2018 Template



Victorian Purchasing GuideCPC Construction, Plumbing and Services Training PackageMarch 2019Release 4.0Victorian Purchasing GuideCPC Construction, Plumbing and Services Training PackageMarch 2019Release 4.0? State of Victoria (Department of Education and Training) 2019.Copyright of this material is reserved to the Crown in the right of the State of Victoria. This work is licensed under a Creative Commons Attribution-NoDerivs 3.0 Australia licence (more information is available here). You are free use, copy and distribute to anyone in its original form as long as you attribute Skills Victoria, Department of Education and Training (DET) as the author, and you license any derivative work you make available under the same licence.DisclaimerIn compiling the information contained in and accessed through this resource, the Department of Education and Training has used its best endeavours to ensure that the information is correct and current at the time of publication but takes no responsibility for any error, omission or defect therein.To the extent permitted by law, DET, its employees, agents and consultants exclude all liability for any loss or damage (including indirect, special or consequential loss or damage) arising from the use of, or reliance on the information contained herein, whether caused or not by any negligent act or omission. If any law prohibits the exclusion of such liability, DET limits its liability to the extent permitted by law, for the resupply of the information.Third party sitesThis resource may contain links to third party websites and resources. DET is not responsible for the condition or content of these sites or resources as they are not under its control.Third party material linked from this resource is subject to the copyright conditions of the third party. Users will need to consult the copyright notice of the third party sites for conditions of usage.Victorian Purchasing Guide - Version HistoryTraining Package ReleaseDate VPGApprovedCommentsCPC Construction, Plumbing and Services Training Package Release 4.15 March 2019This Victorian Purchasing Guide reflects the CPC Construction, Plumbing and Services Training Package Release 4. The Construction, Plumbing and Services Training Package Release 4 contains:One (1) revised qualification CPC30318 Certificate III in ConcretingTwo imported units updated to latest releases in CPC30116 Certificate III in Shopfitting:BSBSMB421 supersedes and equivalent to BSBSMB406MSFGG3036 supersedes and not equivalent to MSFGG3017CPC Construction,Plumbing and ServicesTraining PackageRelease 3.18 May2017This Victorian Purchasing guide reflects endorsement for the following units from Release 3: Two revised non-equivalent units of competency CPCCPB3014 Install bulk insulation and pliable membrane products CPCCPB3027 Install ceiling insulation products Endorsement for the following unit from Release 2.1 One revised equivalent unit of competency CPCCWHS1001 Prepare to work safely in the construction industry, superseding CPCCOHS1001A Work safely in the construction industry. Please note qualifications containing these units can be found in the CPC08 Training Package.CPC Construction, Plumbing and Services Training Package Release 2.9 November 2016This Victorian Purchasing guide reflects the changes made to CPC Construction, Plumbing and Services Training Package release 2.Two (2) revised qualifications:? CPC30116 Certificate III in Shopfitting? CPC30216 Certificate III in Signs and GraphicsThirty-seven new/revised units of competencyCPC Construction,Plumbing and ServicesTraining PackageRelease 1. 1 September 2015This Victorian Purchasing Guide reflects the CPC Construction, Plumbing and Services Training Package Release 1. The CPC Construction, Plumbing and Services Training Package Release 1 contains: One new Building Surveying qualifica0118tion: CPC80215 Graduate Diploma of Building SurveyingTwo revised qualifications: CPC60115 Advanced Diploma of Building Surveying CPC80115 Graduate Certificate in Fire Systems Design Management 34 new units of competency.Contents TOC \o "1-3" \h \z \u Victorian Purchasing Guide - Version History PAGEREF _Toc4397043 \h 2INTRODUCTION PAGEREF _Toc4397044 \h 5What is a Purchasing Guide? PAGEREF _Toc4397045 \h 5Registration PAGEREF _Toc4397046 \h 5QUALIFICATIONS PAGEREF _Toc4397047 \h 6UNITS OF COMPETENCY PAGEREF _Toc4397048 \h 7CONTACTS AND LINKS PAGEREF _Toc4397049 \h 12GLOSSARY PAGEREF _Toc4397050 \h 13INTRODUCTIONWhat is a Purchasing Guide?The Victorian Purchasing Guide (VPG) provides information for use by Registered Training Organisations (RTOs) in the provision of Victorian government subsidised training.Specifically, the VPG provides the following information related to the delivery of nationally endorsed Training Packages in Victoria:maximum payable hours available for each qualificationnominal hours for each unit of competency within the Training PackageRegistrationRTOs must be registered by either the Victorian Registration and Qualifications Authority (VRQA) or the Australian Skills Qualification Authority (ASQA) regulatory body to be eligible to issue qualifications and statements of attainment under the Australian Qualifications Framework (AQF).The VRQA is the regulatory authority in Victoria responsible for the registration of education and training providers