Unified POS Support



Command Line Parameters for

Retail Platform Software for Windows

NOTE: All parameters are case sensitive (must be in uppercase).

General Options:

End User’s License Agreement (EULA)

ACCEPT_EULA = YES, NO (Default value is NO)

Terminal Service Type (TERMINALSERVICETYPE)

TERMINALSERVICETYPE = ASSISTED , SELF

Terminal Type/ Hardware (HW)

➢ The following HW for terminal service type SELF:

o HW = 7402, 7404, 7409, 7350

➢ The following HW for terminal service type ASSISTED:

o HW = PC, 7403, 7443, 7446, 7449, 7456, 7457, 7458, 7459,7600,7601,7610,7611, 7649

Terminal Model

MODEL= 1XXX, 2XXX, 20XX-, 21XX+, 3XXX-, 4000+ (Needed on 7443, 7449, 7457 and 7458’s only)

➢ 1XXX: For 7449 only

➢ 2XXX: For 7449 only

➢ 20XX-: For 7443 only

➢ 21XX+: For 7443 only

➢ 3XXX-: For 7457 or 7458

➢ 4000+: For 7457 or 7458

Standard Windows Installer properties supported are listed below. They are case sensitive, and must be specified in upper case.

NO_CANCEL

Valid value is YES. Disables the Cancel button when used in conjunction with the Reduced UI setting (/qr).

REBOOTPROMPT

Valid value is S (for Suppress). This will suppress the prompt for reboot.

REBOOT

Valid value is R (Really Suppress). This is used when you absolutely do not want a reboot to occur during installation. This is most useful for allowing one to do chained installs without having to reboot the system.

NEEDS_REBOOT=YES, NO

To control reboot after install. Default value is YES.

Component Options:

This gives you the option whether to install the certain component or not and if not specified, default value is returned. The default value for each parameter is listed in BOLD unless otherwise noted.

Base Platform

➢ INSTALLBP=YES, NO

Retail Systems Manager LE

➢ INSTALLRSM=YES, NO

Unified POS

➢ INSTALLUPOS=YES, NO

OLE for POS

➢ INSTALLOPOS=YES, NO

Java for POS

➢ INSTALLJAVAPOS=YES, NO

RealVNC 3.3.7

➢ INSTALL_VNC=Y, N

Directory Options:

The path below changes the directory settings where these features are being installed.

Ex. INSTALLDIR = Base path for installation and this changes the directory where feature is installed

INSTALLDIR= Its default value is “C:\Program Files\NCR”

Unified POS Support:

Provides support for OLE for POS (OPOS) and Java for POS (JavaPOS)

The following sets of parameters allow the selection of specific UPOS configurations.

The default value for each parameter is listed in BOLD unless otherwise noted.

