EPA Office of Water - Water Quality Exchange (OWWQX) XML ...
EPA Office of Water - Water Quality Exchange (WQX) XML Schema
Schema Review Conformance Report
ITS-ESE Task Order No.: 008
Contract No.: 68-W-04-005
June 2, 2006
Developed for:
United States Environmental Protection Agency
Office of Water
1200 Pennsylvania Avenue, NW
Washington, DC 20460
Submitted to:
Network Steering Board,
Technical Resources Group
Developed by:
[pic]
National Environmental Information
Systems Engineering Center (NEISEC)
1010 N. Glebe Road
Arlington, VA 22201
Document No.: 008-TRG-WPR-0001
Version No.: 1.0b
Table of Contents
Document Status 1-1
Section 1. Introduction 1-2
Section 2. WQX 1.0 Review Methodologies, Results, and Recommendations 3
2.1 World Wide Web Consortium (W3C) Conformance 4
2.1.1 Methodology 4
2.1.2 Review Results 4
2.1.3 Recommendations 4
2.2 XML Design Rules and Conventions Conformance 5
2.2.1 Methodology 5
2.2.2 Review Results 5
2.2.3 Recommendations 6
2.3 Core Reference Model (CRM) Shared Schema Component (SSC) Conformance 7
2.3.1 Methodology 7
2.3.2 Review Results 7
2.3.3 Recommendations 8
2.4 EDSC Data Standards Conformance 9
2.4.1 Methodology 9
2.4.2 Review Results 9
2.4.3 Recommendations 12
Section 3. Conclusion 13
Appendix A: W3C Schema Validation Results 14
Appendix B: EN Design Rules & Conventions Validation Results 16
Appendix C: EDSC Standards Validation Results 19
Document Status
Title: WQX v1.0 XML Schema Review Conformance Report
Author: Douglas Timms, enfoTech & Consulting, Inc.
Subject: Full evaluation of the candidate WQX XML schema against design guidance.
Description: This document describes the findings resulting from a comparison of the Office of Water – Water Quality Exchange (WQX) schema against the guidelines for schema design as recommended by the National Environmental Information Exchange Network (NEIEN).
Publisher: EPA Office of Water
Contributors: Douglas Timms (enfoTech), Robert King (EPA OW), Lee Manning (EPA OW), Lynn Singleton (Lockheed Martin), Dwane Young (EPA OW)
Date: 5/31/2006 (revision date)
Comment Period: The comment period will be set by the Technical Resources Group.
Commenting Forum: Comments are to be exchanged via contributors and reviewer’s email.
Type: Report
Source: TRG/Schema Workgroup, Schema Review Process for Schema Developers
Changes: Initial production-ready version
Coverage: It is expected that this schema will cover the reporting of water quality data to EPA Office of Water. This will cover data from organizations (and States and Tribes) which generate water quality data of interest to EPA that either do not or will not ever operate a local copy of STORET, as well as those who currently do use STORET for reporting to EPA.
Introduction
The National Environmental Information Exchange Network (EN) has created a schema review process to promote consistency and quality in XML schema. Through this process, schema are evaluated for conformance to EN standards in four areas:
• Conformance with the World Wide Web Consortium (W3C) XML schema requirements and standards
• Conformance with EN Design Rules and Conventions (DRCs) and XML Architecture Agreements
• Conformance with the Core Reference Model (CRM) and Shared Schema Components (SSC)
• Conformance with applicable data standards, especially those created by the Environmental Data Standards Council (EDSC)
This Schema Review Conformance Report is prepared on behalf of the EPA Office of Water to provide an analysis of the Office of Water – Water Quality Exchange (WQX) XML Schema Version 1.0 in order to approve/certify the schema for the Exchange Network use. This report provides information about conformance of the schema to the established criteria listed above, as well as the methodology used to determine conformance.
The WQX schema is expected to be the primary schema for the reporting of water quality information to EPA Office of Water. This will cover data from organizations (and States and Tribes) which generate water quality data of interest to EPA that either do not or will not ever operate a local copy of STORET, as well as those who currently do use STORET for reporting to EPA. The schema has been designed so that it can handle a variety of water quality data, including water, biological tissue, and sediment samples. The schema can also accommodate data reported from data loggers.
WQX 1.0 Review Methodologies, Results, and Recommendations
As outlined in the Schema Review Process for Schema Developers guidance document, the schema review process consisted of performing the following steps:
1. Determine the initial review requirements (as outlined in the Schema Review Process for Schema Developers guidance document)
2. Perform the schema review
a. Check for conformance with W3C schema standards
b. Review schema for conformance with EN Design Rules and Conventions
c. Compare the schema with CRM and CRM2
d. Review schema for conformance with data standards
3. Prepare the schema conformance report
4. Submit the conformance report along with the schema and supporting documents
The schema review utilized a number of documents which were developed during the schema design process. These documents are also included in the Schema Review Submission Package for consideration by the EN Technical Resources Group (TRG). The Schema Review Submission Package contains the following files:
1. Schema Review Conformance Report
2. XML Schema files (30)
3. Schematron schema file
4. Data Exchange Template (DET) and code lists spreadsheet
The format of this Schema Review Report was based on previous Schema Review Conformance Reports used by the Technical Resource Group (TRG) as well as guidance outlined in the TRG’s Schema Review Process for Schema Developers.
1 World Wide Web Consortium (W3C) Conformance
Since the schemas are written in XML format, there are two (2) levels of error checks that must be performed to determine whether the XML schema conforms to the specification defined by W3C. The first level error check verifies if an XML schema is well-formed – ensures that the schema conforms to the XML syntax. A well-formed XML schema is syntactically correct, however, it does not verify the accuracy of the schema content. The second level error check looks for missing elements, incorrect element order, and invalid occurrences of an element within the schema. The schema must pass the first level error check to proceed to the second level.
1 Methodology
To validate the schema against the W3C standards, the following XML schema processors were used:
|Tool Name |URL |Description |
|Altova XML Spy 2006 sp2 | |Altova XMLSpy® is the industry standard XML development environment for |
| | |modeling, editing, debugging, and transforming all XML technologies, then |
| | |automatically generating runtime code in multiple programming languages. |
|IBM Schema Quality | Schema Quality Checker is a program which takes as input an XML Schema |
|Checker 2.2 |ch/xmlsqc |written in the W3C XML schema language and diagnoses improper uses of the |
| | |schema language. |
XML Spy Methodology: The 2 potential root files for the WQX XML schema (WQX_WQX_v1.0.xsd and WQX_WQX_Delete_v1.0.xsd) were opened in XML Spy. These root files reference the other XML schema files. By highlighting the project name, all schemas can be checked and determined if they are well-formed, with valid content.
IBM Schema Quality Checker 2.2: The command line version of the Schema Quality Checker was run against the 2 root XML schema files (WQX_WQX_v1.0.xsd and WQX_WQX_Delete_v1.0.xsd).
2 Review Results
There were no errors reported by the schema validation tools listed in section 2.1.1. The schemas were well-formed and had valid content. Validation result reports are recorded in Appendix A.
3 Recommendations
None
2 XML Design Rules and Conventions Conformance
1 Methodology
The XML Design Rules and Conventions (DRC) for the Environmental Information EN document, published September 2003, was created to ensure that XML schema created for use on the Exchange Network consistently implement XML schema design practices to help promote interoperability between different schema and technical communities. In order to satisfy all requirements specified in the DRC, the XML schemas were reviewed both manually and through the automated Schema Design Tool available from the Facility Registry System (FRS) Web site at . The design rules and conventions were supplemented in 2006 with EN_XML_Schema_Design_Rules_v1.1e.doc.
Automated Tool checking:
The automated Schema Design Tool checks the XML schema for conformance to those design rules for which clear, concise, and consistent specifications have been established that include “Must” or “Must Not” levels of enforcement. Design rules that could not be evaluated by the Schema Design Tool require interpretation by the reviewer inspecting the schemas manually.
As each of the WQX Version 1.0 schemas went through the automated Schema Design Tool checking for certain DRC rules, the tool generated a violation report. The violation report specified the schema file name, the date and time processed, and the detailed information related to each detected violation, such as the violated DRC rule identification number, the rule description, and the schema line number where the violation was detected. Appendix B specifies the summarized violation reports for each of the schema files.
Manual checking:
The XML DRC categorizes its guidelines by chapters of specific topics, and various levels of enforcement (i.e., Must, Must Not, Should, Should Not, and May). Each rule has been assigned a unique identification following the naming convention of combining the chapter and sequence numbers.
2 Review Results
Complete results are provided in Appendix B. In general, the WQX Version 1.0 schemas conformed to the design rules with few violations/exceptions.
Automated Tool Checking:
The Automated Tool found that the schemas were in violation of 2 schema rules (4 total violations), as follows:
• [SD3-9] Data-centric schemas MUST NOT use attributes in place of data elements.
• [SD3-19] Data-centric schemas SHOULD NOT use the “use” indicator when the required value is the default value.
Each rule violation is explained and justified below:
• [SD3-9] Data-centric schemas MUST NOT use attributes in place of data elements
Violation Details: This violation occurs only in the WQX_SimpleContent_v1.0.xsd schema file. The Simple Content file defines several complex types that make use of attributes to define some metadata, such as CodeContexts, CodeListIdentifiers, CodeListVersionIdentifier, and CodeListVersionAgencyIdentifier.
Justification: This information is metadata and is not used in the place of elements, and is a practice commonly used by the Core Reference Model Shared Schema Components (and is also discussed in the ESAR Data Standards). As such, this is not viewed as a violation of the Design Rules & Conventions.
• [SD3-19] Data-centric schemas SHOULD NOT use the “use” indicator when the required value is the default value
Violation Details: This violation occurs only in the WQX_SimpleContent_v1.0.xsd schema file. This refers to the use of the “use” attribute in the definition of complex types as shown below:
Justification: The argument against having the use indicator set to optional is that this is the default behavior and is not viewed as necessary. But this has been included in the schema for the following 2 reasons:
o It is taken from the implementation of the shared schema components (SSC) which use the same approach.
o This implementation follows the UBL recommendation of the use of code lists, as described here: . It is from this UBL approach that the Exchange Network’s SSC approach was derived.
