Curriculum Vitae



Curriculum VitaeName:-Mr RAHUL VISHWANATH DANDAGE Designation& Present organisation:- Asst. Professor, Mechanical Engg. Department, Rajendra Mane College of Engineering & Technology (RMCET), Ambav(Devrukh) Dist- Ratnagiri. PIN-415804 (Maharashtra )Residential Address:- Flat No. F-5, First Floor, Laxmi Nrusinha Apartment, Lower Lane, Devrukh Tal- Sangameshwar Dist- Ratnagiri PIN-415804Contact No.:- 9405079559, 9975171527 E-mail ID:- dandagerahul@ Languages Known:-Marathi, Hindi, EnglishNationality:-IndianMarital Status:-MarriedReligion & Caste:-Hindu BrahminMembership of Professional Body:- Life member of ISTE (LM-50865 Year-2006)Academic DetailsQualificationSchool/ CollegeBoard/UniversityYear of PassingMarks Obtained (%)S.S.C.Milind High School, Rampur (Chiplun)Kolhapur 199591.71H.S.C.Gogate-Joglekar College, RatnagiriKolhapur199778.50B.E.(Mechanical)FAMT, RatnagiriUniversity of Mumbai200161.50M.E. ( Mechanical-Production)KIT’s COE, KolhapurShivaji University, Kolhapur201073.31Ph.D. (Mechanical Engineering) (Pursuing)Sardar Patel College of Engineering, MumbaiUniversity of MumbaiCoursework Completed10 pts.Achievements:-Won second prize for Best paper presentation at National conference on Emerging Trends in Engineering, Technology & Architecture (NCETETA-2012) organized by D.Y. Patil College of Engineering & Technology, Kolhapur during 28-29 January, 2012Consistent student feedback (more than 85 %) for all the semesters Consistent good results for the subjects taught.Ph.D. coursework completed with 10.0 score.Appointed as member of Editor board for the International Conference on Science, Technology & Management (ICSTM-15) (ISBN: 978-81-931039-1-3) held at YMCA, New Delhi on 1st Feb. 2015 Appointed as member of Editor board for the International Journal of Advance research in Science & Engineering, ISSN-2319-8354 for year 2014-15Appointed as member of National Advisory Board for the 2nd International Conference on Recent Trends in Engineering, Science and Management (ICRTESM-16) (ISBN: 978-81-932074-3-7) held at YMCA New Delhi on 20th February, 2016.Appointed as member of National Advisory Board for the 5th International Conference on Recent Innovations in Science, Engineering and Management (ICRISEM-16), (ISBN: 978-81-932074-6-8) held at India International Centre, New Delhi on 20th March, 2016.Appointed as member of Editor Board for the International Journal of Scientific Research & Education (IJSAE), ISSN-2321-7545 from March 2016.Paper publication:-Journals-Dandage R. V., Bhatwadekar S. G., Bhagwat M. M., “Design, Development & Testing of a Four Component Milling Tool Dynamometer” International Journal of Applied Engineering and Technology ISSN: 2277-212X (Online) 2012 Vol. 2 (1) January-March, pp. 45-50Dandage Rahul, Khandekar Shailesh, “Development of a framework for TQM in Engineering Education-A MBNQA approach ” International Journal of Science, Technology & Management (IJSTM) ISSN: 2394-1537 (Online)Vol. 4 (S.I.2) March 2015, pp. 199-204Kavatkar Akshay, Rajmane Akshay, Dandage Rahul, “Developing a sugarcane feeding system for Jaggery making plants in rural India ” International Journal of Science, Technology & Management (IJSTM) ISSN: 2394-1537 (Online) Vol. 4 (S.I.1) February 2015, pp. 225-228Dandage Rahul, Lad Amitraj, Pinjari Santosh, Hajare Prasad, Dhebe Manoj, “Development of framework for effective implementation of TPM in engineering education institute” International Journal of Innovative Research in Science and Engineering (IJIRSE) ISSN:2454-9665(Online) Vol. 02 (02) February 2016, pp. 109-114Dandage Rahul, Sawant Akshay, Kushwaha Vivek, Salvi Aodumbar, “Design and Development of set up for Grease filling Machine” International