Ref - Indian Railway



|Page No. 1 of 14 |Effective from 15.10.2008 |DOC No. WDO No. 0002 |

1. Title : Quarterly Notification No. 292 Period: July. 2008 to Sept. 2008

(CONSTRUCTION DRGS.,PART DRGS.AND SPECIFICATION)

|S. No. |Date of Amendment |Page No. |Version |Reason for Amendment |

|1 |Nil |NA |0 |First issue |

|Approved by |Dir. / Wagon |

|Signature | |

|Page No.2 of 14 |Effective from15-10-2008 |DOC No. WDO No. 0002 |

1.0 Title: Quarterly Notification No.292 Period: July. 2008 to Sept. 2008

1. ALTERATION IN CONSTRUCTION DRAWINGS:

|S.NO. |DRAWING NO. |WAGON |DESCRIPTION |ALT. |PREVI-OUS ALT. |Issue ing |

| | | | |NO. |NO. |letter No. & |

| | | | | | |dt. |

|1. |WD-91071-S-81 |BOBRN |*. Note No. 5,6,14,16a,17a & 22 revised. |11 07/08 |10 |MW/MK- |

| | | |*. Note No. 16b,17b, & Detail to legend -`FF` added. | | |Dt. 06/08 |

| | | |*. Drg. Revised & replotted. | | | |

|2. |WD-07001-S-02 |BOXNR |Diagram- altered by adding footstep & ladder |2 07/08 |1 o1/08 |MW/ |

| | | | | | |BOXNR |

| | | |General Arrgt. – Altered by adding footstep & ladder. | | |Dt.07/08 |

| |WD-07001-S-03 |“ | |2 07/08 |1 o1/08 | |

| | | |u/frame Arrangement – altered by cross tie length 551 | | | |

| | | |to 543 and 478 to 543 of item 26 & 23 respectively. | | | |

| |WD-07001-S-04 |“ |Note No.-3 added & Material changed in item.-22. |2 07/08 |1 01/08 | |

| | | | | | | |

| | | |Body Side Arrangement.- Altered by modifying Note and | | | |

| | | |detail at `K` corrected and shown. | | | |

| | | | | | | |

| | | |Body side stanchion- Altered by removing, rivets. | | | |

| |WD-07001-S-08 |“ | |2 07/08 |1 01/08 | |

| | | |Body End Arrangement- Altered by adding footstep, | | | |

| | | |ladder, rivet removed & packing cover plate added. | | | |

| | | | | | | |

| |WD-07001-S-09 | |Attachment of end to Hd/ stock altered by removing |2 07/08 |2 01/08 | |

| | |“ |rivets and size of bolt corrected. | | | |

| | | |CRF Section Altered by changing length of item -9 & 10| | | |

| |WD-07001-S-10 |“ |( Interchange) and item-13 & 14 radius modified. |2 07/08 |2 01/08 | |

| | | | | | | |

| | | | | | | |

| | | | | | | |

| |WD-07001-S-11 | | | | | |

| | |“ | |2 07/08 |1 01/08 | |

| | | | | | | |

| |WD-07064-S-01 | | | | | |

| | | | | | | |

| | |“ | |1 07/08 |Nil. | |

|Page No.3 of 14 |Effective from15-10-2008 |DOC No. WDO No. 0002 |

|S.NO. |DRAWING NO. |WAGON |DESCRIPTION |ALT. |PREVI-OUS ALT. |Issue ing |

| | | | |NO. |NO. |letter No. & |

| | | | | | |dt. |

|3. (A) |WD-89070-S-3 |Casnub 22NLM |( I ). Material of side frame under note no. – 7 is |5 07/08 |4 | |