in VET who provide courses to domestic students only and who offer training in Victoria only or Victoria and Western Australia only.To register to provide training to international students and in other Australian states and territories you will need to apply with ASQA. QUALIFICATIONSCodeTitleMinimum Payable HoursMaximum Payable HoursCPC30116Certificate III in Shop-fitting788829CPC30216Certificate III in Signs and Graphics790831CPC30318Certificate III in Concreting11441204CPC60115Advanced Diploma of Building Surveying22712390CPC80115Graduate Certificate in Fire Systems Design Management325340?UNITS OF COMPETENCYUnit CodeUnit TitleNominal HoursCPCCBS6001Research and evaluate construction methods and materials for residential buildings to three storeys250CPCCBS6002Research and evaluate construction methods and materials for commercial buildings to three storeys250CPCCBS6003Apply legal and ethical requirements to building surveying functions80CPCCBS6004Assess and advise on compliance of design documentation for residential buildings to three storeys120CPCCBS6005Assess and advise on compliance of design documentation for commercial buildings to three storeys90CPCCBS6006Process planning applications for residential buildings up to three storeys200CPCCBS6007Process planning applications for commercial buildings up to three storeys200CPCCBS6008Process building applications for residential buildings up to three storeys100CPCCBS6009Process building applications for commercial buildings up to three storeys120CPCCBS6010Conduct and report on building surveying audits of residential buildings up to three storeys100CPCCBS6011Conduct and report on building surveying audits of commercial buildings up to three storeys300CPCCBS6012Conduct and report on initial construction inspections of residential buildings up to three storeys120CPCCBS6013Conduct and report on initial construction inspections of commercial buildings up to three storeys120CPCCBS6014Conduct and report on advanced and final inspections of residential buildings up to three storeys80CPCCBS6015Conduct and report on advanced and final inspections of commercial buildings up to three storeys80CPCCBS6016Assess and advise on performance-based solutions for buildings up to three storeys90CPCCBS6017Monitor and advise on construction and compliance upgrade work on buildings up to three storeys90CPCCBS8001Manage building surveying risks and ensure compliance with ethical and professional standards120CPCCBS8002Manage information on construction methods, materials and services for a building surveying team80CPCCBS8003Manage information on compliance requirements for a building surveying team80CPCCBS8004Advise on compliance of building design documentation180CPCCBS8005Manage planning approval processes for all building types180CPCCBS8006Manage building approval processes for all building types120CPCCBS8007Monitor building work and advise on compliance issues60CPCCBS8008Conduct and manage the completion of building inspections and audits80CPCCBS8009Lead a building surveying team60CPCCBS8010Liaise and coordinate with head contractors on building projects60CPCCBS8011Assess and advise on performance-based solutions for all types of buildings300CPCCCA2003Erect and dismantle formwork for footings and slabs on ground24CPCCCA3001Carry out general demolition of minor building structures32CPCCCM1012Work effectively and sustainably in the construction industry20CPCCCM1013Plan and organise work20CPCCCM1014Conduct workplace communication20CPCCCM1015Carry out measurements and calculations20CPCCCM1016Identify requirements for safe tilt-up work8CPCCCM2001Read and interpret plans and specifications36CPCCCM2006Apply basic levelling procedures8CPCCCM2007Use explosive power tools16CPCCCM2008Erect and dismantle restricted height scaffolding40CPCCCM2010Work safely on scaffolding higher than two metres8CPCCCM3001Operate elevated work platforms up to 11 metres32CPCCCM3003Work safely around electrical sources, services and assets40CPCCCM3004Identify and apply information in construction plans, drawings and specifications30CPCCCM3005Calculate costs of construction work20CPCCCM3006Carry out levelling operations24CPCCCO2021Handle concreting materials24CPCCCO2022Select, check and maintain concreting plant, tools and equipment80CPCCCO3035Assess and specify concrete supply requirements56CPCCCO3036Plan concrete work and brief team40CPCCCO3041Place concrete188CPCCCO3042Finish concrete180CPCCCO3043Cure concrete16CPCCCO3044Apply decorative finishes to concrete40CPCCCO3046Repair and rectify concrete36CPCCCO3047Cut and core concrete16CPCCCO3048Construct tilt panels on site44CPCCCO3049Apply and finish sprayed concrete16CPCCCO3050Carry out high performance concreting16CPCCCO3051Conduct off-form vertical concrete operations32CPCCCO3052Conduct concrete boom delivery operations160CPCCCO3053Slump test concrete40CPCCCO3054Operate concrete agitator trucks40CPCCCO3055Install topping slabs20CPCCJN3001Process materials to produce components using static machines56CPCCLBM3001Licence to operate a concrete placing boom170CPCCLHS3001A Licence to operate a personnel and materials hoist32CPCCLSF2001A Licence to erect, alter and dismantle scaffolding basic level40CPCCPB3014Install bulk insulation and pliable membrane products25CPCCPB3027Install ceiling insulation products30CPCCSF2003Cut