For these reasons, this is not viewed as an improper implementation approach.
Manual Checking:
The manual inspection of the general design rules yielded no deviations from the DRCs. File naming conventions matched the rule and are consistent with other schema on the exchange network. Tag names have been derived using prescribed naming conventions.
3 Recommendations
The 4 violations are included as the result of deliberative design decisions on part of the schema developer.
It is recommended that rule SD3-9 in the automated checker be relaxed since it is currently being applied to all use of attributes - not just those attributes that are used in the place of elements (i.e. meta data).
It is also recommended, that rule SD3-19 be relaxed to allow the incorporation of the CRM shared schema components.
3 Core Reference Model (CRM) Shared Schema Component (SSC) Conformance
The Information Management Work Group (IMWG) under the Exchange Network created the CRM Version 2 to provide the EDSC, TRG, and Exchange Network Partners with guidelines for consistently building and sharing data on the Exchange Network. The WQX Version 1.0 was evaluated against the Shared Schema Components under this schema conformance review effort for its normalization and modularity.
1 Methodology[1]
This process involved breaking down the types on integration into three separate levels:
• High Integration Instances where SSC elements or data types with complex content were directly integrated into the target schema without modification.
• Medium Integration Instances where SSC elements or data types with complex content were modified through the process of XML extension and/or restriction before being included into the target schema.
• Low integration Instances where elements or data types with simple content were integrated into the target schema.
2 Review Results
No data elements could take advantage of the high, medium, or low level of integration with the SSCs. This is because of a design requirement in which all elements needed to have facet length restrictions. This design requirement is preferred since the schema has the precise requirement of feeding an EPA system. By placing the maxLength restriction on the submitted data, it can be assured that the data will more likely be able to enter the target EPA system.
Since all elements needed to have a maxLength facet, and the Shared Schema Components have no maxLength restrictions, the data types and elements could not be directly used from the SSCs without modification.
Instead the schema designers were faced with two design options:
Option A: Use the technique outlined in the SSC Usage Guide for adding facet restrictions on data elements. This technique would result in having every data element and simple/complex type redefined in the SimpleContent file within the WQX namespace, as well as every complex type and SSC element in the standard SSC files, being redefined in the WQX namespace. The result would be two definitions for everything.
Option B: Define simple/complex types and elements in the WQX namespace that are in identical to the type/element definitions in the SSC namespace, except for maxLength restrictions in place. This results in one definition for each simple type and element. Although a direct link to the SSCs is lost, an implied link to the SSCs (in terms of data definitions, tag names, and grouping) is intact.
The schema designers decided when balancing the desire to incorporate SSCs with the desire to build the most easily understood and streamlined (performance) schema, that Option B was the better choice. (The end result is the same: all data elements and datatypes are defined in the WQX namespace.) If only a fraction of the elements had required length restrictions, then the use of the extension/restriction technique to refine the SSCs (Option A) would have been desirable, but since all elements would need to be redefined, Option B had clear advantages.
Given the design approach described above (Option B), complex types were created that mimicked those in the SSC namespace. These include:
|WQX Data Block |Corresponding SSC |
|WQX_ElectronicAddress_v1.0.xsd |SC_ElectronicAddress_v1.0.xsd |
|WQX_MonitoringLocationIdentity_v1.0.xsd |SC_MonitoringLocationIdentity_v1.0.xsd |
|WQX_OrganizationDescription_v1.0.xsd |SC_OrganizationIdentity_v1.0.xsd |
|WQX_ReferenceMethod_v1.0.xsd |SC_ReferenceMethod_v1.0.xsd |
|WQX_Telephonic_v1.0.xsd |SC_Telephonic_v1.0.xsd |
|WQX_SimpleContent_v1.0.xsd |SC_SimpleContent_v1.0.xsd |
All element definitions and tag names preserved those defined in the SSCs.
3 Recommendations
Despite the fact that WQX schema definitions did not directly reference Shared Schema Components, the existence of the SSCs was still valuable. Instead of needing to create an entirely new schema file, the schema designer could instead simply copy the SSC schema file, rename it to the WQX namespace, and add in the maxlength restrictions. This effort saved a lot of time while also ensuring that the definitions and XML tags that appear in the SSCs (thus coming from the EDSC data standards) were incorporated without any typographical or interpretation errors.
4 EDSC Data Standards Conformance
The EDSC data standards provide approved data elements and definitions to provide higher quality of data for data exchange exercises between various data partners. The WQX Schema Version 1.0 was evaluated against the EDSC data standards for conformance.
1 Methodology
This review involved evaluating the conformance of data elements with existing standards. Data standard information was obtained from the EDSC. The 166 elements in the schema were compared against the approved data standards, primarily the Environmental Sampling Analysis & Results and allied standards. These standards are listed here:
|EDSC Data Standard |Version |Status |
|Contact Information |EX000019.2 (1/6/2006) |Approved |
|Latitude/Longitude |EX000017.2 (1/6/2006) |Approved |
|Tribal Identifier |EX000023.2 (1/6/2006) |Approved |
|Environmental Sampling Analysis & Results (ESAR) |EX000001.1 (1/6/2006) |Approved |
|ESAR Project |EX000002.1 (1/6/2006) |Approved |
|ESAR Monitoring Location |EX000003.1 (1/6/2006) |Approved |
|ESAR Field Activity |EX000004.1 (1/6/2006) |Approved |
|ESAR Analysis Results |EX000005.1 (1/6/2006) |Approved |
|Attached Binary Objects |EX000006.1 (1/6/2006) |Approved |
|Measure |EX000010.1 (1/6/2006) |Approved |
|Method |EX000011.1 (1/6/2006) |Approved |
|Sample Handling |EX000014.1 (1/6/2006) |Approved |
During the XML schema development process, each element was created with consideration to the EDSC data standards. Thus, during the XML schema creation, a mapping document was created which cross referenced each of the 166 elements to the data standards.
2 Review Results
A complete listing of the comparison between the XML schema and the EDSC standards is included in Appendix C. This section describes in further the following areas:
1. WQX elements for which no EDSC data standard exists: These are cases where WQX is exchanging an element that has not been covered by any EDSC data standard. This is not seen as a non-conformance; rather this highlights areas of potential expansion of the EDSC data standards.
2. WQX elements that have a discrepancy in a mapping with an EDSC standard element: These are cases where an WQX data element has a corresponding EDSC element, but they do not map completely.
Of the 166 elements, only 15 elements could not find a suitable mapping to the EDSC data standards: thus the EDSC data standards cover about 90% of the data elements in the schema. The 15 elements with no EDSC standard mapping are:
|WQX XML Elements with No corresponding EDSC mapping |
|ID |WQX Schema Element |Justification |
|01.00.03 |OrganizationDescriptionText |No similar element found in ESAR. |
|01.03.01 |AddressTypeName |The standard separates elements for mailing and location address, but the schema combines |
| | |these in an effort to reduce the number of reporting elements required for submission. As |
| | |such, an address type element was needed. |
|02.00.03 |ProjectDescriptionText |The only similar elements in ESAR were ProjectObjectiveText and ProjectOutcomeDescription,|
| | |which were deemed to specific for the needs of the schema. |
|04.00.13 |ActivityAssignmentProjectIdentifier |This is a linkage element; No corresponding element found in EDSC standards at this level |
| | |of hierarchy. |
|04.00.14 |ActivityConductingOrganizationText |This is a linkage element; No corresponding element found in EDSC standards at this level |
| | |of hierarchy. |
|04.02.02 |SampleTissueTaxonomicName |No similar element found in ESAR. |
|04.02.03 |SampleTissueAnatomyName |No similar element found in ESAR. |
|04.03.06 |SampleTransportStorageDescription |No similar element found in ESAR. |
|05.00.01 |DataLoggerLineName |No similar element found in ESAR. |
|05.00.02 |ResultDetectionConditionText |No similar element found in ESAR. |
|05.00.08 |ResultValueTypeName |No similar element found in ESAR. |
|05.03.06 |ResultLaboratoryCommentCode |No corresponding element found in EDSC data standards that specifically relates to the |
| | |laboratory comment code applied to the results. |
|06.00.01 |ActivityGroupIdentifier |No similar element found in ESAR. |
|06.00.02 |ActivityGroupName |No similar element found in ESAR. |
|06.00.03 |ActivityGroupTypeCode |No similar element found in ESAR. |
In addition, several fields were mapped but ended up having differing data element names. Some are very minor and not included in the analysis. Those with more than minor differences are listed here:
|WQX XML Elements with Discrepancy in EDSC mapping |
|ID |WQX Schema Element |EDSC Element Name |Justification |
|multiple |Address related Fields, for example: |Multiple elements in Contact standard, for example: |The EDSC contact standard |
| | | |separates elements for mailing and|
| | |or |location address, but the WQX |
| |Etc. | or |schema combines these into a |
| | |Etc. |collection of generic address |
| | | |fields because (1) in an effort to|
| | | |reduce the number of reporting |
| | | |elements required for submission |
| | | |and (2) to allow capturing of |
| | | |Mailing, Locational, and Shipping |
| | | |address types. As such, an address|
| | | |type element was needed. |
|multiple | | |Business Decision: The team |
| | | |needed to use these elements |
| | | |generically to cover both field |
| | | |activities and laboratory |
| | | |sampling, so broader terms |
| | | |(omitting term ‘Field’, ‘Sample’, |
| | | |or ‘SampleEvent’) were used. |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
|04.00.16 | | |The team chose ActivityCommentText|
| | | |since the term is more generic and|
| | | |also to be consistent with the use|
| | | |of the term “Comments’ in other |
| | | |areas of the schema. |
|04.02.04 |SampleCollectionEquipmentName |FieldActivityEquipment / EquipmentName |Business Decision: Team used term |
| | | |Sampling over FieldActivity to |
| | | |make usage more specific. |
|05.00.03 | | |Business Decision: The team gave |
| | | |this much consideration and felt |
| | | |that CharacteristicName was a more|
| | | |appropriate term since |
| | | |non-substance related field |
| | | |assessment characteristics could |
| | | |be included. |
|multiple |ResultWeightBasisText, ResultTimeBasisText, | |Business Decision: Instead of |
| |ResultTemperatureBasisText, | |breaking these out individually, |
| |ResultParticleSizeBasisText | |ESAR uses the generic Result Basis|
| | | |Category and Result Basis Name, |
| | | |which could be repeated. The team |
| | | |felt that separating out to |
| | | |specific Weight, Time, |
| | | |Temperature, etc elements would be|
| | | |more easily understood by the |
| | | |reporting community. |
|05.03.01 | |LaboratoryOrganizationContact / OrganizationFormalName |Business Decision: WQX team |
| | | |decided not to reference ESAR |
| | | |Laboratory Contact (15 fields), |
| | | |since team needed only 1 field, or|
| | | |having an element name called |
| | | |OrganizationFormalName, which |
| | | |isn't as clear as term used. |
|multiple | | |ESAR uses Detection Limit and |
| | | |Reporting Limit as separate |
| | | |fields. The team decided to |
| | | |combine these into 1 field that |
| | | |could be reported multiple times |
| | | |for each result to simplify the |
| | | |reporting process. A type field is|
| | | |then used to distinguish the type |
| | | |of detection or reporting |
| | | |condition reported. |
3 Recommendations
Data element selection for those that both mapped and did not map exactly to EDSC data standards were chosen carefully and with consistent attempts to make in line with the standards while not sacrificing the functionality of the submission process. WQX was originally created based on a draft version of the data standards and was later “resynchronized” with the final (January 2006) versions of ESAR to resolve additional discrepancies. The remaining discrepancies are the result of various decisions based on business needs.