| | |Bogie |replaced by material as per clause 2.1 and 2.2 of RDSO| | | |

| | | |Specification No. WD-55-Misc.-08 | | | |

| | | |(ii). Following dimensions have been added. Jaw | | | |

| | | |location 50,50 and punch marks. Pop mark location 25,5| | | |

| | | |central opening locations Dim. 5,25,307, 2-1.5 deep | | | |

| | | |punch mark. | | | |

| | | |876.5mm. height of side frame from R.L. | | | |

| | | |(iii). 14± .5 changed to 13.5± .5 at Sec. `AA` and | | | |

| | | |`BB` DIM. 6R changed to 10R. | | | |

| | | |(iv). Following reference sufacees have been added. | | | |

| | | |[A],[B],[C],[D],[E] | | | |

| | | |[F],[G],[G1],[H],[H1],[I],[I1],[J],[J1], | | | |

| | | |[K],[K1] ,[N],[O],[U],[V]. | | | |

| | | |(v). Note No. 9,10,11,12 and 13 have been added. | | | |

| | | | | | | |

| | | |( I ). Material of bolster is replaced by material as | | | |

| | | |per cluse. 2.1 & 2.2 of RDSO. Spec. No. | | | |

| | | |WD-55-Misc.-08. | | | |

| | | |(ii). Following dimensions have been added.100 mm. | | | |

| | |Casnub 22NLM |centre distance of punch marks at C.P. location and | | | |

|(B) |WD-89070-S-4 |Bogie |wedge pocket |4 07/08 |3 | |

| | | |+ 1 | | | |

| | | |location, Dim. [90],[292],361.5 - 0 at Sec. `C-C` . | | | |

| | | |(iii). Tolerance on the following dimensions have been| | | |

| | | |added, | | | |

| | | |+ 1 + 1 | | | |

| | | |80 - 0 , 10 - 0 ,153± 1.5,120 ± 1.5 | | | |

| | | |105 ± 1.5., 24 ± 1.5. | | | |

| | | |(iv). Following reference surfaces have been added. | | | |

| | | |[A], [B], [C], [D], [E], | | | |

| | | |(v). Welding procedure for item No. 2 & 3 has been | | | |

| | | |added. | | | |

| | | | | | | |

|Page No.4 of 14 |Effective from15-10-2008 |DOC No. WDO No. 0002 |

|S.NO. |DRAWING NO. |WAGON |DESCRIPTION |ALT. |PREVI-OUS ALT. |Issue ing |

| | | | |NO. |NO. |letter No. & |

| | | | | | |dt. |

| (B) |WD-89070-S-4 |Casnub 22NLM | (vi). Precaution in the welding processes added. |4 07/08 |3 | |

| | |Bogie |(vii). Welding procedure for welding of bottom centre | | | |

| | | |pivot ( Item -1 of Drg No. WD-85079-S-2) with bolster | | | |

| | | |added. | | | |

| | | |(viii). Note No. 7,8, 9,10,11,12, 13 & 14 have been | | | |

| | | |added. | | | |

|4. |WD-05086-S-04 |BOXNHL |( I ). Dimensions in Item No. -15 changed from 590 and|3 07/08 |2 |MW/ |

| | | |284 to 437,437 respectively. | | |BOXNHl |

| | | |(ii). Dimensions 743.5 and 360 correct. to 809.5 and | | |Dt.07/08 |

| |WD-05086-S-10 |“ |294 respectively . |2 07/08 |1 | |

| | | |(iii). Item No. 2 dim. Changed from 600 to 594mm. | | | |

| | | |(iv). In. Item. 8 dim. 300 changed to 294mm. |3 07/08 |2 | |

| |WD-05086-S-14 |“ |(v). In item. 2 M24 Bolts corrected to M16 Bolts. | | | |

| | | |(vi). Dims. 373,403 and 30 corrected to 439,469 and 15|3 07/08 |2 | |

| |WD-05086-S-15 |“ |respectively in item.18 | | | |

| | | | |3 07/08 |2 | |

| |WD-05086-S-16 |“ |(vii). Legends D and DD revised. | | | |

| | | |Dimension 36 changed to 35 mm. |4 07/08 |3 | |

| |WD-05086-S-19 |“ |(viii). Items- 1,4,5 revised. | | | |

| | | |(ix). Drawing revised. | | | |

| |WD-05086-S-21 | | |2 07/08 |1 | |

| |WD-05086-S-11 |“ | |2 07/08 |1 | |

| |WD-05086-S-12 | | |3 07/08 |2 | |

| | |“ | | | | |

| | |“ | | | | |

|5. |WD-02021-S-02 |BOXNAL- |( I ). Nomenclature and weight table revised. |1 07/08 |Nil. | |