and bend materials using oxy-LPG equipment20CPCCSF2004Place and fix reinforcement materials80CPCCSF3001Apply reinforcement schedule16CPCCSG3001Design and lay out digital signs for production60CPCCSG3002Produce and apply vinyl signs50CPCCSG3003Colour manage signs20CPCCSG3004Print digital signs60CPCCSG3005Engrave signs40CPCCSG3006Apply gilding to signs40CPCCSG3007Paint lines and scrolls48CPCCSG3008Hand draw chalkboards and showcards36CPCCSG3009Screen-print signs36CPCCSG3010Hand render pictorials36CPCCSG3011Install LED technology into signs50CPCCSG3012Fabricate signs65CPCCSG3013Paint letters and decorative effects for signs92CPCCSG3014Manufacture gas-charged glass-formed illuminated signs200CPCCSG3015Produce airbrushed signs20CPCCSG3016Prepare surfaces for signs20CPCCSG3017Erect and install signs30CPCCSH3001Fabricate shopfitting components using CNC machines60CPCCSH3002Fabricate and assemble shopfront structures90CPCCSH3003Assemble and install shopfront structures40CPCCSH3004Assemble internal shopfitting units and prepare for transport80CPCCSH3005Apply and trim decorative additions to shopfittings and components40CPCCSH3006Prepare shopfittings and surfaces and apply liquid finishes40CPCCSH3007Install prefabricated internal shopfitting units35CPCCSH3008Install internal shop walls and fixtures70CPCCSH3009Demolish shopfronts and bulkheads30CPCCSH3010Prepare shop floors for new coverings40CPCCWC3004Install suspended ceilings40CPCCWHS1001Prepare to work safely in the construction industry6CPCCWHS2001Apply WHS requirements, policies and procedures in the construction industry20CPCCWHS3001Identify construction work hazards and select risk control strategies30CPCMCM8001Plan and manage complex projects60CPCMCM8002Manage the quality of projects and processes80CPCSFS8001Define scope of and initiate special hazard fire systems design projects140CPCSFS8002Analyse, design and evaluate complex special hazard fire systems80CPCSFS8003Develop and submit tenders for fire systems design solutions60?CONTACTS AND LINKSCurriculum Maintenance Manager (CMM)Construction, Plumbing and ServicesThe CMM Service is provided by Executive Officers, across all industry areas covered by Training Packages.They can assist with questions on payable and nominal hours.Teresa SignorelloAddress: PO Box 42, Holmesglen, Victoria Australia 3148Phone: 03 9564 1987Email: teresa.signorello@holmesglen.edu.auWebsite for the Victorian State Government Education and Training website can be found here.Service Skills Organisations ( SSO)Artibus InnovationThis SSO is responsible for developing this CPC Construction, Plumbing and Services Training Package, companion volumes and support material and can be contacted for further information.Address: Level 1, 373 Elizabeth Street, North Hobart, TAS 7000 AustraliaPhone: 03 6218 2841Artibus Innovation’s website can be found here.National Register for VET in .au (TGA)TGA is the Australian governments’ official National Register of information on Training Packages, Accredited Courses, qualifications, units of competency and RTOs.National Register website can be found here.Australian GovernmentDepartment of Education and TrainingThe Commonwealth Department is responsible for national policies and programmes that help Australians access quality vocational education and training.The Commonwealth Department of Education and Training website can be found here.Victorian State GovernmentDepartment of Education and Training (DET)DET is responsible for funding and the implementation of Vocational Education and Training (VET) in Victoria, including Apprenticeships and Traineeships policy.(03) 9637 2000The Victorian Department of Education and Training website can be found here.National VET Regulatory AuthorityAustralian Skills Quality Authority (ASQA)ASQA is the national regulator for Australia’s VET line: 1300 701 801 ASQA’s website can be found here.Victorian State VET Regulatory AuthorityVictorian Registration and Qualifications Authority (VRQA)The VRQA is a statutory authority responsible for the registration and regulation of Victorian RTOs and for the regulation of apprenticeships and traineeships in Victoria.(03) 9637 2806 VRQA’s website can be found here.GLOSSARYCodeNationally endorsed Training Package qualification code.TitleNationally endorsed Training Package qualification title.Unit CodeNationally endorsed Training Package unit of competency code.Unit TitleNationally endorsed Training Package unit of competency title.Maximum Payable HoursThe maximum number of hours the Victorian Government will subsidise under the Victorian Training Guarantee for the achievement of the minimum realistic vocational outcome of the qualification, as determined by the qualification packaging rules. The Maximum Payable Hours do not cover every possible combination of core and elective units available for a specific qualification.Nominal HoursNominal hours reflect the anticipated time taken to deliver and assess the outcomes of a unit of competency excluding unsupervised delivery or the time taken for repeated practical application of skills. Nominal hours are determined by the Victorian State Training Authority (DET) and are primarily developed for funding purposes in Victoria. Enquiries regarding nominal hours should be sent to this email ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download