Makecpt - Guilford Geo



makecpt

makecpt 3.3.4 - Make GMT color palette tables

usage: makecpt [-C] [-I] [-T | -T] [-V] [-Z]

OPTIONS:

-C Specify a colortable [Default is rainbow]:

[Default min/max values for -T are given in brackets]

---------------------------------

cool : Linear change from blue to magenta [0/1]

copper : Dark to light copper brown [0/1]

gebco : Colors for GEBCO bathymetric charts [-7000/0]

globe : Colors for global bathy-topo relief [-10000/10000]

gray : Grayramp from black to white [0/1]

haxby : Bill Haxby's colortable for geoid & gravity [0/32]

hot : Black through red and yellow to white [0/1]

jet : Dark to light blue, white, yellow and red [0/1]

no_green : For those who hate green [-32/+32]

ocean : white-green-blue bathymetry scale [-8000/0]

polar : Blue via white to red [-1/+1]

rainbow : Rainbow colors: magenta-blue-cyan-green-yellow-red [0/300]

red2green : Polar scale from red to green via white [-1/+1]

relief : Wessel/Martinez colortable for bathymetry/topography [-8000/+8000]

topo : Sandwell-Anderson colors for topography [-7000/+7000]

sealand : Smith bathymetry/topography scale [-6000/+3000]

seis : R-O-Y-G-B seismic tomography colors [-1/+1]

split : Polar scale like polar, but via black instead of white [-1/+1]

wysiwyg : 20 RGB colors for openwin -cubesize large and waxenvy printer [0/20]

---------------------------------

-I reverses the sense of the color table

-T Give start, stop, and increment for colorscale in z-units, or filename with custom z-values

If not given, the range in the master cptfile is used

-V Run in verbose mode [OFF].

-Z will create a continuous color palette.

[Default is discontinuous, i.e., constant color interval

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download