| | |HSM1 |(ii). Pivot filler support shown in plan view and | | | |

| |WD-02021-S-04 | |`BOXNAL` changed to `BOXNALHSM1`. |2 07/08 |1 | |

| | | |(iii). 36 mm pitch revised to 35mm for Uncoupling Gear| | | |

| | | |bracket and `BOXNAL `changed to `BOXNALHSM1`. | | | |

| |WD-02021-S-05 | | |3 07/08 |2 | |

|Page No. 5 of 14 |Effective from 15.10.2008 |DOC No. WDO No. 0002 |

|S.NO. |DRAWING NO. |WAGON |DESCRIPTION |ALT. |PREVI-OUS ALT. |Issue ing |

| | | | |NO. |NO. |letter No. & |

| | | | | | |dt. |

|5. |WD-02021-S-06 |BOXNAL- | (iv). In item.- 8 , 5mm thick packing added and |3 07/08 |2 | |

| | |HSM1 |nomenclature revised . | | | |

| |WD-02021-S-12 | |(v). Revised and redrawn. |2 07/08 |1 | |

| | |“ | | | | |

| |WD-02021-S-13 | |(vi). Reference drg. Nos. corrected in items-8,9 and |1 07/08 |Nil. | |

| | | |nomenclature changed to `BOXNALHSM1`. | | | |

| | |“ |(vii). Drawing revised with additional legends and | | | |

| |WD-02021-S-14 | |marking drg name `BOXNAL` changed `BOXNALHSM1`. |1 07/08 |Nil. | |

| | | | | | | |

| | | | | | | |

|6. |WD-05084-S-01(T ) | |Note No. 1.4 revised and written as `SUSPENSION AS |1 07/08 |Nil. | |

| | | |PER DRAWING No. WD-08053-S-1`. | | | |

| | | | | | | |

|7. |WD-08022-S-01 |BOBRNEL |( I )*. Drg. No. WD-08022-S-56, WD-07039-S-65 & S-66 |1 07/08 |Nil. | |

| | | |and WD-91101-S-05 added. | | | |

| | | |*. Drg. No. WD-08022-S-04 & S-08 replaced by | | | |

| | | |WD-96038-S-04 & WD-92081-S-56 respectively. | | | |

| | | |Door hold stiffener & door leap ground shown. | | | |

| | | |Changed ref. drg. no. of item.-5,18 & 25. | | | |

| |WD-08022-S-02 |“ |Changed material & specification of item.-7,9 &10, |1 07/08 |Nil. | |

| | | |IRSM-44 in place of | | | |

| |WD-08022-S-03 |“ |IS: 2062 Fe 410 Cu. WA. |1 07/08 |Nil. | |

| | | |Hardened & tempered added with IS:1875 Cl. IV in | | | |

| |WD-08022-S-05 | |item.-2 & 7. |1 07/08 |Nil. | |

| | | |Replaced by WD-96038-S-04 (Alt.-5). | | | |

| | | |Replaced by WD-92081-S-56 (Alt.-5) | | | |

| |WD-08022-S-09 | |.Replaced by WD-07039-S-65 (Alt.-2). |1 07/08 |Nil. | |

| | | | | | | |

| |WD-08022-S-04 | | |1 07/08 |Nil. | |

| |WD-08022-S-00 | | |1 07/08 |Nil. | |

| |WD-08022-S-65 | | |1 07/08 |Nil. | |

|Page No. 6 of 14 |Effective from 15.10.2008 |DOC No. WDO No. 0002 |

|S.NO. |DRAWING NO. | WAGON |DESCRIPTION |ALT. |PREVI-OUS ALT. |Issue ing |

| | | | |NO. |NO. |letter No. & |

| | | | | | |dt. |

|8. |WD-08009-S-07 |BOBRN25 |*. Dims. of item.- 1,2 & 3 revised. |1 07/08 |Nil. | |

| | | |*. Chart of surface roughness added & shown symbol at | | | |

| | | |roughness. | | | |

| | | |*. Drg. Revised and redrawn. | | | |

| |WD-07039-S-62 |“ “ |*. Location of item- 9 changed. |1 07/08 |Nil. | |

| | | |*. Section- J J added. | | | |

| |WD-07039-S-65 | |*. Item. No. 17 added & shown in drg. |1 07/08 |Nil. | |

| | | |*. Drg. revised & replotted. | | | |

| | | | | | | |

| |WD-07039-S-66 | |*. Shown modified door hinge in place of door hinge |1 07/08 |Nil. | |