Conclusion
Based on the findings of the schema review process, the WQX v1.0 is in line with all but a few conformance requirements. These areas of non-conformance have been justified in the report.
As EPA Office of Water WQX pilot activities have been completed, the team recommends publication of the schema on the Exchange Network registry at this time.
Appendix A: W3C Schema Validation Results
Altova XML Spy© 2006
[pic]
IBM Schema Quality Checker 2.2
The IBM Schema Quality Checker 2.2 was run from the command prompt.
[pic]
No errors were found.
Appendix B: EN Design Rules & Conventions Validation Results
|Violations for File : WQX_WQX_v1.0.xsd |
|Tue May 30 09:26:59 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_WQX_Delete_v1.0.xsd |
|Tue May 30 09:27:22 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_Activity_v1.0.xsd |
|Tue May 30 09:27:36 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_ActivityDescription_v1.0.xsd |
|Tue May 30 09:27:45 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_ActivityGroup_v1.0.xsd |
|Tue May 30 09:27:59 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_ActivityLocation_v1.0.xsd |
|Tue May 30 09:28:19 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_AttachedBinaryObject_v1.0.xsd |
|Tue May 30 09:28:29 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_DataQualityIndicator_v1.0.xsd |
|Tue May 30 09:30:16 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_DetectionQuantitationLimit_v1.0.xsd |
|Tue May 30 09:30:33 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_ElectronicAddress_v1.0.xsd |
|Tue May 30 09:31:01 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_LabSamplePreparation_v1.0.xsd |
|Tue May 30 09:31:09 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_Measure_v1.0.xsd |
|Tue May 30 09:31:41 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_MeasureCompact_v1.0.xsd |
|Tue May 30 09:32:09 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_MonitoringLocation_v1.0.xsd |
|Tue May 30 09:32:26 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_MonitoringLocationGeospatial_v1.0.xsd |
|Tue May 30 09:32:40 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_MonitoringLocationIdentity_v1.0.xsd |
|Tue May 30 09:32:51 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_Organization_Delete_v1.0.xsd |
|Tue May 30 09:33:02 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_Organization_v1.0.xsd |
|Tue May 30 09:33:11 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_OrganizationAddress_v1.0.xsd |
|Tue May 30 09:33:20 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_OrganizationDescription_v1.0.xsd |
|Tue May 30 09:33:29 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_Project_v1.0.xsd |
|Tue May 30 09:33:39 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_ReferenceMethod_v1.0.xsd |
|Tue May 30 09:33:50 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_Result_v1.0.xsd |
|Tue May 30 09:33:59 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_ResultDescription_v1.0.xsd |
|Tue May 30 09:34:08 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_ResultLabInformation_v1.0.xsd |
|Tue May 30 09:34:18 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_SampleDescription_v1.0.xsd |
|Tue May 30 09:34:31 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_SamplePreparation_v1.0.xsd |
|Tue May 30 09:34:41 EDT 2006 |
|Total Number of Violations = 0 |
|Violations for File : WQX_SimpleContent_v1.0.xsd |
|Tue Apr 04 10:45:29 EDT 2006 |
|1 |[attribute name=AddressPostalCodeContext] |[SD3-19] Data-centric schemas SHOULD NOT use the use |Line Number : 93|
| | |indicator when the required value is the default value. | |
|2 |[attribute name=AddressPostalCodeContext] |[SD3-9] Data-centric schemas MUST NOT use attributes in |Line Number : 93|
| | |place of data elements. | |
|3 |[attribute name=MonitoringLocationIdentifierContext] |[SD3-19] Data-centric schemas SHOULD NOT use the use |Line Number : |
| | |indicator when the required value is the default value. |279 |
|4 |[attribute name=MonitoringLocationIdentifierContext] |[SD3-9] Data-centric schemas MUST NOT use attributes in |Line Number : |
| | |place of data elements. |279 |
|Total Number of Violations = 4 | |
|Violations for File : WQX_Telephonic_v1.0.xsd |
|Tue May 30 09:36:23 EDT 2006 |
|Total Number of Violations = 0 |
Appendix C: EDSC Standards Validation Results
The following table lists the elements in the WQX schema with a mapping to the appropriate EDSC data standard.
|ID |WQX XML Tag |WQX Definition |EDSC Standard |EDSC Data Element |EDSC Definition |EDSC Compliance |
|01.00.01 |OrganizationIdentifier |A designator used to uniquely identify a unique |Contact |OrganizationIdentifier |A designator used to uniquely |Compliant |
| | |business establishment within a context. | | |identify a unique business | |
| | | | | |establishment within a | |
| | | | | |context. | |
|01.00.02 |OrganizationFormalName |The legal designator (i.e. formal name) of an |Contact |OrganizationFormalName |The legal designator (i.e. |Compliant |
| | |organization. | | |formal name) of an | |
| | | | | |organization. | |
|01.00.03 |OrganizationDescriptionText |Information that further describes an organization. | | | |Business Decision: No |
| | | | | | |corresponding element |
| | | | | | |found in EDSC standards.|
|01.01.00 |ElectronicAddress |Header | | | | |
|Header | |This section allows for the description of many | | | | |
| | |electronic addresses per owning Organization. | | | | |
|01.01.01 |ElectronicAddressText |A resource address, usually consisting of the access |Contact |ElectronicAddressText |A resource address, usually |Compliant |
| | |protocol, the domain name, and optionally, the path to | | |consisting of the access | |
| | |a file or location. | | |protocol, the domain name, and| |
| | | | | |optionally, the path to a file| |
| | | | | |or location. | |
|01.01.02 |ElectronicAddressTypeName |The name that describes the electronic address type. |Contact |ElectronicAddressTypeName |The name that describes the |Compliant |
| | | | | |electronic address type. | |
|01.02.00 |Telephonic |Header | | | | |
|Header | |This section allows for the description of many | | | | |
| | |telephone numbers per owning Organization. | | | | |
|01.02.01 |TelephoneNumberText |The number that identifies a particular telephone |Contact |TelephoneNumberText |The number that identifies a |Compliant |
| | |connection. | | |particular telephone | |
| | | | | |connection. | |
|01.02.02 |TelephoneNumberTypeName |The name that describes a telephone number type. |Contact |TelephoneNumberTypeName |The name that describes a |Compliant |
| | | | | |telephone number type. | |
|01.02.03 |TelephoneExtensionNumberText |The number assigned within an organization to an |Contact |TelephoneExtensionNumberText |The number assigned within an |Compliant |
| | |individual telephone that extends the external | | |organization to an individual | |
| | |telephone number. | | |telephone that extends the | |
| | | | | |external telephone number. | |
|01.03.00 |OrganizationAddress |Header | | | | |
|Header | |This section allows for the description of up to three | | | | |
| | |physical addresses for the owning Organization. | | | | |
|01.03.01 |AddressTypeName |Categorizes an address as either location, shipping, or| | | |Business Decision: No |
| | |mailing address. | | | |corresponding element |
| | | | | | |found in EDSC standards.|
|01.03.02 |LocationAddressText |The address that describes the physical (geographic), |Contact |MailingAddressText or |"The exact address where a |Business Decision: WQX |
| | |shipping, or mailing location of an organization. | |LocationAddressText |mail piece is intended to be |exchange did not want |
| | | | | |delivered, including |duplicate elements to |
| | | | | |urban-style street address, |track mailing and |
| | | | | |rural route, and PO Box" |location addresses and |
| | | | | |or |thus combined them using|
| | | | | |"The address that describes |an AddressType |
| | | | | |the physical (geographic) |desgnator. |
| | | | | |location of the front door or | |
| | | | | |main entrance of a facility | |
| | | | | |site, including urban-style | |
| | | | | |street address or rural | |
| | | | | |address." | |
|01.03.03 |SupplementalAddressText |The text that provides additional information about an |Contact |SupplementalAddressText or |The text that provides |Business Decision: WQX |
| | |address, including a building name with its secondary | |SupplementalLocationText |additional information about a|exchange did not want |
| | |unit and number, an industrial park name, an | | |place, including a building |duplicate elements to |
| | |installation name or descriptive text where no formal | | |name with its secondary unit |track mailing and |
| | |address is available. | | |and number, an industrial park|location addresses and |
| | | | | |name, an installation name or |thus combined them using|
| | | | | |descriptive text where no |an AddressType |
| | | | | |formal address is available. |desgnator. |
| | | | | |Or | |
| | | | | |The text that provides | |
| | | | | |additional information to | |
| | | | | |facilitate the delivery of a | |
| | | | | |mail piece, including building| |
| | | | | |name, secondary units, and | |
| | | | | |mail stop or local box numbers| |
| | | | | |not serviced by the U.S. | |
| | | | | |Postal Service. | |
|01.03.04 |LocalityName |The name of a city, town, village or other locality. |Contact |MailingAddressCityName or |The name of the city, town, or|Business Decision: WQX |
| | | | |LocalityName |village where the mail is |exchange did not want |
| | | | | |delivered. |duplicate elements to |
| | | | | |Or |track mailing and |
| | | | | |The name of the city, town, |location addresses and |
| | | | | |village or other locality, |thus combined them using|
| | | | | |when identifiable, within |an AddressType |
| | | | | |whose boundaries (the majority|designator. |