UnifiedPOS

INSTALLUPOS=YES, NO

OPOS

INSTALLOPOS=YES, NO

OPOS Control Objects

INSTALLOPOS_COS=YES, NO

NCR OPOS Control Objects

INSTALLOPOS_COS_NCR=YES, NO

INSTALLOPOS_CO_NCR_CASHDRAWER=YES, NO

INSTALLOPOS_CO_NCR_COINDISPENSER=YES, NO

INSTALLOPOS_CO_NCR_HARDTOTALS=YES, NO

INSTALLOPOS_CO_NCR_KEYLOCK=YES, NO

INSTALLOPOS_CO_NCR_LINEDISPLAY=YES, NO

INSTALLOPOS_CO_NCR_MICR=YES, NO

INSTALLOPOS_CO_NCR_MOTIONSENSOR=YES, NO

INSTALLOPOS_CO_NCR_MSR=YES, NO

INSTALLOPOS_CO_NCR_POSKEYBOARD=YES, NO

INSTALLOPOS_CO_NCR_POSPRINTER=YES, NO

INSTALLOPOS_CO_NCR_SCALE=YES, NO

INSTALLOPOS_CO_NCR_SCANNER=YES, NO

INSTALLOPOS_CO_NCR_SIGCAP=YES, NO

INSTALLOPOS_CO_NCR_SIGCAPFORM=YES, NO

INSTALLOPOS_CO_NCR_TONE=YES, NO

Common OPOS Control Objects

INSTALLOPOS_COS_COMMON=YES, NO

INSTALLOPOS_CO_BIOMETRICS=YES, NO

INSTALLOPOS_CO_COMMON_BUMPBAR=YES, NO

INSTALLOPOS_CO_COMMON_CASHCHANGER=YES, NO

INSTALLOPOS_CO_COMMON_CASHDRAWER=YES, NO

INSTALLOPOS_CO_COMMON_CHECKSCANNER=YES, NO

INSTALLOPOS_CO_COMMON_CAT=YES, NO

INSTALLOPOS_CO_COMMON_COINDISPENSER=YES, NO

INSTALLOPOS_CO_COMMON_FISCALPRINTER=YES, NO

INSTALLOPOS_CO_COMMON_HARDTOTALS=YES, NO

INSTALLOPOS_CO_COMMON_KEYLOCK=YES, NO

INSTALLOPOS_CO_COMMON_LINEDISPLAY=YES, NO

INSTALLOPOS_CO_COMMON_MICR=YES, NO

INSTALLOPOS_CO_COMMON_MOTIONSENSOR=YES, NO

INSTALLOPOS_CO_COMMON_MSR=YES, NO

INSTALLOPOS_CO_COMMON_POINTCARDRW=YES, NO

INSTALLOPOS_CO_COMMON_PINPAD=YES, NO

INSTALLOPOS_CO_COMMON_POSPOWER=YES, NO

INSTALLOPOS_CO_COMMON_POSKEYBOARD=YES, NO

INSTALLOPOS_CO_COMMON_REMOTEORDERDISPLAY=YES, NO

INSTALLOPOS_CO_COMMON_POSPRINTER=YES, NO

INSTALLOPOS_CO_COMMON_SCALE=YES, NO

INSTALLOPOS_CO_COMMON_SCANNER=YES, NO

INSTALLOPOS_CO_COMMON_SMARTCARDRW=YES, NO

INSTALLOPOS_CO_COMMON_SIGCAP=YES, NO

INSTALLOPOS_CO_COMMON_TONE=YES, NO

INSTALLOPOS_CO_COMMON_BELT = YES, NO

INSTALLOPOS_CO_COMMON_BILLACCEPTOR = YES, NO

INSTALLOPOS_CO_COMMON_BILLDISPENSER = YES, NO

INSTALLOPOS_CO_COMMON_COINACCEPTOR = YES, NO

INSTALLOPOS_CO_COMMON_ELECVALUERW = YES, NO

INSTALLOPOS_CO_COMMON_GATE = YES, NO

INSTALLOPOS_CO_COMMON_IMGSCANNER = YES, NO

INSTALLOPOS_CO_COMMON_ITEMDISPENSER = YES, NO

INSTALLOPOS_CO_COMMON_LIGHTS = YES, NO

INSTALLOPOS_CO_COMMON_RFIDSCANNER = YES, NO

OPOS Service Objects

INSTALLOPOS_SOS=YES, NO

NCR OPOS 2.x

INSTALL_LEGACYOPOS=YES, NO

INSTALLOPOS_SO_5932=YES, NO

INSTALLOPOS_SO_5945=YES, NO

INSTALLOPOS_SO_5991=YES, NO

INSTALLOPOS_SO_5992=YES, NO

INSTALLOPOS_SO_7448KEYLOCK=YES, NO

(Default YES on 7448; NO on all other terminal types)

INSTALLOPOS_SO_CASHDRAWER=YES, NO

INSTALLOPOS_SO_POSPRINTER=YES, NO

INSTALLOPOS_SO_HARDTOTALS=YES, NO

INSTALLOPOS_SO_INTEGRATEDMSR=YES, NO

(Default YES on 7401, 7448, 7454, 7455, 7460, PC; NO on all other terminal types) INSTALLOPOS_SO_7443_INTEGRATEDMSR=YES, NO

(Default YES on 7443; NO on all other terminal types)

INSTALLOPOS_SO_INTL_LINEDISPLAY=YES, NO

INSTALLOPOS_SO_LINEDISPLAY=YES, NO

INSTALLOPOS_SO_MOTIONSENSOR=YES, NO

(Default YES on 7401, 7402, 7404, 7454, 7455, PC; NO on all other terminal types)

