State of Washington



State of Washington

Current Contract Information

Change Notice No. 13

Effective: March 1, 2011

|Contract number: |07005 |Commodity code: |2420 |

|Contract title: |CATCH BASIN CLEANER |

|Purpose: |UPDATE CONTACT INFORMATION FOR ENVIRO-CLEAN |

|Contract Term: |January 10, 2010 |through: |January 9, 2012 |

|For use by: |Department of Transportation and General use: All State Agencies, Political Subdivisions of Washington and |

| |Oregon State, Qualified Non-profit Corporations, Materials Management Center, Participating Institutions of |

| |Higher Education (College and Universities, Community and Technical Colleges). |

|Contract type: |This contract is designated as convenience use. |

|Scope of contract |This contract is awarded to multiple contractors. |

|Contractor : |See Attachment A |Contact: |See Attachment A |

|Address: |See Attachment A |

|Phone: |See Attachment A |

|FAX: |See Attachment A |

|Fed. I.D. No.: |See Attachment A |

|Supplier No.: |See Attachment A |

|Products available: |Catch Basin Cleaners with options. |

|Ordering information: |See Page 2 |

|Ordering procedures: |See Attachment A |

This page contains key contract features. Find detailed information on succeeding pages. For more information on this contract, or if you have any questions, please contact your local agency Purchasing Office, or you may contact our office at the numbers listed below.

|Contact Administrator: |Corinna Cooper |Customer Service |

|Phone Number: |(360) 902-7440 |Phone Number: |(360) 902-7400 |

|Fax Number: |(360) 586-2426 |Fax Number: |(360) 586-4944 |

|Email: |clcoope@ga. |Email: |csmail@ga. |

Visit our Internet site:

|Payment address: |See Attachment A |

|Order placement address: |See Attachment A |

|Minimum orders: |See Attachment A |

|Delivery time: |See Attachment A |

|Payment terms: |See Attachment A |

|Contract pricing: |Attachment B This is the summary page for Item pricing. Detailed pricing listed under awarded contractor |

| |attachments. |

|Contract pricing by Contractor: |Attachment “B1” Owen Equipment |

| |Attachment “B1” Enviro-Clean |

|Specifications |Attachment “C” Owen Equipment |

| |Attachment “C” Enviro-Clean |

|Term worth: |$6,160,000.00/ 2 YEARS |

|Current participation: |$0.00 MBE |$0.00 WBE |$6,160,000.00 OTHER |$0.00 EXEMPT |

| |MBE 0% |WBE 0% |OTHER 100% |Exempt 0% |

Notes:

I. State Agencies: Submit Order directly to Contractor for processing. Political Subdivisions: Submit orders directly to Contractor referencing State of Washington contract number. If you are unsure of your status in the State Purchasing Cooperative call (360) 902-7415.

II. Only authorized purchasers included in the State of Washington Purchasing Cooperative (WSPC) and State of Oregon Cooperative Purchasing Program (DASCPP/ORCPP) listings published and updated periodically by OSP and DAS may purchase from this contract. It is the contractor’s responsibility to verify membership of these organizations prior to processing orders received under this contract. A list of Washington members is available on the Internet , and a list of the Oregon members is available at contractors shall not process state contract orders from unauthorized users.

III. Recognizing that a single brand or manufacture would not satisfy the needs of the state, this contract was competitively awarded for a variety of products in this category. Every brand or model appearing on this contract was only awarded by manufacture to a single vendor, following the competitive process.

Prior to using this contract for a purchase, the end user should evaluate the products, pricing, and services on the contract and make a decision on the ones (s) that best fits their requirements. In each case a note to theirs files should be included communicating how their final choice selection was determined.

SPECIAL CONDITIONS:

1. Current Contract Information (CCI)

This Current Contract Information (Change Notice No. 13) is being issued to contact information for Enviro-Clean. All other terms, conditions, and pricing remain unchanged.

The following attachments provide information for this contract:

▪ Attachment “A” lists contract suppliers and selected Information: See Attachment A

▪ Attachment “B” provides a summary of Catch Basin item pricing by manufactures: Attachment B

▪ Attachment”B1” provides detailed item pricing and options available:

Attachment “B1” Owen Equipment

Attachment “B1” Enviro-Clean

▪ Attachment “C” provides bid specification compliance.

Attachment “C” Owen Equipment

Attachment “C” Enviro-Clean

2. Contractor Additional Options

Each contractor has provided an additional list of options that may be purchased from when using this contract. These options are included in this contract. However options such as customer supplied chassis or additional chassis or any other option that are not applicable to the equipment in the bid specifications are not authorized for purchase under this contract. Questions for clarification concerning options available under this contract should be directed to the Contract Administrator.

3. Certificate of Insurance

Contractor to furnish to the State Procurement Officer, a copy of a valid Certificate of Insurance listing the State as beneficiary (See Original Bid Document, Section II, Paragraph 1) within Fifteen (15) days after Contractor receipt of award notice.

4. Warranty

Bidder will submit a copy of warranty with items delivered under this contract. Unless otherwise specified, full parts and labor warranty period shall be for a minimum period of one (1) year after receipt of materials or equipment by the Purchaser. All materials or equipment provided shall be new, unused, of the latest model or design and of recent manufacture

In the event of conflict between contract terms and conditions and warranty submitted, to afford the state maximum benefits, the contract terms and conditions shall prevail.

5. Sales and Subcontractor Report

A quarterly Sales and Subcontractor Report (attached) shall be submitted in the format provided by the Office of State Procurement. You can get the report electronically at: . Total purchases for each State Agency, University, Community and Technical Colleges must be shown separately. Total purchases for all political subdivisions and non-profit organizations may be summarized as one customer. Additionally, all purchases by the State of Oregon or other purchasers must be reported as an aggregate total.

The report shall include sales information (Section A) and amounts paid to each subcontractor during the reporting period (Section B)

Reports should be rounded to nearest dollar. Contractors will be provided with all necessary sample forms, instructions, and lists. Reports are due thirty (30) days after the end of the calendar quarter, i.e., April 30th, July 31st, October 31st and January 31st.

