January 21, 2009

January 23, 2020

Darryl Hudson

68 Bluegrass Drive

Aiken, SC 29803

(803) 649-6641

darryl@

The following is a partial list of items I have in stock. I am adding to this list almost daily. If you don't see what you need please email, call, or write with questions.

BRUSH CAPS AND BRUSHES:

Various brush caps and brushes in stock, call or write for specifics. Custom orders with few days notice. Items below normally in stock:

BRUSH CAPS PRICE ORDER #

***Also search for brush caps under manufacturer’s name. Not all brush caps are listed here.***

Breezer, 8” stationary ………………………………$24.00/pr.# BBC01

Dayton, type 22……………………………………..$24.00/pr.# DBC01

Diehl, tab foot/ornate base…………………………$24.00/pr.# DBC02

Eck, 8” stationary tab base………………………….$33.00 pr.# EBC1

Emerson, Duplex Gyro Fan…………………………$44.00 pr.# EBC2

Emerson, Northwind 44…………………………….$40.00/pr. # ENBC2

Emerson, Northwind 450……………………………$40.00/pr. # ENBC1

Fidelity, 8” wire yoke mount………………………..$24.00/pr.# FBC01

Ft. Wayne, 8” ball motor “Woods System”…………$24.00/pr.# FW01

GE, DC all brass, blk delrin w/ steel spring guide pin$65.00/pr.# GEBC02

GE, DC, blk delrin w/ protruding brass pin………..$55.00/pr.# GEDC03

GE, BMY DC, blk delrin w/ no protruding pin…….$40.00/pr.# GEDC04

Hamilton Beach, models 30 & 33………………….$24.00/pr.# HBBC1

Hamilton Beach, model 27………………………….$24.00/pr.# HBBC2

Hamilton Beach, model 25…………………………$24.00/pr# HBBC3

Hamilton Beach, model 18………………………….$24.00/pr.# HBBC4

Hamilton Beach, model 10………………………….$24.00/pr.# HBBC5

Hunter, (GE) 220V DC, SMY, & Loop Handle osc. $40.00/pr.# GEBC01

Jandus, all brass…………………………………….$24.00/pr.# WHBC1

Marelli, 12” round ball motor w/ flowers, tab base….$60.00/pr.# MBC05

Menominee, clamshell type 150 &164……………..$24.00/pr.# MBC04

Menominee, 8” stat., 4 cast struts, early type motor$35.00/pr.# MBC06

MESCO, ball motor brush caps, 110V DC ball motor$50.00/pr.# MBC03

Myers, malt mixer brush cap……………………….$40.00/pr# MMBC1

Mysto, (Gilbert), fits 6” model w/ open front cage…$50.00 pr.# GMBC1

Peerless, 10" front osc………………………………$22.00/pr. # PBC01

Peerless, 110V DC motor, Style EE127…………….$55.00/pr.# PBC02

Peerless, Style AA18 motor…………………………$60.00/pr.# PBC03

R&M/Western Electric Tank Motors……………….$40.00/pr. # RMBC1

R&M, 8” DC motor w/ open exposed commutator…$55.00/pr.# RMBC8

R&M, 8” List #2835, 32V………………………….$24.00/pr.# RMBC2

R&M, List # 6000, AC/DC model………………….$45.00/pr.# RMBC3

R&M, List # 1500 & 1505………………….……….$55.00/pr.# RMBC7

R&M, 6” brass & brass, List # 2800…………………$50.00/pr.# RMBC6

R&M, 10” five blader, List #2610…………………..$45.00/pr.# RMBC4

R&M, 10” B/S, List # 2203…………………………$45.00/pr.# RMBC5

Western Electric, tank motor (by Westinghouse)…..$40.00 pr.# RMBC1

Westinghouse, all brass……………………………..$24.00/pr. # WHBC1

BRUSH CAPS (cont.)PRICEORDER #

