*ACID Magic should not be used to aid or effect any pool ...

[Pages:1]How to Use

ACID Magic?

The User Friendly Muriatic Acid!TM*

*ACID Magic should not be used to aid or effect any pool disinfectant product or other water modifier.

?

NOW EVEN BETTER

Septic Systems

PROPER USE FOR SEPTIC SYSTEMS: We do not recommend pouring ACID Magic directly into a septic system. ACID Magic has a very low pH that is not ideal for bacteria in a septic system. Use at your own risk. However, after speaking to septic system companies and lab testing, the following are our suggestions:

READ INSTRUCTIONS IN THEIR ENTIRETY BEFORE PROCEEDING.

PRECAUTIONS: ? While using ACID Magic, protective eyewear and

gloves are always required. ? Active ventilation is required when working indoors. ? When diluting, ALWAYS add the ACID Magic

to water, NOT water to the ACID Magic. This eliminates the potential of an unwanted reaction that may cause dangerous splashing to occur. ? Do not apply to dry surfaces. Always wet surface prior to application, including any adjoining areas, in case of accidental spillage or overspray. ? Do not allow the surface to dry with ACID Magic solution on it. ? Use caution when applying ACID Magic to avoid contact with other surfaces, such as wood or metal, as an unwanted reaction and discoloration of surfaces could occur.

PROPER USE FOR SEPTIC SYSTEMS: Septic system companies recommend minimizing the amount of chemicals that you put down your drains. They even suggest spraying chemicals on surfaces to minimize how much you use. As ACID Magic is used, the chemicals that go to work are spent in the process and by the time it reaches the septic system, it is diluted along with the water used to do the job. More of the product's chemicals are used to clean PVC drains, further minimizing the amount of chemicals that actually reach the septic system. The best way to use ACID Magic for your toilet and to minimize its presence in a septic system:

DIRECTIONS: ? Do not drain your toilet. ? P our ACID Magic on a sponge (approximately

2 ounces) and wipe directly on the toilet walls. ? Let dwell for 3 to 5 minutes or longer depending on

the stain. ? Use a brush to scrub around the edges and where

staining occurs. ? Once the stain has been removed, neutralize the

solution.

NEUTRALIZING THE SOLUTION: ? Add three teaspoons (approximately 45 grams) of

baking soda, one teaspoon at a time, to the toilet bowl. ? U se a brush to stir the solution after each additional

teaspoon of baking soda. ? After adding the total amount of baking soda, flush

the solution down the drain. ? Flush once more. ? Make sure to use plenty of water after using ACID Magic.

For your safety, wear chemical resistant gloves and eye protection. You may wish to contact your local septic system company for further information. For additional directions and other uses, go to: ACIDMagic

AM HTU 6: Septic Systems 10/18

6120 East 58th Avenue ? Commerce City, CO 80022 ? (800) 843-3343 ?

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download