| | | | | |of) the facility site is | |
| | | | | |located. This is not always | |
| | | | | |the same as the city used for | |
| | | | | |USPS mail delivery. | |
|01.03.05 |StateCode |A code designator used to identify a principal |Contact |MailingAddressStateCode or |A code designator used to |Business Decision: WQX |
| | |administrative subdivision of the United States, | |LocationAddressStateCode |identify a principal |exchange did not want |
| | |Canada, or Mexico. | | |administrative subdivision of |duplicate elements to |
| | | | | |the United States, Canada, or |track mailing and |
| | | | | |Mexico. |location addresses and |
| | | | | | |thus combined them using|
| | | | | | |an AddressType |
| | | | | | |designator. |
|01.03.06 |AddressPostalCode |The combination of the 5-digit Zone Improvement Plan |Contact |MailingAddressPostalCode or |The combination of the 5-digit|Business Decision: WQX |
| | |(ZIP) code and the four-digit extension code (if | |LocationAddressPostalCode |Zone Improvement Plan (ZIP) |exchange did not want |
| | |available) that represents the geographic segment that | | |code and the four-digit |duplicate elements to |
| | |is a subunit of the ZIP Code, assigned by the U.S. | | |extension code (if available) |track mailing and |
| | |Postal Service to a geographic location to facilitate | | |that represents the geographic|location addresses and |
| | |mail delivery; or the postal zone specific to the | | |segment that is a subunit of |thus combined them using|
| | |country, other than the U.S., where the mail is | | |the ZIP Code, assigned by the |an AddressType |
| | |delivered. | | |U.S. Postal Service to a |designator. |
| | | | | |geographic location to | |
| | | | | |facilitate mail delivery; or | |
| | | | | |the postal zone specific to | |
| | | | | |the country, other than the | |
| | | | | |U.S., where the mail is | |
| | | | | |delivered. | |
|01.03.07 |CountryCode |A code designator used to identify a primary |Contact |MailingAddressCountryCode or |A code designator used to |Business Decision: WQX |
| | |geopolitical unit of the world. | |LocationAddressCountryCode |identify a primary |exchange did not want |
| | | | | |geopolitical unit of the |duplicate elements to |
| | | | | |world. |track mailing and |
| | | | | | |location addresses and |
| | | | | | |thus combined them using|
| | | | | | |an AddressType |
| | | | | | |designator. |
|01.03.08 |CountyCode |A code designator used to identify a U.S. county or |Contact |LocationAddressCountyCode |A code designator used to |Business Decision: WQX |
| | |county equivalent. | | |identify a U.S. county or |exchange did not want |
| | | | | |county equivalent. |duplicate elements to |
| | | | | | |track mailing and |
| | | | | | |location addresses and |
| | | | | | |thus combined them using|
| | | | | | |an AddressType |
| | | | | | |designator. |
|01.03.09 |TribalCode |The code that represents the American Indian tribe or |Tribal |TribalCode |The code that represents the |Compliant |
| | |Alaskan Native entity. | | |American Indian tribe or | |
| | | | | |Alaskan Native entity. | |
|02.00.00 |Project |Header; | | | | |
|Header | |This section allows for the description of Organization| | | | |
| | |Projects. | | | | |
|02.00.01 |ProjectIdentifier |A designator used to uniquely identify a data |ESAR |Project Identifier |A designator used to uniquely |Compliant |
| | |collection project within a context of an organization.| | |identify the project to | |
| | | | | |organizations sharing data. | |
|02.00.02 |ProjectName |The name assigned by the Organization (project leader |ESAR |Project Name |The name assigned to the |Compliant |
| | |or principal investigator) to the project. | | |Project by the project leader | |
| | | | | |or principal investigator. | |
|02.00.03 |ProjectDescriptionText |Project description, which may include a description of|ESAR |ProjectPurposeText |A summary description of the |Business Decision: Data |
| | |the project purpose, summary of the objectives, or | |OR |purpose of, or the hypothesis |standard breaks out to |
| | |brief summary of the results of the project. | |ProjectObjectiveText |to be |further detail than |
| | | | |OR |tested by the project. |desired for WQX sharing.|
| | | | |ProjectOutcomeDescription |OR | |
| | | | | |Summary of the objectives to | |
| | | | | |be accomplished by the | |
| | | | | |project. | |
| | | | | |OR | |
| | | | | |A brief summary of the results| |
| | | | | |of | |
| | | | | |the project. | |
|02.01.00 |ProjectAttachedBinaryObject |Header; | | | | |
|Header | |This section allows for the association of References | | | | |
| | |and electronic attachments to the project, including | | | | |
| | |formal Project Plan and any other documents, images, | | | | |
| | |maps, photos, laboratory materials, geospatial | | | | |
| | |coverages, and other objects associated with the | | | | |
| | |Project.. | | | | |
|02.01.01 |BinaryObjectFileName |The text describing the descriptive name used to |ESAR - Binary | BinaryObjectFileName |The text describing the |Compliant |
| | |represent the file, including file extension. | | |descriptive name used to | |
| | | | | |represent the file, including | |
| | | | | |file extension. | |
|02.01.02 |BinaryObjectFileTypeCode |The text or acronym describing the binary content type |ESAR - Binary | BinaryObjectFileType |The text or acronym describing|Compliant |
| | |of a file. | | |the binary content type of a | |
| | | | | |file. | |
|03.00.00 |MonitoringLocationIdentity |Header | | | | |
|Header | |This section allows the owning Organization to describe| | | | |
| | |monitoring locations. | | | | |
|03.00.01 |MonitoringLocationIdentifier |A designator used to describe the unique name, number, |ESAR |Monitoring Location Identifier |A designator used to uniquely |Compliant |
| | |or code assigned to identify the monitoring location. | | |identify the Monitoring | |
| | | | | |Location. | |
|03.00.02 |MonitoringLocationName |The designator specified by the sampling organization |ESAR |MonitoringLocationName |The designator specified by |Compliant |
| | |for the site at which sampling or other activities are | | |the sampling organization for | |
| | |conducted. | | |the site at which sampling or | |
| | | | | |other activities are | |
| | | | | |conducted. | |
|03.00.03 |MonitoringLocationTypeName |The descriptive name for a type of monitoring location.|ESAR |MonitoringLocationTypeName |The descriptive name for a |Compliant |
| | | | | |type of monitoring location. | |
|03.00.04 |MonitoringLocationDescriptionText |Text description of the monitoring location. |ESAR |MonitoringLocationDescriptionTex|Text description of the |Compliant (uses EN |
| | | | |t |location of the monitoring |Shared Schema Component |
| | | | | |location. |definition) |
|03.01.00 |MonitoringLocationGeospatial |Header; | | | | |
|Header | |This section allows for the geospatial description of a| | | | |
| | |monitoring station. This section records the location | | | | |
| | |in 3 dimensions. | | | | |
|03.01.01 |LatitudeMeasure |The measure of the angular distance on a meridian north|Lat/Long |LatitudeMeasure |The measure of the angular |Compliant |
| | |or south of the equator. | | |distance on a meridian north | |
| | | | | |or south of the equator. | |
|03.01.02 |LongitudeMeasure |The measure of the angular distance on a meridian east |Lat/Long |LongitudeMeasure |The measure of the angular |Compliant |
| | |or west of the prime meridian. | | |distance on a meridian east or| |
| | | | | |west of the prime meridian. | |
|03.01.03 |SourceMapScaleNumeric |The number that represents the proportional distance on|Lat/Long |SourceMapScaleNumeric |The number that represents the|Compliant |
| | |the ground for one unit of measure on the map or photo.| | |proportional distance on the | |
| | | | | |ground for one unit of measure| |
| | | | | |on the map or photo. | |
|03.01.04 |HorizontalCollectionMethodName |The name that identifies the method used to determine |Lat/Long |HorizontalCollectionMethodName |The name that identifies the |Compliant |
| | |the latitude and longitude coordinates for a point on | | |method used to determine the | |
| | |the earth. | | |latitude and longitude | |
| | | | | |coordinates for a point on the| |
| | | | | |earth. | |
|03.01.05 |HorizontalCoordinateReferenceSystemDa|The name that describes the reference datum used in |Lat/Long |HorizontalCoordinateReferenceSys|The name that describes the |Compliant |
| |tumName |determining latitude and longitude coordinates. | |temDatumName |reference datum used in | |
| | | | | |determining latitude and | |
| | | | | |longitude coordinates. | |
|03.01.06 |VerticalMeasure |Header; | | | | |
| | |The measure of elevation (i.e., the altitude), above or| | | | |
| | |below a reference datum. | | | | |
|03.01.06.01 |MeasureValue |The recorded dimension, capacity, quality, or amount of|Lat/Long |VerticalMeasure / MeasureValue |The recorded dimension, |Compliant |
| | |something ascertained by measuring or observing. | | |capacity, quality, or amount | |
| | | | | |of something ascertained by | |
| | | | | |measuring or observing. | |
|03.01.06.02 |MeasureUnitCode |The code that represents the unit for measuring the |Measure |VerticalMeasure / |The code that represents the |Compliant |
| | |item. | |MeasureUnitCode |unit for measuring the item. | |
|03.01.07 |VerticalCollectionMethodName |The name that identifies the method used to collect the|Lat/Long |VerticalCollectionMethodName |The name that identifies the |Compliant |
| | |vertical measure (i.e. the altitude) of a reference | | |method used to collect the | |
| | |point. | | |vertical measure (i.e. the | |
| | | | | |altitude) of a reference | |
| | | | | |point. | |
|03.01.08 |VerticalCoordinateReferenceSystemDatu|The name of the reference datum used to determine the |Lat/Long |VerticalCoordinateReferenceSyste|The name of the reference |Compliant |