***Also search for brush caps under manufacturer’s name. Not all brush caps are listed here.***

Westinghouse, 10” Style #2728540, DC model…….$24.00 pr.# WHBC4

Westinghouse, gyro………………………………….$24.00/pr. # WHBC1

Western Electric, Tank Motor (by Westinghouse)…..$40.00 pr.# RMBC1

Westinghouse, all brass……………………………..$24.00/pr. # WHBC1

Westinghouse, 10” Style #2728540, DC model…….$24.00 pr.# WHBC4

Westinghouse, gyro………………………………….$24.00/pr. # WHBC1

Westinghouse, DC tank motor, brass, 5/16-18 thread$50.00/pr.# WHBC5

Westinghouse, DC tank motor, blk. delrin, no thread$40.00/pr.# WHBC7

Westinghouse, vane oscillator……………………….$24.00/pr.# WHBC2

Westinghouse, Whirlwind, (½” head dia)style 98926B$24.00/pr.# WHBC3

Westinghouse, Whirlwind, (5/16” head dia.)……….$24.00/pr.# WHBC6

FEET, RUBBER:

STEM DIA.STEM LENGTHFOOT DIA.FOOT THKNESS PRICE ORDER #

.250" (1/4”).250" (1/4”).500" (1/2”).218" (7/32”)$1.00 ea. # FR01

.281" (9/32”).218" (7/32”).562" (9/16”).157" (5/32”)$1.00 ea. # FR02

.312" (5/16”).250" (1/4”).625" (5/8”).312" (5/16”)$1.00ea. # FR03

.375" (3/8”).375" (3/8”).750" (3/4”).125" (1/8”) $1.00 ea. # FR04

.406" (13/32”).312" (5/16”).625" (5/8”).093" (3/32”) $1.00 ea. # FR05

.500" (1/2”).281" (9/32”).750" (3/4”).125" (1/8”) $1.00 ea. # FR06

FEET, OTHER REPLACEMENT:PRICEORDER #

Dayton, tab base, blk delrin foot insert w/ rubber pad……$35.00/set of 3# FR11

Eck, Hurricane replacement feet, blk. Delrin w/ rubber pad $38.00/set of 4# FR09

Emerson, replacement rubber feet for step base fans………$10.00/set of 4# ERF7

GE, A-23 two bulb model heater feet, blk. Delrin………$25.00/set of 4# GEA23A

GE, pedestal fan feet (delrin), C’bored hole for screw…………$28.00/set of 4# FR07

Menominee, bank teller replacement feet, rubber, 5/8” OD………….$2.50 ea.# FR12

Menominee, feet, 8” tab base, blk. Delrin w/ rubber pad……$35.00/set of 3# FR10

R&M, lollipop replacement feet, blk. Delrin w/ rubber pad……$35.00/set of 3# FR08

GROMMETS, PRESS IN: PRICE ORDER #

GE, pancake, 1903-07, pwr. cord, black Delrin………………………$ 8.00 # GEPC10

GE, pancake, 1903-07, pwr. cord, ebony wood (as orig.)…………$13.50 # GEPC11

GE, pancake, 1903-07, head wire, black Delrin……………………$10.00 # GEPC12

GE, pancake, 1903-07, head wire, ebony wood (as orig.)…………$16.00 # GEPC13

GROMMETS, RUBBER:

Note: The following grommets have a groove width of 1/16" and will fit stamped steel type fans.

GROOVE WIDTH GROOVE DIAHOLE SIZETHK.O.D. PRICE ORDER #

.062" (1/16”).250" (1/4”).125" (1/8”).218".343"$1.00 ea # 062250

.062" (1/16”).375" (3/8”).250" (1/4”).187".500"$1.00 ea# 062375

.062" (1/16”).437" (7/16”).250" (1/4”).187".625"$1.00 ea# 062437

.062" (1/16”).500" (1/2”).375" (3/8”).281".687"$1.00 ea # 062500

.062" (1/16”).562" (9/16”).437" (7/16”).250".750"$1.00 ea# 062562

GROMMETS, RUBBER (cont.):

Note: The following grommets have a groove width of 1/8" to 3/16" and will fit cast iron type fans.

