and Pathfinder landing sites, where would they land and what weather conditions would they encounter? Investigation V: Life on Mars: Where's the Party? (Finding out about the possibility of life on Mars) Learn about the Martian meteorite that may show evidence of life there. Are any temperatures on Mars similar to Earth? Considering the environment of Mars what, would a Martian look like? Investigation VI: Getting to Mars: Are We There Yet? (Finding out about Mars' orbit and NASA Missions) Learn about planetary orbits and interplanetary travel. How long would a trip from Earth to Mars take? What are some of the next Martian missions planned? Investigation VII: Exploring Mars: Oh Water, Where Art Thou? (Finding out about water on Mars) Early observers of Mars thought they saw canals on the planet. There are no canals, but there is a lot of evidence of once– abundant water on Mars. Students will see current Mars images and compare them to water– formed features on Earth.Extension:Allow students to imagine that they are living on one of the planets other than Earth. They must assume the role of a travel agent who is trying to attract visitors to their home world. They must create an Interplanetary Travel Brochure.Resources: ) HANDOUTDIFFERENTIATED INSTRUCTION: GUIDED/OPEN INQUIRYProperties of objects in the solar systemObjectives/Purpose: In this investigation students will: Compare and contrast the properties of objects in the Solar System including the Sun, planets, and moons to those of Earth, such as gravitational force, distance from the Sun, speed, movement, temperature, and atmospheric conditions. Construct scientific models of the solar system. Demonstrate Achievement of the following Goals:Develop a problem statement based on the concept of comparing and contrasting properties of objects in the Solar System that you would like to investigate.Create a model to demonstrate the concept of properties of objects in the Solar System that you would like to investigate.How does the model demonstrate the concept that you investigated?Remember to use the “Claim, Evidence & Reasoning” rubric to defend your claims.Imaginary Alien Life FormsAdapted from Mars Critters and Solar System Activities: Search for a Habitable Planet Next Generation Sunshine State Standards Benchmark: SC.8.E.5.7 Compare and contrast the properties of objects in the Solar System including the Sun, planets, and moons to those of Earth, such as gravitational force, distance from the Sun, speed, movement, temperature, and atmospheric conditions. (AA) (Also assesses SC.8.E.5.4 and SC.8.E.5.8.); SC.7.L.15.2 Explore the scientific theory of evolution by recognizing and explaining ways in which genetic variation and environmental factors contribute to evolution by natural selection and diversity of organisms. (AA) (Also assesses SC.7.L.15.1 and SC.7.L.15.3.)SC.7.L.16.2 Determine the probabilities for genotype and phenotype combinations using Punnett Squares and pedigrees.About This ActivityIn groups or as individuals, students will use their knowledge of Mars and living organisms to construct a model of a plant or animal that has the critical features for survival on Mars. This is a “what if” type of activity that encourages the students to apply knowledge. They will attempt to answer the question: What would an organism need to be like in order to live in the harsh Mars environment?ObjectivesStudents will:? draw logical conclusions about conditions on Mars.? predict the type of organism that might survive on Mars.? use a Punnett Square to predict offspring genotype and phenotype? construct a model of a possible Martian life form.? write a description of the life form and its living conditions focusing on necessary structural adaptations for survival.46177206286500BackgroundTo construct a critter model, students must know about the environment with extremes in temperature. The atmosphere is much thinner than the Earth’s; therefore, special adaptations would be necessary to handle the constant radiation on the surface of Mars. Also the dominant gas in the Mars atmosphere is carbon dioxide with very little oxygen. The gravitational pull is just over 1/3rd (0.38) of Earth’s. In addition, Mars has very strong winds causing tremendous dust storms. Another requirement for life is food—there are no plants or animals on the surface of Mars to serve as food! Scientists are finding organisms on Earth that live in extreme conditions previously thought not able to support life. Some of these extreme environments include: the harsh, dry, cold valleys of Antarctica, the ocean depths with high pressures and no Sunlight, and deep rock formations where organisms have no contact with organic material or Sunlight from the surface.VocabularyEcology, adaptations, gravity, geology, atmosphere, radiation exposure, weather, environment, genotype, phenotypePart 1Materialspaper (construction, tag board, bulletin board, etc.)colored pencilsglueitems to decorate critter (rice, macaroni, glitter, cereal, candy, yarn, string, beads, etc.)pictures of living organisms from EarthStudent Sheet, Mars Critters Student Sheet - Activity 1, If You Went to MarsMars Fact Sheet (pg. 56)ProcedureAdvanced PreparationGather materials.Set up various art supplies at each table for either individual work or small group work. This activity may be used as a homework project.Review the “If You Went to Mars” sheet, Mars Fact Sheet, and the background provided above along with the research conducted in the Martian Sun-Times activity or other desired research.Classroom ProcedureAsk students to work in groups to construct a model of an animal or plant that has features that might allow it to live on or near