ATTACHMENT “A” CONTRACT SUPPLIERS

|SUPPLIER: | |OWEN EQUIPMENT | |ENVIRO-CLEAN |

| | | | | |

|ADDRESS: | |P.O. BOX 30959 | |P.O. BOX 160 |

| | | | | |

|CITY/STATE: | |Portland, OR | |Gresham, OR |

| | | | | |

|ZIP CODE: | |97294 | |97030 |

| | | | | |

|TELEPHONE: | |(800) 992-3656 | |(360) 931-6999 |

| | | | | |

|FAX #: | |(503) 255-9055 | |(503) 491-2283 |

| | | | | |

|CONTRACTOR | |Matthew Wlodarczyk | |Frank Clanton |

|CONTACT: | | | | |

| | |mattw@ | |gm@ |

| | | | | |

|PAYMENT | |Net 30 Days | |Net 30 Days |

|TERMS: | | | | |

| | | | | |

|LEAD TIME-ARO: | |See Attachment “B” | |See Attachment “B” |

| | | | | |

|F.O.B.: | |WSDOT Destinations | |WSDOT Destinations |

| | |All Others FOB Dealer | |All Others FOB Dealer |

| | | | | |

|FREIGHT: | |Prepaid and included | |Prepaid and included |

| | | | | |

|MINIMUM ORDER: | |None | |None |

| | | | | |

|FED. I.D. NO: | |93-0666853 | |93-1298960 |

| | | | | |

|ORDER | |P.O. BOX 30959 | |P.O. BOX 160 |

|ADDRESS: | |Portland, OR 97294 | |Gresham, OR 97030 |

| | | | | |

|PAYMENT/ | |P.O. BOX 30959 | |P.O. BOX 160 |

|ADDRESS: | |Portland, OR 97294 | |Gresham, OR 97030 |

| | | | | |

|OREGON DELIVERY | |No Additional Cost | |No Additional Cost |

| | | | | |

ATTACHMENT “B” SUMMARY PRICE SHEETS

|Company |

|Owen Equipment |International/Vactor |

|Enviro-Clean |International/ |

| |Vac-Con |

ATTACHMENT “B1” OWEN EQUIPMENT

|Req. |Comm. Code |Description |Unit |Unit Price |

|Item | | | | |

|1 |2420 |TRUCK, CATCH BASIN CLEANER, 66,000 lbs. GVWR. WSDOT SPECIFICATION |EACH |$290,635.00 |

| | |0816/0817. Refer to Section 3.3, Specifications. | | |

| | | | | |

| | |Product Bid | | |

| | |Mfg.: International & Vactor | | |

| | |Brand/Model: Model 7600-6X4 / Vactor 2110J6 | | |

| | | | | |

| | |Lead-time: Materials, equipment or services will be delivered within | | |

| | |calendar 180-240 days after receipt of order (ARO). | | |

| | | | | |

| | | | | |

| | | | | |

| | | | | |

Manufacturer’s Parts Discount: 0% Dated: _____N/A________ Copy attached with bid

Manufacturer’s Accessories Discount: 0% Dated: _____N/A_______ Copy attached with bid

|OPTIONS: | | | |PRICES |

|1. Pusher Axle with a 13,500# rating will be located in front of the | | | |$11,622.00 As specified |

|drive axles. Hendrickson Model Para lift Ultra Light. The tires shall be | | | |$9,730.00 Watson-Chalin |

|255/70R22.5 mounted on 8.25x22.5” aluminum hub piloted wheels. Fender to be | | | | |

|included. | | | | |

|2. Tag Axle with a 13,500# rating and will be located behind the drive | | | |$11,622.00 As specified |

|axles. Hendrickson Model Para lift Ultra Light. The tires shall be | | | |$9,730.00 Watson-Chalin |

|255/70R22.5 mounted on 8.25x22.5” aluminum hub piloted wheels. Fender to be | | | | |

|included. | | | | |

|3. All optional axles shall be cab controlled for deployment only. All | | | |As specified with options 1 & 2 |

|adjustment controls will be located outside, directly behind the cab on the | | | | |

|street side. | | | | |

|4. All optional axles shall raise when the transmission is in reverse | | | |As specified with options 1 & 2 |

|5. When WSDOT chooses the additional rear mounted tag axle a chute shall be| | | |$3,337.00 |

|provided to ensure debris does not fall onto the axle or the unit. | | | | |

BEN-KO-MATIC CONTINUED: CORRECTED PAGE 4/20/06

|6. Provide an option price for an appropriately sized air compressor to | | | | |

|operate the chassis braking system as well as the additional axles. | | | |$1,102.00 |

|7. Shall provide pricing for a “Suck on the go” feature. | | | |$2,630.00 |

|8. Power windows and door locks on the chassis. | | | |$293.00 |

|9. Integral front frame extension. | | | |$275.00 |

|10. Cab over Low cab entry chassis. | | | |Not Available |

|11. ISM 370 Cummins engine. | | | |Not Available |

|12. Fuller 18 Speed manual transmission, with an Easy Pedal Plus clutch and | | | |Delete $7,825.00 |

|a two-piece clutch brake. | | | | |

|13. Fuller Auto Shift Transmission 18 speed | | | |Not Available |

|14. Fuller Auto Shift Transmission 10 Speed | | | |Not Available |

|16. Wireless controls for Boom and Rodder systems (Radio Controlled) | | | |$4,208.00 |

|17. Add 500 gallons of water carrying capability. | | | |$3,690.00 |

|18. 300 Feet of 1-inch high-pressure hose in lieu of the 1 ¼ inch hose. | | | |$693.00 |

|19. CB radio package | | | |$193.00 |

|20. Shall provide a deduct amount for the entire high pressure Rodding/Water| | | |$16,476.00 |

|System. | | | | |

|21. An AM/FM Radio with Weather Band | | | |Included item # 10 |

|22. Shall have a hose reel shield to protect the operator in case of hose | | | |$1,015.00 |

|failure. | | | | |

|23. Over weight debris-warning system with a light and audible alarm. | | | |Wisker Switch $1,680.00 |

| | | | |Loadman Digital Scale $8,489.00 |

|24. The ability of the boom to reach 24 feet from the centerline of the | | | |5 X 5 Vactor Boom $9,353.00 |

|chassis. | | | | |

|25. Rear Mounted Hose reel, in lieu of a front mounted reel. | | | |N/A |

ADDITIONAL OWEN EQUIPMENT OPTIONS:

Additional Options for Vactor 2100 Series

The following items may be added to the base bid unit for additional cost:

| | |Price |

|Upgrade to 2100 Plus Vactor |Add |$4,488.00 |

|External Mount Trash Pump with Float Pick-Up Arm Rated @ 450GPM |Add |$10,623.00 |

|High Dump Option |Add |$14,402.00 |

|Debris Body Load Limit Audible Alarm |Add |$1,872.00 |

|12 Cu. Yd. Debris Body |Add |$4,942.00 |

|15 Cu. Yd. Debris Body |Add |$11,363.00 |

|Load Man Digital Scale System |Add |$8,490.00 |

|Debris Body Hinged Deflector Plate Assembly |Add |$291.00 |

|Cold Weather Air Purge System |Add |$1,962.00 |

|Fan Flush Out System (Centrifugal Compressor Units Only) |Add |$451.00 |

|Hydraulic Tool Package |Add |$1,329.00 |

|Extra Capacity Hose Reel 800’ |Add |$3,932.00 |

|Worklight at Auxiliary Engine (Centrifugal Compressor Units Only) |Add |$396.00 |

|Debris Body Inner Connect – Additional Water Capacity |Add |$2,181.00 |

|Rear Rodder Pump Drain Valves |Add |$439.00 |

|36x18x18 Toolbox |Add |$879.00 |

|45x16x12 Toolbox |Add |$955.00 |

|Full Width Behind the Cab Tool Box – Must Add 18” Additional Chassis – CA |Add |$2,252.00 |

|Whelen DOT – 6 Head Strobe Light System |Add |$5,152.00 |

|Cordless Remote Pendant Control for Boom Operations |Add |$4,208.00 |

|Chassis Side Skirts |Add |$560.00 |

|Automatic Hose Level Wind Guide System |Add |$4,894.00 |

|Lateral Line Cleaning Hose Assembly |Add |$2,822.00 |

|PD Vacuum Relief System |Add |$2,366.00 |

|Vactor Lube Manifolds |Add |$2,060.00 |

|1300 Gallons Fresh Water Supply |Add |$2,564.00 |

|3” Drain Valve Located @ Rodder Pump |Add |$385.00 |

|Air Shift Engagements for Positive Displacement Blower Units |Add |$1,680.00 |

|Hot Shift Engagement for Positive Displacement Blower Units |Add |$4,932.00 |

|Multi-Flow Rodder Pump System |Add |$5,098.00 |

|Hydro-Excavator System With High Pressure Relief Valve |Add |$5,233.00 |

|Accumulator System for Water System |Add |$2,510.00 |

ADDITIONAL OWEN EQUIPMENT OPTIONS:

The following items may be deleted from the unit as bid:

| | |New Price |

|Centrifugal Separator (Cyclone) |Deduct |$2,981.00 |

|Folding Pipe Rack/Curbside |Deduct |$730.00 |

|Folding Pipe Rack/Street Side |Deduct |$730.00 |

|Handgun Hose Reel - Spring Retractable Reel with 50' Hose Assembly |Deduct |$901.00 |

|Hand Light with Bumper Plug |Deduct |$269.00 |

|Joystick Control for Boom Function |Deduct |$577.00 |

|For 5 Yard Debris Body |Deduct |$2,081.00 |

|For 600’ x 1” Sewer Hose |Deduct |$791.00 |

|For 800’ x 1” Sewer Hose |Deduct |$122.00 |

|18” HG Positive Displacement Blower in lieu of Two Stage Fan System |Deduct |$2,503.00 |

|16” HG Positive Displacement Blower in lieu of Two Stage Fan System |Deduct |$4,685.00 |

|Splash Shield Rear Door |Deduct |$553.00 |

|For Single Stage John Deere Aux Engine with Fluid Coupler |Deduct |$11,380.00 |

Note: Adding or deleting options may affect the availability of other options. Please consult Owen Equipment sales staff.

ATTACHMENT “B1” ENVIRO-CLEAN:

|Req. |Comm. Code |Description |Unit |Unit Price |

|Item | | | | |

|1 |2420 |TRUCK, CATCH BASIN CLEANER, 66,000 lbs. GVWR. WSDOT SPECIFICATION |EACH |$281,963.94 |

| | |0816/0817. Refer to Section 3.3, Specifications. | | |

| | | | | |

| | |Product Bid | | |

| | |Mfg.: International & Vac-Con | | |

| | |Brand/Model: Model 7600-6X4 / V311/100 SHA | | |

| | | | | |

| | |Lead-time: Materials, equipment or services will be delivered within | | |

| | |calendar 210-270 days after receipt of order (ARO). | | |

| | | | | |

| | | | | |

| | | | | |

| | | | | |

Manufacturer’s Parts Discount: 0 % Dated: N/A Copy attached with bid

Manufacturer’s Accessories Discount: 0% Dated: N/A Copy attached with bid

|OPTIONS: | | | |PRICES |

|1. Pusher Axle with a 13,500# rating will be located in front of the | | | |Hendrickson: $10,275.00 |

|drive axles. Hendrickson Model Para lift Ultra Light. The tires shall be | | | |Watson-Chalin SL1190: $8,650.00 |

|255/70R22.5 mounted on 8.25x22.5” aluminum hub piloted wheels. Fender to be | | | |(Watson requires engineering approval) |

|included. | | | | |

|2. Tag Axle with a 13,500# rating and will be located behind the drive | | | |Hendrickson: $10,275.00 |

|axles. Hendrickson Model Para lift Ultra Light. The tires shall be | | | |Watson-Chalin SL1190: $8,650.00 |

|255/70R22.5 mounted on 8.25x22.5” aluminum hub piloted wheels. Fender to be | | | |(Watson requires engineering approval) |

|included. | | | | |

|3. All optional axles shall be cab controlled for deployment only. All | | | |As specified with options 1 & 2 |

|adjustment controls will be located outside, directly behind the cab on the | | | | |

|street side. | | | | |

|4. All optional axles shall raise when the transmission is in reverse | | | |As specified with options 1 & 2 |

|5. When WSDOT chooses the additional rear mounted tag axle a chute shall be| | | |$1,419.11 |

|provided to ensure debris does not fall onto the axle or the unit. | | | | |

ENVIRO-CLEAN CONTINUED:

|6. Provide an option price for an appropriately sized air compressor to | | | | |

|operate the chassis braking system as well as the additional axles. | | | |15.9 CFM Compressor |

|7. Shall provide pricing for a “Suck on the go” feature. | | | |$134.00 |

|8. Power windows and door locks on the chassis. | | | |$293.00 |

|9. Integral front frame extension. | | | |$275.00 |

|10. Cab over Low cab entry chassis. | | | |Volvo VHD64F $114,837.00 |

| | | | |Mack MRU613 $130,501.00 |

|11. ISM 370 Cummins engine. | | | |Not Available |

|12. Fuller 18 Speed manual transmission, with an Easy Pedal Plus clutch and | | | |Delete $8,080.00 |

|a two-piece clutch brake. | | | | |

|13. Fuller Auto Shift Transmission 18 speed | | | |Not Available |

|14. Fuller Auto Shift Transmission 10 Speed | | | |Not Available |

|16. Wireless controls for Boom and Rodder systems (Radio Controlled) | | | |$3,582.00 Excludes Water System |

|17. Add 500 gallons of water carrying capability. | | | |$8,453.00 |

|18. 300 Feet of 1-inch high-pressure hose in lieu of the 1 ¼ inch hose. | | | | |

| | | | |N/C |

|19. CB radio package | | | |$193.00 |

|20. Shall provide a deduct amount for the entire high pressure Rodding/Water| | | |$9,884.25 |

|System. | | | | |

|21. An AM/FM Radio with Weather Band | | | |Included item 10 electrical |

|22. Shall have a hose reel shield to protect the operator in case of hose | | | |$1,295.00 |

|failure. | | | | |

|23. Over weight debris-warning system with a light and audible alarm. | | | |$525.00 |

|24. The ability of the boom to reach 24 feet from the centerline of the | | | |$3,523.00 |

|chassis. | | | | |

|25. Rear Mounted Hose reel, in lieu of a front mounted reel. | | | |$10,140.50 |

