Finding t-critical values with your Calculator
Finding t-critical values with your Calculator
Ti-84 calculator (very different for Ti-83 ? scroll down for instructions)
Ok, if all you need is the t-critical value and that is it, then you would do this:
2nd then VARS (which is DISTR) and then go to invT
type in the area to the LEFT and the degrees of freedom.
So if you had 0.02 to the right and n = 8 (so 7 degrees of freedom)
the area to the left is 1 - 0.02 = 0.98. The calc only works with the area to the left, so you always have to "convert it".
then you would type in invT(0.98, 7) and you would get 2.517 (if rounded to three places)
[Or for example if you were told something like "90% level of confidence" you know that means there is 10% left for the two tails, so there is 5% in each tail, so there is 5% to the right and therefor 95% to the left.]
You can also enter the area to the right (in the right tail) and then take the absolute value of the critical value. Because you have symmetry on both sides, for example if the critical value with an area to the right of 4% and 10 degrees of freedom you could find invT(0.04,10) and you would get -1.948. Since you actually wanted the area to the RIGHT to be 0.04 and this found the area to the left, just use positive 1.948 and that is the answer.
Ti-83 calculator
*please keep in mind before reading this that you will NOT be asked to find a t-critical value on the final exam because the proctor will erase all programs from your calculator. Since you will not have tables, and cannot do this without the program, you will not be asked to do it. THEREFORE, if you
want to just use the table to find this value while doing the homework and quizzes rather than bothering with this program, that is what I would suggest.
The Ti-83 does not have the "invT" function. You can program this:
into your Ti-83 to find t-critical values (or just use the table ? see above).
If it says area in right is .025, then calculate 1-.025=.975, use .975 then enter the degrees of freedom (because it will use the area to the left). When this prompt comes up in the program you can just type 1-.025 then the degrees of freedom. Don't subtract 1 (as in n-1) because it calculates only area to the LEFT. This will all make sense one you input the program!
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- math 124 using the t table to find p values
- p value calculation made easy with the sas lex jansen
- statistics 10 finding pvalues website
- finding t critical values with your calculator
- finding p values using the t distribution
- the f test by hand calculator nz
- find p values with the ti83 ti84 san diego mesa college
- finding p values ti 84 instructions
- using your ti 83 84 89 calculator for hypothesis testing
- the illustrations below are for the t test you would find
Related searches
- statistics critical values calculator t
- t test critical values table
- z distribution critical values table
- critical values to p value calculator
- find critical values calculator
- table of critical values x2
- critical values for correlation coefficient
- critical values for pearson r
- t critical value calculator from standard deviation
- t distribution critical values chart
- critical values calculator
- critical values of z