Journal of Advance Research in Science and Engineering (IJARSE) ISSN:2319-8354(Online) Vol. 05 (03) March 2016, pp. 95-101Conferences- Dandage R.V., Bhatwadekar S.G., “Indirect Measurement of Tool Wear” International Conference on Total Engineering Analysis and Manufacturing Technologies (TEAMTECH 2008) held at IISc, Bangalore on 22-24 September 2008Dandage R.V., Bhatwadekar S.G., “Design and Fabrication of a Strain Gauge Based Four Component Milling Dynamometer” International Conference on Emerging and Futuristic System And Technology ( ICE-FST 09 ) held at Laxmi Devi Institute Of Engineering & Technology, Alwar ( Rajasthan) on 9-11 April 2009Dandage R.V., Bhatwadekar S.G., “Design and Fabrication of a Strain Gauge Based Four Component Milling Dynamometer” National Conference on Advances In Mechanical Engineering ( NCAME-09 ) held at Rajiv Gandhi Institute Of Technology, Mumbai on 15-16 January, 2009Dandage R.V., Bhatwadekar S.G., “Design and Fabrication of a Strain Gauge Based Four Component Milling Dynamometer” International Conference on Advances in Mechanical Engineering ( ICAME-2010 ) held at S.V. National Institute of Technology, Surat ( Gujarat)on 4-6 January, 2010Dandage R.V. “An Overview of Alternative Fuels” National Conference on Recent Trends in Harnessing of Non-Conventional Energy Resources held at Vivekananda College, Kolhapur on 15-16 December, 2010Dandage R.V. “Business Process Reengineering- A Literature Survey Report” National conference on Emerging Trends in Engineering & Technology (NCETET-2011) held at Shree L.R. Tiwari college of Engineering, Mira Road, Mumbai on 11 March, 2011Dandage R.V. “A consolidated methodology for implementation of Business Process Reengineering” National Conference on Emerging Trends in Engineering, Technology & Architecture (NCETETA-2012), ISBN: 978-81-920561-1-1 held at D.Y. Patil College of Engineering & Technology, Kolhapur on 28-29 January, 2012Dandage Rahul, Khandekar Shailesh, “Development of a framework for TQM in Engineering Education-A MBNQA approach ” International conference on Recent Trends in Engineering, Science & Management (ICRTESM-15) ISBN: 978-81-931039-2-0 held at JNU, New Delhi on 15th March, 2015Kavatkar Akshay, Rajmane Akshay, Dandage Rahul, “Developing a sugarcane feeding system for Jaggery making plants in rural India ” International Conference on Science, Technology & Management (ICSTM-15) ISBN: 978-81-931039-1-3 held at YMCA, New Delhi on 1st Feb. 2015Dandage Rahul, Mantha Shankar, Rane Santosh, “Exploring risks and barriers in International projects” 3rd International conference on Industrial Engineering (ICIE-2015), ISBN: 978-93-84935-56-6, Vol. II, pp- 875-880, held at SVNIT, Surat on 26-28 November, 2015, Dandage Rahul, Lad Amitraj, Pinjari Santosh, Hajare Prasad, Dhebe Manoj, “Development of framework for effective implementation of TPM in engineering education institute” 2nd International Conference on Recent Trends in Science, Engineering and Management (ICRTSEM-16) ISBN: 978-81-932074-3-7, held at YMCA, New Delhi on 20th February 2016, pp. 278-283Dandage Rahul, Sawant Akshay, Kushwaha Vivek, Salvi Aodumbar, “Design and Development of set up for Grease filling Machine” International Conference on Recent Innovation in Science, Engineering and Management (ICRISEM-16) ISBN:978-81-932074-6-8 held at India International Center, New Delhi on 20th March 2016Short term courses/ Workshops/ Seminars organized :-Coordinator of two day workshop on “Advanced Technologies in Mechanical Engineering Labs (ATMEL)” during 26-27 December, 2011 for non-teaching technical staff members.Coordinator of seminar on “Human Resource Management” by Prof. R.G. Sawant, RMCET on 26/08/2011Coordinator of