ADDITIONAL OPTIONS AVALABLE ON CONTRACT FROM ENVIRO-CLEAN

|[pic] |Phone: 503-491-3393 |

| |Fax: 503-491-2283 |

| |Toll-Free: 800-200-8480 |

| |BLowe@ |

| |EQUIPMENT & SUPPLIES FOR INDUSTRY & PUBLIC WORKS |

Water Capacity up charges

1. Add $3,806.00 for 1,200 gallon Upgrade.

2. Add $4,022.00 for 1,300 gallon upgrade.

| |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

|Booms |

|Fixed Boom - Standard | |$0.00 |

|6' Aluminum Telescoping Boom with Pendant Control Station | |$7,034.00 |

|10' Aluminum Telescoping Boom with Pendant Control Station | |$10,557.00 |

|6' Aluminum Telescoping Boom with 10" Inlet and Pendant Control Station |10" Boom Inlet, Boom and Elbow with 10" to 8" |$10,766.00 |

| |Adapter & 8" hose | |

|10' Aluminum Telescoping Boom with 10" Inlet and Pendant Control Station |10" Boom Inlet, Boom and Elbow with 10" to 8" |$14,289.00 |

| |Adapter & 8" hose | |

|Blower Drives |

|Hydrostatic Drive |Option Price |$7,529.00 |

|Hydrostatic Drive |Included in base price |$0.00 |

|Split Shaft PTO |Standard |$0.00 |

|Hydrostatic Drive Eaton 160cc Upgrade |Option Price |$9,029.00 |

|Hydrostatic Drive Eaton 160cc Upgrade when Hydrostatic is included in base machine |Option Price | |

|price | |$1,500.00 |

|Hose Reels |

|Front Mounted, Fixed, Standard | |$0.00 |

|Front Mounted, Fixed, 800' (1") Capacity | |$2,690.00 |

|Front Mounted, Articulating to Driver Side (Std Pivot) | |$10,433.00 |

|Front Mounted, Articulating to Driver Side, 800' (1") Capacity | |$13,123.00 |

|Front Mounted, Articulating to Passenger Side (Reverse Pivot) | |$10,467.00 |

|Front Mounted, Articulating to Passenger Side, 800' (1") Capacity | |$13,157.00 |

|Rear Mounted, Articulating Hose Reel | |$10,445.00 |

|Rear Mounted, Articulating Hose Reel, 800' Capacity | |$13,123.00 |

|Front Mounted Swivel Hose Reel, 600' (1") Capacity | |$7,500.00 |

|Hose Reel Options |

|Pivoting Shield / Lexan | |$2,135.00 |

|Hose Reel Shield / Lexan | |$1,295.00 |

|Hose Reel Cage | |$896.00 |

|Automatic Level Wind Guide | |$4,619.00 |

|Electro Magnet for outrigger leg | |$3,752.00 |

|Pinch Roller for Automatic Level Wind | |$1,641.00 |

|Water Systems |

|30 gpm/3000 psi Pump - FMC |Pump rating is 40 gpm |$0.00 |

|30 gpm/3000 psi Pump - FMC / Hydro-Excavation Package |Combo Units without Hose Reel |$0.00 |

|60 gpm/2000 psi Pump - FMC | |$0.00 |

|60 gpm/2000 psi Pump - Giant | |$0.00 |

|65 gpm/2000 psi Pump - FMC | |$0.00 |

|65 gpm/2000 psi Pump - Giant | |$0.00 |

|60 gpm/2500 psi Pump - FMC | |$2,746.00 |

|60 gpm/2500 psi Pump - Giant | |$2,746.00 |

|50 gpm/3000 psi Pump - FMC | |$2,746.00 |

|50 gpm/3000 psi Pump - Giant | |$2,746.00 |

|80 gpm/2000 psi Pump - FMC / 4 cyl | |$2,746.00 |

|80 gpm/2000 psi Pump - Giant / 4 cyl | |$3,746.00 |

|80 gpm/2500 psi Pump - FMC / 6 cyl | |$7,002.00 |

|80 gpm/2500 psi Pump - Giant / 6 cyl | |$7,002.00 |

|60 gpm/3000 psi Pump - FMC / 4 cyl | |$4,397.00 |

|65 gpm/3000 psi Pump / 6 cyl - FMC | |$7,272.00 |

|80 gpm/3000 psi Pump / 6 cyl - FMC | |$9,700.00 |

|80 gpm/3000 psi Pump / 6 cyl - Giant | |$9,700.00 |

|120 gpm/2000 psi Water System (includes 500' x 1¼" Hose & 800' Capacity Reel) |FMC or Giant |$14,787.00 |

|Water System Options |

|Winter Recirculating System | |$795.00 |

|Winter Recirculating for Hose Reel & Low Pressure Hand Gun | |$696.00 |

|Winter Recirculating for Hose Reel & High Pressure Hand Gun | |$696.00 |

|Artic Winter Recirculating System |For Hose Reel & Hand Gun with return lines to |$1,000.00 |

| |upper water tanks | |

|Air Purge System | |$645.00 |

|Drivers Side Hand Gun Connection | |$230.00 |

|Rear Hand Gun Connection | |$230.00 |

|Front Bumper Hand Gun Connection | |$268.00 |

|Pre-Tank Water Filter (In-line) | |$230.00 |

|Pre-Tank Water Filter (Y-type) | |$717.00 |

|2½" Water Drain Gate Valve Assembly | |$225.00 |

|1/4 turn ball valve water drain | |$350.00 |

|Automatic Continuous Fill System | |$1,686.00 |

|Folding Spray Bar Assembly with In Cab Controls | |$2,909.00 |

|Variable Flow Valve (Valve Only ) - nozzles required | |$330.00 |

|50' Capacity Retractable Hand Gun Hose Reel |Hose included |$1,581.00 |

|100' Capacity Handgun Hose Reel |Hose Included |$2,778.00 |

|Water Ring Assembly (inlet mounted) | |$1,710.00 |

|Pulsation Feature for Water Pump | |$2,770.00 |

|Lateral Cleaning Kit w/150' x ½" Hose w/Nozzle, Dolly style mounts | |$2,455.00 |

|Lateral Cleaning Kit w/200' x 1/2" Hose w/Nozzle, Permanently Mtd, Electronically | |$4,534.00 |

