SharePoint Content Standards - Richard Harbridge: Insights
SharePoint Content StandardsWhat follows are the standards this organization has defined for users working with SharePoint content.Authors Note: Since these are broader than other Standards I have broken them out a bit more. Each standard may have a brief description outlining the reasoning behind the standard in a sub-point to help encourage explanation and understanding of why and when the Standard is applicable.I also recommend putting a contact person for each set of your standards, or if you are a large organization breaking down management of your standards and assigning contacts for each set of standards. This way when any user has a question they can refer to a note in the actual standard that says something along the lines of: “If you have any questions around our Homepage standards contact the Homepage Administrator Richard@”.General StandardsExisting standards and policies which relate to the use of technology in the enterprise still apply. This includes acceptable use, privacy, copyright, records retention, confidentiality, and content security. Content Contribution and OwnershipSite Sponsors/Owners/Managers are accountable for ensuring that the content posted on their pages is accurate and relevant and complies with records retention policies. While Site Sponsors, Owners, Managers are accountable everyone has a shared responsibility of ensuring content is accurate, relevant, current, and appropriate. Only post content that you “own” on a collaboration site or on your My Site Web site. Ownership means that the document is or was created by someone in your department and your department is committed to maintaining the content for its entire lifecycle. If a document is not owned by your department but access to the document is needed on your site, ask the owner to post it and then create a link to it on your site. This improves how current or up to date content will be and reduces the potential of having multiple copies of the same document throughout SharePoint confusing search and adding extra layers of document management. An exception to this rule may be if a source and target relationship is created through the use of send to functionality. In this way the chances of ‘copies’ being out of date has been reduced. Edit content in place. Don’t delete documents to create new ones. Because content contributors on one site may have a link to content on a site they don’t own, it is important to have a standard reminding users to “edit documents in place” so that links do not break. Do not post content that we do not own the legal right to post electronically, including .PDFs or scanned images of journal articles or other documents from sources to which our organization does not have online publishing rights. A link may be created to this content on the content owner’s Web site. Copyright violations can be very costly to our business. Use shorter names for sites, folders, and documents and control the depth of the site and folder structures to reduce the lengths of URLs. There are length restrictions which can have a significant impact if not planned for/careful with naming: . Content SecurityFor standards related to content security see our SharePoint Security Policy. Discussion Boards and Internal ForumsMust have a champion who will also serve as the discussion board moderator. It is this individual’s responsibility to ensure questions are answered, that the discussion board is adding value and to help the facilitation and categorization of discussions to improve readability and response. Document StandardsFile names should be topical and descriptive. Avoid the use of dates or version numbers in file names whenever possible. Reduce file size whenever possible. No files over 50mb should be stored within SharePoint. Homepage StandardsAll content displayed on the homepage must be approved by an appropriate subject matter expert as well as the homepage administrator. In order to be fair in determining what content should be on the homepage it’s important to follow an approval process for homepage content. This is the most visited/hit page in our SharePoint implementation so it’s important to carefully consider design, usability, and applicability of the content before it is posted. Navigation Core navigation changes to the top navigation bar of the home site must be approved by the Taxonomy administrator. Whenever possible the navigation should not be nested more than 3 levels deep. Page Design and LayoutAll pages within the portal should render on 1024 by 768 screen resolutions with no horizontal scrolling. Whenever possible vertical scrolling should be avoided by splitting the content into multiple pages. The most important content should be in the top left most region of the page. Since readers read left to right and top to bottom this is where they will look first and should be where the most prominent/important content on any page should begin. Light fonts on light backgrounds and dark fonts on dark backgrounds should never be used on any pages or articles of content. Pictures and MediaAny added pictures should have alt tags defined for them. If possible all video content should have an available transcript. It is important to follow all existing individual consent policies when including pictures of other people in any SharePoint site.RatingsContent ratings represent how useful the content was to you. In our organization a piece of content rated as 5 is very useful, where as a rating of 0 or 1 would denote that it was not useful to you. Rich Text and Page ContentDo not underline anything that is not a hyperlink. Try bolding it instead. Make any link text concise and descriptive so that it is clear and easy to read what the link references. Bad: Click here for the latest application form Better: Download the latest application form Best: Download the latest application form Links to documents or pages within the site collection should not open in a new window. Links to documents or pages in another site collection should open in a new window. Links outside the intranet (to another application or external site) should open in a new window. Site StandardsEvery SharePoint Site must have an identified sponsor, owner, and/or manager. Further roles can be identified such as a site administrator, security administrator, or content manager for any specific site. A review of each site must be conducted at a minimum of every 12 months with the sponsor, owner, or manager as well as any other relevant site roles. This review must ensure that site content is accurate, relevant, and current. A checklist to assist the site review process will be provided to you upon creation of the site and can be downloaded at the following location: All SharePoint sites should have a primary and secondary contact responsible for the site and its content. The site contact(s) should be listed on the site homepage where (if possible) their names link to their respective profile pages. The email address of each contact should also be displayed to simplify and encourage contact with them. New site requests must follow the defined site provisioning process found here: Content Ownership and Site Ownership must be assigned before a site can be provisioned. Any significant security requirements must be identified. Storage and growth expectations must be identified. Sites should have short descriptive names without spaces or special characters. Use shorter names for sites, folders, and documents and control the depth of the site and folder structures to reduce the lengths of URLs as there are length restrictions which can have a significant impact: . Avoid the use of spaces, or