| |mName |vertical measure (i.e., the altitude). | |mDatumName |datum used to determine the | |
| | | | | |vertical measure (i.e., the | |
| | | | | |altitude). | |
|03.01.09 |CountryCode |A code designator |Contact |MailingAddressCountryCode or |A code designator used to |Business Decision: No |
| | | | |LocationAddressCountryCode |identify a primary |direct link found in |
| | | | | |geopolitical unit of the |ESAR-Monitoring |
| | | | | |world. |location, so definitions|
| | | | | | |pulled from Contact |
| | | | | | |standard. |
|03.01.10 |StateCode | |Contact |MailingAddressStateCode or |A code designator used to |Business Decision: No |
| | | | |LocationAddressStateCode |identify a principal |direct link found in |
| | | | | |administrative subdivision of |ESAR-Monitoring |
| | | | | |the United States, Canada, or |location, so definitions|
| | | | | |Mexico. |pulled from Contact |
| | | | | | |standard. |
|03.01.11 |CountyCode | |Contact |LocationAddressCountyCode |A code designator used to |Business Decision: No |
| | | | | |identify a U.S. county or |direct link found in |
| | | | | |county equivalent. |ESAR-Monitoring |
| | | | | | |location, so definitions|
| | | | | | |pulled from Contact |
| | | | | | |standard. |
|03.02.00 |AttachedBinaryObject |Header; | | | | |
|Header | |This section allows for the association of References | | | | |
| | |and electronic attachments to the Station description | | | | |
| | |including any other documents, images, maps, photos, | | | | |
| | |laboratory materials, geospatial coverages, and other | | | | |
| | |objects associated with the Project.. | | | | |
|03.02.01 |BinaryObjectFileName |The text describing the descriptive name used to |ESAR - Binary | BinaryObjectFileName |The text describing the |Compliant |
| | |represent the file, including file extension. | | |descriptive name used to | |
| | | | | |represent the file, including | |
| | | | | |file extension. | |
|03.02.02 |BinaryObjectFileTypeCode |The text or acronym describing the binary content type |ESAR - Binary | BinaryObjectFileType |The text or acronym describing|Compliant |
| | |of a file. | | |the binary content type of a | |
| | | | | |file. | |
|04.00.00 |Activity |Header; | | | | |
|Header | |This section allows for the reporting of monitoring | | | | |
| | |activities conducted at a Monitoring Location | | | | |
|04.00.01 |ActivityIdentifier |Designator that uniquely identifies an activity within |ESAR |Field Activity Identifier |A designator used to uniquely |Business Decision: WQX |
| | |an organization. | | |identify a field activity |needed more generic term|
| | | | | |within a context. |to incorporate non-field|
| | | | | | |related activities. |
|04.00.02 |ActivityTypeCode |The text describing the type of activity. |ESAR |Field Activity Type |The text describing the type |Business Decision: WQX |
| | | | | |of field activity being |needed more generic term|
| | | | | |performed |to incorporate non-field|
| | | | | | |related activities. |
|04.00.03 |ActivityMediaName |Name or code indicating the environmental medium where |ESAR |Sample Media Name |Name or code indicating the |Business Decision: The |
| | |the sample was taken. | | |environmental medium where the|team needed to use this |
| | | | | |sample was taken. |field for potentially |
| | | | | | |more than sample |
| | | | | | |collection, so broader |
| | | | | | |term was used. |
|04.00.04 |ActivityMediaSubDivisionName |Name or code indicating the environmental matrix as a |ESAR |Sample Media Subdivision Name |Name or code indicating the |Business Decision: The |
| | |subdivision of the sample media. | | |environmental matrix as a |team needed to use this |
| | | | | |subdivision of the sample |field for potentially |
| | | | | |media. |more than sample |
| | | | | | |collection, so broader |
| | | | | | |term was used. |
|04.00.05 |ActivityStartDate |The calendar date on which the field activity was |ESAR |Field Activity Start Date |The starting date that a field|Business Decision: The |
| | |started. | | |activity was started. |team needed to use this |
| | | | | | |field for more than just|
| | | | | | |field activities, so |
| | | | | | |broader term was used. |
|04.00.06 |ActivityStartTime |The measure of clock time when the field activity |ESAR |Field Activity Start Time |The starting time that a field|Business Decision: The |
| | |began. | | |activity was started. |team needed to use this |
| | | | | | |field for more than just|
| | | | | | |field activities, so |
| | | | | | |broader term was used. |
|04.00.07 |ActivityEndDate |The calendar date when the field activity was |ESAR |Field Activity End Date |The ending date that a field |Business Decision: The |
| | |completed. | | |activity was finished. |team needed to use this |
| | | | | | |field for more than just|
| | | | | | |field activities, so |
| | | | | | |broader term was used. |
|04.00.08 |ActivityEndTime |The measure of clock time when the field activity |ESAR |Field Activity End Time |The ending time that a field |Business Decision: The |
| | |ended. | | |activity was finished. |team needed to use this |
| | | | | | |field for more than just|
| | | | | | |field activities, so |
| | | | | | |broader term was used. |
|04.00.09 |ActivityDepthHeightMeasure |Header; | | | | |
| | |A measurement of the vertical location (measured from a| | | | |
| | |reference point) at which an activity occurred. | | | | |
|04.00.09.01 |MeasureValue |The recorded dimension, capacity, quality, or amount of|ESAR |SampleEventDepthHeightMeasure/Me|The recorded dimension, |Business Decision: Team |
| | |something ascertained by measuring or observing. | |asureValue |capacity, quality, or amount |used term Activity over |
| | | | | |of something ascertained by |SampleEvent to make |
| | | | | |measuring or observing. |usage more generic. |
|04.00.09.02 |MeasureUnitCode |The code that represents the unit for measuring the |ESAR |SampleEventDepthHeightMeasure/Me|The code that represents the |Business Decision: Team |
| | |item. | |asureUnitCode |unit for measuring the item. |used term Activity over |
| | | | | | |SampleEvent to make |
| | | | | | |usage more generic. |
|04.00.10 |ActivityTopDepthHeightMeasure |Header; | | | | |
| | |A measurement of the upper vertical location of a | | | | |
| | |vertical location range (measured from a reference | | | | |
| | |point) at which an activity occurred. | | | | |
|04.00.10.01 |MeasureValue |The recorded dimension, capacity, quality, or amount of|ESAR |SampleEventTopDepthHeightMeasure|The recorded dimension, |Business Decision: Team |
| | |something ascertained by measuring or observing. | |/MeasureValue |capacity, quality, or amount |used term Activity over |
| | | | | |of something ascertained by |SampleEvent to make |
| | | | | |measuring or observing. |usage more generic. |
|04.00.10.02 |MeasureUnitCode |The code that represents the unit for measuring the |ESAR |SampleEventTopDepthHeightMeasure|The code that represents the |Business Decision: Team |
| | |item. | |/MeasureUnitCode |unit for measuring the item. |used term Activity over |
| | | | | | |SampleEvent to make |
| | | | | | |usage more generic. |
|04.00.11 |ActivityBottomDepthHeightMeasure |Header; | | | | |
| | |A measurement of the lower vertical location of a | | | | |
| | |vertical location range (measured from a reference | | | | |
| | |point) at which an activity occurred. | | | | |
|04.00.11.01 |MeasureValue |The recorded dimension, capacity, quality, or amount of|ESAR |SampleEventBottomDepthHeightMeas|The recorded dimension, |Business Decision: Team |
| | |something ascertained by measuring or observing. | |ure/MeasureValue |capacity, quality, or amount |used term Activity over |
| | | | | |of something ascertained by |SampleEvent to make |
| | | | | |measuring or observing. |usage more generic. |
|04.00.11.02 |MeasureUnitCode |The code that represents the unit for measuring the |ESAR |SampleEventTopDepthHeightMeasure|The code that represents the |Business Decision: Team |
| | |item. | |/MeasureUnitCode |unit for measuring the item. |used term Activity over |
| | | | | | |SampleEvent to make |
| | | | | | |usage more generic. |
|04.00.12 |ActivityDepthAltitudeReferencePointTe|The reference used to indicate the datum or reference |ESAR |SampleEventDepthAltitudeReferenc|The reference used to indicate|Business Decision: Team |
| |xt |used to establish the depth/altitude of collection. | |ePointText |the datum or reference used to|used term Activity over |
| | | | | |establish the depth/altitude |SampleEvent to make |
| | | | | |of collection. |usage more generic. |
|04.00.13 |ActivityAssignmentProjectIdentifier |A designator used to uniquely identify within an | | | |Business Decision: This |
| | |Organization the project with which an activity is | | | |is a linkage element; No|
| | |associated. | | | |corresponding element |
| | | | | | |found in EDSC standards |
| | | | | | |at this level of |
| | | | | | |hierarchy. |
|04.00.14 |ActivityConductingOrganizationText |A name of the Organization conducting an activity. | | | |Business Decision: This |
| | | | | | |is a linkage element; No|
| | | | | | |corresponding element |
| | | | | | |found in EDSC standards |
| | | | | | |at this level of |
| | | | | | |hierarchy. |
|04.00.15 |MonitoringLocationIdentifier |A designator used to describe the unique name, number, | | | |Business Decision: This |
| | |or code assigned to identify the monitoring location. | | | |is a linkage element; No|
| | | | | | |corresponding element |
| | | | | | |found in EDSC standards |
| | | | | | |at this level of |
| | | | | | |hierarchy. |
|04.00.16 |ActivityCommentText |General comments concerning the activity. | | | |Business Decision: The |
| | | | | | |team chose |
| | | | | | |ActivityComments since |
| | | | | | |the term is more generic|
| | | | | | |and also to be |
| | | | | | |consistent with the use |
| | | | | | |of the term “Comments’ |