INSTALLOPOS_SO_78XX=YES, NO

WEDGES=YES, NO

INSTALLOPOS_SO_POSKEYBOARD=YES, NO

INSTALLOPOS_SO_TONE=YES, NO

INSTALLOPOS_SO_WEDGEKEYLOCK=YES, NO

INSTALLOPOS_SO_WEDGEMSR=YES, NO

INSTALLOPOS_SO_WEDGESCANNER=YES, NO

OPOS - Retail Controls 3.x

INSTALL_RCOPOS=YES, NO

INSTALL_RCOPOS_SO_BIOMETRICS=YES, NO

INSTALLRC_MODEL_BIOMETRICS=YES, NO

INSTALL_RCOPOS_SO_CASHDRAWER=YES, NO

INSTALLRC_MODEL_CASHDRAWER=YES, NO

INSTALL_RCOPOS_SO_CHECKSCANNER=YES, NO

INSTALL_RCOPOS_SO_HARDTOTALS=YES, NO

INSTALLRC_MODEL_HARDTOTALS=YES, NO

INSTALL_RCOPOS_SO_KEYLOCK=YES, NO

INSTALLRC_MODEL_KEYLOCK=YES, NO

INSTALL_RCOPOS_SO_LINEDISPLAY=YES, NO

INSTALLRC_MODEL_LINEDISPLAY_5972=YES, NO

INSTALLRC_MODEL_LINEDISPLAY_7402APA=YES, NO

(Default YES on 7402; NO on all other terminal types)

INSTALLRC_MODEL_LINEDISPLAY_74022x20=YES, NO

(Default YES on 7402; NO on all other terminal types)

INSTALLRC_MODEL_LINEDISPLAY_744x2x20=YES, NO

(Default YES on 7443, 7446; NO on all other terminal types)

INSTALLRC_MODEL_LINEDISPLAY_5975x=YES, NO

INSTALLRC_MODEL_LINEDISPLAY_5976x=YES, NO

INSTALLRC_MODEL_LINEDISPLAY_5973=YES, NO

INSTALLRC_MODEL_LINEDISPLAY_XSERIES= YES, NO

OPOS_LINEDISP_XSERIES_2X20_PROFILE=”YES, NO”

OPOS_2244_LINEDISP_XSERIES_2X20_PROFILE=”YES, NO”

OPOS_2245_LINEDISP_XSERIES_2X20_PROFILE=”YES, NO”

OPOS_7702_LINEDISP_XSERIES_2X20_PROFILE=”YES, NO”

OPOS_7703_LINEDISP_XSERIES_2X20_PROFILE=”YES, NO”

OPOS_7707_LINEDISP_XSERIES_2X20_PROFILE=”YES, NO”

INSTALLRC_MODEL_LINEDISPLAY_XSERIES_INT= YES, NO

OPOS_LINEDISP_XSERIES_INT_PROFILE=”YES, NO”

INSTALL_RCOPOS_SO_MICR=YES, NO

INSTALL_RCOPOS_SO_MOTIONSENSOR=YES, NO

(Default YES on 7402, 7404; NO on all other terminal types)

INSTALLRC_MODEL_MOTIONSENSOR=YES, NO

(Default YES on 7402, 7404; NO on all other terminal types)

INSTALLRC_MODEL_MOTIONSENSOR_SYSMON=YES, NO

(Default YES on 7402, 7404; NO on all other terminal types)

INSTALL_RCOPOS_SO_MSR=YES, NO

INSTALLRC_MODEL_MSR=YES, NO

INSTALLRC_MODEL_5966MSR=YES, NO

INSTALLRC_MODEL_NCRICM330DIPMSR=YES, NO

INSTALLRC_MODEL_XSERIESMSR = YES, NO OPOS_XSERIES_MSR_PROFILE="YES, NO"

OPOS_2244_XSERIES_MSR_PROFILE="YES, NO"

OPOS_2245_XSERIES_MSR_PROFILE="YES, NO"

OPOS_7702_XSERIES_MSR_PROFILE="YES, NO"

OPOS_7703_XSERIES_MSR_PROFILE="YES, NO"

OPOS_7707_XSERIES_MSR_PROFILE="YES, NO"

INSTALL_RCOPOS_SO_POSPRINTER=YES, NO

INSTALLRC_MODEL_POSPRINTER_71XX=YES, NO

INSTALL_RCOPOS_SO_HYDRAPRINTER=YES, NO

INSTALLRC_MODEL_HYDRAPRINTER_K5XX=YES, NO

INSTALLRC_MODEL_HYDRAPRINTER_MOD34=YES, NO

INSTALL_RCOPOS_SO_SCALE=YES, NO

INSTALLOPOS_SO_SCALE_78XX=YES, NO

INSTALL_RCOPOS_SO_SCANNER=YES, NO

INSTALLRC_MODEL_SCANNER_78XX=YES, NO

INSTALL_RCOPOS_SO_TONEINDICATOR=YES, NO

INSTALLRC_MODEL_TONEINDICATOR=YES, NO

OPOSUtilities

INSTALL_OPOSDATACAP=YES, NO

PROFILE_MANAGER=YES, NO

UPS_INSTALL=YES, NO, MIGRATE

(Default YES on 7452, 7453, 7456, 7457, 7458; NO on all other terminal types)