| | | |(item.-2) also shown ref. drg. WD-91071-S-66. | | | |

| | | |*. Item.-5 deleted. | | | |

| | | |*. Cutting for door hinge ( 210x33) show in item-2 at a | | | |

| | | |distance of 285 & 569 and middle of 569. | | | |

| | | |*. Drg. revised & replotted. | | | |

| | | |*. Item.- 41 & 42 added. | | | |

| | | |*. Note No. 2,3 & 4 added. | | | |

| |WD-07039-S-70 | |*. No. off item. 30 & 10 increase 2 & 4 in place of 1 & 3 |1 07/08 |Nil. | |

| | | |respectively. | | | |

| | | |*. Drg. revised & replotted. | | | |

| | | |*. Item No. 21 added. | | | |

| | | |*. Shown item- 8,11& 21. | | | |

| |WD-07039-S-71 | |*. Item- 15,16 &17 modified. | | | |

| | | |*. Drg. revised & replotted. |1 07/08 |Nil. | |

| | | |Corrected C.G. ( Empty/ loaded) 1.068 M & 2.496 M shown | | | |

| | | |in place of 1.002 M & 2.245M respectively. | | | |

| |WD-07039-S-51 | | |3 07/08 |2 02/08 | |

|9. |WD-91071-S-50 |BOBRN |Reference drg. No. WD-07039-S-65 in place of |8 07/08 |7 03/08 | |

| | | |WD-08022-S-65 | | | |

|10. |WD-91071-S-01 |BOBRN |*. Data of `BOBRNALHSM1` in wagon data. |9 07/08 |8 03/08 | |

| | | |*. In note no. 4 included `BOBRNALHSM1` | | | |

| | | |(CC+ 6t) for showing spring group. | | | |

| | | |*. Added `BOBRNALHSM1` in type of wagon. | | | |

| | | |*. Drg. replotted. | | | |

| | | |*. Drg. No. WD-91071-S-01 (alt.-9) | | | |

| | | |Supersedes drg. No. WD-02066-S-00(alt.-nil.). | | | |

|Page No. 7 of 14 |Effective from 15.10.08 |DOC No. WDO No. 0002 |

|S.NO. |DRAWING NO. | WAGON |DESCRIPTION | ALT. |PREVI-OUS ALT. |Issue ing |

| | | | |NO. |NO. |letter No. & |

| | | | | | |dt. |

|11. |WD-06008-S-3 |25t. BOGIE |Drg. of “ CAST STEEL SIDE FRAME” to drg. No. WD-06008-S-3 |1 07/08 |Nil. | |