GROOVE WIDTHGROOVE DIA. HOLE SIZETHK.O.D. PRICE ORDER #

.125" (1/8”).312" (5/16”) .187" (3/16”) .250".437" $1.00 ea # 125312

.125" (1/8”).406" (13/32”).265" (17/64”).375".625" $1.00 ea# 125406

.125" (1/8”).437" (7/16”).250" (1/4”) .250".625" $1.00 ea# 125437

.125" (1/8”).500" (1/2”).312" (5/16”).375".750" $1.00 ea# 125500

.125" (1/8”).531" (17/32”).375" (3/8”).500".750"$2.00 ea# 125531

.125" (1/8”).562" (9/16”).312" (5/16”).375".812" $1.00 ea # 125562

.156" (5/32”).375" (3/8”).281" (9/32”) .343".625" $1.00 ea # 156375

.187" (3/16”).500" (1/2”).250" (1/4”) .437".625" $2.00 ea # 187500

GROMMETS, SCREW-IN:PRICEORDER #

Emerson, large…………………………………………………………$ 6.00# ESG1

Emerson, small………………………………………………………..$ 8.00# ESG2

Menominee, large…………………………………………………..…$ 6.00# MSG1

Menominee, small……………………………………………………..$ 8.00# MSG2

R&M, tank motor, large……………………………………………….$ 6.00# RMSG1

R&M, tank motor, small………………………………………………$ 8.00# RMSG2

Westinghouse, tank motor, large……………………………………..$ 6.00# WHSG1

Westinghouse, tank motor, small…………………………………….$ 8.00# WHSG2

MISCELLANEOUS PARTS:PRICEORDER #

Adams Bagnall, oil cup for wire mount (not GE type motor)……$30.00 ea.# ABOC1

Adams Bagnall, C frame, arm to slot guide screw…………………$65.00 ea.# ABJ01

Breezer, brush caps for 8” stationary fan……………………………$24.00 pr.# BBC01

Carleton, oil cup for 6” fan…………………………………………….$30.00 ea.# COC1

Carleton, oil cup for 8” Ball Motor………………………………….$33.00 ea.# CBMO1

Carleton, 8” ball motor oil cup holder (screws into motor housing

under shaft)…………………………………………………..………..$45.00 ea.# CBM02

Carleton, motor stud, for 8” ball motor……………………………$28.00 ea.# CBM03

Century, S3 gearbox shaft w/ ball detents, model 152…………$140.00 ea.# CGS01

Century, oil cup (complete w/ wick tube & spring) for model #351$50.00 ea.# COA1

Century, oiler (compl assy w/ wick,tube & spring) for S3 model…..$100.00 ea.# COA2

Colonial, arm to wheel shoulder screw for tab base, LH thread..$30.00 ea. #CSS01

Commandaire, arm/wheel shoulder screw for 10” cat#2405, LH thread$16.00 ea.# CSS02

