Diffusion In Agar Cubes
Name:_______________________________________________Date:____ _____Block:______Diffusion In Agar CubesIs Bigger Better? OR Is Smaller Smarter?Adapted from Flinn Scientific Publication No. 10110Introduction: Diffusion is one of the very important processes by which substances such as nutrients, water, oxygen, and cellular wasted are transported between living cells and their environment. This activity will help you explore the relationship between diffusion and cell size by experimenting with model “cells.”In this experiment, you will use agar cubes to which the indicator phenolphthalein has been added. Phenolphthalein is an acid/base indicator that turns pink in the presence of a base such as NaOH. Thus the surface of the agar cubes will turn pink immediately when put into a NaOH solution. The NaOH will continue to diffuse through the cube and gradually turn the inside of the cube pink. The guiding question for this lab is thus:What determines the efficiency of diffusion throughout the model “cells”? Use this question to help formulate a hypothesis:Your hypothesis: Materials: Agar A ruler0.1M NaOH per group 200mLKnifeLarge beakerSpoon/Tongs Procedure: Each group will cut three agar cubes: A 3cm cube, a 2cm cube, and a 1cm cube. CUT AS ACCURATELY AS POSSIBLE. (This may be already completed for you.)Pour 200mL of 0.1M sodium hydroxide solution into your 400mL beaker.Immerse your 3 cubes in the sodium hydroxide solution, noting the time.Let the cubes soak for approximately 10 minutes.Periodically, gently stir the solution, or turn the cubes over.After 10 minutes, use a spoon or tongs to remove the cubes from the sodium hydroxide solution.Blot the with a paper towel.Promptly cut each cube in half and measure the depth to which the pink color has penetrated. Sketch each block’s cross-section. (colored pencils are available upon request)Record your measurements and sketch each cube in the table found on the next page.Do the following calculations for each cube and complete the following data table:Calculating % diffusion in each cube:Calculate total volume of each cube (volume = L x W x H)Calculate volume that did not turn pink. (That is, calculate total volume of the small portion of the cube that did not turn pink – use the same formula L x W x H)Calculate volume diffused = total volume – volume not pink.Calculate % diffusion = Volume diffused /total volume x 100Calculate the surface area of each cube and the surface area to volume ratio:Calculate the surface area of a cube = L x W x # of sidesCalculate surface area/volume ratio.Conclusion Questions: On a separate piece of paper answer the following questions. Be sure to submit data table with your conclusion questionsIn terms of maximizing diffusion, what was the most effective size cube that you tested?Why was that size most effective at maximizing diffusion? What are the important factors that affect how materials diffuse into cells or tissues?If a large surface area is helpful to cells, why do cells not grow to be very large?You have three cubes, A, B, and C. They have surface to volume ratios of 3:1, 5:2, and 4:1 respectively. Which of these cubes is going to be the most effective at maximizing diffusion, how do you know this?How does your body adapt surface area-to-volume ratios to help exchange gases?Why can’t certain cells, like bacteria, get to be the size of a small fish?What are the advantages of large organisms being multicellular?DATA TABLE: Diffusion In Agar Cubes Name:___________Cube SizeTotal cube volume (cm3)Total volume that was not pink(cm3)Sketch of each CubeVolume of the diffused cube(total volume – volume that was not pink)PercentDiffusionSurface area of cube (cm2)Surface area to volume ratio1cm2cm3cmDATA TABLE: Diffusion In Agar Cubes Name:___________Cube SizeTotal cube volume (cm3)Total volume that was not pink(cm3)Sketch of each CubeVolume of the diffused cube(total volume – volume that was not pink)PercentDiffusionSurface area of cube (cm2)Surface area to volume ratio1cm2cm3cmPreparation of agarMix 20g of agar with one liter of distilled or deionized water. Recipe based on 15 groups of students working in pairs.Heat almost to a boil. Stir frequently until solution is clearRemove from heat. AS the agar mixture cools add 10 mL of 1% phenolphthalein solution (1g phenolphthalein in 100 mL 95% ethyl alcohol) and stir. If mixture is pink, add a few drops of dilute hydrochloric acid until the pink color disappears.Pour agar into a shallow tray to a depth of 3cm and allow it to set (over night). A tray measuring 12cm x 2cm that is at least 3cm deep will accommodate one liter of agar mixture. ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- rda research data sharing without barriers
- abstract surrey research insight open access
- dealing with data consultancy report ukoln
- gummy bear graphing the science queen
- 03 04 self study questionnaire
- rogue community college
- types of chemical reactions lab
- diffusion in agar cubes
- physical and chemical properties lab
- five types of chemical reaction worksheet answers
Related searches
- amoeba sisters diffusion answer key
- cubes in feet to cubic meters
- escience lab diffusion answer key
- diffusion osmosis and tonicity lab
- difference of two cubes pattern
- difference of perfect cubes formula
- difference of cubes calculator
- factoring perfect cubes calculator
- factoring perfect cubes formula
- squares and cubes worksheet pdf
- prove the difference of cubes identity
- rapid diffusion of popular culture