Five Common Mistakes in Writing Lesson Plans



Five Common Mistakes in Writing Lesson Plans

(and how to avoid them )

Dr. Bob Kizlik

Updated March 4, 2003

Successful teachers are invariably good planners and thinkers. They didn't get that way overnight. The road to success requires commitment and practice, especially of those skills involved in planning lessons, activities, and managing classroom behavior. Planning  lessons is a fundamental skill all teachers must develop and hone, although implementation of this skill in actual teaching can, and usually does, take some time. So let's begin at the beginning.

In my career as a teacher and teacher educator, I have read and evaluated thousands of lesson plans written by education students at all levels. On a consistent basis, I see mistakes that distort or weaken what the plans are supposed to communicate. If you are serious about improving your skill in planning lessons, you should begin by first thinking carefully about what the lesson is supposed to accomplish. There is no substitute for this. In teaching students how to develop lesson plans, the following are mistakes I have observed that students make most often:

1. The objective of the lesson does not specify what the student will actually do that can be observed. Remember, an objective is a description of what a student does that forms the basis for making an inference about learning. Poorly written objectives lead to faulty inferences.

2. The lesson assessment is disconnected from the behavior indicated in the objective. An assessment in a lesson plan is simply a description of how the teacher will determine whether the objective has been accomplished. It must be based on the same behavior that is incorporated in the objective. Anything else is flawed.

3. The materials specified in the lesson are extraneous to the actual described learning activities. This means keep the list of materials in line with what you actually plan to do. Overkilling with materials is not a virtue!

4. The instruction in which the teacher will engage is not efficient for the level of intended student learning. Efficiency is a measure that means getting more done with the same amount of effort, or the same amount with less effort. With so much to be learned, it should be obvious that instructional efficiency is paramount.

5. The student activities described in the lesson plan do not contribute in a direct and effective way to the lesson objective. Don't have your students engaged in activities just to keep them busy. Whatever you have your students do should contribute in a direct way to their accomplishing the lesson objective.

A lesson plan that contains one or more of these mistakes needs rethinking and revision.  Below is a rationale and guide to help you develop effective lesson plans and avoid the five common mistakes.

[pic]

FIRST, YOU MUST KNOW HOW TO PLAN

The purpose of a lesson plan is really quite simple; it is to communicate. But, you might ask, communicate to whom? The answer to this question, on a practical basis, is YOU! The lesson plans you develop are to guide you in organizing your material and yourself for the purpose of helping your students achieve intended learning outcomes. Whether a lesson plan fits a particular format is not as relevant as whether or not it actually describes what you want, and what you have determined is the best means to an end. If you write a lesson plan that can be interpreted or implemented in many different ways, it is probably not a very good plan. This leads one to conclude that a key principle in creating a lesson plan is specificity. It is sort of like saying, "almost any series of connecting roads will take you from Key West Florida to Anchorage Alaska, eventually." There is however, one any only one set of connecting roads that represents the shortest and best route. Best means that, for example, getting to Anchorage by using an unreliable car is a different problem than getting there using a brand new car. What process one uses to get to a destination depends on available resources and time.

So, if you agree that the purpose of a lesson plan is to communicate, then, in order to accomplish that purpose, the plan must contain a set of elements that are descriptive of the process. Let's look at what those elements should be.

THE LESSON PLAN

1. Preliminary Information

The development of a lesson plan begins somewhere, and a good place to start is with a  list or description of  general information about the plan. This information sets the boundaries or limits of the plan. Here is a good list of these information items: (a) the grade level of the students for whom the plan is intended; (b) the specific subject matter (mathematics, reading, language arts, science, social studies, etc.); (c) if appropriate, the name of the unit of which the lesson is a part; and (d) the name of the teacher.

2. The Parts

Each part of a lesson plan should fulfill some purpose in communicating the specific content, the objective, the learning prerequisites, what will happen, the sequence of student and teacher activities, the materials required, and the actual assessment procedures. Taken together, these parts constitute an end (the objective), the means (what will happen and the student and teacher activities), and an input (information about students and necessary resources). At the conclusion of a lesson, the assessment tells the teacher how well students actually attained the objective.

In a diagram, the process looks something like this:

Input ======>process=====>output

Let's look at each part separately.

Input: This part refers to the physical materials, other resources, and information that will be required by the process. What are these inputs? First of all, if you have thought about what the lesson is supposed to accomplish, the inputs are much easier to describe. In general categories, inputs consist of:

1. Information about the students for whom the lesson is intended. This information includes, but is not limited to the age and grade level of the students, and what they already know about what you want them to learn.