the surface of Mars. Have them consider all the special adaptations they see in animals and plants here on Earth.They must use their knowledge of conditions on Mars, consulting the Mars Fact Sheet, If You Went to Mars, and other resources such as web pages if necessary. Some key words for a web search might be “life in space” or “extremophile” (organisms living in extreme environments).They must identify a specific set of conditions under which this organism might live. Encourage the students to use creativity and imagination in their descriptions and models. If this is assigned as homework, provide each student with a set of rules and a grading sheet, or read the rules and grading criteria aloud and post a copy.Review the information already learned about Mars in previous lessons.Remind the students that there are no wrong critters as long as the grading criteria are followed.Include a scale with each living organism.Students select two different organisms that will mate.Revisit/Introduce Genetics:: Select one trait, the height of the “Mars Critter,” and generate a Punnett Square to predict the genotype (genetic make-up) and phenotype (physical characteristics) of the offspring that the two organisms would produce, if mated. Students will learn more about this in upcoming topics. For simplicity – tell students that the height trait will have a paired allele, each parent giving one possible allele to the offspring and tall is dominant and expressed in the offspring when present. Complete a sample Punnett Square, as a reminder. Advanced students may explore incomplete dominance.As an extension, mate offspring and/or generate Punnett Squares for other characteristics.GenotypePhenotypeTT(dominant tall)Talltt(recessive short)ShortTt (mixed hybrid)TallTeacher Guide2807970-620268000Source: db/detail.php?dbID=22&detID=2290 Description and QuestionsUse another page if more space is needed.The critter’s name:Describe the habitat and climate in which your critter lives.How does it move? Include both the form and method of locomotion. (For example: The miniature Mars Gopher leaps on powerful hind legs.)What does it eat or use as nutrients? Is it herbivorous, carnivorous, omnivorous, other? What is its main food and how does it acquire this food?What other creatures does it prey on, if any: How does it defend itself against predators?How does your creature cope with Mars’ extreme cold, unfiltered solar radiation, and other environmental factors?7. Suppose two Mar’s critters mated. One was Tall and the other was short. Using a Punnett Square, predict the offspring’s possible heredity of the tall gene. Each parent has two alleles for the height gene. Dad is homozygous tall (TT) and mom is short (tt). Predict the genotype (genetic make-up) and phenotype (physical characteristics) for the offspring3274695527050040252659652000465391516637000544449016637000402526580264000402526512750800033705805842000Dad590232511938000451866011938000Genotype: _____% TT ____% tt ____% TtPhenotype: ______% Tall ______% short587819529845Offspring020000OffspringGenotypePhenotypeTT (homozygous tall)Tall414909012128500tt (homozygous short)ShortTt (heterozygous)TallMomStudent SheetIf You Went to MarsFrom: “Guide to the Solar System.”By the University of Texas, McDonald ObservatoryMars is more like Earth than any other planet in our solar system but is still very different. You would have to wear a space suit to provide air and to protect you from the Sun’s rays because the planet’s thin atmosphere does not block harmful solar radiation. Your space suit would also protect you from the bitter cold, temperatures on Mars rarely climb above freezing, and they can plummet to -129oC (200 degrees below zero Fahrenheit). You would need to bring water with you, although if you brought the proper equipment, you could probably get some Martian water from the air or the ground.The Martian surface is dusty and red, and huge duststorms occasionally sweep over the plains, darkening the entire planet for days. Instead of a blue sky, a dusty pink sky would hang over you.West Rim of Endeavour Crater on MarsImage Credit: NASA/JPL-Caltech/Cornell/ASU FACT SHEET350000MARS FACT SHEET -338455120650046342302540000Fourth planet from the SunDistance from the Sun:Minimum: 206,000,000 kilometersAverage: 228,000,000 kilometers (1.52 times as far as Earth)Maximum: 249,000,000 kilometersEccentricity of Orbit:0.093 vs. 0.017 for Earth (0.00 is a perfectly circular orbit)Distance from Earth:Minimum: 56,000.000 kilometersMaximum: 399,000,000 kilometersYear:1.88 Earth years - 669.3 Mars days (sols) – 686.7 Earth daysDay:24.6 Earth hoursTilt of Rotation Axis:25.2o vs. 23.5o for EarthSize:Diameter: 6794 kilometers vs 12,76 kilometers for EarthSurface Gravity: 0.38 9 or ~ 1/3) Earth’s gravityMass: 6.4 x 1026 grams vs. 59.8 x 1026 grams for EarthDensity: 3.9 grams/mL vs. 5.5 grams/mL for EarthSurface Temperature:ColdGlobal extremes: -125oC (-190oF) to 25oC (75oF)Average at Viking 1 site high 010oC (15oF); low -90oC (-135oF)Atmosphere:Thin, un-breathableSurface pressure: ~6 millibars, or about 1/200th of Earth’s -Contains 95% carbon dioxide, 3% nitrogen, 1.5%argon, ~0.03% water (varies with season), no oxygen. (Earth has 78% nitrogen, 21% oxygen, 1% argon, 0.03% carbon dioxide.)Dusty, which makes the sky pinkish. Planet-wide dust storms black out the sky.Surface:Color: Rust redAncient landscapes dominated by impact cratersLargest volcano in the solar system (Olympus Mons)Largest canyon in the solar system (Valles Marineris)Ancient river channelsSome rocks are basalt (dark lava rocks), most others unknownDust is reddish, rusty, like soil formed from volcanic rockMoonsPhobos (“Fear”), 21 kilometers