| | | |alt Nil. Has been altered for following changes under alt.| | | |

| | | |(1). | | | |

| | | |( i ). Section-`B-B`& `C-C` revised. | | | |

| | | |(ii). Section-`T-T` added. | | | |

| | | |(iii). Dims 143 & 86 added at elevation and dims. 19,17& | | | |

| | | |R300 added Sec.-`D-D` +1 | | | |

| | | |(iv). Tolerance -0 added on dim. 100 | | | |

| | | |+3 | | | |

| | | |and tolerance -0 added o dim. 70. | | | |

| | | | | | | |

| | | |Drg. of `Bogie Details` to drg. no.WD-06008-S-5 alt. Nil.| | | |

| | |“ “ |Has been altered under alteration no. 1 for following | | | |

| |WD-06008-S-5 | |changes. |1 07/08 |Nil. | |

| | | |( i ). Notes revised and re-numbered as below:- | | | |

| | | |(ii). Note. No. 2 to 3.2.3 separated under heading | | | |

| | | |“WELDING PROCEDURE” and Sl. nos. re-numbered. | | | |

| | | |(iii). Other notes 1 & from Sl. No. 4 to 9 re-numbered | | | |

| | | |from Sl. No. 3 to 9 respectively. | | | |

| | | |(iv). Following notes added. | | | |

| | | |(v). Note No. 10 “UNSPECIFIED TOLERANCES AS PER IS:2102 | | | |

| | | |MEDIUM CLASS”. | | | |

| | | |(vi). Note No. 11 “ SURFACES [C] & [D] MUST CO- PLANER”. | | | |

| | | |(vii). Note No. 12 “ TOLERANCE ON C.D. OF HUCK BOLT HOLES | | | |

| | | |& TOLERANCE ON HOLE SIZE AS PER IS:7215.” | | | |

| | | |(viii). Note No. 13 “ flatness of surface [A] & [B] MUST | | | |

| | | |BE WITHIN 0.3 MAX. IN ITEM NO.4”. | | | |

| | | |(ix). Note o. 14 “ THIS DRAWING IS TO BE READ ALONWITH | | | |

| | | |DRAWING TO DRG. No. WD-06008-S-21”. | | | |

|Page No. 8 of 14 |Effective from 15.10.2008 |DOC No. WDO No. 0002 |

|S.NO. |DRAWING NO. | WAGON | DESCRIPTION |ALT. |PREVI-OUS ALT. |Issue ing |

| | | | |NO. |NO. |letter No. & |

| | | | | | |dt. |

|11. |WD-06008-S-5 |25t. BOGIE |(x). Reference surface [A], [B], [C]& [D] added in |1 07/08 |Nil. | |

| | | |item. No. 4 & 1 respectively . | | | |

| | | |(xi). Angle 90˚ , Dim 800 (for surface [C] & [D], R 5 &| | | |

| | | |R50 added. | | | |

| | | |(xii)View “ ENLAGED DETAILS AT`X`” added. | | | |

| | | |(xiii) Tolerance ±0.25 on thickness 10 at item 4 added.| | | |

| | | |(xiv) Dim. R36,2880,30, C.D. 70&472 deleted, 6holes for | | | |

| | | |Ø12 rivets deleted. | | | |

| | | |(xv). Dim. 270,481 & 310 changed to 285,330 & 325 | | | |

| | | |respectively. | | | |

| | | |(xvi). Drg. revised and redrawn. | | | |

|12. |WD-88088-S-04 |BOXNLW |No. off revised from 4to2 in item. No. 4 item No. 23 |9 07/08 |8 09/06 | |

| | | |(Cross bar bottom gusset added and plan view revised. | | | |

| | | |No. off changed from 2 to 2 items-34&36 respectively . | | | |

| |WD-88088-S-10 |“ |Centre sill bottom stiffening plates introduced. |7 07/08 |6 11/06 | |

| | | |Item13(cross bar bottom gusset) introduce and No. off | | | |

| |WD-88088-S-14 |“ |changed from 4 to 2 in item-2 . |10 07/08 |9 09/06 | |

| | | |Dim. 225 change to219 in item-15 and view corrected. | | | |

| |WD-88088-S-15 |“ | |9 07/08 |8 09/06 | |

| | | | | | | |

| | | | | | | |

| |WD-88088-S-19 |“ | |6 07/08 |5 11/06 | |

|13. |W-88088-S-14 |BOXNLW |Centre sill bottom stiffening plate thickness revised. |11 07/08 |10 10/07 | |

|14. |WD-07005-S-09 |BOXN25t. |Dims. 734.5 and 360 corrected to 809.5 and 294 |1 07/08 |Nil. | |

| | | |resp./controlling dimensions for brake Gear shaft long. | | | |

| | | |In item 2 dim. 590 change to 566. | | | |

| |WD-07005-S-10 |“ “ |In item 3 dims. 1335 and 1595 correct o 1192 and 1452 |1 07/08 |Nil. | |

| | | |respectively. | | | |

| | | |In item 17 dims 373,403 and 30 correct to 439,469 and | | | |

| | | |15 respectively. | | | |

|15. |WD-07001-S-02 |BOXNR |C.G. for coal loading show n “22 HS’ deleted from |3 07/08 | | |

