BWB17AV002 User Guide V1-6 20170906 EN
6-Device
BWB17AV002
User Guide
v1.6 (2017)
TABLE OF CONTENTS
? GETTING STARTED BATTERIES
02
? GETTING STARTED BUTTONS
03
? PROGRAMMING YOUR REMOTE DIRECT CODE ENTRY
05
? PROGRAMMING YOUR REMOTE AUTO CODE SEARCH
08
? FAVORITE CHANNELS
09
? VOLUME LOCK
10
? CHANNEL LOCK
11
? CODE IDENTIFICATION
12
? RESET TO FACTORY DEFAULT SETTINGS
13
? TROUBLESHOOTING
14
? FCC INFORMATION
15
? LIMITED 90 DAY WARRANTY
16
01
GETTING STARTED BATTERIES
Thank you for choosing the Blackweb Universal Remote Control. This remote control can operate a wide range of electronic devices, works across most brands and models, and comes pre-programmed to operate many Samsung TVs (see the Programming Your Remote sections if your device is not compatible). Your remote can control up to 6 devices and is remarkably easy to set up. To get started, please install two AAA alkaline batteries (not included) as shown below.
Installing the Batteries 1. Remove the battery cover.
2. Insert the batteries as shown.
3. Snap the battery cover back into place.
Battery Precautions ? Do not mix old and new batteries.
? Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
Two AAA alkaline batteries (not included)
? Always remove old, weak or wornout batteries promptly and recycle or dispose of them in accordance with local and national regulations.
Low Battery Indicator If while using the remote, the button's red indicator light flashes 3 times, this indicates the batteries need to be replaced. Please replace the batteries as soon as possible when this indication occurs.
Battery Cover
Code Saver When changing the batteries of your remote, please do so quickly. You have up to 20 minutes to change the batteries in your remote without losing the programmed codes.
Model: BWB17AV002/PCL-1 Customer Support: (877) 907-7010
Made in China
Your remote control's model number can be found in the battery compartment
Battery Saver To conserve battery power, the remote will automatically turn off if any button is pressed for more than 60 seconds (except during programming). This feature is helpful in the event that the remote is stuck in a location where the buttons remain depressed, such as between sofa cushions.
02
GETTING STARTED BUTTONS
POWER
INPUT
DEVICE CATEGORIES
SLEEP PROGRAM
MENU
NAVIGATION
BACK A, B, C, D BUTTONS
VOLUME CHANNEL
VIDEO PLAYBACK CONTROLS
NUMBER KEYPAD
INPUT
TV
SAT/CBL
B RAY/DVD
AMP
SLEEP
PROGRAM
STREAM AUX FAV
MENU
APPS
OK
BACK
EXIT
AB
+
VOL
CD
+
CH
CH
123
456
789
0
ENTER
FAVORITE CHANNELS APPS OK EXIT
MUTE INFO
PREVIOUS CHANNEL
NOTE: Some of the buttons on the remote may not be supported by your device. 03
GETTING STARTED BUTTONS
POWER Turns your device On/Off and also serves as an indicator when the remote is being programmed
INPUT
INPUT Switches between the sources connected to your TV
TV STREAM
AMP
SAT/CBL BRAY/DVD
AUX
DEVICE CATEGORIES Use these buttons to select the device you want to control
SLEEP
SLEEP
Activates and toggles the device's sleep timer
(if supported)
PROGRAM
PROGRAM Use to put your remote in programming mode
APPS
APPS Use to access your smart TV's apps (if supported)
BACK
BACK Return to the previous menu or screen
AB CD
A, B, C, D BUTTONS Use to access device shortcuts for additional features or custom apps on your device (if supported)
INFO Use to access on-screen content description and information
04
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- 22 001460 01 mant qsg wsl us s10 online alt
- how do i set up my roku streaming stick
- ticket 1282269 blocking of service
- video streaming faqs vizio
- bwb17av002 user guide v1 6 20170906 en
- ubee ddw365 wireless cable modem spectrum
- tv ears tv speaker installation guide
- xfinity tv channel lineup somerville massachusetts
- i580 user guide v1 0 20190521 en
- easy three step remote programming