diameterDeimos (“Panic”), 12 kilometers diameterPart 2: Search for a Habitable PlanetNext Generation Sunshine State Standards:SC.8.E.5.3 Distinguish the hierarchical relationships between planets and other astronomical bodies relative to solar system, galaxy, and universe, including distance, size, and composition. (AA)(Also assesses SC.8.E.5.1 and SC.8.E.5.2.)SC.8.E.5.7 Compare and contrast the properties of objects in the Solar System including the Sun, planets, and moons to those of Earth, such as gravitational force, distance from the Sun, speed, movement, temperature, and atmospheric conditions. (AA)(Also assesses SC.8.E.5.4 and SC.8.E.5.8.) Objective:This lesson focuses on characteristics of planets that make them habitable. Living creatures need food to eat, gas to breathe, and a surface that provides a comfortable temperature, gravity, and place to move around. These requirements are related to what the planet’s surface and atmosphere are made of, and how large (gravity) and close to the Sun (temperature) the planet is located. The inner planets are small (low gravity), relatively warm, and made of solid rock. Some of them have atmospheres. The outer planets are large (high gravity), cold, and made of gaseous and liquid hydrogen and helium. A creature that might be comfortable on a gas giant would not be comfortable on a small rocky planet and vise versa. Vocabulary: habitable, life requirements, planet characteristics, surface and atmospheric composition (chemical examples) Time Required: One to two 45 minute class periodsMaterials: Creature Cards Solar System Images and Script Planet Characteristics TableStudents will define the life requirements of a variety of creatures and learn that these relate to measurable characteristics of planets the creatures might inhabit. By evaluating these characteristics, students discover that Earth is the only natural home for us in our solar system and that Mars is the next most likely home for life as we know it.ProceduresActivity 1. Define Habitability and Design CreaturesThis lesson has students take the places of extraterrestrial creatures exploring our solar system in search of new homes. They define creature life requirements and relate them to planet characteristics in order to choose homes. Several of these creatures have life requirements quite unlike life as we know it, where water and carbon are essential, and some are downright impossible. The goals here are not to study biochemistry, but habitability of planets. Bizarre creatures had to be invented for them to find homes on some of the planets in our solar system. Another goal is to encourage creativity and teamwork in designing creatures and selecting planets. This activity is one that is outside of the box.EngageSet the stage by reading introduction:We are space travelers from a distant star system. The crew of our spaceship includes six different types of creatures who live on different planets in that star system. Our star is expanding and getting very hot. Our home planets are heating up and soon we will need new places to live. It is our mission to find habitable planets for our six different types of creatures with different life requirements. In all we need to find new homes for five billion inhabitants. First we need to know what makes a planet habitable so we can set up probes to measure the characteristics of various planets. The different requirements for life can be related to measurable planetary characteristics. What do creatures require to live? ExploreBrainstorm on requirements and characteristics. Lead the students in producing a table similar to the one below. Encourage free-thinking, there aren't specific right answers, but lead students to the following topics, among others. Life requirements Planet characteristics food to eat surface & atmosphere composition gas to breathe atmosphere composition comfortable temperature temperature range ability to move surface type (solid, liquid, gas) gravity sizeAsk students what kinds of probes might be used to measure these characteristics. Answers may range from general to specific and may be based on science fiction. Examples may include cameras, radar, thermometers, and devises to measure magnetics, altitude, and light in all wavelengths from radio waves, through infrared, ultraviolet, and X-ray to gamma-ray. [Secondary school classes might do one of the excellent activities on the electromagnetic spectrum or activities related to solar system missions.]Divide students into six or more teams (more than one group can design the same creature). Explain that each team represents one of the six different types of creatures on our mission. Today we will make models of creatures having specific life requirements. Later we will collect data on a new planetary system in order to search for new homes.Distribute one creature card to each team. Each card contains the information on a single line A-F below. Tell students that each team is supposed to create a creature that fits the characteristics on their creature card. Students may select art supplies (or drawing supplies) and should be able to complete their creatures in approximately 15-20 minutes. Students will name their creature ambassador and be ready to introduce it to the class. Encourage teamwork and creativity.