ARCAT | Free Building Product CAD Details, BIM, Specs and …

 SECTION 10 74 13 - Exterior ClocksMANUFACTURED EXTERIOR SPECIALTIESDisplay hidden notes to specifier. (Don't know how? Click Here) Copyright 2010 - 2011 ARCAT, Inc. - All rights reserved** NOTE TO SPECIFIER ** Mar-Flex Waterproofing & Building Products; waterproofing systems and basement products..This section is based on the products of Mar-Flex Waterproofing & Building Products, which is located at:P. O. BOX 8256 500 Business Pkwy.Carlisle, OH 45005Toll Free Tel: 800-498-1411Tel: 513-422-7285Fax: 513-422-7282Email: request info (info@mar-)Web: mar- [ Click Here ] for additional information.For over 20 years, Mar-flex has helped make basements safer and drier with waterproofing systems and basement products for lower level living.We manufacture premium products for commercial, multi-family and residential construction and our research labs continuously develop new solutions to keep pace with changing codes, regulations and markets.

GENERAL

SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

Window wells.

Emergency egress window wells.

RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

Section 31 20 00 - Earth Moving.

Section 03 30 00 - Cast-in-Place Concrete.

Section 04 22 23.29 - Split-Face Concrete Unit Masonry.

Section 07 11 16 - Cementitious Dampproofing.

Section 07 14 00 - Fluid-Applied Waterproofing.

Section 07 60 00 - Flashing and Sheet Metal.

SUBMITTALS

Submit under provisions of Section 01 30 00 - Administrative Requirements.

Product Data: Manufacturer's data sheets on each product to be used, including:

Preparation instructions and recommendations.

Storage and handling requirements and recommendations.

Installation methods.

Quality Assurance/Control Submittals: Submit the following

Certificates: Submit certificate that applicator complies with requirements of this section.

** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.

Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.

Verification Samples: For each finish product specified, two samples representing actual product, color, and patterns.

QUALITY ASSURANCE

Installer shall be responsible for complying with code and approvals by the Authority Having Jurisdiction (AHJ).

** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.

Finish areas designated by Architect.

Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.

Refinish mock-up area as required to produce acceptable work.

DELIVERY, STORAGE, AND HANDLING

Store products in manufacturer's unopened packaging until ready for installation.

Storage and Protection: Store materials protected from exposure to harmful environmental conditions and at temperature and humidity conditions recommended by the manufacturer.

PROJECT CONDITIONS

Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

WARRANTY

Manufacturer's Warranty: Limited Lifetime Warranty.

PRODUCTS

MANUFACTURERS

Acceptable Manufacturer: Mar-Flex Waterproofing & Building Products, which is located at: P. O. BOX 8256 500 Business Pkwy.; Carlisle, OH 45005; Toll Free Tel: 800-498-1411; Tel: 513-422-7285; Fax: 513-422-7282; Email: request info (info@mar-); Web: mar-

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

Substitutions: Not permitted.

Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

** NOTE TO SPECIFIER ** Landscapes? No-Maintenance Window Wells add more natural light than traditional window wells, enhancing the value of a home. Add the Window Well Cover, and homeowners will appreciate the increased safety and elimination of weeds and pests. These window wells color-coordinate with Lifelines Egress Window Wells, for a complete window system solution. Plus, they won't rust or dent like metal. Limited Lifetime Warranty. Delete if not required.

WINDOW WELLS

Product: Mar-flex Landscapes No Maintenance Window Wells as manufactured by Mar-flex Waterproofing & Building Products.

** NOTE TO SPECIFIER ** Delete size not required.

Size: Small - 46 inches width by 17 inches projection by 21 inches height (1168 mm by 432 mm by 533 mm).

** NOTE TO SPECIFIER ** Delete color not required.

Color: White (Item no. WW-42052).

Color: Granite (Item no. WW-42058).

Color: Sandstone (Item no. WW-42056).

Size: Large - 52 inches width by 19 inches projection by 31 inches height (1321 mm by 483 mm by 787 mm).

** NOTE TO SPECIFIER ** Delete color not required.

Color: White (Item no. WW-42100).

Color: Granite (Item no. WW-42115).

Color: Sandstone (Item no. WW-42110).

** NOTE TO SPECIFIER ** Delete optional cover if not required.

Accessories:

Provide window well cover - Small (Item no. WW-42140).

