A Simple Guide to Document Control - QEM
#QHelp
A Simple Guide to Document Control
What is document control and why do we need it?
A lot of people find document control to be exceptionally tedious. We understand! However, the simple fact is that following basic document control principals can help make almost any business more efficient.
So what is it?
Document control is all to do with transferring information between relevant parties. This could be a law firm sending a report to a client, a construction firm receiving technical drawings from a designer, or a bakery giving an employee a recipe to follow.
We need to ensure that the information that reaches the end user is correct, therefore the document must be controlled to ensure that this is the case. Sometimes the information contained in a document needs to be altered; maybe the bakery has altered the recipe to add an extra ingredient, for example. Placing controls on a document means that we ensure that the document always contains the correct information. Table A describes the various controls that can be placed on a document with examples of how they can be used.
So what is it?
Document control is all to do with transferring information
between relevant parties.
Document Control and ISO 9001
Any organisation wanting to achieve compliance to the ISO 9001:2008 standard are required to produce certain documents, including a quality manual, a quality policy, and six specified documented procedures[1]. Of course, most organisations will choose to document much more information than that required by the standard.
Controlling documents is a key requirement of ISO 9001:2008 (Control of Documents' (4.2.3)), and one of the required six documented procedures is the Document Control Procedure (4.2.3). The standard specifies that 7 controls should be defined within the procedure; these are further explained in Table A.
Share this article:
Table A - Document controls and how they can be applied
Note: Controls used are specified under ISO 9001:2008 section 4.2.3
Control
Ques ons to be Answered
Possible Solu ons and Further Informa on
A. To approve documents for adequacy prior to issue
x Who is responsible for approving documents?
x Does this vary depending on the type of document?
x How can you tell whether the document has been approved?
x Once a document has been dra ed, it will o en go through a process of review and approval where it is read, commented on and amendments made where necessary prior to it's release.
x Depending on the type and importance of the document, it could just require approval by one person (e.g. a Project Manager), or by mul ple people (e.g. a H&S Manager, Quality Manager and Environmental Manager).
x O en, companies will have space on the front page of a document for certain authorised people to sign off the document as approved. This can either be done as hard copy or using digital signatures.
B. To review and update as necessary and re-approve documents
x How o en are documents reviewed?
x Whilst not a requirement, most organisa ons should review documents once annually or during periods of significant organisa onal change.
x Who is responsible for reviewing x Reviewing a document does not mean it has to be revised--if it is s ll fit for purpose and no changes need
the documents?
to be made, it can stay at it's current revision.
x Is the re-approval process the same as for ini al approvals?
x To protect from unauthorised edi ng, Word documents can be password protected or locked to only allow certain changes (e.g. comments or tracked changes). It is also common for organisa ons to only
x How are the documents protected from unauthorised edi ng?
share PDF or printed versions of documents with anyone except the document controller and authorised reviewer/approver.
x How will the revision be shown
C. To ensure that changes and
on the document?
the current revision status of
documents are iden fied
x How will the reader know what
has changed between revisions?
x The revision number of a document is usually shown on the tle page, but an extra p would be to include it in the header or footer of every page. This ensures that if the document is printed, it cannot be mixed up with parts of a superseded document.
x A table showing the revision history of a document is very useful. Against each revision number and date, the reviewer can draw a en on to anything that has been added, amended or removed since the previous revision.
x If a document has very specific altera ons made to it when revised, the reviewer may wish to highlight these throughout the document. This could be by pu ng the new or amended text in italics, underlining it, highligh ng it with a colour, or pu ng a symbol in the margin next to the altera on.
D. To ensure that relevant versions of applicable documents are available at points of use
x Where are the master documents x The document controller is usually the one person who holds the master copies of every document.
stored and are distributed copies
Nowadays this is mostly done electronically, and as such it is impera ve that a back up regime is in place
monitored?
to avoid losing any documenta on.
x How are users no fied of document changes?
x If an onsite back up (e.g. onto a hard drive) or hard copies of master documents are kept, it's advised that these are held in a fireproof cabinet so they are kept safe.
x Who is responsible for checking that users have the correct revision (end user / document controller / manager etc.)?
x No fica on of document changes is dependent on the way the organisa on manages it's distribu on of documents. Some document controllers might keep a register showing who has been given controlled copies of certain documents, whilst some might use an online system with email distribu on to a specific mailing list etc. Whichever way the documents are distributed, the document controller should follow the
x Are there hard copies that need to be updated?
same procedure and ensure that any person who was given access to the original document is informed when changes have been made. See sec on G regarding superseded and obsolete documents.