[Teacher, you may get questions on some of the food or gases. Handle these as they come, but do not provide this vocabulary ahead of time unless it comes up during brainstorming. Simply explain that they are various chemical elements or compounds. They are needed only for matching with planetary characteristics and should not be tested vocabulary.] Ask each team to introduce their creature ambassador and to explain their creature's needs and any specific features of the model. This will take longer than you expect because students really get involved with their creatures. CreatureFoodBreathesMotionTemperatureAheliumhydrogenfliescoldBrockcarbon dioxideflieshotCcarbonoxygenwalksmoderateDmethanehydrogenswimscoldEwatercarbon dioxidewalksmoderateFcarbonoxygenswimsmoderateAssessment: Evaluate team presentations and collect descriptions of how their creature meets its life requirements.EXPLAINActivity 2. Tour solar system and evaluate for habitability Prepare students for solar system tour. Tell students that they will have to take notes on the planets to report back later. Students will work in the same teams as when they made creatures. The grade level/ability will determine how the teacher structures the information gathering. Each team may record the information on all planets or on just one or two planets. Young students may simply compare planet characteristics to those on their creature cards and check off boxes of matching characteristics on the planet chart.Distribute copies of the blank planet characteristics chart or put it on the blackboard/overhead. Show slides/photos of the planets and read the text provided below. For elementary students, exclude the data in parentheses. For secondary students, include the data. As you tour the planets, it may be necessary to repeat each section twice for younger students to get enough information to pile information on overhead or blackboard planet characteristics chart as teams report data they recorded on planet (size, surface type, composition, atmosphere and temperature). Attached table gives suggested answers. Students will probably be able to name the planets, but this is not a test. Alternatively, each student could fill in a chart to allow evaluation of listening skills. Also, students could work cooperatively to complete one chart per team.Have teams compare the characteristics chart on the planets with the creature requirements on their creature card. Decide which planets (if any) would be suitable homes for their creature. Report their choices orally and explain, if necessary. Tabulate on the blackboard.CreaturePlanet(s)A4, 5 (Saturn and Jupiter), but also 2,3 (Neptune and Uranus)B8 (Venus)C, F7 (Earth)D2,3 (Neptune and Uranus)E6 (Mars)No creatures can live on planets 1 or 9 (Mercury or Pluto)Ask students to create a finale or read the finale below. Now that the creatures have evaluated habitable planets we will send down spaceships to check out the surfaces in detail. Creatures A, B, D and E find uninhabited planets that are just suited to their needs. They decide to settle on their chosen planets. Creatures C and F are both interested in the same planet. Creature F finds the salt water to be a perfect home for it, while creature C finds the land to be overpopulated and polluted. They decide that there isn't room for one billion more inhabitants and decide to look for a habitable planet in another solar system. Assessment: Collect Planet Characteristics tables and compare with the suggested answers above. Do not require a perfect match, but allow students to think critically and creatively. Allow adaptations of the environment (such as turning water into hydrogen and oxygen) and other reasonable modifications.EvaluateWriting assignment: Ask students to write a paragraph explaining why the planet they found will or will not be suitable for their creature. The paragraph could be in the form of a news report to be sent back to their dying solar system. Creature CardsWe are space travelers from a distant star system. The crew of our spaceship includes six different types of creatures who live on different planets in that star system. Our star is expanding and getting very hot. Our home planets are heating up and soon we will need new places to live. It is our mission to find habitable planets for our six different types of creatures with different life requirements. In all we need to find new homes for five billion inhabitants. Your task 1) Design a creature that fits the following needs for life. 2) Give it a name. and 3) Introduce it to the class and explain how it meets its needs for life.Creature A FoodHelium BreathesHydrogen Motion Flies TemperatureColdWe are space travelers from a distant star system. The crew of our spaceship includes six different types of creatures who live on different planets in that star system. Our star is expanding and getting very hot. Our home planets are heating up and soon we will need new places to live. It is our mission to find habitable planets for our six different types of creatures with different life requirements. In all we need to find new homes for five billion inhabitants. Your task 1) Design a creature that fits the following needs for life. 2) Give it a name. and 3) Introduce it to the class and explain how it meets its needs for life. Creature B FoodRockBreathesCarbon dioxideMotionFliesTemperatureHotWe are space travelers from a distant star system. The crew of our spaceship includes six different types of creatures who live on different planets in that star system. Our star is expanding and getting very hot. Our home planets are heating up and soon we will need new places to live. It is our mission to find habitable planets for our six different types of creatures with different life requirements. In all we need to find new homes for five billion inhabitants. Your task 1) Design a creature that fits the following needs for life. 2) Give it a name. and 3) Introduce it to the class and explain how it meets its needs for life.Creature CFoodCarbonBreathesOxygenMotionWalksTemperatureModerateWe