2. Information about the amount of time you estimate it will take to implement the lesson.

3. Descriptions of the materials that will be required by the lesson, and at some point, the actual possession of the materials.

4. Information about how you will acquire the physical materials required.

5. Information about how to obtain any special permissions and schedules required. For example if your lesson plan will require a field trip, you must know how to organize it. If your lesson will require a guest speaker (fire chief, lawyer, police officer, etc.) you must know how to make arrangements for having that person be at the right place at the right time.

[pic]

Process

This is the actual plan. If you have done the preliminary work (thinking, describing the inputs), creating the plan is relatively easy. There are a number of questions you must answer in the creating the plan:

1. What are the inputs? This means you have the information (content description, student characteristics, list of materials, prerequisites, time estimates, etc.) necessary to begin the plan.

2. What is the output? This means a description of what the students are supposed to learn.

3. What do I do? This means a description of the instructional activities you will use.

4. What do the students do? This means a description of what the students will do during the lesson.

5. How will the learning be measured? This means a description of the assessment procedure at the end of the lesson. For a short discourse on how to write an assessment, click here.

As an example, here is a template that I have used successfully to teach students to write lesson plans:

[pic]

Lesson Plan Format:

Teacher_______________________________________   Subject_________________________

Grade Level________________________________   Date___________________________

I. Content: This is a statement that relates to the subject-matter content. The content may be a concept or a skill. Phrase this as follows: I want my students to: (be able to [name the skill]) OR (I want my students to understand [a description of the concept]). Often times, this content is predetermined or strongly suggested by the specific curriculum you are implementing through your teaching.

II. Prerequisites: Indicate what the student must already know or be able to do in order to be successful with this lesson. (You would want to list one or two specific behaviors necessary to begin this lesson). Some research indicates that up to 70% of what a student learns is dependent on his or her possessing the appropriate prerequisites.

III. Instructional Objective: Indicate what is to be learned - this must be a complete objective. Write this objective in terms of what an individual student will do, not what a group will do. Limit your objective to one behavioral verb. The verb you choose must come from the list of defined behavioral verbs on my web site. Make sure your objective relates to the content statement above.

IV. Instructional Procedures: Description of what you will do in teaching the lesson, and, as appropriate, includes a description of how you will introduce the lesson to the students, what actual instructional techniques you will use, and how you will bring closure to the lesson. Include what specific things students will actually do during the lesson. In most cases, you will provide some sort of summary for the students.

V. Materials and Equipment: List all materials and equipment to be used by both the teacher and learner and how they will be used..

VI. Assessment/Evaluation: Describe how you will determine the extent to which students have attained the instructional objective. Be sure this part is directly connected to the behavior called for in the instructional objective.

VII. Follow-up Activities: Indicate how other activities/materials will be used to reinforce and extend this lesson. Include homework, assignments, and projects.

VIII. Self-Assessment (to be completed after the lesson is presented): Address the major components of the lesson plan, focusing on both the strengths, and areas of needed improvement. Determine here how you plan to collect information that will be useful for planning future lessons. A good idea is to analyze the difference between what you wanted (the objective) and what was attained (the results of the assessment).

Of course, there is an immense difference between being able to plan and actually being able to carry out the plan. However, if you have thought carefully about where you are going before you begin writing your plan, the chances of your success, as well as the success of your students, are much greater.

To see a somewhat different, yet effective approach to lesson planning, click here for Lesson Plans the Easy Way!

To see examples of verbs used in behavioral objectives, click here.

To see some lesson plans developed by education students using the template above, click here.

[pic]

The Madeline Hunter Lesson Design Model

Madeline Hunter's eight steps have stood the test of time. Below is a brief description of each. Understanding these components will add to your understanding of how to plan a lesson, and is useful for the model presented above.

1.  Anticipatory Set (focus) - A short activity or prompt that focuses the students' attention before the actual lesson begins. Used when students enter the room or in a transition. A hand-out given to students at the door, review question written on the board, "two problems" on the overhead are examples of  the anticipatory set.

2.  Purpose (objective) - The purpose of today's lesson, why the students need to learn it, what they will be able to "do", and how they will show learning as a result are made clear by the teacher.

3.  Input - The vocabulary, skills, and concepts the teacher will impart to the students - the "stuff" the kids need to know in order to be successful.

4.  Modeling (show) - The teacher shows in graphic form or demonstrates what the finished product looks like - a picture worth a thousand words.

5.  Guided Practice (follow me) - The teacher leads the students through the steps necessary to perform the skill using the trimodal approach - hear/see/do.