seminar on “Konkan Railway Project” by Mr. Ravindra Kamble, Regional Mechanical Engineer, Konkan Railway Corp. Ltd. on 15/09/2011Coordinator of seminar on “Solar Energy” by Dr. A.K. Bhat, Principal, SSPM’sCOE, Kankavali on 03/10/2011Coordinator of seminar on “CAD/CAM/CAE” by Mr. Prasanna Joshi, CADCAMGURU,Pune on 14/10/2011Coordinator of Three day workshop on “PLC Automation” by Mr. Sanjay Gawade, Gawade Electricals, Nashik during March 31 to April 02, 2012Coordinator of Seminar on “Piping Engineering” by Mr. Vasant Mestry, Suvidya Institute of Technology, Mumbai on 07/08/2012. Coordinator of Industry Institute Interaction Programme by Mr. Paresh Teredesai, Kone Cranes Pvt. Ltd. Pune on 14/02/2014.Coordinator of Seminar on “Awareness in the field of Oil, Gas and Power industries” by Mr. Mahesh Rajwade, SIT, Mumbai on 17/02/2014.Conducted a Seminar on “Outcome Based Education and Accreditation” on 16/04/2014 for all Head of Departments and NBA coordinators of RMCET.Coordinator of a Two Day workshop on “Research Methodology” for 60 faculties from 12 different institutes and industry on 5th & 6th June, 2014.Coordinator of One Day Workshop on “Outcome Based Education (OBE)” for Teaching Staff of RMCET on 12th July, 2014Coordinator of 2 day workshop on “Robotics” as a part of National robotic championship (NRC-2015) in association with ARK Techno-Solutions, Mumbai and IIT Bombay on 28 & 29 January, 2015.Coordinator of Seminar on “Industrial Automation” by Mr. Suhas Gadekar, Prolific Systems, Pune on 06/08/2015Coordinator of Seminar on “Supply Chain Management and its Industrial applications” by Mr. Amol Lovlekar, Factory manager, Hindustan Unilever Ltd. on 01/10/2015.Coordinator of 6 day certificate course on “Advanced Mechatronics Systems” in association with Prolific Systems and Technologies, Pune during 13-18 January, 2016.Coordinator of Seminar on “Awareness in the field of Oil, Gas and Power industries” by Mr. Vasant Mestri , Managing Director, SIT, Mumbai on 15/01/2016.Coordinator of 40 Hrs Soft Skills development Course in association with Seed Infotech Pvt Ltd Pune for students of SE, TE and BE Mechanical Engg during 12/01/2016 to 05/02/2016.Short term courses/ Workshops/ Seminars attended :-Attended one week FDP on “Micro/Nano Tribology” held at I.I.T. Bombay during 1-5 January 2007Attended one week FDP on “Robotics & Mechatronics” held at I.I.T. Bombay during 9-13 July 2007Attended one day Seminar on “Quality & Research In Engineering Education” held at RMCET on April 7, 2008Attended one week FDP on “Mission 10x – High Impact Teaching Skills” held at SSPM’s CoE, Kankavali during 25-29 May, 2009Attended Two Day International Seminar on “World Class Manufacturing” held at K.I.T. CoE, Kolhapur during 7-8 June 2007Attended Two Day National Seminar on “Applications Of Soft Technologies In Higher Education” held at RMCET during 25-26 July 2008Attended Two Day “Mission 10x Advanced workshop on Learning Approach” held at RMCET during 30-31 July 2009Attended one Day Seminar on “Computational Fluid Dynamics” held at RMCET on 01 October 2009Attended one week FDP on “Alternative Fuels for IC Engines” held at N.I.T. Calicut during 28 June-03 July 2010Attended Two day Workshop on “Refrigeration and air Conditioning” held at RMCET during 20-21 August 2010Attended one week FDP on “Automatic Control Engineering” held at I.I.T. Bombay during 5-9 December 2011Attended one week FDP on “Recent trends in Automotive Technology” held at RMCET during 26-30 December 2011Attended one week FDP on “Research in Production & Industrial Engineering” held at Walchand CoE, Sangli during 10-14 December 2012Attended one week FDP on “Project Management- An Introduction and Applications” held at