are space travelers from a distant star system. The crew of our spaceship includes six different types of creatures who live on different planets in that star system. Our star is expanding and getting very hot. Our home planets are heating up and soon we will need new places to live. It is our mission to find habitable planets for our six different types of creatures with different life requirements. In all we need to find new homes for five billion inhabitants. Your task 1) Design a creature that fits the following needs for life. 2) Give it a name. and 3) Introduce it to the class and explain how it meets its needs for life.Creature DFoodMethaneBreathesHydrogenMotionSwimsTemperatureColdWe are space travelers from a distant star system. The crew of our spaceship includes six different types of creatures who live on different planets in that star system. Our star is expanding and getting very hot. Our home planets are heating up and soon we will need new places to live. It is our mission to find habitable planets for our six different types of creatures with different life requirements. In all we need to find new homes for five billion inhabitants. Your task 1) Design a creature that fits the following needs for life. 2) Give it a name. and 3) Introduce it to the class and explain how it meets its needs for life. Creature EFoodWaterBreathesCarbon DioxideMotionWalksTemperatureModerateWe are space travelers from a distant star system. The crew of our spaceship includes six different types of creatures who live on different planets in that star system. Our star is expanding and getting very hot. Our home planets are heating up and soon we will need new places to live. It is our mission to find habitable planets for our six different types of creatures with different life requirements. In all we need to find new homes for five billion inhabitants. Your task 1) Design a creature that fits the following needs for life. 2) Give it a name. and 3) Introduce it to the class and explain how it meets its needs for life. Creature FFoodCarbonBreathesOxygenMotionSwimsTemperatureColdSearch for a Habitable PlanetSolar System Images and ScriptToday we are traveling through an outer section of the Milky Way galaxy. There are many, many stars. We are approaching a medium-sized star, the type that often has habitable planets. As we draw closer we see that there are nine planets orbiting this star. We will tour this planetary system and use our probes to measure planet characteristics in our search for a habitable planet. Record this information about your planet then when we have completed our tour we will collect all our results. We will evaluate our results to look for a new place to live.We will now tour this new planetary system, starting from the outside and going toward the star: We are approaching the first planet.The first “planet” is tiny (2350km). In fact, it was downgraded from a planet to a dwarf planet in 2006 mainly because it orbits around the Sun in “zones of similar objects that can cross its path.” It is made of rock and methane ice. It has almost no atmosphere (just a trace of methane) and is very cold (-230oC).The second planet is a medium large (49,500km) and made of liquid hydrogen and helium. It has a thick atmosphere of hydrogen, helium and methane. It is very cold (-220 oC).The third planet is very similar to the 2nd except that it has a small ring system. It is medium large (51,000 km) and made of liquid hydrogen and helium. It also has a thick atmosphere of hydrogen, helium and methane and is very cold (-210 oC).The fourth planet is large (120,500 km) and has an extraordinary ring system. It has no solid surface, but is a giant mass of hydrogen and helium gas outside and liquid hydrogen inside. It is cold (-180 oC).Search for a Habitable PlanetSolar System Images and ScriptThe fifth planet is the largest (143,000 km) in this planetary system. Like the fourth, it is a gas giant made of hydrogen and helium with no solid surface. It is also cold (-150oC) in the upper atmosphere, but increases in temperature and pressure and becomes liquid in the interior.The sixth planet is small (6786 km) and rock. There is some water ice in polar regions and a thin atmosphere of carbon dioxide. The temperature is moderate (-23oC).The seventh planet is medium small (12, 750 km). The surface is made of liquid water and rock with some carbon compounds. The atmosphere is mostly nitrogen and oxygen with some carbon dioxide and water vapor. The temperature is moderate (21oC).The eighth planet is also medium small (12,100 km). The atmosphere of carbon dioxide is so thick that we can’t see the rocky surface beneath it, but need our radar probes. The temperature is very hot (480oC).The ninth planet is tiny (4880 km) and rocky. It has almost no atmosphere (just a hint of helium). Temperatures are generally hot, but extreme variable, ranging from -180oC on the space-facing side to 400oC on the star-facing side.We have now finished our tour and it’s time to compile all of our data. Each team will report its results and we will make a comparison chart.PLANET CHARACTERISTICS(Teacher Key)SizeSurface Type and CompositionAtmosphereTemperatureName1tiny 2350 km solid rock, methane ice none (methane) very cold -230 C Pluto 2medium large 49,500 km liquid hydrogen, helium thick hydrogen, helium, methane very cold -220 C Neptune 3medium large 51,100 km liquid hydrogen, helium thick hydrogen, helium, methane very cold -210 C Uranus 4large 120,500 km liquid hydrogen thick hydrogen, helium cold -180 C Saturn 5very large 143,000 km liquid hydrogen thick hydrogen, helium cold -150 C Jupiter 6small 6786 km solid rock, water ice thin carbon dioxide moderate -23 C Mars 7medium small 12,756 km solid rock, liquid water, carbon compounds medium nitrogen, oxygen moderate 21 C Earth 8medium small 12,100 km solid rock thick carbon dioxide very hot 480 C Venus 9tiny 4878 km solid rock none (helium) variable range -180 to 400 CMercury PLANET CHARACTERISTICSStudent SheetSizeSurface Type and CompositionAtmosphereTemperatureName123456789 Planetary Exploration & Extreme Life Forms (Differentiated Lab)Revised by: University of Miami – Science Made Sensible FellowsNext Generation Sunshine State Standards: SC.8.E.5.1 Recognize that there are enormous distances between objects in space and apply our knowledge of light and space travel to understand this distance. SC.8.E.5.3 Distinguish the hierarchical relationships between planets and other astronomical bodies relative to solar system, galaxy, and universe, including distance, size, and composition. SC.8.E.5.7 Compare and contrast the properties of objects in the solar system including the Sun, planets, and moons to those of Earth, such as gravitational force, distance from the Sun, speed, movement, temperature, and atmospheric conditions.SC.7.L.15.3 Explore the scientific theory of evolution by relating how the inability of a species to adapt within a changing environment may contribute to the extinction of that species. SC.7.L.16.2 Determine the probabilities for genotype and phenotype combinations using Punnett Squares and pedigrees. SC.7.L.17.3 Describe and investigate various limiting factors in the local ecosystem and their impact on native populations, including food, shelter, water, space, disease, parasitism, predation, and nesting sites.Objective: Students will research a planet in our solar system, including information about the atmosphere, surface conditions, etc. Then they will have to design an alien life form that would be adapted to live on their planet. They will present their planet research and alien life forms to the class. They will also use a Punnett Square to predict offspring genotype and phenotype.Engage: Introduce adaption and extreme environments. Scientists are finding organisms on Earth that live in extreme conditions previously thought not able to support life. Some of these extreme environments include the harsh, dry, cold valleys of Antarctica and the bottom of the ocean under high pressure, no oxygen and no light. If life forms on other planets were to exist, what conditions would they face? How would they survive? What type of adaptations might they need? Explain that students will first research a planet, and then create a life form that had adapted to survive the conditions on their planet.Materials: computers with internet accessbooks on the planetsconstruction papermarkers/crayons/colored pencilsTeacher Notes: Assign one group to each planet excluding Earth. For the first part of the activity, students will research their planet, filling in a data sheet. All information can be found on the websites provided on the student handouts. Emphasize the importance of using appropriate internet sources, no Wikipedia. Once students have completed their planet worksheet, they should start on the alien life form worksheet. They will also draw their life form on construction paper. Groups will present both their planet research and their aliens including explanations of its specific adaptations that allow it to survive on their planet. Upper level students could be required to do a PowerPoint presentation.Name: ____________________________________ Date: ___________________ Pd: __________Planet Research WorksheetFill in the worksheet below about your assigned planet; be sure to include units where necessary. Some helpful websites for your research are: our_solar_system/solar_system.html exploratorium.edu/ronh/weight/index.html Planet: _____________________________Planetary Symbol: ___________________________Diameter: ___________________________Mass: _____________________________________Order from the Sun: ___________________Distance from the Sun: _______________________Gravity: ____________________________Gravity compared to Earth: ___________________If you weigh 100 lbs. on Earth, how much would you weigh on your planet? _________________Temperature Range: ___________________Average Temperature ________________________Length of Day (rotation period): _________Length of year (revolution period): ______________Tilt of axis: __________Eccentricity of Orbit: ________Number of Satellites: ________What is the atmosphere like on your planet? What gases? Poisonous? Dry? Etc.Describe the surface of your planet.Describe what your planet looks like including any unique features such as rings.In complete sentences, list 5 additional interesting facts about your planet that are not already discussed on this worksheet.Name: ____________________________________ Date: ___________________ Pd: __________Extreme Alien Life FormsYou will create an alien life form that has adaptations enabling it to survive on your assigned planet. Keep in mind the information you learned about your planet during your research. Complete the questions below, and then draw your life form on the provided construction paper. Make sure to label the aspects of your life form that let it survive on your planet. Include your life form’s name, your planet, and your name and class period on the front of your drawing. You will be presenting your drawings to the class.Your Planet:The name of your life form:Describe the habitat and climate in which your life form lives:How does it move? Include both the form and method of locomotion. (For example: The miniature Mars Gopher leaps on powerful hind legs.)What does it eat or use as nutrients? Is it