special characters as they add extra length to the URL of content when encoded. Communities (SharePoint 2013)Whenever possible a community site should have at least 200 to 300 members.This helps ensure that there is a large enough group of people to keep the community site fresh, active, and that personal connection/communication isn’t as viable (based on the size of the collective).Authors Note: Microsoft has stated this a few times for many reasons around growth, activity, and other reasons. However that doesn’t mean a smaller community wouldn’t have potential munities should have at least one clear designated moderator.The moderator will be responsible for clarifying the community’s purpose, when possible aggregating responses into best replies, re-categorizing mistakenly categorized questions or discussions, managing reported content, and managing badges/rewards.Moderators should have a simple ‘Moderator Badge’ using the badge functionality of the SharePoint community applied to themselves (allowing for easier identification).All categories within community sites should have an image associated with them that represents the category.Depending on how sites are provisioned, tracked, and managed it may be important to note the type of community site clearly for each community site. This enables easier management, and coordination around communities. There are four types of community sitesPrivate - available only to invited members.Closed - read for all but only approved members can contribute. The owner gets an action request when someone wants to join or auto-approval can be enabled.Open with explicit action required to join (i.e. users click the "Join this community" button).Open with no explicit requirement to join. Anyone can participate without joining. Without joining, however, there is no automatic following of sites.If a question has been answered, but a best reply isn’t clear to the poster – they should contact the moderator to assist in compiling a best reply answer that is an aggregation of the answers.An additional view of “No Replies” should be created to assist users in finding unanswered questions, or discussions that have not been followed up to improve awareness.Social TaggingSocially tagged content is still security trimmed. That means that any socially tagged content will only be shared and available to other people who can already see that content. Tags should add to the value of the content. Use words that help identify it, or describe what you found to be positive about the content. Here are some examples sectioned into the two types of tags. Identification Project XYZ Marketing Schedule Positive Excellent Comprehensive Good Case Study It is entirely acceptable to tag content the same way that someone else has already tagged it. It is entirely acceptable to tag content with a phrase or word even if that content has a column value specifying the same thing. Negative tagging is not allowed in our organization. Instead or alternatively identifying words should be used. Acceptable Outdated No Longer Relevant Incomplete Missing References or Research Unacceptable Prehistoric Thinking Bad Case Study Bull Crap Profanity Status Updates (SharePoint 2010)Status updates can contain any information you think would be beneficial to share. Some examples of useful status updates are updating people on your work, asking for help, or stating where you are: “Working on SharePoint Content Standards for the SharePoint Standards Project.” “Out of the office and at the Microsoft SharePoint Conference.” “Can’t remember how to update my outlook signature. Can anyone help?” “Group of us are going to Starbucks for a coffee. Would anyone like to come or want one?” “Just finished the status update examples! Hope everyone likes them!” NewsFeed (SharePoint 2013)Avoid split posts to the newsfeed based on length limits (meaning if you have more to say than 512 characters consider a discussion or other medium for capturing/sharing).“Everyone” or Public Newsfeed Posts are not security trimmed (meaning everyone can see these posts, links contained within them, or other post information).Automatically generated posts are security trimmed (where appropriate).Site newsfeed posts are security trimmed based on the site’s security.Negative #Hashtags are not allowed in our organization. Instead or alternatively identifying words should be used.Acceptable Examples#Help#Marketing#Boston#LessonLearnedUnacceptable#Fail#MarketingSucks#Profanity#StupidUser ProfilesYou are responsible for updating and maintaining any personal information you would like to share on your profile. You are responsible for ensuring that any information you share on your personal profile is targeted and secured in the way you want it to be. The privacy options available to you in 2010 are: You only (Private) Your manager (Manager) Your workgroup (Organization) Your colleagues (Contacts) Everyone (Public) The privacy options available to you in 2013 are:About Me can should contain any relevant information that you believe will be beneficial to share and highlight about yourself. Here are some examples of About Me descriptions to help clarify what you could share. “I have been a Quality Engineer with our company for over 10 years. I spend most of my time coming up with effective methods of stress testing, and verifying the quality of our products. I live in Boston, MA with my two daughters, my dog, and my wife and run a community hack space (where we take apart things and see how they work and build new things out of them).” “Designer Extraordinaire: I work with our Marketing department and other areas of the business on everything relating to design including Print, Web, and Interactive.” “Currently I am on contract and working with HR. I am currently enrolled in my third year of a MBA program at the Boston University’s School of Management. I have so far been involved in our new Microsoft Technology Training initiative, our corporate wide succession planning initiative, helped drive the implementation of our coaches’ corner and mentoring system and many more great projects.” Apps (SharePoint 2013)No Apps Allowed Approach: Assuming Site Owners cannot install and use apps for SharePoint.When you visit the SharePoint store you may view apps that interest you, but will be unable to purchase or download these apps directly. Instead you will need to fill out an app request which will be reviewed and the app team will try their best to meet your underlying needs.Apps Allowed: Assuming Site Owners can install and use apps for SharePoint (various levels of control).TBD (based on decision path for apps results – still to be done).References:Plan for Apps in SharePoint 2013 10 Key Things You Need To Know About SharePoint 2013 Community Sites SharePoint 2010 Governance Whitepaper SharePoint 2010 Site and Solution planning ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- forside det digitale projektbibliotek aalborg universitet
- chief kanim middle school ptsa
- wellness program announcement letter
- sharepoint content standards richard harbridge insights
- the committee to encourage corporate philanthropy
- answers to chapters 1 2 3 4 5 6 7 8 9 end of chapter
- from gordon quilty
- organization development
Related searches
- sharepoint content type examples
- what are sharepoint content types
- sharepoint content type document template
- sharepoint 2013 content types list
- sharepoint create content type
- sharepoint site content types explained
- sharepoint create new content type
- sharepoint content type worksheet
- sharepoint content type vs metadata
- nd content standards social studies
- ca content standards history
- social science content standards california