U-center User guide
[Pages:74]u-center
GNSS evaluation software for Windows
User guide
Abstract
This document leads you through the efficient use of the u-center evaluation software, the powerful and easy to use tool from u-blox for evaluating, performance analysis and configuration of u-blox GNSS positioning chips and modules.
u- UBX-13005250 - R30 C1-Public
u-center - User guide
Document information
Title Subtitle Document type Document number Revision and date Document status Disclosure restriction
u-center
GNSS evaluation software for Windows
User guide
UBX-13005250
R30
24-May-2022
Production information
C1-Public
This document applies to the following products:
Product name
u-center
Type number
Firmware version
PCN reference
u-blox or third parties may hold intellectual property rights in the products, names, logos and designs included in this document. Copying, reproduction, modification or disclosure to third parties of this document or any part thereof is only permitted with the express written permission of u-blox.
The information contained herein is provided "as is" and u-blox assumes no liability for its use. No warranty, either express or implied, is given, including but not limited to, with respect to the accuracy, correctness, reliability and fitness for a particular purpose of the information. This document may be revised by u-blox at any time without notice. For the most recent documents, visit u-.
Copyright ? 2022, u-blox AG.
UBX-13005250 - R30 C1-Public
Production information
Page 2 of 74
u-center - User guide
Contents
1 Preface.......................................................................................................................................5
1.1 Overview.................................................................................................................................................... 5 1.2 Using this guide.......................................................................................................................................5 1.3 Technical support....................................................................................................................................5
1.3.1 Worldwide Web............................................................................................................................... 5 1.3.2 By email............................................................................................................................................ 5 1.3.3 Helpful information when contacting technical support....................................................... 5
2 Features.................................................................................................................................... 7
3 Getting started...................................................................................................................... 8
3.1 General information about displayed values..................................................................................... 8 3.2 Connecting an u-blox evaluation kit to the PC................................................................................. 8 3.3 Installing u-center................................................................................................................................... 8 3.4 Connect to the receiver......................................................................................................................... 9
3.4.1 Select the port................................................................................................................................ 9 3.4.2 Select the baud rate (only for COM ports)................................................................................9
4 Concept and philosophy................................................................................................... 11
4.1 Color and satellite coding scheme....................................................................................................12 4.2 Operating modes.................................................................................................................................. 13
4.2.1 Online mode.................................................................................................................................. 14 4.2.2 Stop mode..................................................................................................................................... 14 4.2.3 Record mode................................................................................................................................. 14 4.2.4 Play mode.......................................................................................................................................14 4.2.5 Relations between modes..........................................................................................................14 4.2.6 Database limitations................................................................................................................... 15 4.2.7 Receiver information................................................................................................................... 16
5 u-center menus and windows......................................................................................... 17
5.1 Main frame and toolbars.....................................................................................................................17 5.1.1 Standard menu bar..................................................................................................................... 17 5.1.2 Standard toolbar.......................................................................................................................... 26 5.1.3 Views toolbar................................................................................................................................ 26 5.1.4 Communication toolbar.............................................................................................................. 26 5.1.5 Logfile toolbar............................................................................................................................... 26 5.1.6 Action toolbar............................................................................................................................... 27 5.1.7 Standard statusbar..................................................................................................................... 27
5.2 Views and windows.............................................................................................................................. 28 5.2.1 Packet console..............................................................................................................................28 5.2.2 Binary console...............................................................................................................................29 5.2.3 Text console.................................................................................................................................. 30 5.2.4 Icons and text field of console views....................................................................................... 31 5.2.5 Regular expression evaluation.................................................................................................. 31 5.2.6 Messages view..............................................................................................................................33 5.2.7 Generation 9 configuration view...............................................................................................35 5.2.8 Statistic view................................................................................................................................ 38
UBX-13005250 - R30 C1-Public
Contents Production information
Page 3 of 74
5.2.9 Table view...................................................................................................................................... 39 5.2.10 Map view......................................................................................................................................40 5.2.11 Chart view................................................................................................................................... 46 5.2.12 Histogram view...........................................................................................................................49 5.2.13 Camera view................................................................................................................................51 5.2.14 Deviation map.............................................................................................................................51 5.2.15 Sky view....................................................................................................................................... 53
6 NTRIP...................................................................................................................................... 54
6.1 NTRIP client........................................................................................................................................... 54 6.2 NTRIP server/caster............................................................................................................................. 55
7 MQTT.......................................................................................................................................57
7.1 MQTT client........................................................................................................................................... 57
8 Google Earth server............................................................................................................59
9 Tools........................................................................................................................................ 61
9.1 Firmware update................................................................................................................................... 61 9.2 Legacy Firmware update u-blox 5 - 8............................................................................................... 63 9.3 Dump receiver diagnostics................................................................................................................. 64 9.4 GNSS configuration..............................................................................................................................64
9.4.1 Read/Write configuration files.................................................................................................. 65 9.4.2 Editing configuration file............................................................................................................ 65 9.5 Preferences.............................................................................................................................................66
10 How To..................................................................................................................................67
10.1 Change baud rate of receiver.......................................................................................................... 67 10.2 Save parameters to receiver non-volatile memory (BBR/Flash)............................................... 67
10.2.1 Saving parameters with UBX-CFG-CFG................................................................................67 10.2.2 Saving parameters with GNSS configuration......................................................................68 10.3 Recording/Playing a log file.............................................................................................................. 68 10.4 Conduct sensitivity tests................................................................................................................. 68 10.5 Read/Write configuration files.........................................................................................................69 10.6 Set GNSS configuration....................................................................................................................69 10.7 Change epoch detection method................................................................................................... 69
11 Troubleshooting................................................................................................................ 71
Related documents................................................................................................................ 72
Revision history....................................................................................................................... 73
u-center - User guide
1 Preface
1.1 Overview
u-center is u-blox's powerful GNSS evaluation and visualization tool which can be downloaded freeof-charge from our website (u-). This user guide provides a description of the features of this software. It allows end users to assess and test u-blox GNSS positioning chips and modules for navigation and positioning performance.
