Bill Tobin has been a professional in Plastics for more ...



Bill Tobin has been a professional in Plastics for more than 30 years. Bill has written more than 20 books and 250+ published articles. He is a frequent presenter and trainer at conventions and professional functions. His consulting firm WJT Associates provides services in all areas of injection molding as well as expert witness testimony.

SEMINAR:

PROCESS OPTIMIZATION

The seminar will be a brief overview of applying Scientific Molding to the injection molding process and troubleshooting those pesky defects that still come up. The seminar will concentrate on improving process yields and getting the process right the first time. This is not a seminar where you have to remember everything or take notes and hope you can recall the information later.

Each attendee will get two valuable books written by the instructor: (1) SCIENTIFIC INJECTION MOLDING explaining the process in detail and including a CD allowing you to create your own Universal Spreadsheet. (2) TROUBLESHOOTING INJECTION MOLDED PARTS giving in depth explanation of the possible causes of molded defects.

You'll also learn

• How to make the same quality parts, at the same cycle time on different machines whether at your shop or another facility.

• Eliminating problems at the validation trial and not during production.

• Avoiding variations that will invalidate your PPAP, FDA etc. validations.

How to define

• Cosmetics

• Function

• Dimensions

• The Universal Definition of Quality

• “Acceptable Parts”

 WHO SHOULD ATTEND

-Those who have applied the Scientific Molding principles but still find variations in their processes (note: these can be fixed).

-Engineers, molding technicians, quality assurance people who want a hands-off, consistent quality continuous molding process.

-Management personnel who no longer want to hear about money-losing 'explainable variances' from a supposedly validated molding process. 

.

Expected Outcomes:

Optimized cycles times from the beginning

Maximum utilization of your equipment

A more professional workforce focused on productivity and profit

New tooling startups that don’t need to ‘be processed in’, or start with high scrap rates

Less miscommunication on standards

Learn how to do the experiments to OPTIMIZE your cycle;

• Setting the clamp pressure

• Setting the distances

• Optimizing fill

• Optimizing pack

• Optimizing cool

• Heat profiles

Construct a universal setup sheet that gives you the process settings automatically from one machine to another without having to start from scratch.

[pic]

Details

Tuition $300.00 each

Note: A minimum attendance must be achieved for the seminar to go forward. You will be notified by e-mail one week before as to the status. Credit cards will not be charge nor checks cashed until the seminar‘s minimum has been met.

8:30 AM to 4:30 PM Breaks and lunch (pizza) provided. Please arrive 8:15 - 8:30

INSTRUCTIONS: - FILL IN GREY CELLS, SAVE, E-MAIL

Process Optimization with Bill Tobin:

Seminar we will attend (from list below)      

|SEMINAR LOCATION |Cutoff date |Price |

|15 Sept, La Quinta Portland, 11207 Northeast Holman St, Portland OR 97220 |8-Sep |$300 |

|16 Sept Ramada SeaTac Airport, 16720 International Blvd, Sea Tac, WA 98188 |8-Sep |$300 |

|14 Oct Wellesley Inn-Atlanta Airport, 1377 Virginia Ave, East Point, GA 30344 |7-Oct |$300 |

Buy 3 get 4th Free

Instructions: Fill in information save file and email or Print file, Scan and e-mail

Note: A minimum attendance must be achieved for the seminar to go forward. You will be notified by e-mail one week before as to the status. Credit cards will not be charge nor checks cashed until the seminar‘s minimum has been met. (Visa or MasterCard preferred). You are advised against booking travel reservations until the class will go forward.

Name on credit card      

Card number            exp date       (mm/yy)      

CVV#      

Company       City       State     

Zip code     

Phone       e-mail      

So you can be contacted as to the status of the seminar

Date email sent (for cut-off date purposes)           

If you are concerned about giving your credit card information on the internet, send it in two separate e-mails.

e-mail - bill4012@ SUBJECT - MOLDING SEMINAR

Phone with questions 303 604 9592

Name of attendees Job Title Email

1.                 

2.                  

3.                  

4.                  

5.                   Use additional sheet if necessary     

-----------------------

[pic]

WHERE WHEN

15-Sep

La Quinta Portland

11207 NE Holman St

Portland, OR 97220

503-382-3820

16-Sep

Ramada SeaTac Airport

16720 International Blvd,

Sea Tac, WA 98188

206-277-0700

14-Oct

Wellesley Inn-Atlanta Airport

1377 Virginia Ave

East Point, GA 30344

(404) 762-5111

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download