Manually setting up the Linksys RE9000

Manually setting up the Linksys RE9000

In situations where you want to bypass the Linksys RE9000 MU-MIMO Range Extender's setup wizard, you can follow the steps below to manually configure the range extender.

NOTE: This article assumes that your Linksys RE9000 is on factory defaults. To reset the Linksys RE9000, press the Reset button for 5 seconds.

Step 1: Turn ON the Linksys RE9000 and wait for the light indicator to blink orange.

Step 2: Using a wireless device, locate and connect to the Linksys Extender Setup Wi-Fi.

Step 3: Once connected, open a browser and go to to launch setup.

NOTE: If the Linksys RE9000 has not detected a DHCP server, it defaults to its IP address, 192.168.1.1.

Step 4: Click the Manual Setup link at the bottom.

Step 5: Enter "admin" in the Password field then click Login.

Step 6: You have now bypassed the Setup wizard. Configure your manual settings as needed. NOTE: In order to configure the upstream connection, you must use the Wizard option by going to Wireless > Wizard.

Select your mode of choice, click Change and follow the on-screen instructions.

NOTE: If you are changing to Access Point (Wired Range Extender) mode, make sure to have an ethernet cable ready to connect your Linksys RE9000 to your router.

Setting up the Linksys RE9000 using WPS

The Linksys RE9000 MU-MIMO Range Extender can be set up using Wi-Fi Protected SetupTM (WPS). This article will show you the steps on how to do so. Step 1: Plug the Linksys RE9000 into a wall outlet that is close to your router. NOTE: Wait for the light indicator to change to orange. To learn more about this device's light behavior, click here. Step 2: Press the WPS button on your wireless router. Step 3: Press the WPS button at the side panel of your Linksys RE9000. NOTE: The indicator light on the front of the range extender will blink green. Step 4: Wait for the front light to turn solid green to indicate that the connection is successful.

Accessing the Linksys RE9000's web-based setup page

The Linksys RE9000 MU-MIMO Range Extender is a tri-band ethernet bridge and a range extender all-in-one. This article will show you how you can access the Linksys RE9000's web-based setup page.

Step 1: Connect a device to your range extender's Wi-Fi and launch a browser once connected.

Step 2: Do one of the following methods to log in to the Linksys RE9000's web-based setup page:

Enter "" in the Address bar. Enter "" (for Windows? users) in the Address bar

NOTE: If you changed your Linksys RE9000's name, then you will need to use the custom name (e.g., ).

Enter "" (for Mac? users) in the Address bar.

NOTE: If you changed your Linksys RE9000 name, then you will need to use the custom name (e.g., ).

Enter the Linksys RE9000's IP address.

NOTE: If the Linksys RE9000 does not detect a DHCP server, the default IP address is 192.168.1.1. Otherwise, you will need to look up your range extender's IP address in the DHCP table. To know how to do this using a Linksys Wi-Fi Router, click here. If you are using a Linksys Smart Wi-Fi Router, click here.

QUICK TIP: Some options may not be available in Access Point mode due to the design and functionality as an access point.

Step 3: You will be prompted for an administrative Password. If you have changed your password, enter your customized password. Otherwise, enter the default "admin" in the field then click Login.

ADVANCED CONFIGURATION

1. What is 802.11r?

802.11r is a proprietary implementation of IEEE 802.11r-2008 (fast BSS transition) on Linksys RE9000 to support Seamless Roaming. When an 802.11r-compliant device such as iPhone? roams from one Linksys RE9000 to another Linksys RE9000 or any Linksys Max-Stream product, the fast transition mechanism can reduce the authentication time needed for a full WPA/WPA2 Personal four-way handshake to under 100 ms.

2. When would I need to enable the 802.11r feature on my Linksys RE9000?

If you have any Linksys Max-Stream wireless product in your network, enable this feature to support Fast BSS Transition for roaming from one Linksys RE9000 to another Linksys RE9000.

3. Does the Linksys RE9000 support Seamless Roaming?

Yes. Seamless Roaming allows your supported device such as an iPad? or iPhone? to roam between a supported Linksys Max-Stream router or range extender products (make sure that the latest firmware is installed with Seamless Roaming support).

Moving between a traditional router and range extender, your home Wi-Fi signal can experience lag or a dropped connection. With its intuitive technology, Seamless Roaming allows you to move from one room to another and automatically switches your device to connect to the strongest Wi-Fi signal.

4. What are the guidelines when using Seamless Roaming on my Linksys RE9000?

In order for Seamless Roaming to work properly, you must configure the range extender accordingly:

Works with another Linksys Max-Stream extender or router

NOTE: You may need a firmware update to add the Seamless Roaming support. Check your product's Release Notes to be sure.

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download