| | | | | | |in other areas of the |
| | | | | | |schema. |
|04.01.00 |ActivityLocation |Header; | | | | |
|Header | |This section allows for the geospatial description of | | | | |
| | |actual monitoring site, if it is different from that | | | | |
| | |described for in the formal station description. | | | | |
|04.01.01 |LatitudeMeasure |The measure of the angular distance on a meridian north|Lat/Long |LatitudeMeasure |The measure of the angular |Compliant (ESAR has no |
| | |or south of the equator. | | |distance on a meridian north |geospatial elements |
| | | | | |or south of the equator. |tracked at activity |
| | | | | | |level. Element mapping |
| | | | | | |from Lat/Long standard |
| | | | | | |used.) |
|04.01.02 |LongitudeMeasure |The measure of the angular distance on a meridian east |Lat/Long |LongitudeMeasure |The measure of the angular |Compliant (ESAR has no |
| | |or west of the prime meridian. | | |distance on a meridian east or|geospatial elements |
| | | | | |west of the prime meridian. |tracked at activity |
| | | | | | |level. Element mapping |
| | | | | | |from Lat/Long standard |
| | | | | | |used.) |
|04.01.03 |SourceMapScaleNumeric |The number that represents the proportional distance on|Lat/Long |SourceMapScaleNumeric |The number that represents the|Compliant (ESAR has no |
| | |the ground for one unit of measure on the map or photo.| | |proportional distance on the |geospatial elements |
| | | | | |ground for one unit of measure|tracked at activity |
| | | | | |on the map or photo. |level. Element mapping |
| | | | | | |from Lat/Long standard |
| | | | | | |used.) |
|04.01.04 |HorizontalCollectionMethodName |The name that identifies the method used to determine |Lat/Long |HorizontalCollectionMethodName |The name that identifies the |Compliant (ESAR has no |
| | |the latitude and longitude coordinates for a point on | | |method used to determine the |geospatial elements |
| | |the earth. | | |latitude and longitude |tracked at activity |
| | | | | |coordinates for a point on the|level. Element mapping |
| | | | | |earth. |from Lat/Long standard |
| | | | | | |used.) |
|04.01.05 |HorizontalCoordinateReferenceSystemDa|The name that describes the reference datum used in |Lat/Long |HorizontalCoordinateReferenceSys|The code that represents the |Compliant (ESAR has no |
| |tumName |determining latitude and longitude coordinates. | |temDatumName or Code |reference datum used in |geospatial elements |
| | | | | |determining latitude and |tracked at activity |
| | | | | |longitude coordinates. |level. Element mapping |
| | | | | | |from Lat/Long standard |
| | | | | | |used.) |
|04.02.00 |SAMPLE Description |Header; | | | | |
|Header | |header in schema for Sample only | | | | |
|04.02.01.01 |MethodIdentifier |The identification number or code assigned by the |ESAR / Method |Field Sample Collection Method /|The identification number or |Compliant |
| | |method publisher. | |Method Identifier |code assigned by the method | |
| | | | | |publisher. | |
|04.02.01.02 |MethodIdentifierContext |Identifies the source or data system that created or |ESAR / Method |Field Sample Collection Method /|Identifies the source or data |Compliant |
| | |defined the identifier. | |Method Identifier (metadata) |system that created or defined| |
| | | | | |the identifier. | |
|04.02.01.03 |MethodName |The title that appears on the method from the method |ESAR / Method |Field Sample Collection Method /|Identifying information about |Compliant |
| | |publisher. | |Method Name |the method(s) followed to | |
| | | | | |prepare a sample for analysis.| |
|04.02.01.04 |MethodQualifierTypeName |Identifier of type of method that identifies it as |ESAR / Method |Field Sample Collection Method /|Identifier of type of method |Compliant |
| | |reference, equivalent, or other. | |MethodQualifierType |that identifies it as | |
| | | | | |reference, equivalent, or | |
| | | | | |other. | |
|04.02.01.05 |MethodDescriptionText |A brief summary that provides general information about|ESAR / Method |Sample Preparation Method / |A brief summary that provides |Compliant |
| | |the method. | |MethodDescriptionText |general information about the | |
| | | | | |method. | |
|04.02.02 |SampleTissueTaxonomicName |The name of the organism from which a tissue sample was| | | |Business Decision: No |
| | |taken. | | | |corresponding element |
| | | | | | |found in EDSC standards.|
|04.02.03 |SampleTissueAnatomyName |The name of the anatomy from which a tissue sample was | | | |Business Decision: No |
| | |taken. | | | |corresponding element |
| | | | | | |found in EDSC standards.|
|04.02.04 |SampleCollectionEquipmentName |The name that represents equipment used in collecting |ESAR |FieldActivityEquipment / |A designator used to uniquely |Business Decision |
| | |the sample. | |EquipmentName |identify the instrument or | |
| | | | | |equipment used for the | |
| | | | | |activity. | |
|04.03.00 |SamplePreparation |Header | | | | |
|Header | |This section describes a sample preparation procedure | | | | |
| | |which may be conducted on an initial Sample or on | | | | |
| | |subsequent subsamples. | | | | |
|04.03.01 |SamplePreparationMethod |Header |ESAR |Sample Preparation Method |Identifying information about |Compliant |
| | |Identifying information about the method(s) followed to| | |the method(s) followed to | |
| | |prepare a sample for analysis. | | |prepare a sample for analysis.| |
|04.03.01.01 |MethodIdentifier |The identification number or code assigned by the |ESAR - Method |SamplePreparationMethod / |The identification number or |Compliant |
| | |method publisher. | |MethodIdentifier |code assigned by the method | |
| | | | | |publisher. | |
|04.03.01.02 |MethodIdentifierContext |Identifies the source or data system that created or |ESAR - Method |SamplePreparationMethod / |Identifies the source or data |Compliant |
| | |defined the identifier. | |MethodIdentifier Context (meta |system that created or defined| |
| | | | |data) |the identifier. | |
|04.03.01.03 |MethodName |The title that appears on the method from the method |ESAR - Method |SamplePreparationMethod / |The title that appears on the |Compliant |
| | |publisher. | |MethodName |method from the method | |
| | | | | |publisher. | |
|04.03.01.04 |MethodQualifierTypeName |Identifier of type of method that identifies it as |ESAR - Method |SamplePreparationMethod / |Identifier of type of method |Compliant |
| | |reference, equivalent, or other. | |MethodQualifierType |that identifies it as | |
| | | | | |reference, equivalent, or | |
| | | | | |other. | |
|04.03.01.05 |MethodDescriptionText |A brief summary that provides general information about|ESAR - Method |SamplePreparationMethod / |A brief summary that provides |Compliant |
| | |the method. | |MethodDescriptionText |general information about the | |
| | | | | |method. | |
|04.03.02 |SampleContainerTypeName |The text describing the sample container type. |ESAR |SampleContainerTypeName |The text describing the sample|Compliant |
| | | | | |container type. | |
|04.03.03 |SampleContainerColorName |The text describing the sample container color. |ESAR |SampleContainerColorName |The text describing the sample|Compliant |
| | | | | |container color. | |
|04.03.04 |ChemicalPreservativeUsedName |Information describing the chemical means to preserve |ESAR - Sample |ChemicalPreservativeUsedName |Information describing the |Compliant |
| | |the sample. |Treatment | |chemical means to preserve the| |
| | | | | |sample. | |
|04.03.05 |ThermalPreservativeUsedName |Information describing the temperature means used to |ESAR - Sample |ThermalPreservativeUsedName |Information describing the |Compliant |
| | |preserve the sample. |Treatment | |temperature means used to | |
| | | | | |preserve the sample. | |
|04.03.06 |SampleTransportStorageDescription |The text describing sample handling and transport | | | |Business Decision: No |
| | |procedures used. | | | |corresponding element |
| | | | | | |found in EDSC standards.|
|04.04.00 |ActivityAttachedBinaryObject |Header; | | | | |
|Header | |This section allows for the association of References | | | | |
| | |and electronic attachments to the Activity description | | | | |
| | |including any other documents, images, maps, photos, | | | | |
| | |laboratory materials, geospatial coverages, and other | | | | |
| | |objects associated with the Project.. | | | | |
|04.04.01 |BinaryObjectFileName |The text describing the descriptive name used to |ESAR - Binary | BinaryObjectFileName |The text describing the |Compliant |
| | |represent the file, including file extension. | | |descriptive name used to | |
| | | | | |represent the file, including | |
| | | | | |file extension. | |
|04.04.02 |BinaryObjectFileTypeCode |The text or acronym describing the binary content type |ESAR - Binary | BinaryObjectFileType |The text or acronym describing|Compliant |
| | |of a file. | | |the binary content type of a | |
| | | | | |file. | |
|05.00.00 |Result |Header; | | | | |
|Header | |This section describes the results of a field | | | | |
| | |measurement, observation, or laboratory analysis. | | | | |
|05.00.01 |DataLoggerLineName |The unique line identifier from a data logger result | | | |Business Decision: No |
| | |text file, normally a date/time format but could be any| | | |corresponding element |
| | |user defined name, e.g. "surface", "midwinter", and or | | | |found in EDSC standards.|
| | |"bottom".) | | | | |
|05.00.02 |ResultDetectionConditionText |The textual descriptor of a result. | | | |Business Decision: No |
| | | | | | |corresponding element |
| | | | | | |found in EDSC standards.|
|05.00.03 |CharacteristicName |The object, property, or substance which is evaluated |ESAR |Substance Identifier |A designator used to uniquely |Business Decision: The |
| | |or enumerated by either a direct field measurement, a | | |identify a substance. |team gave this much |
| | |direct field observation, or by laboratory analysis of | | | |consideration and felt |