Saveetha Engineering College, Chennai during 24-30 June, 2013Attended one week FDP on “Philosophy of guiding for Excellence in Projects” held at RMCET during 26 February-02 March 2014.Attended Two Day Workshop on “Accreditation & Quality Assurance” held at Fr. Agnel College of Engg, Mumbai during 4-5 April, 2014Attended Two weeks ISTE approved main workshop on “Fluid Mechanics” held at GIT Lavel and conducted by IIT Kharagpur during 20 May -30 May 2014.Attended Two weeks ISTE approved main workshop on “Control Systems” held at FAMT, Ratnagiri and conducted by IIT Kharagpur during 2 December -12 December 2014.Attended one week ISTE STTP on “Finite Element Analysis using ANSYS 15.0” at RMCET, Ambav during 12 January -16 January 2015.Attended two week TEQIP STTP on “Modelling and Simulation” at Goa College of Engineering, Farmagudi, Goa during 07/12/2015 to 18/12/2015.Work Experience :-Teaching Experience- 11.5 yearsIndustrial Experience- 03 yearsWorking as Assistant Professor in Mechanical Engineering Department in Rajendra Mane College of Engineering & Technology, Ambav (Devrukh) since 08/02/2005. (Worked as Head of Mechanical Engineering Department for 03 years since 01/08/2012 to 13/07/2015).Worked as Lecturer in Mechanical Engineering Department in Sahyadri Polytechnic, Sawarde during 19/07/2004 To 07/02/2005Worked as Visiting Lecturer in College of Food Technology, Kharavte, Chiplun during 01/09/2004 To 31/01/2005Worked as Sales Engineer in New Anucool Engineers, Kolhapur during 01/03/2004 To 18/07/2004Worked as Sr. Engineer (Marketing & Admin.)in C-Tech Engineers, Karad during 01/02/2003 To 28/02/2004Worked as Trainee Engineer (Production)in AFECO Heating Systems, Kolhapur during 01/08/2001 To 30/09/2002Subjects taughtEngineering Mechanics-EM (SEM-I)- 10 timesKinematics of Machinery-KOM (SEM-IV)- 04 timesIndustrial Engineering and Management-IEM (SEM-IV)- 01 timeMechatronics-MTRX (SEM-VI)- 08 timesRefrigeration and Air Conditioning-RAC (SEM-VII)- 02 timesBusiness Process Reengineering-BPR (SEM-VIII)-04 times Manufacturing Planning & Control-MPC (SEM-VII)-02 timesMechanical Measurement and Control-MMC- (SEM-V)-02 timesSupply Chain Management-SCM-(SEM-VII)-01 timeIndustrial Engineering & Management-IEM-(SEM-VIII)-01 timeAdditional Responsibilities handled-Lab. Incharge for Kinematics of Machinery, Engineering Mechanics, Mechatronics Laboratories, Faculty Coordinator of MESA for year 2010-11, 2011-12, 2015-16Member of NBA Apex committee & departmental NBA Coordinator in the year 2011,Time table Incharge 2008-09 and 2009-10, Cultural Committee Incharge for Annual Gathering Arohan2011, Head of Debate event during Annual Gathering Arohan2009,2010 & 2012Food Committee Incharge for National Seminar ASTHE2008, Counselor for FE students during 2009-2011, Project Coordinator for BE Mechanical for year 2011-12, PPT Head for National Level student’s competition NOVATEUR 2011Judge for PPT event at National Techfests like Novateur 2012 and Scintilla 2K14 etc. Head of Stage and Seating Arrangement Committee during the 40th State Level Science Exhibition held at RMCET, Ambav during 17 January-21 January, 2015.Judge for National level paper presentation competition Sahyadri 2015 at Sahyadri Ploytechnic, Sawarde on 12/09/2015.Institute level Coordinator of NIRF (National Institutional Ranking Framework ) data submission activity during January 2016.Training and placement coordinator for Mechanical Engineering Department for year 2015-16.Head of Industry Institute Interaction Committee (IIIC) at RMCET since January 2016.I hereby declare that the information furnished above is true and correct.Dandage Rahul Vishwanath ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download