Provide window well cover - Large (Item no. WW-42145).

Product: Standard Round Metal Area Wells.

** NOTE TO SPECIFIER ** Standard metal wells are rounded on corners for extra safety. Stamped from single sheet metal. Deep corrugation stiffens against back fill. Delete if not required.

Size: 37 inches width x 16 projection x12 inches nominal height(Item no. WWG-00012).

Size: 37 inches width x 16 projection x 18 inches nominal height (Item no. WWG-00018).

Size: 37 inches width x 16 projection x 24 inches nominal height (Item no. WWG-00024).

Size: 37 inches width x 16 projection x 30 inches nominal height (Item no. WWG-00030).

Size: 37 inches width x 16 projection x 36 inches nominal height (Item no. WWG-00036).

** NOTE TO SPECIFIER ** Delete optional grate if not required.

Accessories Provide Area Well Grate (Item no. - WWGR-00100).

** NOTE TO SPECIFIER ** Mar-flex Lifelines Egress Window Wells feature built-in handrails and steps so homeowners can escape quickly and easily in case of a fire, flood, tornado or other life-threatening emergency. Designed to meet basement building codes for below-grade living space egress, these window wells are available in various models and sizes - and include a hardware installation kit. Limited Lifetime Warranty. Delete if not required.

EMERGENCY EGRESS WINDOW WELLS - GENERAL

Design Requirements:

Dimensions of window wells shall be in accordance with Section 1025.5.1 of the IBC and Section R310.2 of the IRC. Ladders or steps shall be provided in accordance with Section 1025.5.2 of the IBC and Section R310.2.1 of the IRC.

Ladder rungs shall be designed for a minimum load of 300 pounds (136 kg) applied on a maximum 4-inches (102 mm) wide section located at the center of the ladder rung and the edge of the ladder rung. The ladder rungs need not be designed for both loads occurring simultaneously.

Window wells shall be provided with an opening cover. The cover shall be designed in accordance with the applicable code to support a minimum live load of 40 pounds per square foot (195 kg/m2). The cover shall be operable from within the window well without the use of tools or special knowledge, and shall require no more than 30 pounds (13.6 kg) of force to fully open.

All components and materials from which the window well is constructed shall be corrosion-resistant.

EMERGENCY EGRESS WINDOW WELLS

** NOTE TO SPECIFIER ** Mar-flex Modular Egress Wells is a modular system that can be adjusted to exact height needed. Each piece interlocks and then mounts to the exterior foundation wall. Each module features a built-in ladder to provide an easier exit. Meets all building codes for below-grade second egress. Won't rust or dent. Fits 32 inches (813mm) to 48 inches (1219 mm) wide slider or casement window. Includes a hardware installation kit. Limited Lifetime Warranty. Delete if not required.

Product: ModularWells Modular Egress Window Wells as manufactured by Mar-flex Waterproofing & Building Products. A modular system adjusts the egress window well to the exact height needed. Install kit included.

Size: Starting with 21 inches (533 mm) high base, each additional segment adds 14 inches (356 mm).

a.Inside width: 53 inches (1346 mm)

b.Outside width: 62 inches (1575 mm)

c.Inside projection: 38 inches (65 mm)

d.Overall: 62 inches by 38 inches by 21 inches high (1575 mm by 965 mm by 533 mm).

One-piece modular egress window well (Item no. WW-44905-SINGLE).

Color: Speckled earth-tone.

Accessories:: Provide Window Well Cover (Item no. WW-44925).

** NOTE TO SPECIFIER ** Mar-flex Rhino Egress Wells is rotational molded for maximum durability. Provides escape with built-in steps. Meets all building codes for below-grade second egress. Won't rust or dent. Features built in floor for maintenance free construction. Installation hardware kit sold separately. Limited Lifetime Warranty. Delete if not required.

Product: RhinoWells Egress Window Wells as manufactured by Mar-flex Waterproofing & Building Products.

** NOTE TO SPECIFIER ** Delete size not required.

Size: Short - 76 inches width by 44 inches projection by 63 inches height (1930 mm by mm by 1118 mm).

Inside width at top: 69-1/2 inches (1765 mm).

Inside width at bottom: 56-1/2 inches (1435 mm).

** NOTE TO SPECIFIER ** Delete color not required.

a.Color: Sandstone (Item no. WW-44110).

b.Color: Granite (Item no. WW-44115).