| | | |CASNUB-22HS-BOGIE, Show in diagram. | | | |

| | | |‘22HS ‘ deleted from CASNUB-22HS-BOGIE which is shown in| | | |

| |WD-07001-S-02 |“ |elevation of diagram. |3 07/08 | | |

|Page No. 9 of 14 |Effective from 15.10.2008 |DOC No. WDO No. 0002 |

|S.NO. |DRAWING NO. | WAGON | DESCRIPTION |ALT. |PREVI-OUS ALT. |Issue ing |

| | | | |NO. |NO. |letter No. & |

| | | | | | |dt. |

|16. |WD-05086-S-05 |BOXNHL |Location of item 9 corrected. |3 08/08 | | |

| | | | | | | |

| |WD-05086-S-05 |“ |Marking of item 12 corrected. |12 08/08 | | |

| | | | | | | |

| |WD-05086-S-10 |“ |Position of item 32 corrected in sectional view AA and|3 08/08 | | |

| | | |75x8 flat changed to 60x8. | | | |

| | | |Dim. 854 changed to 1000 in item 2 and Dim. 24 | | | |

| |WD-05086-S-17 |“ |mentioned in Section-AA. |3 08/08 | | |

|17. |WD-08008-S-07 |BOXNHL |Marking of item 12 corrected. |1 08/08 |Nil | |

| | |(WCCCS | | | | |

| |WD-08008-S-04 |“ “ |Dims. 590 and 284 corrected to 437 each respectively. |1 08/08 |Nil | |

| | | |Section –AA view corrected. | | | |

| |WD-08008-S-05 |“ “ | |1 08/08 |Nil. | |

| | | |Dims. 743.5 and 360 corrected to 809.5 and 294 | | | |

| |WD-08008-S-10 |“ “ |respectively locating dims. 95 added for item 19 item| | | |

| | | |32 revised. | | | |

| | | |In Section BB and section- EE & item 1 dims 5 and 18 | | | |

| | | |added . In item 2 dims. 153 and 265 corrected to 195| | | |

| |WD-08008-S-14 | |and 223 respectively. |1 08/08 |Nil. | |

| | | |3 mm. packing plate added. | | | |

| | | | | | | |

| | | |Bolt size corrected to M16 CRF length decreased . | | | |

| |WD-08008-S-15 | |Dimension 24 added In Section-AA Dimension 854 |1 08/08 |Nil. | |

| | | |corrected to 1000 weld shown. | | | |

| |WD-08008-S-16 | |View corrected in Section-AA and Section-BB. |1 08/08 |Nil. | |

| | | |Drawing revised. | | | |

| |WD-08008-S-17 | | |1 08/08 |Nil. | |

| | | | |1 08/08 |Nil. | |

| | | | | | | |

| |WD-08008-S-18 | | |1 08/08 |Nil. | |

| | | | | | | |

| |WD-08008-S-19 | | |1 08/08 |Nil. | |

|18. |WD-08004-S-2 |Casnub 22UG BOGIE |( I ). Drawing No. WD-92058-S-2 (Spring Details) |1 08/08 |Nil. | |

| | | |replaced by Drg. No. WD-08053-S-1 (Spring Details). | | | |

| | | |(ii). 20mm. thick happy pad to drg. no. HP001 | | | |

| | | |deleted. | | | |

| | | |(iii). Friction wedge of 27 angle with Non.- Metallic| | | |

| | | |liner to Drg. No. WD-08004-S-2, Item -1 replaced by | | | |

| | | |friction wedge to Drg. No. SK-77579. | | | |

|Page No.10 of 14 |Effective from 15.10.2008 |DOC No. WDO No. 0002 |

|S.NO. |DRAWING NO. | WAGON | DESCRIPTION |ALT. |PREVI-OUS ALT. |Issue ing |

| | | | |NO. |NO. |letter No. & |

| | | | | | |dt. |

|18. |WD-08004-S-2 |Casnub 22UG BOGIE |(iv). Non. Metallic liner of centre pivot to Drg. No. |1 08/08 |Nil. | |

| | | |EMS 4162/ASS/Prop replaced by Drg. No. WD-97049-S-3 | | | |

| | | |Item-3 & 4. | | | |

| | | |(v). Bolster liner to Drg. No. WD-08004-S-2, Item-2 | | | |

| | | |deleted. | | | |

| | | |(vi). Note 1 & 2 revised & Note 3 & 5 added. | | | |

| | | |(vii). Dimension. 932,921 &796 corrected as 935,924 & | | | |

| | | |799 respectively. | | | |

| | | |(viii). Material Specification No. of spring washer | | | |

| | | |under Item-18 corrected as IS:3063 instead of IS:3016.| | | |

|19 |WD-08054-S-01 |BOXLWHSM1 | Name of wagon has been changed to “BOXNLWM1” in |1 08/08 |Nil. | |