herbivorous, carnivorous, omnivorous, or other? What is its main food and how does it acquire this food?What other creatures does it prey on, if any? How does it defend itself against predators?Describe other adaptations your life form has developed to cope with your planet’s unique environment.Suppose two alien creatures mated. One was tall and the other was short. Using a Punnett Square, predict the offspring’s possible heredity of the tall gene. Each parent has two alleles for the height gene. Dad is homozygous tall (TT) and mom is homozygous short (tt). Predict the genotype (genetic make-up) and phenotype (physical characteristics) for the offspring.Dad → ______ ______4086225825500______444817549530Offspring00Offspring______ Mom ↑The resulting offspring:Genotype: __________% TT __________% tt __________% TtPhenotype: __________% tall __________% shortGenotype PhenotypeTT (homozygous tall)Talltt (homozygous short)ShortTt (heterozygous)TallSTUDENT HANDOUTDIFFERENTIATED INSTRUCTION: GUIDED/OPEN INQUIRYPlanetary Exploration andExtreme alien Life Forms Objectives/Purpose: In this investigation students will: Compare and contrast the properties of objects in the solar system (gravitational force, distance from the Sun, speed, movement, temperature, and atmospheric conditions.)Describe and investigate various limiting factors in the local ecosystem and their impact on native populations, including food, shelter, water, space for these “alien” environmentsRelate how the inability of an “alien” species to adapt within a changing environment may contribute to the extinction of that speciesDemonstrate Achievement of the following Goals:Develop a problem statement based on the concept of “planetary exploration and extreme alien life forms” that you would like to investigate.Model the concept/idea that you outlined in your problem statement above.How does the model demonstrate the concept that you investigated?Remember to use the “Claim, Evidence & Reasoning” rubric to defend your claims. STUDENT HANDOUTDIFFERENTIATED INSTRUCTION: OPEN INQUIRYVisualizing Our Solar System – Scale Models Objectives/Purpose: In this investigation students will: Recognize that there are enormous distances between objects in space Apply our knowledge of light and space travel to understand distances in space Distinguish the hierarchical relationships between planets and other astronomical bodies relative to solar system, galaxy, and universe, including distance, size, and composition. Demonstrate Achievement of the following Goals:Develop a problem statement based on the concept of scale hierarchical relationships between planets and other astronomical bodies that you would like to investigate.Model one hierarchical relationships between planets and other astronomical bodies that you would like to investigate.How does the model demonstrate the concept that you investigated?Remember to use the “Claim, Evidence & Reasoning” rubric to defend your claims.What Causes the Seasons?Benchmark: SC.8.E.5.9 Explain the impact of objects in space on each other including: 1. the Sun on the Earth including seasons and gravitational attraction 2. The Moon on the Earth, including phases, tides, and eclipses, and the relative position of each body. (AA)SC.7.N.1.4 Identify test variables (independent variables) and outcome variables (dependent variables) in an experiment. (Assessed as SC.8.N.1.1)SC.7.N.3.2 Identify the benefits and limitations of the use of scientific models. (Assessed as SC.7.N.1.5Overview:Because the axis of the Earth is tilted, the Earth receives different amounts of solar radiation at different times of the year. The amount of solar radiation received by the Earth or another planet is called insolation. The tilt of the axis produces the seasons. In this experiment, a simulated Sun—a light bulb—will shine on a temperature probe attached to a globe. You will study how the tilt of the globe influences warming caused by the lighted bulb.Objective:Compare simulated warming of your city by the Sun in the winter and in the summer.Explain the causes of the cycle of seasons on Earth.Materials:46863005143500Globe of the EarthTapeMetric rulerTemperature probe or thermometerLamp with 100-watt bulbRing stand and utility clamp20-cm Length of stringEngage:Provide students with visuals of extreme climates and ask if anyone has lived in a climate very different then that of Miami. Discuss possible reasons for the change in seasons. Accept all possible answers from students and readdress ideas at the end of the lab. Common misconception note: Students often believe that the seasons are caused to the distance of Earth from the Sun and may be aware of the elliptical nature of Earth’s orbit. You may note at the end of the lab, when addressing this misconception that the Northern and Southern hemispheres have opposite seasons, which would disprove the distance from sun hypothesis. Additionally, you may note that Earth is actually farther from the sun during the summer than in the Northern hemisphere. Explore:445770053340Figure 100Figure 1Procedure:Prepare the light bulb (simulated Sun).Fasten the lamp to a ring stand as shown in Figure 1.Stand the ring stand and lamp in the center of your work area.3886200-34290000Position the globe with the North Pole tilted away from the lamp as shown in Figure Position the bulb at the same height as the Tropic of Capricorn. Note: The Sun is directly over the Tropic of Capricorn on December 21, the first day of winter.Attach the temperature probe to the globe.Find your city or location on the globe.Tape the temperature probe to the globe with the tip of the probe at your location. Place the tape about 1 cm from the tip of the