PERIODICAL INSPECTION OF PORTABLE ELEC EQPT



PERIODIC INSPECTION OF PORTABLE ELEC EQPT

INSPECTION DATE:

FORM NO.

|TYPE OF EQPT |Portable Drilling machine |

|TAG NO. | | | |

|MAKE | |SL.NO. | |

|Model No. | | | |

|LOCATION OF THE DRILLING M/C AT THE TIME OF INSPN | | |

|NAME OF THE CONTRACTOR | | |

|CONTRACT SUPERVISOR NAME | | |

|CONTACT NO. | | |

Please fill in the below check list and mention clearly the non-compliance if any in the remarks column.

|S.No. |Checking parameter |OK |NOT OK |Remarks |

|1 |Enclosure of the drilling m/c is fibre | | | |

|2 |The drilling machine chuck tightness with drill bit | | | |

|3 |The cable length is not more than 5 mts. | | | |

|4 |No joints in the cable. | | | |

|5 |The brush holder and carbon brush condition. | | | |

|6 |The power cable is of copper of three core of minimum 2.5 | | | |

| |sq.mm size with overall PVC outer sheath. | | | |

|7 |Suitable plug top in place. | | | |

|8 |Termination tightness at the machine and plug top end | | | |

|9 |Grounding of the machine | | | |

|10 |No excessive sparks from brushes while in operation. | | | |

|11 |No excessive vibration / bearing noise | | | |

|12 |Deadman switch | | | |

The above points shall be checked thoroughly and in case of any critical non – compliance the machine should not be allowed to operate until the points are complied with.

|Overall condition |OK |NOT OK |

|Give brief reasons for Not OK: |

| |

| |

| |

|In case of Not OK, ensure the drilling machine is moved away from the process area and the corrective action is being taken. |

|Inform the respective contractor and CEIL department superintendents |

Next Due date for inspection:

|Suggested corrective actions: |

| |

| |

| |

Inspected by

|Inspected by |Name |Signature |

|Elec Engineer | | |

|HSE Engineer | | |

|Contract representative | | |

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download