The purpose of u-center is to enable users to: ? Conduct performance tests on u-blox and other GNSS devices. ? Configure u-blox GNSS positioning chips and modules. ? Update the firmware on GNSS modules. ? Test the added performance provided by u-blox's AssistNow service.
1.2 Using this guide
This guide assumes that the user has basic computer skills and is familiar with the Windows Graphical User Interface (GUI) and GNSS receiver environments.
The following symbols are used to highlight important information: An index finger points out key information pertaining to integration and performance.
A warning symbol indicates actions that could negatively impact u-center behavior.
1.3 Technical support
If you have questions about installing or using u-center: ? Read this user guide carefully. ? Check our homepage () to ensure that your GNSS device, firmware and
the u-center software are the latest versions. ? Refer to our web based information service.
1.3.1 Worldwide Web
Our website (u-) is a rich pool of information. Product information and technical documents can be accessed 24/7.
1.3.2 By email
If you have technical problems or cannot find the required information in the provided documents, contact the closest technical support office. To ensure that we process your request as soon as possible, use our service pool email addresses rather than personal staff email addresses. Contact details are at the end of the document.
1.3.3 Helpful information when contacting technical support
When contacting technical support, have the following information ready: ? Receiver type (e.g. NEO-M9N), firmware version (e.g. FW SPG 4.04), u-center release (e.g. u-
center 21.09). ? Receiver configuration and short description of the application.
UBX-13005250 - R30 C1-Public
1 Preface Production information
Page 5 of 74
? Your complete contact details.
u-center - User guide
UBX-13005250 - R30 C1-Public
1 Preface Production information
Page 6 of 74
u-center - User guide
2 Features
u-center evaluation software provides system integrators and end users with a quick and simple way to interface with u-blox GNSS chipsets, modules and boards. It enables easy evaluation, performance testing, development and debugging of GNSS positioning chips and modules. u-center allows easy connection to u-blox products and provides a suite of features to view, log, and analyze performance. The features include:
? Support for u-blox's receivers using u-blox positioning technology. u-center can communicate with these receivers using either the UBX protocol or the NMEA-0183 standard protocol.
? Support for receivers that utilize standard NMEA strings. ? u-center presents all the information collected during the operation of the GNSS device. All
aspects of GNSS data (position, velocity, time, satellite tracking, etc.) can be monitored and logged under various test scenarios for the evaluation of a receiver. u-center software allows analysis of the collected data in order to investigate performance issues such as accuracy, road test position and trajectory, satellite tracking, time to first fix, etc. All processed data can be captured in ASCII format and ported into popular spreadsheets for creating additional plots and statistics. ? Camera View: photographic data can be stored in the log file together with the navigation data and later be replayed in the application. ? Export data files to Google Earth and Google Maps. ? Supports (Multiple GNSS) AssistNow Online and AssistNow Offline. ? Data recording and playback function. ? Structural and graphical data visualization in real-time. ? Export functionality to standard PC applications. ? Docking views (real-time cockpit instruments): Satellite constellation, compass, clock, altimeter, speedometer, GNSS and satellite information views. ? Download firmware updates to GNSS positioning modules. ? Support for NTRIP server and NTRIP client functionality. ? Support for MQTT client functionality. ? Google Earth server support. ? SQLITE database support
UBX-13005250 - R30 C1-Public
2 Features Production information
Page 7 of 74
u-center - User guide
3 Getting started
3.1 General information about displayed values
? Longitude and latitude are displayed according to the datum selected in the GNSS device (either the default WGS-84 or based on user-defined parameters). This option can be polled and set using the configuration item group CFG-NAVSPG-USRDAT-*.
? Time is displayed with reference to UTC. ? Elevation is displayed with reference to either MSL (Height above Mean Sea Level or
Orthometric Height) or to HAE (Height Above WGS-84-Ellipsoid). The reference is controlled by the GNSS configuration.
3.2 Connecting an u-blox evaluation kit to the PC
This section assumes that you have purchased an u-blox evaluation kit. Should you try to connect a module or IC receiver directly to the PC, make sure you use appropriate RS-232 level shifters.
The evaluation kit can be connected to the PC by using either an USB or a serial cable. In case of using the USB port, a driver is required (installed by the u-center for Windows installer or downloadable from our homepage). Be sure to install the driver before connecting the evaluation kit to the computer.
3.3 Installing u-center
The installation program guides you through the necessary steps for a successful program installation. During the installation, you can choose the destination folder for the program.
u-center uses dynamic link libraries (DLL). The installation program will automatically install the required DLL's into the u-center program directory. Should you try to copy a u-center installation from one location to another after the installation, make sure you copy the DLL files as well. After a successful installation, u-center can be started from the Start Menu (All Programs > u-blox > u-center > u-center) and will start up as shown in Figure 1.
UBX-13005250 - R30 C1-Public
3 Getting started Production information
Page 8 of 74
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- applied mathematics xi xii term wise code 241 session
- u center user guide
- teqc tutorial unavco
- applied mathematics xi xii code 241 session 2021 22
- i executable and linkable format elf
- propagation delay circuit timing adder design
- mobile application security who how and why
- an a z index of the apple os x command line terminal