|Controlled | | |

|Lateral Cleaning Kit w/400' Hose w/Nozzle, Permanently Mtd, Hydraulically | |$5,672.00 |

|Controlled | | |

|Hydro-excavation package, 50' High Press hand gun reel, High Press unloader valve | |$4,568.00 |

|and High Press extendable (5') excavation nozzle with quick disconnect | | |

|Street Flusher, 450 GPM, air actuated spray heads |Consult factory for adaptability for Single |$25,747.00 |

| |Engine Design | |

|Hot Water Diesel Fired Boiler |Consult factory for adaptability |$19,817.00 |

|Water System Accessories |

|Hand Gun Assembly, Low Pressure |Hand Gun Only - no hose |$238.00 |

|Hand Gun Assembly with 25' of ½" hose, Low Pressure | |$492.00 |

|Hydroexcavation lance with ball valve and chisel nozzle (711-8159) straight pipe | |$663.00 |

|Hydroexcavation lance 5' (hand gun style) 680-0318 | |$244.00 |

|10' Hand Gun Hose Extension | |$86.00 |

|25' Hand Gun Hose Extension | |$200.00 |

|30' Hand Gun Hose Extension | |$234.00 |

|50' Hand Gun Hose Extension | |$305.00 |

|Water Ring (Ring Only) | |$358.00 |

|Hand Gun Bracket Assembly | |$53.00 |

|Hand Gun Assembly (2) Handle with Adjustable Spray | |$446.00 |

|Jet Rodder Hose |

|400' x 3/4" 3000 psi/7500 psi - Standard | |$0.00 |

|500' x 3/4" 3000 psi/7500 psi - 100' extra | |$343.00 |

|600' x 3/4" 3000 psi/7500 psi - 200' extra | |$686.00 |

|700' x 3/4" 3000 psi/7500 psi - 300' extra | |$1,029.00 |

|800' x 3/4" 3000 psi/7500 psi - 400' extra | |$1,372.00 |

|1000' x 3/4" 3000 psi/7500 psi - 600' extra | |$2,058.00 |

|400' x 1" 2500 psi/6250 psi - Standard |Standard |$0.00 |

|500' x 1" 2500 psi/6250 psi - 100' extra | |$343.00 |

|600' x 1" 2500 psi/6250 psi - 200' extra | |$686.00 |

|700' x 1" 2500 psi/6250 psi - 400' extra |Requires large hose reel |$1,029.00 |

|800" x 1" 2500 psi/6250 psi - 400' extra |Requires large hose reel |$1,372.00 |

|400' x 1" 3000 psi/7500 psi | |$496.00 |

|500' x 1" 3000 psi/7500 psi - 100' extra | |$997.00 |

|600' x 1" 3000 psi/7500 psi - 200' extra | |$1,465.00 |

|700' x 1" 3000 psi/7500 psi - 300' extra |Requires large hose reel |$1,493.00 |

|800' x 1" 3000 psi/7500 psi - 400' extra |Requires large hose reel |$2,406.00 |

|500' x 1¼" 2500 psi /6250 psi |Standard on 120 gpm water system |$0.00 |

|Spare Rolls of Jet Rodder Hose |

|400' Roll of Jet Rodder Hose |3/4" 3000 psi or 1" 2500 psi |$1,379.00 |

|500' Roll of Jet Rodder Hose |3/4" 3000 psi or 1" 2500 psi |$1,733.00 |

|600' Roll of Jet Rodder Hose |3/4" 3000 psi or 1" 2500 psi |$2,061.00 |

|Debris Body Options |

|Debris Body Flush Out System, 6 jets | |$1,375.00 |

|Debris Body "Power Flush" System, 8 jets | |$1,481.00 |

|Flush Out connection for rear door valve | |$401.00 |

|Centrifugal Compressor Fan Flush Out System | |$926.00 |

|Hydraulic Rear Door Opener |Removes door grabber |$2,913.00 |

|Water & Debris Tanks Tied Together | |$1,762.00 |

|6" Knife Valve, Lower Rear Door Mounted with Cam-Lock | |$1,552.00 |

|6" Knife Valve in Lieu of 5" Butterfly Valve | |$564.00 |

|8" Knife Valve, Lower Rear Door Mounted | |$1,681.00 |

|6" Air operated knife valve/Front Drivers Side Mounted | |$1,872.00 |

|Debris Tank Inspection Hatch , 8" w/steps & handles | |$592.00 |

|Rear, Hydraulic Pump Off System, 200 GPM w/20' Layflat Hose | |$5,450.00 |

|Rear, Hydraulic Pump Off System, 350 GPM w/20' Layflat Hose | |$7,265.00 |

|Rear, Hydraulic Pump Off System, 400 gpm with 20' layflat hose | |$7,265.00 |

|Rear, Hydraulic Pump Off System, 450 gpm with 20' layflat hose | |$9,810.00 |

|Rear, Hydraulic Pump Off System, 575 GPM w/20' Layflat Hose | |$9,810.00 |

|Gravity Drain System; plumbing to mid-passenger side of unit, allowing return of | |$1,450.00 |

|liquids to the manhole | | |

|Front gate valve, for use with Gravity Drain Option |Must Choose Gravity Option |$280.00 |

|High Dump Option, Single Axle (9 Yard) | |$11,345.00 |

|High Dump Option, Tandem Axle | |$14,620.00 |

|Ceramic Coating in Debris Tank, Single Axle | |$3,582.00 |

|Ceramic Coating in Debris Tank, Tandem Axle | |$4,777.00 |

|Industrial Style Rear Door ilo standard door, 16 Yard Units Only | |$4,180.00 |

|Rear splash guard (4 - 8 O'clock) - tank mounted | |$1,462.00 |

|Rear splash guard (3 - 9 O'clock) - tank mounted | |$1,612.00 |

|Rear Splash Shield Diamond Plate Aluminum | |$2,847.00 |

|Water Tank Side Panels, Diamond Plate Aluminum | |$1,313.00 |

|Vacuum Enhancer, Fan or PD, Air Operated | |$3,753.00 |

|Vibrator, Electric | |$3,260.00 |

|Screen over rear (debris body drain) valve (1) only | |$200.00 |

|Wear Plate, Swing Style (Debris Body Drain) | |$795.00 |

|Rubber pad on standard deflector | |$390.00 |

|Electric Vibrator | |$3,259.00 |

|Electrical Options |

|Inspector Cam Camera System with DVR Recording Device |Includes monitor with sun shield, pivot style, |$25,214.00 |