probe.4351020835660Figure 200Figure 2396049517208500To keep the tip of the temperature probe in contact with the surface of the globe, fold a piece of paper and wedge it under the probe as shown in Figure 2.Position the globe for winter (in the Northern Hemisphere) data collection.Turn the globe to position the North Pole (still tilting away from the lamp), your location, and the bulb in a straight line.Cut a piece of string 10-cm long.Use the string to position your location on the globe at 10 cm from the bulb (you may position farther, up to 20 cm, depending on the intensity of the lamp that you are using).Do not turn on the lamp until after you have recorded the initial temperature.Collect winter data.Record the initial temperature.After 5 minutes record the final temperature.Turn off the light.Record the beginning and final temperatures (to the nearest 0.1°C).Position the globe for summer data collection.Move the globe to the opposite side of the lamp.Position the globe with the North Pole tilted toward the lamp. Note: This represents the position of the Northern Hemisphere on June 21, the first day of summer.Turn the globe to position the North Pole, your location, and the bulb in a straight line.Use the string to position your location on the globe 10 cm from the bulb.Do not turn on the lamp until after you have recorded the initial temperature.Collecting summer data.Let the globe and probe cool to the beginning temperature that you recorded for the winter setup.When the globe and probe have cooled, begin data collection.Record the final temperature after 5 minutes. Turn the lamp off.Data:(Record all data to the nearest 0.1°C.)WinterSummerFinal temperature °C °CBeginning temperature °C °CTemperature change °C °CExplain:Processing Data:In the space provided in the data table, subtract to find the temperature change for each season.How does the beginning and final temperature change for summer compare to the temperature change for winter?During which season is the sunlight more direct? Explain.What would happen to the temperature changes if the Earth was tilted more than 23.5?degrees?As you move the globe from its winter position to its summer position, the part of the globe closest to the bulb changes. Describe how it changes.What other factors affect the climate in a region?Identify the test variable, outcome variable, and any controlled variables in the experiment.Why is this model useful for understanding the seasons and how is it limited?What improvements can be made to this model of the seasons?Elaboration:Repeat the experiment for locations in the Southern Hemisphere and other areas (different latitudes) in the Northern Hemisphere to develop an understanding of climate zones.DIFFERENTIATED INSTRUCTION: OPEN INQUIRY what causes the seasons?Objectives/Purpose: In this investigation students will: Develop and use a model of the Earth and Sun to describe the cyclic patterns of seasons. Identify the effect of the Sun on the Earth’s seasons. Apply our knowledge of heat transfer and astronomical systems to describe the seasons.Demonstrate Achievement of the following Goals:Develop a problem statement based on the concept the Sun influencing conditions on Earth.Analyze and interpret data to make inferences and predictions and to defend conclusions regarding the cause of seasons. Identify the benefits and limitations of the use of scientific models.Remember to use the “Claim, Evidence & Reasoning” rubric to defend your claims.ANTI-DISCRIMINATION POLICYFederal and State LawsThe School Board of Miami-Dade County, Florida adheres to a policy of nondiscrimination in employment and educational programs/activities and strives affirmatively to provide equal opportunity for all as required by law: Title VI of the Civil Rights Act of 1964 - prohibits discrimination on the basis of race, color, religion, or national origin. Title VII of the Civil Rights Act of 1964, as amended - prohibits discrimination in employment on the basis of race, color, religion, gender, or national origin. Title IX of the Educational Amendments of 1972 - prohibits discrimination on the basis of gender. Age Discrimination in Employment Act of 1967 (ADEA), as amended - prohibits discrimination on the basis of age with respect to individuals who are at least 40. The Equal Pay Act of 1963, as amended - prohibits gender discrimination in payment of wages to women and men performing substantially equal work in the same establishment. Section 504 of the Rehabilitation Act of 1973 - prohibits discrimination against the disabled. Americans with Disabilities Act of 1990 (ADA) - prohibits discrimination against individuals with disabilities in employment, public service, public accommodations and telecommunications. The Family and Medical Leave Act of 1993 (FMLA) - requires covered employers to provide up to 12 weeks of unpaid, job-protected leave to “eligible” employees for certain family and medical reasons. The Pregnancy Discrimination Act of 1978 - prohibits discrimination in employment on the basis of pregnancy, childbirth, or related medical conditions. Florida Educational Equity Act (FEEA) - prohibits discrimination on the basis of race, gender, national origin, marital status, or handicap against a student or employee. Florida Civil Rights Act of 1992 - secures for all individuals within the state freedom from discrimination because of race, color, religion, sex, national origin, age, handicap, or marital status. Veterans are provided re-employment rights in accordance with P.L. 93-508 (Federal Law) and Section 295.07 (Florida Statutes), which stipulates categorical preferences for employment. ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download