E. To ensure that documents remain legible and readily iden fiable
x Is there a reference code or numbering system that will be applied to iden fy documents?
x What format will documents be kept in?
x A document reference system can be really useful for iden fying documents easily. A document number can be as simple or as detailed as the organisa on requires, but a code that includes reference codes to projects, clients, departments or work sites can be really useful.
x E.g. a document numbered MAN-DES-PRO-001 could mean it belongs to the Manchester Office, Design Department, Procedure no. 001, or J12-LET-034 could mean it's the 34th le er wri en to customer J12.
x It is up to the organisa on to decide what format the documents should take. See sec on B regarding electronic copies and unauthorised edi ng.
F. To ensure that documents of external origin determined by the organisa on to be necessary for the planning and opera on of the quality management system are iden fied and their distribu on controlled
x How do the answers from a-f apply for external documents?
x Some organisa ons use specialist subcontractors who will produce their own procedures to follow. To ensure the distribu on of these external procedures is controlled, the organisa on should control the
x Is there a process for checking
documents in the same way as the documents they produce are controlled.
external documents (e.g. ensuring x An example of an organisa on reviewing external documents could be a client/designer providing the
they comply to legisla on, are
organisa on with technical drawings, but before they are used an engineer must check them to ensure
acceptable within company H&S
suitability and highlight any poten al issues.
guidelines etc.)?
G. To prevent the unintended use of obsolete documents, and to apply suitable iden fica on to them if they are retained for any purpose
x How do you make sure that only the correct documents of the current revision are being used?
x How do you deal with superseded documents?
x Are obsolete documents destroyed/archived?
x Is it known who has which document or is it down to the end user to check the revision?
x This goes back to sec on D and no fica on of document changes.
x What happens to superseded or obsolete documents depends on how they are used within the organisa on. Some document controllers will collect hard copy documents from those who they have been issued to, to ensure that they are all out of circula on and can be destroyed. Some will just remove the documents from a shared folder. Others will put the emphasis on the user to destroy the document or delete it from their own computer.
x It is wise for the document controller to keep a folder (either electronic or hard copy) of superseded documents for future reference, but they should be clearly marked as superseded either by using a stamp or watermark.
Share this ar cle:
What is the difference between documents and records?
ISO 9001:2008 also references Record Control and includes the requirement of a Records Control Procedure (4.2.4)[1]. But what is the difference?
The ISO 9001 Guidance Document[2] defines a document as "information and its supporting medium", whilst a record is a "document stating results achieved or providing evidence of activities performed". Table B to the right shows examples of each.
These definitions clearly highlight that whilst a record is always a document (albeit a special type), a document is not always a record.
Table B: Examples of Documents & Records
Documents:
Instruction manual Management procedures Technical drawings Policy statement Presentation Recipe
Records:
Training certificates Inspection / audit results Feedback questionnaire Meeting minutes Calibration report Order receipt
For this reason, the designated Document Controller (or Document Control Team) will also control the records in most organisations. Whilst records may not need, The standard states that the Records Control Procedure should "define the controls needed for the identification, storage, protection, retrieval, retention and disposition of records" (4.2.4)[1]. Many of the suggestions made in Table A about how to control documents will also be useful in controlling records, particularly sections B, D, E & G.
References
(1) ISO 9001:2008 Quality Management Systems - Requirements (Please refer to to obtain a copy) (2) ISO 9000 Introduction and Support Package: Guidance on the Documentation Requirements of ISO 9001:2008 ( iso/02_guidance_on_the_documentation_requirements_of_iso_9001_2008..pdf)
From the editor: We have tried to make sure the above article is as accurate and up-to-date as possible. If you think we have something wrong, or you feel we need to update it, please get in touch here.
Share this article:
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- document control tracking excel template
- a girlfriends guide to divorce
- creating a document control program
- best document control systems
- document control procedures
- document control software
- classified document control record
- free document control system
- document control software free
- cdrh document control center address
- document control procedure example
- document control plan