| |self-leveling camera with 6 in-12 in camera | |

| |roller skids, 600 ft of video cable mounted on a | |

| |hydraulic reel, independent hydraulic circuit for| |

| |hydraulic camera reel, DVR recording device | |

| |mounted in monitor, memory card, power cable and | |

| |scan disc reader, and keyboard for data entry. | |

|On Screen Footage for Inspector Cam |For Use with Inspector Cam |$1,417.00 |

|Push Cable Reel Assembly with 150' of cable for Inspector Cam |For Use with Inspector Cam |$3,151.00 |

|Low Water Alarm | |$320.00 |

|Low Water Alarm with Light | |$389.00 |

|Body Load Limit Alarm, Level Indicator | |$525.00 |

|Rear Axle Load Limit Alarm | |$712.00 |

|Front Axle Load Limit Alarm | |$712.00 |

|Auxiliary Engine Kill Switch (Vandalism Protection) | |$100.00 |

|Safety Shut Down Switch for Boom | |$134.00 |

|Vacuum Breaker Override Switch (Vacuum & Drive) | |$134.00 |

|Remote Control (Wireless): Boom, Vacuum Breaker, Throttle & Debris Body (includes |Replaces Standard Pendant |$3,582.00 |

|Hi-Dump, if applicable). Does not include remote cable pendant controls for boom or| | |

|hi dump. | | |

|4 Way Pendant Control Station | |$392.00 |

|6 Way Pendant Control Station (Spare) | |$345.00 |

|Grounding Cable with Screw Clamp & 25' of Cable | |$391.00 |

|Hi Dump pendant control station with 25' cable | |$318.00 |

|Back Up Alarm | |$210.00 |

|Back Up camera with monitor, rear vision | |$2,818.00 |

|Omnibus Electronic Controller System | |$2,000.00 |

|Lighting Options |

|Revolving Light, Front Mounted | |$387.00 |

|Revolving Light, Rear Mounted | |$387.00 |

|Strobe Light, Front Mounted | |$554.00 |

|Strobe Light, Rear Mounted | |$554.00 |

|LED strobe, front mounted | |$738.00 |

|LED strobe, rear mounted | |$738.00 |

|Mirror Mount, each - mount only | |$275.00 |

|LED 4 Strobes - (2) front bumper / (2) rear bumper | |$1,523.00 |

|LED Arrowboard | |$1,990.00 |

|Arrowstick | |$1,230.00 |

|LED Arrowstick | |$1,990.00 |

|Arrowboard, D.O.T., WANCO | |$5,215.00 |

|Flashing Light Bar (4 light) | |$525.00 |

|Hand Held Spot Light | |$349.00 |

|Hand Held Spot Light with 50' Retractable Cord | |$812.00 |

|Additional Hand Light Connection, Specify Location | |$91.00 |

|Boom Mounted Flood Lights | |$449.00 |

|Rear Mounted Flood Lights | |$449.00 |

|Flood Light - Water Pump Work Area | |$239.00 |

|Flood Light - Auxiliary Engine Work Area | |$239.00 |

|Flood Light - Level Wind Guide | |$239.00 |

|Limb Guard for Flood Light - each | |$72.00 |

|Limb Guard for Rear Strobe or Revolving Light - each | |$110.00 |

|ICC - LED Lighting Package | |$1,218.00 |

|Misc Machine Options |

|Ceramic Coated Elbow ilo standard elbow | |$826.00 |

|Heavy Reinforced Elbow "Wear Back" | |$852.00 |

|Heavy Duty Rubber Hose in lieu of Kanaflex (replace standard) |(Limits Boom Rotation) |$994.00 |

|Auxiliary engine control panel (lockable door) |For use with Deutz Auxiliary Engines |$250.00 |

|Filter Bag for Strainer | |$382.00 |

|Cartridge Filter Option for Tandem PD Combo Units | |$7,420.00 |

|Cyclone Separator |Contact factory for adaptability. Cannot be used |$3,774.00 |

| |with Lazy Susan(s) | |

|Hydraulic Power Tool Option, Front Bumper Mounted | |$2,608.00 |

|Hydraulic Power Tool Option, Rear Mounted | |$2,985.00 |

|Long Handle Storage / PVC | |$371.00 |

|Hose Footage Counter (Standard - Driver Side) | |$445.00 |

|Hose Footage Counter (Curb Side) | |$445.00 |

|Digital electronic footage counter | |$2,979.00 |

|Metric Hose Counter (Driver Side) | |$445.00 |

|Offset Manhole Roller 711-0050 | |$292.00 |

|Grate Lifting Hook 711-0474 | |$243.00 |

|Cone Storage Rack | |$320.00 |

|Cone Rack, Hinged Style/Deck | |$577.00 |

|Cone Rack, between bogies, tandem | |$426.00 |

|Rear Mounted Tow Hooks 711-0405 | |$271.00 |

|Centrifugal Compressor Quiet Package | |$2,814.00 |

|Auxiliary Engine Remote Oil Drain | |$213.00 |

|Remote Boom Grease Zerk Assembly (Ground Level - includes water pump drive) | |$1,840.00 |

|Remote Debris Tank Grease Assembly (Ground Level) |Does not include rollers or cams |$1,984.00 |

|Grease Assembly Articulating Hose Reel | |$849.00 |

|Remote Hi-Dump Grease Assembly (Single Axle) | |$1,454.00 |

|Remote Hi-Dump Grease Assembly (Tandem Axle) | |$1,740.00 |

|Automatic Lube System - in addition to manual remote grease options (Vac-Con | |$4,081.00 |

|Module) | | |

|Automatic Lube Kit for Centrifugal Compressor |Available on 2-Stage or 3-Stage Blower |$2,132.00 |