Size: Tall - 76 inches width by 44 inches projection by 83 inches height (1118 mm by 1930 mm by 2108 mm).

Inside width at top : 69-1/2 inches (1765 mm).

Inside width at bottom: 56-1/2 inches (1435 mm).

** NOTE TO SPECIFIER ** Delete color not required.

Color: Sandstone (Items no. WW-44118).

Color: Granite (Item no. WW-44119).

Size: Tall - 76 inches width by 44 inches projection by 83 inches height (1118 mm by 1930 mm by 2108 mm).

Inside width at top : 69-1/2 inches (1765 mm).

** NOTE TO SPECIFIER ** Delete optional covers if not required.

Accessories:

Provide hinged window well cover (Item no. WW-44170).

Provide steel egress window well grate cover (Item no. WW-44176).

** NOTE TO SPECIFIER ** Mar-flex Stonewells Egress Wells provide escape with built-in step. Meets all building codes for below-grade second egress. Won't rust or dent. Has fine stone texture. Dual wall design offers higher backfill rating. Installation hardware kit sold separately. (Item no. WW-44180) Limited Lifetime Warranty. Delete if not required.

Product: Stonewells Egress Window Wells as manufactured by Mar-flex Waterproofing & Building Products.

** NOTE TO SPECIFIER ** Delete size not required.

Size: 75 inches width by 54 inches projection by 64-1/2 inches height (1905 mm by 1372 mm by 1600 mm).

Inside Width: 66 inches (1676 mm).

Provide window well cover - Large (Item no. WW-42145).

Inside projection at bottom: 37 inches (940 mm).

** NOTE TO SPECIFIER ** Delete color not required.

Color:

Speckled Sandstone (Item no. WW-44440).

Speckled Granite (Item no. WW-44430).

** NOTE TO SPECIFIER ** Delete optional cover if not required.

Accessories: Provide clear hinged window well cover (Item no. WW-44450).

** NOTE TO SPECIFIER ** Egress Style Casement Area Wells. Painted white. Delete if not required.

Product: Egress Style Casement Area Wells as manufactured by Mar-flex Waterproofing & Building Products.

Sizes:

** NOTE TO SPECIFIER ** Delete size not required.

42 inches width by 36 inches projection by 48 inches height (1067 mm by 914 mm by 1219 mm).(Item no. WWGW-423648)

42 inches width by 36 inches projection by 60 inches height (1067 mm by 914 mm by 1524 mm). (Item no. WWGW-423660)

42 inches width by 36 inches projection by 72 inches height (1067 mm by 914 mm by 1829 mm).(Item no. WWGW-423672)

60 inches width by 36 inches projection by 48 inches height (1524 mm by 914 mm by 1219 mm).(Item no. WWGW-603648)

60 inches width by 36 inches projection by 60 inches height (1524 mm by 914 mm by 1524 mm). (item no. WWGW-603660)

60 inches width by 36 inches projection by 72 inches height (1524 mm by 914 mm by 1829 mm).(Item no. WWGW-603672)

NOTE TO SPECIFIER ** Delete accessories if not required.

Accessories:

3 Rung Ladder 48-60 inches (1219 - 1524 mm), White - Inside width 12 inches (Item no. WWAL-00003)

4 Rung Ladder 72-84 inches (1829 - 2137 mm, White - Inside width 12 inches (Item no. WWAL-00004).

Egress Metal Grate, White - Inside width 42 inches (1067 mm) (Item no. WWGRW-04236).

Egress Metal Grate, White - Inside width 60 inches (1524 mm) (Item no. WWGRW-06036).

Egress Metal Grate, Bronze - Inside width 42 inches (1067 mm) (Item no. WWGRB-04236).

Egress Metal Grate, Bronze - Inside width 60 inches (1524 mm) (Item no. WWGRB-06036).

EXECUTION

EXAMINATION

Do not begin installation until substrates have been properly prepared.

If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

PREPARATION

Clean surfaces thoroughly prior to installation.

Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

Dig out and remove existing window well if present.

INSTALLATION - GENERAL

Install in accordance with manufacturer's instructions.

Window Wells should be mounted flush against the foundation wall. Apply a thick bead of quality polyurethane silicone around the face flange of the well and set against the wall.

Window well should be installed 1 inch - 4 inches (25 mm -76 mm) above final grade.

