Education system – India
Education system ? India
In general, most Indian transcripts contain grading systems that use divisions or classes, based on the average percentage marks during the whole of the program. Some institutions however decide the Class/Divisions on the basis of the final examination result.
Some institutions use a grade point system with letter grades, which may be associated with a percentage mark.
The pass mark for individual subjects can be as low as 33%, though the graduation mark may be higher. First Divisions/Class is usually 60%.
To ensure you use Postgraduate Coursework Entry Score Calculator correctly, UNSW recommends you follow these guidelines:
1. Transcripts that only show subject marks Here are the steps for calculating the entry mark:
1. Go to the Numerical grades calculator 2. Enter the maximum mark possible (normally 100) 3. Enter the minimum passing mark (normally 33) 4. Calculate the average mark by adding all of the marks on the transcript and dividing by the number of subjects. 5. Enter the average mark 6. Click the button to calculate the entry mark
Maximum Mark: Pass Mark: Average Mark:
100 33
Calculate Entry Mark
Entry Mark =
If the result is less than or equal to 5% below the cut-off for the program, submit an application.
2. Transcripts that show Divisions/Class grades Here are the steps for calculating the entry mark:
1. Go to the Non-numerical grade calculator 2. Enter each possible grade name (see below). 3. Enter the range of marks for each description (see below) 4. Enter a count of 1 against the division/class achieved and a zero against the others 5. Enter the Division/Class that represents the minimum passing grade 6. Click the button to calculate the entry mark
Grade Name: Grade Name: Grade Name: Grade Name:
First with Distinction First Second Third/Pass
Mark Range From: Mark Range From: Mark Range From: Mark Range From:
Which is Grade Name represents the minimum passing grade? Calculate Entry Mark Entry Mark =
70
Mark Range To:
60
Mark Range To:
45
Mark Range To:
33
Mark Range To:
Third/Pass
100 79 59 44
Count of Grades: Count of Grades: Count of Grades: Count of Grades:
If the result is less than or equal to 5% below the cut-off for the program, submit an application.
3. Transcripts that show description grades Here are the steps for calculating the entry mark:
1. Go to the Non-numerical grade calculator 2. Enter each possible grade name (see below) 3. Enter the range of marks for each description 4. Enter the count of each grade description on the transcript 5. Enter the grade name that represents the minimum passing grade (usually marginal) 6. Click the button to calculate the entry mark
Grade Name: Grade Name: Grade Name: Grade Name: Grade Name: Grade Name: Grade Name: Grade Name:
Outstanding Excellent Very Good Average Below Average Marginal Poor Very Poor
Mark Range From: Mark Range From: Mark Range From: Mark Range From: Mark Range From: Mark Range From: Mark Range From: Mark Range From:
Which is Grade Name represents the minimum passing grade? Calculate
Entry
Mark
Entry Mark =
90
Mark Range To:
80
Mark Range To:
70
Mark Range To:
60
Mark Range To:
50
Mark Range To:
40
Mark Range To:
20
Mark Range To:
0
Mark Range To:
Marginal
100 89 79 69 59 49 39 19
Count of Grades: Count of Grades: Count of Grades: Count of Grades: Count of Grades: Count of Grades: Count of Grades: Count of Grades:
If the result is less than or equal to 5% below the cut-off for the program, submit an application.
4. Transcripts that show 10 point systems (9 letter grades) Here are the steps for calculating the entry mark:
1. Go to the Numerical grades calculator 2. Enter the maximum mark possible (usually 10) 3. Enter the minimum passing mark (usually 4) 4. Calculate the average mark by adding all of the points on the transcript and dividing by the number of units. 5. Enter the average mark. 6. Click the button to calculate the entry mark.
Maximum Mark:
10
Pass Mark:
4
Average Mark:
Calculate
Entry
Mark
Entry Mark =
Note: Standard 10-point System:
A = 10 A- = 9 B =8 B- = 7 C =6 C- = 5 D = 4 (minimum passing grade) E =2 F =0
If the result is less than or equal to 5% below the cut-off for the program, submit an application.
5. Transcripts that show 7 point systems (7 letter grades) Here are the steps for calculating the entry mark:
1. Go to the Numerical grades calculator 2. Enter the maximum mark possible (usually 7) 3. Enter the minimum passing mark (usually 3) 4. Calculate the average mark by adding all of the points on the transcript and dividing by the number of units. 5. Enter the average mark. 6. Click the button to calculate the entry mark.
Maximum Mark:
7
Pass Mark:
3
Average Mark:
Calculate
Entry
Mark
Entry Mark =
Note: Standard 7-point System:
O =7 A =6 B =5 C =4 D = 3 (minimum passing grade) E =2 F =1
If the result is less than or equal to 5% below the cut-off for the program, submit an application.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- education system in uae
- higher education system in america
- education system failing in america
- higher education in india pdf
- education system in india ppt
- education system in india today
- education system in india pdf
- education in india today
- education system in india essay
- higher education in india project
- education in india ppt presentation
- women education in india pdf