Draft Certification Guidelines for Less Than or Equal to 80 cc



ATTACHMENT 3

SMALL OFF-ROAD EVAPORATIVE EMISSION CONTROL SYSTEM CERTIFICATION

(Applicable to Engines/Equipment ( 80 cc engine displacement (2020 and later MYs))

Certification Summary Sheet

Date:

1. Model Year:

2a. Manufacturer:

2b. U.S. EPA-Assigned Manufacturer Code:

|2c) Manufacturer Contact Information |2d) Production Plant Location/Contact Information |

|Contact Name: |Contact Name: |

|Title: |Title: |

|Company Name: |Company Name: |

|Address: |Address: |

| | |

|Phone No.: |Phone No.: |

|Fax No.: |Fax No.: |

|Email: |Email: |

3. Evaporative Family Name:

4. Engine families within the evaporative family above:

| |

5. Process Code (e.g. New, Running Change):

6. Executive Order (For CARB Use Only):

|7. Confidential Information |

|a) Projected model year production volume (units) in California: _____ |

|b) Projected model year production volume (units) in U.S.: ______ |

|c) Date of expected introduction into California commerce: ______ |

8. Equipment Applications:

___ Backpack Blower ___ Go-Cart ___ Non-Backpack Blower

___ Brushcutter ___ Hedge Trimmer ___ Pressure Washer

___ Chainsaw ___ Ice Auger ___ Pump

___ Compressor ___ Leaf Blower/Vacuum ___ Snowblower

___ Edger ___ Line Trimmer ___ Stump Grinder

___ Generator Set ___ Log Splitter ___ Tiller

___ Other:______________ ___ Other:______________ ___ Other:______________

9. Bond Requirement:

Has the manufacturer submitted bond worksheet demonstrating compliance with the bond requirements of

13 CCR Section 2774 and associated bond if applicable? Yes/No _____

10. Evaporative Emission Control System

| |

|a) Describe the evaporative emission control system, including description of fuel tank types and fuel line types used (refer to CP-901 |

|amended September 18, 2017, Section 7 for the list of items to be submitted). Include a diagram of the evaporative emission control system. |

| |

|b) Fuel tank material (e.g. Metal, Coextruded, HDPE): |

| |

|c) Specify the criteria for selecting worst-case fuel tank model. |

| |

| |

| |

| |

| |

For CARB Use Only

| Processed By: | |Date Processed: | |Reviewed By: | |Date Reviewed: | |

Model Summary Sheet

(In #11, identify the fuel tank model exhibiting the highest permeation rate relative to the applicable permeation emission standard.)

| |

|11. |

|Worst |

|Case (Check One) |

27. Special Fuel Tank Test Equipment

|Description: |

|28a) |b) |c) |d) |Official Fuel Tank Permeation Test Results** |

|Test |Test Fuel Tank |Test No. |Type (Certification (CTG) or | |

|Fuel Tank ID |Model | |Confirmatory (RTG)) | |

| | | | |e) |f) |g) |

| | | | |Test |Fuel Tank Certification |Fuel Tank |

| | | | |Completion |Test Result |Permeation Emission Standard |

| | | | |Date |(g ROG·m2/day) |(g ROG·m2/day) |

| | | | | | | |

| | | | | | | |

| | | | | | | |

** Permeation rates must be reported to two significant digits.

29. Fuel Line Test Information

|a) New Testing? Yes/No _____ |

|b) Fuel Line Test Model: _____ |

|c) Test Fuel (e.g. LEV III gasoline): _____ |

|d) Test Procedure (e.g. SAE J1737, or SAE J30, or SAE J1527, or, only for fuel lines with inner diameter 4.75 mm or less, SAE J2996): |

|____________________________ |

|e) If carry over, which model year was the original certification permeation emissions test data submitted to |

|CARB: _________ and evaporative family:_________ |

|(Note: Per CP-901 amended September 18, 2017, Section 5.4, no carry across data allowed) |

|f) Alternative Test Procedure approval number: __________ |

|g) Fuel line material and permeation barrier: ____________________________________________ |

|h) Fuel line unique properties: _______________________________________________________________ |

30. Special Fuel Line Test Equipment

|Description: |

|31a) |b) |c) |d) |Official Fuel Line Permeation Test Results** |

|Test |Test Fuel Line |Test No. |Type (Certification (CTG) or | |

|Fuel Line ID |Model | |Confirmatory (RTG)) | |

| | | | |e) |f) |g) |

| | | | |Test |Fuel Line Certification |Fuel Line |

| | | | |Completion |Test Result |Permeation Emission Standard |

| | | | |Date |(g ROG·m2/day) |(g ROG·m2/day) |

| | | | | | | |

| | | | | | | |

| | | | | | | |

** Permeation rates must be reported to two significant digits.

32. Quality Assurance/Quality Control Protocols

Provide a description of any Quality Assurance/Quality Control (QA/QC) protocols used to ensure your production fuel tanks and fuel lines in the evaporative family comply with the applicable emission standards throughout their useful life.

Evaporative Component Parts Summary Sheet (≤ 80 cc)

|12. |20a. |21a. |

|Model |Fuel Tank |Fuel Line |

| |Part Number/ID(s) |Part Number/ID(s) |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| |

| |

| |

33. Additional information and Comments

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download