| | | |Diagram . | | | |

| |WD-08054-S-02 |“ “ |Name of wagon has been changed to “BOXNLWM1” in |1 08/08 |Nil. | |

| | | |Marking Diagram , Appropriate changes have also been | | | |

| | | |made as required in drawing. | | | |

|20. |WD-08066-S-01 |BCNHL |Dimensional Tolerance added & radius modified. |1 08/08 |Nil. | |

|21. |WD-07064-S-01 |BOXNR |Length of Item. 11 & 12 change, Note revised , table |2 08/08 |1 04/08 | |

| | | |of tolerances added, length of tolerances added and | | | |

| | | |radius changed and modified. | | | |

|22. |WD-08066-S-01 |BCNHL |Table of dimensional tolerances revised and changed, |2 08/08 |1 08/08 | |

| | | |Item-22 & 23 deleted in CRF Section , and radius | | | |

| | | |modified. | | | |

|23. |WD-89007-S-83 | BCNHL |Note No. 7,8 & 9 added are as follows. |4 08/08 |3 | |

| | | |Note No. 7 thickness of item no. 2 & 6 should be used| | | |

| | | |12mm. in place of 14mm. for BCNHL Wagon. | | | |

| | | |Note No. 8 Material of complete assembly should be as | | | |

| | | |IRS:M44 in place of IS:2062 Fe410 Cu WA. For BCNHL | | | |

| | | |Wagon. | | | |

| | | |Note No. 9 205x120 cut out at bottom of the plate | | | |

| | | |(Item-2) is not applicable for BCNHL Wagon. | | | |

|Page No.11 of 14 |Effective from 15.10.2008 |DOC No. WDO No. 0002 |

|S.NO. |DRAWING NO. | WAGON | DESCRIPTION |ALT. |PREVI-OUS ALT. |Issue ing |

| | | | |NO. |NO. |letter No. & |

| | | | | | |dt. |

|24 |WD-08064-S-01 |BOXNHL |(a)Dim. of all strain gauges & Dia. gauges are |1 09/08 |Nil. | |

| | | |mentioned for every Items. | | | |

| | | |(b). corrections in numbers of deal gauges. | | | |

| | | |( c ). Alteration of stain gauges on sole bar & side | | | |

| | | |strain & End stanchion are changed. | | | |

|25. |WD-89073-S-2 |BOGIE |( i ).In item no. 19 designation replace by “Sprig |10 09/08 |9 06/97 |Not Required |

| | | |Washer” | | | |

| | | |( ii ). “IS:3016” Corrected as “IS:3063”. | | | |

|26. |WD-05086-S-05 |BOXNHL |Qty. at Item-1 reduced and Item-10,11 & 12 added. |4 09/08 |3 07/08 | |

| | | |Item-12 added, Dimension 25,2996,10008 revised to | | | |

| |WD-05086-S-06 |“ |50,2946 and 9958.Note No. 3 added. |2 09/08 |1 11/07 | |

| | | |Section MM added in Item No.1. | | | |

| | | | | | | |

| |WD-05086-S-14 |“ |Holes for 22.2Ø Huck Bolt revised from 8 to 4 in item |4 09/08 |3 06/08 | |

| | | |no.8. | | | |

| |WD-05086-S-15 |“ |Quantity of item-1 reduced to 5R and 5L, item-8 and |4 09/08 |3 06/08 | |

| | | |note added. | | | |

| |WD-05086-S-17 |“ |Table of tolerances revised and length tolerances |4 09/08 |3 07/08 | |

| | | |table added. | | | |

| |WD-08030-S-01 |“ |Dimensions revised. |1 09/08 |Nil. | |

| | | | | | | |

| |WD-08030-S-02 |“ |Dimensions revised. |1 09/08 |Nil. | |

| | | | | | | |

| |WD-08030-S-03 |“ | |1 09/08 |Nil. | |

|27. |WD-05046-S-01 |BOGIE |Note No. 8 revised. |2 09/08 |1 08/06 |Not Required |