INSTALL_WEDGECONFIG=YES, NO

INSTALL_7443_7404_MSR_CONFIG=YES,NO

(Default YES on 7443/7404; NO on all other terminal types)

OPOSMisc

OPOS_DEVTOOLS=YES,NO

OPOS_FORMDESIGNER=:YES,NO

OPOS_INCLUDEFILES=YES,NO

OPOS_MESSAGEFILES=YES,NO

OPOS_HELPFILES=YES,NO

JavaPOS

INSTALLJAVAPOS=YES,NO

DeviceServices

INSTALLJAVAPOS20=YES,NO

INSTALLJAVAPOS21=YES, NO

INSTALLRCJAVAPOS=YES, NO

INSTALLRCJAVAPOS_SO_BIOMETRICS=YES, NO

INSTALLRCJAVAPOS_MODEL_BIOMETRICS_DPFINGERPRINT=YES, NO

7895 Zebra Scanner

ZEBRA_SCANNER_DRIVER= YES, NO

OPOS Profiles

CONFIG_HANDLING1=DEFAULTS, NONE

1. DEFAULTS: Install standard OPOS profiles for a given terminal type

2. NONE: Do not install any OPOS profiles

For Upgrade:

CONFIG_HANDLING=PRESERVE, NONE

1. PRESERVE: Loads saved and default profiles

2. NONE: Do not install any OPOS profiles

JavaPOS Profiles

JAVAPOS3X_CONFIG_HANDLING=DEFAULTS, NONE

1. DEFAULTS: Install standard JavaPOS profiles for a given terminal type

2. NONE: Do not install any JavaPOS profiles

UPS Support

1. UPSCOMPORT: COM1...COM9

2. RIDETHROUGHTIME: set any number in seconds for ride through time

3. SHUTDOWNTIME: set any number in seconds for shutdown time

Wedges

W2KSMSACTION=WEDGE, SMS

1. WEDGE: Wedge keyboard has control after install

1. SMS: SMS Remote Keyboard has control after install

W2KSMS = Installed, NotInstalled

1. Installed: SMS Remote Keyboard is installed

2. NotInstalled: SMS Remote Keyboard is not installed

RSM Options:

Standalone Mode

RSM_MANAGED_TERMINAL=T, F

1. T: RSM attempts to connect to a server

2. F: RSM operates in standalone mode

UNMANAGED_SNMP_SUPPORT

- Setting this parameter equal to T will allow the NCRFSM component to start even though the terminal is not configured to communicate with a RSM Server.  The NCRFSM component is required for SNMP functionality to work properly.  This parameter is only used if the RSM_MANAGED_TERMINAL property is set equal to F.

Server Name

RSM_SERVER_NAME = RSM’s mirror server name (if not specified and client is managed, auto discovery will be enabled)

RSM_SERVER_NAME2 = RSM’s mirror server name for Dual Server only

Thresholds

EVENT_THRESHOLDS= is the fully qualified path to .reg files containing event thresholds to register during installation

TALLY_THRESHOLDS= is the fully qualified path to .reg files containing tally thresholds to register during installation

VNC Settings

VNC_PASSWORD= password VNC server should use when clients connect

Security Setting Options

For internet explorer setting options for XP SP2

CONFIGURE_SECURITY_SETTINGS=Y, N

1. Y: It allows modifying Internet Explorer browser security settings required for RSM.

2. N: Does not allow modifying Internet Explorer browser security settings. If browser settings are not modified during installation, the required settings must be modified manually for full RSM functionality. Refer to the RSM User’s Guide for more information.

Firewall Setting Options

FIREWALL_SETTINGS = Y, N

1. Y: It modifies the Firewall Settings of the system that is needed for RSM.

2. N: Does not modify the Firewall Settings at all.

NOTE: If N is selected or another firewall is present, the RSM required ports, must be opened manually. Refer to the RSM User’s Guide for more information.

