Maintaining a Constant DC Power Supply
Maintaining a Constant DC Power SupplyLuis GarciaApril 2, 2010Team 3Abstract Energy dissipated in an electrical or electronic circuit or device per unit of time is known as the electrical power (electrical power is usually measured in watts). Electrical energy supplied by a current to an appliance enables it to do work witch could provide some other form of energy. The difficult part will be manipulating the electrical power to only output the power needed to power a certain component. Transformers and voltage regulators could be a reliable form of manipulation to the power that needs to be outputted. Objective To have a constant output voltage from either an AC power supply or a DC powersupply. Also converting an AC power supply to a DC power supply in order to simplify the system. Introduction Power is an essential part in today’s world. Power is needed by everyone to run televisions, printers, computers, cars, etc. If different constant power supplies could be implemented from just one source of power, then people could run what they need at the power they need. First we need to know that power is equal to voltage multiplied by current. Current comes in either AC or DC and most circuits use DC to be able to run. Having a simple transformer could turn my AC source into a DC source. BackgroundThe power that arrives at someone household travels as AC (alternating current). On the other hand there is DC (direct current). DC is very useful since the output voltage is steady witch is applied to the circuits. Most components at someone’s house hold runs on DC, but AC is what arrives at the wall sockets. Once someone plugs a plug to their wall socket a AC to DC conversion is made. PST - SP24ASA PST - SP24AS is a transformer that converts an AC signal to a DC signal. This transformer in particular takes a range of 85 volts AC to 265 volts AC and outputs a steady 24 volts DC. Figure 1: PST - SP24ASLinear RegulatorsThe LM7805 is a voltage regulator that takes a DC voltage (in a range of up to 30 volts and gives a constant 5 volts DC. This is a very simple and great component since it is very simple to implement. Figure 2: LM7805L7815CV is another voltage regulator and both LM7805 and L7815CV look the same and work the same. The only difference is that one outputs a 5 volts DC and the other outputs a 15 volts DC. ConclusionThe final design will have linear voltage regulators and a transformer, basically AC voltages will be converted to DC with the transformer. Once in DC the linear voltage regulators will be implemented to have a constant voltage output and our components will be able to run. The whole system will not take much space and will be very easy to implement. ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.