6.  Checking For Understanding (CFU) - The teacher uses a variety of questioning strategies to determine "Got it yet?" and to pace the lesson - move forward?/back up?

7.  Independent Practice - The teacher releases students to practice on their own based on #3-#6.

8.  Closure - A review or wrap-up of the lesson - "Tell me/show me what you have learned today".

Please feel free to comment on the ideas expressed on this page. The ADPRIMA web site is intended to give you both information and to stimulate your thinking about teaching and learning. In short, your growth as a student or teacher depends on your willingness to learn and think. To that end, I hope this information is useful to you.

|Planning For Instruction |[pic] |

1) Content- List the important facts, key concepts, skills, or key vocabulary terms that you intend to cover. You can also prepare an outline with key learning outcomes. Remember to refer to your curriculum guides. State and national standards can be found at:

2) Goals- Identify the aims or outcomes that you want your students to achieve as a result of the lesson you plan to teach. Goals are end products and are sometimes broad in nature. Goals relate directly to the knowledge and skills you identify in part one: content.

3) Objectives- Identify the objectives that you hope your students will achieve in the tasks that will engage them in the learning process. Objectives are behavioral in nature and are specific to performance. Objectives tell what you will be observing in student performance and describe criteria by which you can measure performance against. In many ways, objectives represent indicators of performance that tell you, the teacher, to what extent a student is progressing in any given task. Instructional objectives can start with a "given" that describes a condition that enables your students to perform any given task. A "given" could be an activity, a specific set of directions, materials needed to perform a task, an assignment, or anything that sets up a condition for students to engage in the task being observed and measured for performance. The heart of the objective is the task that the student is expected to perform. It is probably one of the most important parts of the lesson plan because it is student centered and outcomes based. Objectives can range from easy to hard tasks depending on student abilities.

A good illustration on Mager's (1984) Preparing Instructional Objectives can be found at:

3a) Materials- List the materials and resources that will be needed for the lesson to be successful. In this case, you should also list technology resources needed to achieve objectives.

4) Introduction- Describe or list a focusing event or attention grabber that will motivate your students to want to pay attention and learn about what you plan to teach. This will depend on the ages and stages and of your students and will rely on students' interests and backgrounds. Remember, getting your students to attend and respond to your introduction will set the stage for the rest of the lesson.

5) Development- Describe how you plan to model or explain what you want your students to do. Modeling the learning behaviors you expect of your students is a powerful development tool and provides demonstration that students can then imitate or practice on their own. During development, models of teaching are used to facilitate student learning. Models can include direct instruction, inquiry, information processing strategies, or cooperative learning strategies. More information on models of teaching can be found on the following link:



6) Practice- List or describe ways in which you will provide opportunities for your students to practice what you want them to learn. The more opportunities you provide, the better chance they have to master the expected outcomes. These opportunities are in-classroom assignments or tasks that give you, the teacher, the chance to guide and monitor progress. There are tons of activities that you can download from the net; TeAch- provides a comprehensive source of links to activities for all subject areas. Go to the Teacher Resources section of the site and click on lesson plans, quick activities, etc.



7) Independent Practice- List or describe ways to provide opportunities for your students to complete assignments to measure progress against the goal of instruction. These assignments are meant to give teachers the chance to determine whether students have truly mastered the expected outcomes. Remember to only plan for tasks that you believe students can accomplish without your guidance.

8) Accommodations- List or describe ways that you will differentiate instruction according to students' needs. This can include any curricular adaptations that are needed to meet special needs students. For more on differentiating instruction, go to:



For more ideas on serving the needs of special education students, go to:



9) Checking For Understanding- - List or describe ways that you will check for understanding. Assessment and ongoing feedback are necessary for monitoring progress. This can include questioning, conferencing, or journal writing/reflection writing. TeAch- has a rubric generator that can help develop a checklist for assessing ongoing student progress.

Go to:

10) Closure- List or describe ways that you can wrap up a lesson. This can include telling students the most important concepts that were covered in the lesson, asking them what they thought were the key concepts (or what they learned), or preparing them for the next lesson building upon what was presented. The key is to leave your students with an imprint of what you hoped to achieve in any given lesson.

11) Evaluation- List or describe ways that you will assess or measure student success in achieving the outcomes that you planned to reach. This can include a variety of ways to evaluate student performance. The following links can help:





12) Teacher Reflection- This section is to be completed after lesson. It represents what you think worked, or what did not work, and why. It is meant to give you some insight into practice and will hopefully help you to make adjustments and modifications where necessary.





................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download