| |WD-06008-S-16 |“ |Note No. 10 revised. |1 09/08 |Nil. | |

| |WD-05054-S-01 |“ |Note No. 10 revised. |1 09/08 |Nil. | |

|28. |WD-05086-S-09 |BOXNHL |Horizontal lever Dimension modified and brake |2 09/08 |1 11/07 | |

| | | |calculation revised. | | | |

| |WD-05086-S-10 |“ |Dimension 280,675,415, 540,20 and 260 changed to 310 ,|4 09/08 |3 07/08 | |

| | | |645,458,497,10 and 239 respectively . | | | |

| | | |Dimensions 280,135,683,1309,1569,719,939,40 and 1059 | | | |

| |WD-05086-S-19 |“ |corrected to 310,148,758,1276.1536,646,928,62 and 1048| | | |

| | | |respectively. |5 09/08 |4 06/08 | |

| | | |Location of legend B revised. | | | |

| | | |Location of Mech. Code corrected. | | | |

| | | | | | | |

| |WD-05086-S-21 |“ | |3 09/08 |2 06/08 | |

|Page No. 12 of 14 |Effective from 15.10.2008 |DOC No. WDO No. 0002 |

2. ALTERATION IN PARTS DRAWINGS:

|S.NO. |DRAWING NO. | WAGON | DESCRIPTION |ALT. |PREVI-OUS ALT. |Issue ing |

| | | | |NO. |NO. |letter No. & |

| | | | | | |dt. |

|1. |W/BD-699 |ALL B.G. |“BACK STOP (B.G.)” has been altered due to following:-|2 09/08 |1 12/05 |MW/CPL/BG/H.T. |

| | |Bogie |( i ) In this drg the material of “BACK STOP (B.G.)” | | |Dt. O9/08 |

| | |Wagons. |has been changed from IS:1030 Cast steel 23-45 to | | | |

| | | |IS:1030-1998 Gr. 230-450 N. | | | |

|Page No. 13 of 14 |Effective from 15.10.2008 |DOC No. WDO No. 0002 |

3. New/Revised Issue Specification.

Specification No DESCRIPTION

1. WD-WPS-BOXNALHSM1-08 Welding Procedure specification for

bogie open wagon

2. WD-QAPCS-BOXNALHSM1-08 Quality Assurance plan cheek sheets

for bogie open wagon.

3. WD-WPS-BCNHL-08 Welding Procedure specification for

bogie covered wagon (91.6t.)

4. WD-QAPCS-BCNHL-08 Quality Assurance plan cheek sheets

bogie covered wagon (91.6t.)

5. WD-01-CRF-08 Cold rolled formed section for fright sock.

4. Fresh issues New Amendments.

|S.NO. |DESCRIPTION |

|1 |Corrigendum No. 3 of Jue . 2008 for WD-01-BCNHL-06 |

|2 |Amendment No. 1 of July . 2008 for WD-14-BOXNR -08 |

|3. |Corrigendum No. 2 of July. 2008 for WD-03-BOBYN-08 |

|4. |Corrigendum No. 3 of July . 2008 for WD-01-BOBRN 25-07 |

|5. |Corrigendum No. 1 of Sept. . 2008 for WD-01-BTFLN-06 |

|Page No. 14 of 14 |Effective from 15.10.2008 |DOC No. WDO No. 0002 |

Quarterly Notification No. 292 of July 2008 to Sep 2008

DISTRIBUTION

Copy Holder Copy No.

EDSW 01

EDSW/QA-1 02

ED/Carr. 03

ED/ED 04

ED/Testing 05

ED/QA-II 06

ED/MP 07

D/QA(I&L) 08

DSW-I 09

DSW-II 10

DSW-III 11

DSW-IV 12

DW/WD 13

JDS/WD 14

D/QA(I&L)/Kolkata 15

D/VDG 16

D/QA(I&L),Mumbai 17

D/QA(I&L),New Delhi 18

D/I&L, Burnpur 19

CME/ Chittaranjan 20

SIO/ Bangalore 21

DD/WAGON 22

DD/DOC (with CD.) 23

SE/Record 24

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download