|Hydraulic System Temperature Gauge | |$248.00 |

|Vacuum gauge front bumper location behind reel | |$431.00 |

|Dual Roller Level Wind Guide, plastic (in lieu of single) | |$139.00 |

|Aluminum Single Roller Level Wind Guide, (in lieu of plastic) | |$348.00 |

|Aluminum Dual Roller Level Wind Guide, (in lieu of plastic) | |$522.00 |

|Dual Roller Level Wind Guide w/Hydraulic Extension | |$2,328.00 |

|Plastic engraved decals - adhesive type (ilo standard) | |$811.00 |

|Misc Accessories |

|Hose Guide, spare 665-0004 | |$137.00 |

|Catch Basin Retriever 711-0371 | |$436.00 |

|Manhole Cover Lifting Hook 681-0084 | |$81.00 |

|Cover Shover 681-0143 | |$500.00 |

|5# Fire Extinguisher 711-1326 | |$120.00 |

|First Aid Kit 690-0500 | |$74.00 |

|Triangle Kit 690-0494 | |$74.00 |

|Grease Gun 690-0093 | |$58.00 |

|Vacuum Tubing |

|3' x 8" Aluminum Pipe Extension 800-0063 | |$186.00 |

|4' x 8" Aluminum Pipe Extension 800-0347 | |$204.00 |

|5' x 8" Aluminum Pipe Extension 800-0064 | |$218.00 |

|6' x 8" Aluminum Pipe Extension 800-0089 | |$246.00 |

|7' x 8" Aluminum Pipe Extension 800-0352 | |$271.00 |

|8' x 8" Aluminum Pipe Extension 800-0261 | |$274.00 |

|10' x 8" Aluminum Pipe Extension 800-0133 | |$297.00 |

|6½' x 8" Catch Basin Nozzle with Serrated End 800-0065 | |$283.00 |

|7½' x 8" Catch Basin Nozzle with Serrated End 800-0572 | |$311.00 |

|Non-conducting Catch Basin Nozzle | |$814.00 |

|Leaf Nozzle, 25" x 8" No Holes 800-0088 | |$200.00 |

|8" Adjustable Air Gap | |$330.00 |

|Snorkel Nozzle Kit (Includes 1- 3' pipe) 711-0031 | |$380.00 |

|5' x 5" Snorkel Pipe Nozzle Extension 800-0127 | |$121.00 |

|3' x 8" Clear Demo Tube 711-1255 | |$443.00 |

|Circular Operator Handle 711-0172 | |$204.00 |

|8" to Double 4" Y Adapter 800-0476 | |$292.00 |

|8" Flange to 6" Sleeve Adapter 800-0351 | |$144.00 |

|8" Quick Clamp, spare, 680-0015 | |$29.00 |

|8" Gasket with Holes 690-0025 | |$7.00 |

|8" Rubber Debris Hose / Per Foot 680-0001 | |$62.00 |

|8" Hose End 800-0097 | |$76.00 |

|8" Power Clamp 680-0016 | |$86.00 |

|Rubber Kanaflex hose end for CB Tube/Hydroexcavation | |$89.00 |

|5' x 6" Aluminum Pipe |6" Intake System |$218.00 |

|3' x 6" Aluminum Pipe |6" Intake System |$185.00 |

|6' x 6" Aluminum Pipe |6" Intake System |$246.00 |

|6" Quick Clamp |6" Intake System |$39.00 |

|6" Adjustable Air Gap |6" Intake System |$329.00 |

|Pipe Storage Racks - 4 standard per unit |

|Additional Pipe Rack(s) | |$143.00 |

|Vertical Pipe Rack (Holds 3 Pipes) | |$430.00 |

|Lazy Susan Pipe Rack ( Holds 4 Pipes - Drivers Side) |Cannot be used with Cyclone Separator |$1,906.00 |

|Lazy Susan Pipe Rack (Holds 5 Pipes - Drivers Side) |Cannot be used with Cyclone Separator |$2,140.00 |

|Hydraulic Folding Pipe Rack (3), Mtd Rear Door | |$2,239.00 |

|Hydraulic Folding Pipe Rack (3), Tank Mtd, Driver Side | |$2,239.00 |

|Hydraulic Folding Pipe Rack (3), Tank Mtd, Curbside | |$2,239.00 |

|Additional Side Steps (4 are Standard) | |$81.00 |

|Tool / Storage Boxes |

|Storage Box Behind Cab 16" x 42" x 96" |Std on units with 1300 & 1500 gallons of water |$1,839.00 |

|Aluminum Storage Box Behind Cab 16" x 42" x 96" | |$3,950.00 |

|Aluminum Storage Box Behind Cab in lieu of Standard Steel | |$2,111.00 |

|(2) Roll out shelves for storage box behind cab | |$1,230.00 |

|Side Mounted Tool Box 35" x 14" x 24" | |$611.00 |

|35" x 14" x 24" Aluminum Side Mounted Tool Box, ea (ilo steel) | |$383.00 |

|16" x 13" x 72" Aluminum Side Mounted Tool Box, ea (ilo steel) | |$1,194.00 |

|2 ) 20" x 20" x 20" Steel Rear Tool Boxes, mtd each side of extended frame units, | |$750.00 |

|1000 or 1300 gallons only | | |

|2 ) 20" x 20" x 20" Aluminum Rear Tool Boxes, mtd each side of extended frame | |$1,275.00 |

|units, 1000 or 1300 gallons only | | |

|12" x 18" x 96" Steel Tool Box, mounts under storage box behind cab | |$850.00 |

|12" x 18" x 96" Aluminum Tool Box, mounts under storage box behind cab | |$850.00 |

