SECTION 084213 - Avanti Systems USA
Copyright 2016 by The American Institute of Architects (AIA)
This Product MasterSpec Section modifies the original MasterSpec text and does not include the full content of the original MasterSpec Section.
Revisions made to the original MasterSpec text are made solely by the Licensee and are not endorsed by, or representative of the opinions of, ARCOM or The American Institute of Architects (AIA). Neither AIA nor ARCOM are liable in any way for such revisions or for the use of this Product MasterSpec Section by any end user. A qualified design professional should review and edit the document to suit project requirements.
For more information, contact Avanti Systems, Inc., 200 Pemberwick Rd., Greenwich, CT 06831; Phone: (877) 282-6843; Fax: (914) 934-5992; Website: ; Email: sales@.
For information about MasterSpec, contact ARCOM at (800) 424-5080 or visit .
SECTION 084213 - ALUMINUM-FRAMED ENTRANCES
TIPS:
To view non-printing Editor's Notes that provide guidance for editing, click on MasterWorks/Single-File Formatting/Toggle/Editor's Notes.
To read detailed research, technical information about products and materials, and coordination checklists, click on MasterWorks/Supporting Information.
Revise this Section by deleting and inserting text to meet Project-specific requirements.
1. RELATED DOCUMENTS
Retain or delete this article in all Sections of Project Manual.
A.
2. SUMMARY
A. Section Includes:
1. Manual-swing entrance doors.
3. PREINSTALLATION MEETINGS
Retain "Preinstallation Conference" Paragraph below if Work of this Section is extensive or complex enough to justify a conference.
A.
If needed, insert list of conference participants not mentioned in Section 013100 "Project Management and Coordination."
4.
A. Product Data: For each type of product.
1. Include construction details, material descriptions, dimensions of individual components and profiles, and finishes.
B. Sustainable Design Submittals:
"Product Data" Subparagraph below applies to LEED 2009 NC, CI, and CS; LEED v4; IgCC; ASHRAE 189.1; and Green Globes. Coordinate with requirements for sealants.
1.
"Laboratory Test Reports" Subparagraph below applies to LEED 2009 for Schools, LEED v4, IgCC, ASHRAE 189.1, and Green Globes. Coordinate with requirements for sealants.
2.
"Product Certificates" Subparagraph below applies to LEED 2009, Materials and Resources Credit 5, "Regional Materials."
3.
Retain first three subparagraphs below to be eligible for LEED v4 credit. See the Evaluations.
4.
"Health Product Declaration" Subparagraph below applies to LEED v4 (all) MR Credit, "Building Product Disclosure and Optimization - Material Ingredients, Option 1 - Material Ingredient Reporting." Confirm with manufacturer that HPDs are available and meet requirements of the HPD Open Standard or approved USGBC program.
5.
Retain "Environmental Product Declaration" Subparagraph below if products specified in the Section are required to have an EPD to meet the IgCC's requirement of 55 percent recycled materials.
6.
Subparagraphs below apply to Green Globes if products specified in the Section are used to meet the requirements of 3.5.2 "Interior Fit-out (including Finishes and Furnishings) - Path B," which requires that a certain percentage of the materials used in the interior fit-out have EPDs, third-party certifications, and/or third-party life-cycle assessments.
7.
8. Third-Party Certifications: For each product.
9. Third-Party Certified Life-Cycle Assessment: For each product.
C. Shop Drawings: For aluminum-framed entrances. Include plans, elevations, sections, full-size details, and attachments to other work.
1. Include details of provisions for assembly, showing the following:
a. Joinery.
b. Anchorage.
c. Glazing.
2. Include point-to-point wiring diagrams showing the following:
a. Power requirements for each electrically operated door hardware.
b. Location and types of switches, signal device, conduit sizes, and number and size of wires.
Retain "Samples for Initial Selection" and "Samples for Verification" paragraphs below for two-stage Samples.
D.
E. Samples for Verification: For each type of exposed finish required, in manufacturer's standard sizes.
F. Entrance Door Hardware Schedule: Prepared by or under supervision of supplier, detailing fabrication and assembly of entrance door hardware, as well as procedures and diagrams. Coordinate final entrance door hardware schedule with doors, frames, and related work to ensure proper size, thickness, hand, function, and finish of entrance door hardware.
5. INFORMATIONAL SUBMITTALS
Coordinate "Qualification Data" Paragraph below with qualification requirements in Section 014000 "Quality Requirements" and as may be supplemented in "Quality Assurance" Article.
A.
B. Sample Warranties: For warranties.
6. CLOSEOUT SUBMITTALS
A. Maintenance Data: For aluminum-framed entrances to include in maintenance manuals.
7. QUALITY ASSURANCE
A. Installer Qualifications: An entity that employs installers and supervisors who are trained and approved by manufacturer.
8. WARRANTY
When warranties are required, verify with Owner's counsel that warranties stated in this article are not less than remedies available to Owner under prevailing local laws.
A.
1. Warranty Period: Two years from date of Substantial Completion.
PRODUCTS
Manufacturers and products listed in SpecAgent and MasterWorks Paragraph Builder are neither recommended nor endorsed by the AIA or ARCOM. Before inserting names, verify that manufacturers and products listed there comply with requirements retained or revised in descriptions and are both available and suitable for the intended applications. For definitions of terms and requirements for Contractor's product selection, see Section 016000 "Product Requirements."
1.
Retain "Basis-of-Design Product" Paragraph and list of manufacturers below to identify a specific product or a comparable product from manufacturers listed. Retain option(s) if manufacturer's name and model number are indicated on Drawings.
A.
1. DORMA USA, Inc.
2. Nana Wall Systems, Inc.
3. ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.