| | |material collected in the field. | | | |that CharacteristicName |
| | | | | | |was a more appropriate |
| | | | | | |term since non-substance|
| | | | | | |related field assessment|
| | | | | | |characteristics could be|
| | | | | | |included. |
|05.00.04 |ResultSampleFractionText |The text name of the portion of the sample associated |ESAR |Result Basis Name |The basis upon which the |Business Decision: |
| | |with results obtained from a physically-partitioned | | |results were Calculated, |Instead of breaking |
| | |sample. | | |within the Result Basis |these out individually, |
| | | | | |Category. |ESAR uses the generic |
| | | | | | |Result Basis Category |
| | | | | | |and Result Basis Name, |
| | | | | | |which could be repeated.|
| | | | | | |The team felt that |
| | | | | | |separating out to |
| | | | | | |specific Weight, Time, |
| | | | | | |Temperature, etc |
| | | | | | |elements would be more |
| | | | | | |easily understood by the|
| | | | | | |reporting community. |
|05.00.05 |ResultMeasure |Header; | | | | |
| | |The reportable measure of the result for chemical, | | | | |
| | |microbiological, or other characteristics being | | | | |
| | |analyzed. | | | | |
|05.00.05.01 |MeasureValue |The reportable measure of the result for the chemical, |ESAR / Measure|Result Value Measure / Measure |The recorded dimension, |Compliant |
| | |microbiological or other characteristic being analyzed.| |Value |capacity, quality, or amount | |
| | | | | |of something ascertained by | |
| | | | | |measuring or observing. | |
|05.00.05.02 |MeasureUnitCode |The code that represents the unit for measuring the |ESAR / Measure|Result Value Measure / Measure |The code that represents the |Compliant |
| | |chemical substance, microbiological substance or other | |Unit Code |unit for measuring the item. | |
| | |characteristic. | | | | |
|05.00.05.03 |MeasureQualifierCode |A code used to identify any qualifying issues that |ESAR / Measure|Result Value Measure / Measure |A code used to identify any |Compliant |
| | |affect the results. | |Qualifier Code |qualifying issues that affect | |
| | | | | |the results. | |
|05.00.06 |ResultStatusIdentifier |Indicates acceptability of the result with respect to |ESAR |Result Status Identifier |Indicates the acceptability of|Compliant |
| | |QA/QC criteria. | | |the result with respect to | |
| | | | | |QA/QC criteria. | |
|05.00.07 |StatisticalBaseCode |The code for the method used to calculate derived |ESAR |StatisticalBaseCode |Identifier or code for the |Compliant |
| | |results. | | |method used to calculate | |
| | | | | |derived results. | |
|05.00.08 |ResultValueTypeName |A name that qualifies the process which was used in the| | | |Business Decision: No |
| | |determination of the result value (e.g., actual, | | | |corresponding element |
| | |estimated, calculated). | | | |found in EDSC standards.|
|05.00.09 |ResultWeightBasisText |The name that represents the form of the sample or |ESAR |Result Basis Category |ESAR uses these two fields to |Business Decision: |
| | |portion of the sample which is associated with the | |and |capture multiple basis types. |Instead of breaking |
| | |result value (e.g., wet weight, dry weight, ash-free | |Result Basis Name | |these out individually, |
| | |dry weight). | | | |ESAR uses the generic |
| | | | | | |Result Basis Category |
| | | | | | |and Result Basis Name, |
| | | | | | |which could be repeated.|
| | | | | | |The team felt that |
| | | | | | |separating out to |
| | | | | | |specific Weight, Time, |
| | | | | | |Temperature, etc |
| | | | | | |elements would be more |
| | | | | | |easily understood by the|
| | | | | | |reporting community. |
|05.00.10 |ResultTimeBasisText |The period of time (in days) over which a measurement |ESAR |Result Basis Category |ESAR uses these two fields to |Business Decision: |
| | |was made. For example, BOD can be measured as 5 day or | |and |capture multiple basis types. |Instead of breaking |
| | |20 day BOD. | |Result Basis Name | |these out individually, |
| | | | | | |ESAR uses the generic |
| | | | | | |Result Basis Category |
| | | | | | |and Result Basis Name, |
| | | | | | |which could be repeated.|
| | | | | | |The team felt that |
| | | | | | |separating out to |
| | | | | | |specific Weight, Time, |
| | | | | | |Temperature, etc |
| | | | | | |elements would be more |
| | | | | | |easily understood by the|
| | | | | | |reporting community. |
|05.00.11 |ResultTemperatureBasisText |The name that represents the controlled temperature at |ESAR |Result Basis Category |ESAR uses these two fields to |Business Decision: |
| | |which the sample was maintained during analysis, e.g. | |and |capture multiple basis types. |Instead of breaking |
| | |25 deg BOD analysis. | |Result Basis Name | |these out individually, |
| | | | | | |ESAR uses the generic |
| | | | | | |Result Basis Category |
| | | | | | |and Result Basis Name, |
| | | | | | |which could be repeated.|
| | | | | | |The team felt that |
| | | | | | |separating out to |
| | | | | | |specific Weight, |
| | | | | | |Time,Temperature, etc |
| | | | | | |elements would be more |
| | | | | | |easily understood by the|
| | | | | | |reporting community. |
|05.00.12 |ResultParticleSizeBasisText |User defined free text describing the particle size |ESAR |Result Basis Category |ESAR uses these two fields to |Business Decision: |
| | |class for which the associated result is defined. | |and |capture multiple basis types. |Instead of breaking |
| | | | |Result Basis Name | |these out individually, |
| | | | | | |ESAR uses the generic |
| | | | | | |Result Basis Category |
| | | | | | |and Result Basis Name, |
| | | | | | |which could be repeated.|
| | | | | | |The team felt that |
| | | | | | |separating out to |
| | | | | | |specific Weight, Time, |
| | | | | | |Temperature, etc |
| | | | | | |elements would be more |
| | | | | | |easily understood by the|
| | | | | | |reporting community. |
|05.00.13 |DataQuality |Header; | | | | |
|Header | |The quantitative statistics and qualitative descriptors| | | | |
| | |that are used to interpret the degree of acceptability | | | | |
| | |or utility of data to the user. | | | | |
|05.00.13.02 |BiasValue |The systematic or persistent distortion of a |ESAR |BiasValue |The systematic or persistent |Compliant |
| | |measurement process which causes error in one | | |distortion of a measurement | |
| | |direction. | | |process which causes error in | |
| | | | | |one direction. | |
|05.00.13.03 |ConfidenceIntervalValue |A range of values constructed so that this range has a |ESAR |ConfidenceIntervalValue |A range of values constructed |Compliant |
| | |specified probability of including the true population | | |so that this range has a | |
| | |mean. | | |specified probability of | |
| | | | | |including the true population | |
| | | | | |mean. | |
|05.00.13.04 |UpperConfidenceLimitValue |Value of the upper end of the confidence interval. |ESAR |UpperConfidenceLimitValue |Value of the upper end of the |Compliant |
| | | | | |confidence interval. | |
|05.00.13.05 |LowerConfidenceLimitValue |Value of the lower end of the confidence interval. |ESAR |LowerConfidenceLimitValue |Value of the lower end of the |Compliant |
| | | | | |confidence interval. | |
|05.00.14 |ResultCommentText |Free text with general comments concerning the result. |ESAR |Substance Analysis Comments |Comments related to the |Business Decision: No |
| | | | | |analysis of a particular |corresponding element |
| | | | | |substance. |found in EDSC standards |
| | | | | | |(team needed term not |
| | | | | | |explicitely link to |
| | | | | | |'Substance') |
|05.01.00 |ResultAttachedBinaryObject |Header; | | | | |
|Header | |This section allows for the association of References | | | | |
| | |and electronic attachments to a Result description | | | | |
| | |including any other documents, images, maps, photos, | | | | |
| | |laboratory materials, geospatial coverages, and other | | | | |
| | |objects associated with the Project.. | | | | |
|05.01.01 |BinaryObjectFileName |The text describing the descriptive name used to |ESAR - Binary |BinaryObjectFileName |The text describing the |Compliant |
| | |represent the file, including file extension. | | |descriptive name used to | |
| | | | | |represent the file, including | |
| | | | | |file extension. | |
|05.01.02 |BinaryObjectFileTypeCode |The text or acronym describing the binary content type |ESAR - Binary |BinaryObjectFileType |The text or acronym describing|Compliant |
| | |of a file. | | |the binary content type of a | |
| | | | | |file. | |
|05.02.00 |Result Analytical Method |Header: | | | | |
|Header | |Allows for the optional association of an analytical | | | | |
| | |method employed either in the Lab or in the Field with | | | | |
| | |any result. | | | | |
|05.02.02 |MethodIdentifierContext |Identifies the source or data system that created or |ESAR |SampleAnalyticalMethod / |Identifies the source or data |Compliant |
| | |defined the identifier. | |MethodIdentifier Context (meta |system that created or defined| |
| | | | |data) |the identifier. | |
|05.02.03 |MethodName |The title that appears on the method from the method |ESAR |SampleAnalyticalMethod / |The title that appears on the |Compliant |
| | |publisher. | |MethodName |method from the method | |
| | | | | |publisher. | |
|05.02.04 |MethodQualifierTypeName |Identifier of type of method that identifies it as |ESAR |SampleAnalyticalMethod / |Identifier of type of method |Compliant |
| | |reference, equivalent, or other. | |MethodQualifierType |that identifies it as | |
| | | | | |reference, equivalent, or | |
| | | | | |other. | |
|05.02.05 |MethodDescriptionText |A brief summary that provides general information about|ESAR |SampleAnalyticalMethod / |A brief summary that provides |Compliant |
| | |the method. | |MethodDescriptionText |general information about the | |
| | | | | |method. | |
|05.03.00 |ResultLabInformation |Header; | | | | |
