Step 13: - Leeds School of Business



BCOR 2500Visio download instructionsStudent Instructions adding Visio to a Windows PC.Note: The free copy offered to students is for Windows only and will only run on an Apple running Windows XP, Vista or 7.Step 1:Locate the e-mail from: elms_support@e-?Step 2: Navigate to the website: 3:Click software and click on Visio Professional 2007 Step 4: Select Download and add to cartStep 5: enter your username from the e-mail sent to you from elms_support@e-?Step 6: Accept the AgreementStep 7: Click Check Out then Click Next Step 8: Under Item there is a link to download the file. Click on this linkStep 9: At this point you please write down your serial number.Step 9: Click download and save.Step 10: Click RunStep 11: Select your file location and click continueWait for the program to download. IMPORTANT PARTYou are downloading an ISO, an image of a CD. You will need a CD to burn this image.Step 12: Burn the image to a disk. Put a blank CD in your CD burning drive and then Double click on the new file you downloaded. Once the file burns run the setup on the CD you just created. If the file does not bur follow step 13. 13: How to Burn an ISO File to a DiscThe information on this page is provided to help you burn a CD or DVD from an ISO image file downloaded from the Microsoft Campus Agreement website. You must have software that supports creating a CD or DVD from an image file. If you try and simply copy the .ISO file onto a CD or DVD, it will not work.Tips for all programsYou cannot use Windows XP or Vista alone to burn an ISO image. ITS recommends that you use ISO Recorder Power Toy (see below). Always use a new blank disc. Close all other programs while burning to prevent errors. If you are unable to burn an ISO image file using these instructions, please consult the help files provided with your specific burning software. If you do not have the ability to burn a disc, contact the IT Service Center for assistance. After the disc has been burned, double-click on the disc and open the installer. Click here for Microsoft installation instructions. Using ISO Recorder Power Toy for Windows (Freeware)Download Alex Feinman's ISO Recorder Power Toy(Make sure to download the correct version of the software for your operating system). After installation, restart your computer. Right click the .iso file and select one of the following: Windows XP: Copy Image to CD. Windows Vista: Open with >> ISO Recorder. The ISO record window should come up. Select the drive in which the blank CD or DVD is located in, then select Next. The CD or DVD should begin to record. After the disc has been burned, open My Computer and double-click on the disc. From there, start the installation. ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download