WINDOW WELL INSTALLATION

NOTE TO SPECIFIER ** Delete if not required.

Mar-flex Landscapes No Maintenance Window Wells and Standard Round Metal Area Wells as manufactured by Mar-flex Waterproofing & Building Products.

For the Landscapes, connect perimeter drain system to window well. If no perimeter drain is present, fill in base of hole under and around window well with a minimum of 6 to 8 inches (152 mm to 203 mm) of pea gravel.

Center the window well and level to desired depth.

Use a hand-held drill and 8 mechanical fasteners or Powder Actuated Fastening System with pins and metal washers to secure window well to foundation wall.

Grade or backfill to desired height around window well.

** NOTE TO SPECIFIER ** Delete accessories if not required.

Grade or backfill to desired height around window well.

Install Landscapes window well cover by sliding over the top until it snaps over the front and into the (3) slots.

Install Standard Galvanized window well's 37 inch (940 mm) grate.

** NOTE TO SPECIFIER ** Delete if not required.

EMERGENCY EGRESS WINDOW WELL INSTALLATION

** NOTE TO SPECIFIER ** Delete option not required.

Mar-flex Modular Egress Window Wells as manufactured by Mar-flex Waterproofing & Building Products

Determine height needed. Note: Each unit measures 21 inches (533 mm) high, but when overlapped the added height is only 14 inches (356 mm).

Set first unit on the ground with rounded end up and feet on the ground. This positions the handle to the top of the well. Place next unit to the outside and over top the first unit.

Align predrilled holes and place wire ties through to hold units in places for easy installation.

Add additional units as needed to reach preferred height. Note: Maximum number of units is 5.

Using the 3/8 inch x 2-1/2 inch (9.5 mm x 63.5 mm) Concrete Anchor bolts and washers, mount the well to the wall.

Mar-flex RhinoWell Egress Window Wells as manufactured by Mar-flex Waterproofing & Building Products.

Determine height needed. And snap horizontal line.

Measure down from chalk line either 63 inches (1600 mm) or 83 inches (2108 mm) depending on height of your well. Snap another horizontal level chalk line.

From this line, measure from the center of the window over 18 inches (457 mm) each side and attach mounting bracket with a nail gun.

Set the window well centered into the brackets installed.

Nail one side of the window well and check top dimensions from top edge to edge making sure not to exceed 74-1/4 inches (1886 mm) overall, then nail the opposite side.

With hammer drill and wedge drill bit, drill all pinned impression holes 2-3/4 inches (70 mm) deep around entire window well; sides and bottom.

Using the nailed holes from step e, take the 3/8 inch x 2-1/2 inch (9.5 mm x 63.5 mm) concrete anchor mounting bolts and fender washers and tighten the window well to the concrete wall on the sides and bottom.

Place drain cap in bottom of well. Connect drain cap to planned drainage system.

Mar-flex Stonewell Egress Window Wells as manufactured by Mar-flex Waterproofing & Building Products.

Measure and mark the center of the window.

Measure and mark two lines on each side of the window; at 73 inches and at 75 inches. Position the edges of the egress well flanges along and within these vertical lines. Note: If proper dimensions are not followed, cover will not fit properly.

Install using 3/8 inch x 2-3/4 inch (9.5 mm x 70 mm) or larger wedge anchors or Tapcon screws into the pre-formed hole locations on each flange. Must use a fender washer on the egress flange with each wedge anchor or Tapcon screw.

Install by working from top of each flange to bottom of flange.

BACKFILLING

Follow manufacturer's specific requirements for each well.

Use pea gravel or 3/4 inch (19 mm) or smaller free-draining rock to create a backfill barrier around the outer perimeter of the window well and approximately 1 foot (305 mm) down from the top of the window well.

The top 6 inches (152 mm) of the window well perimeter can be backfilled with topsoil to final grade. Slope final grade away from well in all directions.

Drainage is required. Connect to existing drainage or if there is no existing drainage system exits make provisions to direct drainage away from the well to well drained soil.

Gutter downspouts should be a minimum of 8 to 10 feet (2.4 m to 3 m) from the window well or at least 10 feet from the foundation wall and should be directed away from the window well with rigid or flexible pipe.

PROTECTION

Prevent damage to well by keeping heavy excavation equipment.

Protect installed products until completion of project.

Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download