|Header | |Information that describes information obtained by a | | | | |
| | |laboratory related to a specific laboratory analysis. | | | | |
|05.03.01 |LaboratoryName |The name of the Lab responsible for the result |ESAR /Contact |LaboratoryOrganizationContact / |The principal organization to |Business Decision: WQX |
| | | | |OrganizationFormalName |contact with questions about |team decided not to |
| | | | | |this laboratory analysis data.|reference ESAR |
| | | | | | |Laboratory Contact (15 |
| | | | | | |fields), since team |
| | | | | | |needed only 1 field, or |
| | | | | | |having an element name |
| | | | | | |called |
| | | | | | |OrganizationFormalName, |
| | | | | | |which isn't as clear as |
| | | | | | |term used. |
|05.03.02 |AnalysisStartDate |The calendar date on which the analysis began. |ESAR |Analysis Start Date |The calendar date on which the|Compliant |
| | | | | |analysis began. | |
|05.03.03 |AnalysisStartTime |The local time and relative time zone using UTC when |ESAR |Analysis Start Time |The local time when the |Compliant |
| | |the analysis began. | | |analysis began. | |
|05.03.04 |AnalysisEndDate |The calendar date on which the analysis was finished. |ESAR |Analysis End Date |The calendar date on which the|Compliant |
| | | | | |analysis was finished. | |
|05.03.05 |AnalysisEndTime |The local time and relative time zone using UTC when |ESAR |Analysis End TIme |The local time when the |Compliant |
| | |the analysis was finished. | | |analysis was finished. | |
|05.03.06 |ResultLaboratoryCommentCode |Remarks which further describe the laboratory | | | |No corresponding element|
| | |procedures which produced the result. | | | |found in EDSC data |
| | | | | | |standards that |
| | | | | | |specifically relates to |
| | | | | | |the laboratory comment |
| | | | | | |code applied to the |
| | | | | | |results. |
|05.04.00 |ResultQuantitationLimit |Header; | | | | |
|Header | |Information that describes one of a variety of | | | | |
| | |detection or quantitation limits determined in a | | | | |
| | |laboratory. | | | | |
|05.04.01 |DetectionQuantitationLimitTypeName |Text describing the type of detection or quantitation |ESAR |Detection Limit Type |One of a list of client, |Business Decision: ESAR |
| | |limit used in the analysis of a characteristic. | |or |regulation, or organization |uses Detection Limit and|
| | | | |Reporting Limit Type |defined acronyms or statistic |Reporting Limit as |
| | | | | |methodologies that specify the|separate fields. The |
| | | | | |type of detection limit used |team decided to combine |
| | | | | |for analysis. |these into 1 field that |
| | | | | |Or |could be reported |
| | | | | |One of a list of client, |multiple times for each |
| | | | | |regulation, or organization |result to simplify the |
| | | | | |defined acronyms or |reporting process. A |
| | | | | |statistical methodologies that|type field is then used |
| | | | | |specify the type of reporting |to distinguish the type |
| | | | | |limit. |of detection or |
| | | | | | |reporting condition |
| | | | | | |reported. |
|05.04.02 |DetectionQuantitationLimitMeasure |Constituent concentration that, when processed through | | | | |
| | |the complete method, produces a signal that is | | | | |
| | |statistically different from a blank. | | | | |
|05.04.02.01 |MeasureValue |The reportable measure of the result for the chemical, |ESAR |Detection Limit / Measure Value |Constituent concentration that|Business Decision: ESAR |
| | |microbiological or other characteristic being analyzed.| |or |produces a signal sufficiently|uses Detection Limit and|
| | | | |Reporting Limit / Measure Value |greater than the blank and can|Reporting Limit as |
| | | | | |be detected within specified |separate fields. The |
| | | | | |levels by good laboratories |team decided to combine |
| | | | | |during routine operating |these into 1 field that |
| | | | | |conditions. |could be reported |
| | | | | |OR |multiple times for each |
| | | | | |Constituent concentration |result to simplify the |
| | | | | |that, when processed through |reporting process. A |
| | | | | |the complete method, produces |type field is then used |
| | | | | |a signal that is statistically|to distinguish the type |
| | | | | |different from a blank. |of detection or |
| | | | | | |reporting condition |
| | | | | | |reported. |
|05.04.02.02 |MeasureUnitCode |The code that represents the unit for measuring the |ESAR |Detection Limit / Measure Unit |The code that represents the |Business Decision: ESAR |
| | |chemical substance, microbiological substance or other | |Code |unit for measuring the item. |uses Detection Limit and|
| | |characteristic. | |or | |Reporting Limit as |
| | | | |Reporting Limit / Measure Unit | |separate fields. The |
| | | | |Code | |team decided to combine |
| | | | | | |these into 1 field that |
| | | | | | |could be reported |
| | | | | | |multiple times for each |
| | | | | | |result to simplify the |
| | | | | | |reporting process. A |
| | | | | | |type field is then used |
| | | | | | |to distinguish the type |
| | | | | | |of detection or |
| | | | | | |reporting condition |
| | | | | | |reported. |
|05.05.00 |LabSamplePreparation |Header; | | | | |
|Header | |Describes Lab Sample Preparation procedures which may | | | | |
| | |alter the original state of the Sample and produce Lab | | | | |
| | |subsamples. These Lab Subsamples are analyzed and | | | | |
| | |reported by the Lab as Sample results. | | | | |
|05.05.01 |LabSamplePreparationMethod |Header; | | | | |
|Header | |Identifying information about the method followed to | | | | |
| | |prepare a sample for analysis | | | | |
|05.05.01.01 |MethodIdentifier |The identification number or code assigned by the |ESAR - Results|Sample Preparation Method / |The identification number or |Compliant |
| | |method publisher. |/ Method |Method Identifier |code assigned by the method | |
| | | | | |publisher. | |
|05.05.01.02 |MethodIdentifierContext |Identifies the source or data system that created or |ESAR - Results|Sample Preparation Method / |Identifies the source or data |Compliant |
| | |defined the identifier. |/ Method |Method Identifier (metadata) |system that created or defined| |
| | | | | |the identifier. | |
|05.05.01.03 |MethodName |The title that appears on the method from the method |ESAR - Results|Sample Preparation Method / |Identifying information about |Compliant |
| | |publisher. |/ Method |Method Name |the method(s) followed to | |
| | | | | |prepare a sample for analysis.| |
|05.05.01.04 |MethodQualifierTypeName |Identifier of type of method that identifies it as |ESAR - Results|Sample Preparation Method / |Identifier of type of method |Compliant |
| | |reference, equivalent, or other. |/ Method |MethodQualifierType |that identifies it as | |
| | | | | |reference, equivalent, or | |
| | | | | |other. | |
|05.05.01.05 |MethodDescriptionText |A brief summary that provides general information about|ESAR - Results|Sample Preparation Method / |A brief summary that provides |Compliant |
| | |the method. |/ Method |MethodDescriptionText |general information about the | |
| | | | | |method. | |
|05.05.02 |PreparationStartDate |The calendar date when on which the |ESAR |PreparationStartDate |The calendar date when on |Compliant |
| | |preparation/extraction of the sample for analysis | | |which the | |
| | |began. | | |preparation/extraction of the | |
| | | | | |sample for analysis began. | |
|05.05.03 |PreparationStartTime |The local time when the preparation/extraction of the |ESAR |PreparationStartTime |The local time when the |Compliant |
| | |sample for analysis began. | | |preparation/ extraction of the| |
| | | | | |sample for analysis began. | |
|05.05.04 |PreparationEndDate |The calendar date when on which the |ESAR |PreparationEndDate |The calendar date when on |Compliant |
| | |preparation/extraction of the sample for analysis was | | |which the | |
| | |finished. | | |preparation/extraction of the | |
| | | | | |sample for analysis was | |
| | | | | |finished. | |
|05.05.05 |PreparationEndTime |The local time when the preparation/extraction of the |ESAR |PreparationEndTime |The local time when the |Compliant |
| | |sample for analysis was finished. | | |preparation/ extraction of the| |
| | | | | |sample for analysis was | |
| | | | | |finished. | |
|06.00.00 |ACTIVITY Group |Header; | | | | |
|Header | |Allows for the grouping of activities | | | | |
|06.00.02 |ActivityGroupName |A name of an activity group. | | | |No corresponding element|
| | | | | | |found in EDSC data |
| | | | | | |standards. |
|06.00.03 |ActivityGroupTypeCode |Identifies the type of grouping of a set of activities | | | |No corresponding element|
| | | | | | |found in EDSC data |
| | | | | | |standards. |
|06.00.04 |ActivityIdentifier |Designator that uniquely identifies an activity within | | | |No corresponding element|
| | |an organization. | | | |found in EDSC data |
| | | | | | |standards. |
-----------------------
[1] The methodology used in this report for SSC conformance has been adopted from the methodology used in the TRI Conformance Report.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- epa office of water water quality exchange owwqx xml
- abc water quality report 1999
- ccr report priest river idaho
- first annual report to epa
- annual water quality report template larger systems
- annual water quality report template small systems
- ccr report eastern shoshone tribe
- consumer confidence report certification form us epa
- ccr report welcome city of priest river
Related searches
- water quality activities for kids
- water quality education for kids
- water quality education material
- water quality issues
- water quality issues in us
- water quality activity
- water quality games for kids
- drinking water quality issues
- tap water quality by state
- epa water quality reports
- history of water quality index
- epa local water quality report