Bluegrass Community and Technical College



Engineering and Electronics Technology – Computer Maintenance TrackDiplomaCoordinator: John Jors (john.jors@kctcs.edu)859-246-6718Student Name: Student ID: Students must meet college readiness benchmarks as identified by the Council on Postsecondary Education or remedy the identified skill deficiencies. Semester SEQ Semester \* ARABIC 1CoursesCr. Hrs.TermGradePrerequisitesNotesELT 110 Circuits I 5ELT 114 Circuits II5ELT 110 Digital Literacy3See Additional InformationMAT 126 Tech Algebra and Trig ORhigher-level Quantitative Literacy course3KCTCS Placement PolicyTotal Semester Credit Hours16Semester SEQ Semester \* ARABIC 2CoursesCr. Hrs.TermGradePrerequisitesNotesELT 210 Devices I4ELT 110 Technical Elective4ELT 214ELT 214 RecommendedCIT 111 Comp. Hardware & Software OR ELT 232 Comp. Software Maint. ANDELT 234 Comp. Hardware Maintenance4 – 6 CIT 111- CIT 105ELT 232–Digital LiteracyELT 234–Digital Literacy CIT 111 RecommendedWritten Communication OROral Communications 3KCTCS Placement PolicyTotal Semester Credit Hours15 – 17Semester SEQ Semester \* ARABIC 3CoursesCr. Hrs.TermGradePrerequisitesNotesELT 120 Digital I3Online OnlyELT 220 Digital II3ELT 120 Online OnlyCIT 160 Intro to Networking Concepts OR CIT 161 Networking Fundamentals4Prerequisite or Coreq: CIT 111 BRX 120 Basic Blueprint Reading OR CAD 100 Intro to Computer Aided Design 3 – 4See Additional Information Total Semester Credit Hours13 – 14Semester SEQ Semester \* ARABIC 4CoursesCr. Hrs.TermGradePrerequisitesNotesELT 289 Eng. & Elec. Tech. Capstone1ELT 120 and 210Online OnlyTechnical Elective 5COE 199 Cooperative Education OR, COED 198 Practicum 1 – 2 See Additional InformationTotal Semester Credit Hours7 – 9Total Diploma Credit Hours62 – 65Graduation Requirements:25% or more of Total Diploma Credit Hours must be earned at BCTC.Cumulative GPA must be 2.0 or higher.Advisor Name_______________________________ Advisor Contact _______________________________Additional InformationStudents must complete MAT 065 or demonstrate an equivalent placement level before enrolling in an ELT class.Students must earn a grade of C or better in all technical courses and a cumulative 2.0 GPA to continue in the Engineering and Electronics Technology Program.CIT 111 will substitute for both ELT 232 and ELT 234. If CIT 111 (4 credit hours) is used in place of ELT 232 (3 credit hours) and ELT234 (3 credit hours) leaves a difference of 2 credit hours, these 2 hours may need to be made up to meet the minimum 62 credit hour requirement for the degree.General Education courses (math, writing, or oral communications) can be taken in any order. It is recommended that math be taken in the first semester if possible.Digital Literacy, BRX 120 or CAD 100 can be taken in any semester.Students who take CAD 100 to meet the Digital Literacy requirement must take an additional 3 credit hours of technical electives in place of the CAD 100/BRX 120 requirements.For COE 199, the completion of at least 12 credit hours in the Associate in Applied Science Degree, diploma, or certificate program of study, and/or marketable skills in the area in which the student is enrolled in, and minimum cumulative grade point average (GPA) of 2. For COED 198, consent of the instructor is a prerequisite.Technical Electives can be any EET, ELT, IMT, CIT, ISM, CAD, ICT, MFG, PLW, WLD or any other courses approved by the Engineering and Electronics Technology Program Coordinator.Embedded CredentialsCredentialTitleRequirementsTotal Cr. HoursCertificateComputer Maintenance TechnicianCIT 105, ELT 110, ELT 120, ELT 232, ELT 23417CertificateElectronics TesterELT 110, ELT 114, ELT 12013Certificate Requirements:25% or more of Total Certificate Credit Hours must be earned at BCTC.Grade of C or higher in each course required for certificate.Reviewed by: John Jors Effective Term: Spring 2022Review Date: 11-15-2021 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download