|Dry Decking - side tool boxes (6' & 35") - each | |$167.00 |

|Dry Decking - behind cab storage box (96") | |$410.00 |

|3/4" Spare Nozzles |

|3/4" Nozzle rack | |$90.00 |

|3/4" 30 gpm - Standard Nozzle, spare | |$257.00 |

|3/4" 50 gpm - Standard Nozzle, spare | |$257.00 |

|3/4" 30 gpm Penetrator Chisel - Standard, spare | |$297.00 |

|3/4" 50 gpm Penetrator Chisel - Standard, spare | |$297.00 |

|3/4" Nozzle Pipe Assembly (skid), spare | |$67.00 |

|3/4" 30 gpm Grenade Nozzle | |$440.00 |

|3/4" 50 gpm Grenade Nozzle | |$440.00 |

|Aluminum Storm Nozzle 3/4" 30 gpm | |$352.00 |

|Aluminum Storm Nozzle 3/4" 50 gpm | |$352.00 |

|3/4" Storm Nozzle Pipe Assembly (skid) | |$77.00 |

|3/4" 30 gpm Rotating Spinning Nozzle | |$753.00 |

|3/4" 50 gpm Rotating Spinning Nozzle | |$753.00 |

|3/4" 30 gpm Little Bruce 5" Culvert Nozzle | |$1,108.00 |

|3/4" 50 gpm Little Bruce 5" Culvert Nozzle | |$1,108.00 |

|3/4" Brass Flusher Nozzle | |$53.00 |

|1" Spare Nozzles |

|1" Nozzle rack | |$90.00 |

|Aluminum Storm Nozzle 1" 60 gpm | |$296.00 |

|Aluminum Storm Nozzle 1" 70 gpm | |$296.00 |

|Aluminum Storm Nozzle 1" 80 gpm | |$296.00 |

|1" Storm Nozzle Pipe Assembly (skid) | |$77.00 |

|1" 60 gpm Standard Nozzle, spare | |$296.00 |

|1" 70 gpm Standard Nozzle, spare | |$296.00 |

|1" 80 gpm Standard Nozzle, spare | |$296.00 |

|Standard nozzle | |$296.00 |

|1" 60 gpm Penetrator Chisel - Standard, spare | |$340.00 |

|1" 70 gpm Penetrator Chisel - Standard, spare | |$340.00 |

|1" 80 gpm Penetrator Chisel - Standard, spare | |$340.00 |

|Penetrator nozzle | |$340.00 |

|1" Nozzle Pipe Assembly (skid), spare | |$67.00 |

|1" 60 gpm Grenade Nozzle | |$639.00 |

|1" 70 gpm Grenade Nozzle | |$639.00 |

|1" 80 gpm Grenade Nozzle | |$639.00 |

|Grenade nozzle | |$639.00 |

|1" 60 gpm Rotating Spinning Style | |$752.00 |

|1" 70 gpm Rotating Spinning Style | |$752.00 |

|1" 80 gpm Rotating Spinning Style | |$752.00 |

|Little Bruce culvert nozzle | |$1,639.00 |

|1" 60 gpm Big Otto 8" Culvert Nozzle | |$1,639.00 |

|1" 70 gpm Big Otto 8" Culvert Nozzle | |$1,639.00 |

|1" 80 gpm Big Otto 8" Culvert Nozzle | |$1,639.00 |

|1" Brass Flusher Nozzle | |$63.00 |

|Spare Nozzles |

|Standard nozzle | |$257.00 |

|Rotating Spinning Nozzle | |$752.00 |

|Big Otto culvert nozzle | |$1,639.00 |

|Leader Hose |

|3/4" x 10' Length Leader Hose | |$206.00 |

|1" x 10' Length Leader Hose | |$206.00 |

|1-1/4" x 10' Length Leader Hose | |$206.00 |

|3/4" x 15' Length Leader Hose | |$311.00 |

|1" x 15' Length Leader Hose | |$311.00 |

|1-1/4" x 15' Length Leader Hose | |$311.00 |

|3/4" x 20' Length Leader Hose | |$330.00 |

|1" x 20' Length Leader Hose | |$330.00 |

|1-1/4" x 20' Length Leader Hose | |$330.00 |

|3/4" x 25' Length Leader Hose | |$397.00 |

|1" x 25' Length Leader Hose | |$397.00 |

|1-1/4" x 25' Length Leader Hose | |$397.00 |

|3/4" x 30" Length Leader Hose, Spare | |$97.00 |

|1" x 30" Length Leader Hose, Spare | |$97.00 |

|1-1/4" x 30" Length Leader Hose, Spare | |$97.00 |

|Swedge Tools |

|Hydraulic Swage Kit | |$2,314.00 |

|Manual Swage Kit | |$1,472.00 |

|1" Swage End | |$58.00 |

|3/4" Swage End | |$54.00 |

|Root Cutter |

|Rotating Chain Scraper: 1", 6", 8" & 10" | |$6,615.00 |

|1" to 3/4" Bushing for Rotating Chain Scraper | |$10.00 |

|Manuals |

|Vac-Con Manual, spare |One manual standard per unit |$155.00 |

|Paint - Module Options |

|Undercoat - Vac-Con Module & Chassis | |$1,610.00 |

|Paint Tool Box/Storage Boxes to match Unit |Standard - Black Powder Coating |$591.00 |

|Metallic paint Option | |$2,425.00 |

|Paint - Module Stripe Options |

|Reflective Striping, Other than standard colors |Avail colors: Black, Red, Orange, Yellow, Green, |$530.00 |

| |Brown | |

|Standard Striping Package - White 692-5204-01 | |$0.00 |

|Standard Striping Package - Blue 692-5204-02 | |$0.00 |

|Painted Module Side Stripes - Other Specify | |$401.00 |

|Painted Module Boom Stripes - Other Specify | |$401.00 |

|Paint - Chassis Options |

|Vac-Con to Paint Cab - Specify Color | |$2,500.00 |

|Paint - Chassis Stripe Options |

|Cab "Z" Striping Package, specify Color |Avail colors: White, Blue, Black, Red, Orange, |$960.00 |

| |Yellow, Green, Brown | |

|Cab "Small Stripes" Striping Package, Specify Color |See available colors |$960.00 |

|Cab Painted with Flames | |$2,400.00 |

| |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

| | | |

|Pool Truck Modifications |

|Roll Bogies, Single Axle | |$2,150.00 |

|Roll Bogies, Tandem Axle | |$2,750.00 |

|Air dryer - Bendix AD-9 | |$1,107.00 |

|Air dryer - Bendix AD-IP | |$1,323.00 |

|Air horn - single base | |$625.00 |

|Air restriction gauge, dash mounted | |$231.00 |

|Air seat, passenger | |$1,035.00 |

|2-man passenger seat | |$1,045.00 |

|Block Heater | |$425.00 |

|(Canadian) Daytime Running Lights - Sterling Only (std on IH) | |$525.00 |

|Metric speedometer | |$375.00 |

|Heated motorized mirrors | |$1,828.00 |

|Silicone hoses | |$566.00 |

|Front Mud Flaps | |$106.00 |

|Transmission temperature gauge | |$395.00 |

|Fuel/Water Separator - Sterling Only (std on IH) | |$722.00 |

|Spare tire & rim 385/65Rx22.5 - Goodyear | |$1,275.00 |

|Spare tire & rim 425/65Rx22.5 - Goodyear | |$1,590.00 |

|Spare tire & rim 11R22.5 - Goodyear | |$795.00 |

|Spare front wheel (22.5x12.25) | |$450.00 |

|Spare rear wheel (8.25x12.25) | |$140.00 |

|12 ton jack & lug wrench | |$223.00 |

|Chassis Parts Catalog | |$334.00 |

|Chassis Service Manual | |$334.00 |

|Chassis Operators Manual | |$35.00 |

|Parts Manual on CD-Rom | |$350.00 |

|Service Manual on CD-Rom | |$350.00 |

|Extended Warranties |

|Deutz 2012/4-Cylinder 3 years/4,500 hrs | |$1,150.00 |

|Deutz 2012/4-Cylinder 4 years/5,500 hrs | |$1,850.00 |

|Deutz 2012/4-Cylinder 5 years/6,500 hrs | |$3,275.00 |

|Allison Series 3000 5-year/unlimited mileage |Requires TrandSynd Synthetic Transmission Fluid |$1,310.00 |

| |or TES-295 | |

|Allison Series 4500 5-year/unlimited mileage |Requires TrandSynd Synthetic Transmission Fluid |$2,220.00 |

| |or TES-295 | |

|IH 7400 ESC: 36 mo./100,000 miles - includes base vehicle and DT Engine | |$1,500.00 |

|IH 7400 ESC: 60 mo./100,000 miles - includes base vehicle and DT Engine | |$3,200.00 |

11Yard in Lieu of 9 Yard Debris Tank N/C

|12Yard in Lieu of 9 Yard Debris Tank | |$4,143.00 |

|624 PD 2950 CFM | |$16,107.00 |

|824 PD 3600 CFM | |$16,873.00 |

|827 PD 4200 CFM | |$19,967.00 |

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download