Source: Based on Kerski, J - Central Michigan University
Common Questions about GPS
Source: Based on Kerski, J. 2004. Questions and Answers Regarding GPS, , accessed 10 July 2005.
1. Getting GPS to work properly
a. Choose either Universal Transverse Mercator System (UTM) or latitude/longitude.
b. Choose the correct datum. A datum describes the size and shape of the earth in reference to the coordinate system (lat/long, UTM, state plane) used to map the earth. Note that while the WGS 84 datum is commonly a default on many GPS units, USGS topographic maps are often NAD 27 unless indicated otherwise.
c. Select true north, magnetic north, or grid north.
Note that the vertical dimension, because of varying datums and satellite signal blockage will always be less accurate than the horizontal dimension. Don’t use recreational units for any decision involving elevation or altitude. Vertical elevations are often off by over 400 ft.
2. What is UTM?
a. Universal Transverse Mercator, which is based on the Mercator map projection.
b. Beginning at 180 degrees longitude, there are 60 UTM zones increasing in 6 degree increments.
c. Any UTM zone is divided into north and south zones.
d. The state of Michigan has two UTM zones, 16 N and 17 N.
e. On topographic maps, UTM grid marks are indicated with blue tic marks.
f. To eliminate the necessity for using negative numbers to describe a location, the east-west origin is placed 500,000 meters west of the central meridian. This is referred to as the zone’s ‘false origin’. The zone doesn't extend all the way to the false origin.
g. Discover the your UTM zone at Alan Morton’s (2005) UTM Grid Zones of the World (accessed 10 July 2005).
3. What are examples of how a position is reported completely and correctly?
a. Latitude/longitude – NAD 27 CONUS, 44 degrees, 16 minutes, 39 seconds north
b. UTM – WGS 84, zone 16 N, 330456 E, 4480111 N
c. UTM coordinates are read to the right and then up.
4. How much does a degree, minute, and second of latitude and longitude vary on the globe.
a. Latitude does not vary much. At 38 degrees north one degree of latitude equals about 69 miles, one minute, 6068 ft. and one second, 101 ft.
b. Longitude is highly variable depending on which line of longitude (parallel) is used. Values range from 0 at the north pole. At 38 degrees north one degree of longitude equals about 55 miles, one minute. 0.9 miles, and one second, 80 ft.
5. What most often explains discrepancies between map and GPS positions?
Differences in datums.
6. What is the accuracy of GPS units?
a. Low end units (less than $500) 30-60 ft
b. Mid range units ($4-5 K, with differential correction capability) 3 to 30 ft.
c. High end units($10-12 K, differential correction “on the fly”). Less than 3 ft
d. Survey grade instruments > $60 K cm to mm accuracy.
7. Should I set my GPS unit to magnetic or true north?
a. Select which “North” your GPS receiver will use as the zero degree reference. The default in your receiver is probably true north = 0 degrees. You can also select magnetic north = 0 degrees or grid north (north-south lines of the UTM grid) = 0 degrees. Many users select magnetic north as zero degrees to they can follow a compass bearing without converting the azimuth to true north. Many GPS units automatically calculate the local magnetic variation (declination) for the fix time and date
b.
8. What are the different coordinate systems in which GPS points are most often reported?
|Coordinate System |Abbreviation |Example |Can directly be imported into |
| | | |most GIS programs? |
|Universal Transverse Mercator |UTM |16 N, 330456 E, 4480111 N |yes |
|Decimal Degrees |d |58.65375° N, |yes |
| | |-158.65375° E (note that a | |
| | |negative sign is used for west | |
| | |longitude) | |
|Geographic Coordinates |GC |27° 30' 22" N, 99° 30' 26" W |No, should be converted to UTM |
| | | |or d |
|Decimal Minutes |DM |58 ° 39.645′ N, |No, should be converted to UTM |
| | |-128° 59.284 W |or d |
|Degrees Minutes Decimal Seconds |DMS |58° 39′ 13.5″ S, |No, should be converted to UTM |
| | |5° 05′ 99.5″ |or d |
|State Plane |SPC or SPCC |Easting 200487.391 m, Northing |yes |
| | |5204194.769 meters; Zone: 4205. | |
|Michigan GeoRef | | |yes with ARCGIS, yes in ArcView |
| | | |with free download |
9. How can I convert DM and DMS to d?
a. DM to d example: 58° 39.225′
d = 58° + 39.225°/60 = 58° + 0.65375° = 58.65375°
b. DMS to d example: D = 58° 39′13.5″
formula d = D + M/60 + s/3600
d = 58° + 39°/60 + 13.5°/3600 = 58° + 0.65° + 0.00375° = 58.65375°
Ans: 58.65375°
10. What web conversion programs exist for converting data between coordinate systems? State plane to
11. How do I know what zone I’m in if using UTM and State Plane Coordinate Zones? Michigan has three zones:
a. UTM: Morton, A. 2005, UTM zones of the world, , accessed 12 July 2005.
b. State Plane: Mentor, 1985, State Plane Codes, accessed 12 July 2005.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- tes element occurence form instructions
- christina friedle home
- gis introduction by david j buckey
- source based on kerski j central michigan university
- national geographic area coordination center website portal
- microsoft terraserver a spatial data warehouse
- introduction to mapping science
- mt kenya lu lc mapping lucid east africa
- topographic maps fort lewis college
Related searches
- based on or based upon
- based on versus based upon
- sum on excel based on specific word
- based on or based off
- based on vs based off
- based on or based upon grammar
- based on vs based upon
- based on or based from
- central michigan man stuff
- central washington university school code
- central washington university online courses
- central methodist university men s basketball