Event Log Wrapping

Application Log – contains events logs by programs. For example, records a file error

APPLOGWRAP = YES , NO

1. YES: Windows overwrite old application log event as it sees fit

2. NO: does not overwrite old application log event

Security Log – records events such as valid and invalid logon attemps, as well as events related to resource use, such as creating, opening, or deleting of files

SECLOGWRAP = YES , NO

1. YES: Windows should overwrite old security logs events as it sees fit

2. NO: does not overwrite security logs event

System Log – contains events logged by Windows XP system components. For example, driver fails to load during startup.

SYSLOGWRAP = YES , NO

1. YES: Windows should overwrite old system logs events as it sees fit

2. NO: does not overwrite system logs event

Miscellaneous:

INIFILE= is a configuration file that contains configuration data, a fully qualified path to INI file containing parameters. This is used in order to make the configuration easier. Initialize file is of three (3) parts, the Section which starts with ‘[’and ends with ‘]’, the parameters which are made up of a key (INSTALLCP), an equal sign (=) and a value (YES/NO). And lastly is the comment that begins with ‘;’.

Example of file.ini:

[Parameters]

INSTALLCP=YES

INSTALLOPOS=YES

INSTALLJAVAPOS=YES

INSTALLJCLJAVAPOS=NO

INSTALLSM=NO

INSTALLRC=NO

CONFIG_HANDLING=NONE

W2KSMSACTION=WEDGE

INSTALLSYSMON=YES

INSTALLRSM=NO

INSTALLTYPE=OFFLINE

INSTALLOPOS_CO_NCR_CASHDRAWER=YES

INSTALLOPOS_CO_NCR_COINDISPENSER=YES

Command Line example using INIFILE parameter:

Msiexec /i "E:\Retail Platform Software for Windows.msi" INIFILE=C:\Inifile_path\EXAMPLE.INI

For silent install:

MSI:

Msiexec /i "E:\Retail Platform Software for Windows.msi" /qn INIFILE=C:\Inifile_path\EXAMPLE.INI

EXE:

“Retail Platform Software for Windows.exe” /s /v” INIFILE=C:\Inifile_path\EXAMPLE.INI /qn”

Note: for silent installation, always include ACCEPT_EULA=YES parameter.

Sample INI content scenario:

1.) Installing JavaPOS 3x without OPOS:

[Parameters]

INSTALL_RCOPOS=NO

INSTALLJAVAPOS=YES

2. Installing both OPOS 2x and OPOS 3x (CO and SO) at the same time but no default profiles installed:

[Parameters]

INSTALLOPOS_COS_NCR=YES ; NCR Control Objects

INSTALL_LEGACYOPOS=YES ; NCR OPOS 2.8 Service Objects

CONFIG_HANDLING1= NONE ; No default profiles installed

3.) Selecting only specific devices (e.g. only OPOS 3.x XSeriesMSR model and 78xx Scanner model should be installed)

[Parameters]

INSTALL_RCOPOS_SO_CASHDRAWER=NO

INSTALL_RCOPOS_SO_CHECKSCANNER=NO

INSTALL_RCOPOS_SO_HARDTOTALS=NO

INSTALL_RCOPOS_SO_KEYLOCK=NO

INSTALL_RCOPOS_SO_LINEDISPLAY=NO

INSTALL_RCOPOS_SO_MICR=NO

INSTALL_RCOPOS_SO_MOTIONSENSOR=NO

INSTALLRC_MODEL_MSR=NO

INSTALLRC_MODEL_5966MSR=NO

INSTALLRC_MODEL_NCRICM330DIPMSR=NO

INSTALLRC_MODEL_XSERIESMSR=YES

INSTALL_RCOPOS_SO_POSPRINTER=NO

INSTALL_RCOPOS_SO_HYDRAPRINTER=NO

INSTALL_RCOPOS_SO_SCALE=NO

INSTALLRC_MODEL_SCANNER_78XX=YES

INSTALL_RCOPOS_SO_TONEINDICATOR=NO

INSTALL_RCOPOS_SO_SCANWATCH =NO

4.) Selecting only specific OPOS profiles (e.g OPOS 3.x POSPrinter K590, Scale 7872 and HardTotals disk profiles should be installed) and no JavaPOS profiles.

[Parameters]

CONFIG_HANDLING1= NONE

OPOS_HARDTOTALS_DISK_PROFILE=YES

OPOS_K590_POSPRINTER_PROFILE=YES

OPOS_7872_SCALE_PROFILE=YES

INSTALLJAVAPOS=YES

JAVAPOS3X_CONFIG_HANDLING=NONE

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download