Commandaire, arm/neck shoulder screw for 10” cat# 2405……$16.000 ea.# CSS03

Dayton, brush caps for 8" tab base, Type 22 model………………$24.00 pr.# DBC01

Dayton, tab base, blk delrin foot insert w/ rubber pad…………$35.00/set of 3# FR11

Diehl, Aristocrat 10”, arm to wheel shoulder screw, steel……$20.00 ea.# DSS03

Diehl, bearing for ornate tab base, barrel-shaped O.D……………$40.00 ea.# DB01

Diehl, brush caps for 1906 tab foot/ornate base fan……………$24.00 pr.# DBC02

Diehl, oil cup for 1906 tab foot/ornate base fan……………………$36.00 ea.# DOC1

MISCELLANEOUS PARTS (cont.):PRICEORDER #

Diehl, oil cup holder/bushing for ornate tab base fan, c.1906……$44.00 ea.# DOC2

Diehl, Pullman coach car 8" fan oiler, complete……………………$100.00 ea.# DPC01

Diehl, Pullman coach car 10" fan oiler complete…………………$100.00 ea.# DPC02

Diehl, Pullman coach car oiler screw, fits above shaft, brass……$18.00 ea.# DOS1

Diehl, Pullman coach car yoke to motor shoulder screw, brass…$22.00 ea.# DSS01

Diehl, Style #F16512 shoulder screw, brass………………………$20.00 ea.# DSS02

Eck, brush caps for 8” stationary tab base fan……………………$33.00 pr.# EBC1

Eck, Hurricane osc. front bearing (AC model-blue tag)……………$40.00 ea.# EOB1

Eck, Hurricane, osc. rear bearing (AC model-blue tag)……………$40.00 ea.# EOB2

Eck, Hurricane osc. front bearing (DC model-red tag)……………$40.00 ea.# EOB3

Eck, Hurricane, osc. rear bearing (DC model-red tag)………………$40.00 ea.# EOB4

Eck, Hurricane stationary front bearing (AC model-blue tag)………$40.00 ea.# ESB1

Eck, Hurricane stationary rear bearing (AC model-blue tag)………$40.00 ea.# ESB2

Eck, Hurricane grease cup, complete……………………….……$105.00 ea.# ECK03

Eck, Hurricane osc., pinion gear, steel……………………………$145.00 ea.# EHPG1

Eck, Hurricane, replacement feet, Delrin w/ rubber pad……………$40.00 set# FR09

Edison, pwr. cord terminal hex locknut, brass……………………$10.00 ea.# TAE01

Edison, pwr. cord terminal thumb nut, knurled brass………………$18.00 ea.# TAE02

Edison, oiler drain plug thumbscrew, knurled brass (6 blade models)..$18.00 ea.# TAE03

Emerson, tripod (EI1) Oil Reservoir & Cap…………………………$110.00 ea.#ETOR1

Emerson, 1010 screw, fits rear motor housing, brass………………$20.00 ea.#ESS14

Emerson, 1500/11644 back motor housing screw for rear end of shaft$20.00 ea.# EMHS4

Emerson, 1500/11644 front rotor keeper, for front end of hollow shaft$16.50 ea.# EFRK1

Emerson, 1500/11644 pwr. term. binding post thumb nut, blk Delrin

w/ brass thread insert……………………………………..$37.00 pr.# EBPK1

Emerson, 1500/11644 rotor keeper shaft & washer………………$14.00 ea.# ERKS1

Emerson, 14644 back motor housing screw for rear end of shaft,

brass, slotted…………………………………………..$20.00 ea.# EMHS1

Emerson, 14644 brass rotor keeper, fits front of hollow shaft……$20.00 ea.# ERK1

Emerson, 14646 front rotor keeper, fits front end of hollow shaft $20.00 ea.# EHSC1

Emerson, 19646 back motor housing screw for rear end of shaft,

brass, slotted……………………………………………….$20.00 ea.# EMHS2

Emerson, 21646 osc. connecting arm link…………………………$40.00 ea.# EOA1

Emerson, 21666 osc. arm to wheel shoulder screw…………………$20.00 ea.# ESS1

Emerson, 26646 rear motor housing bearing plug, LH thread….$30.00 ea.# EMHS3

Emerson, 27645 osc. Arm to wheel shoulder screw………………$20.00 ea.#ESS11

Emerson, 73646 osc. arm to wheel shoulder screw………………$20.00 ea.# ESS2

Emerson, 29645 osc arm to wheel shoulder screw………………$20.00 ea.# ESS10

Emerson, 29646 osc. arm to wheel shoulder screw………………$20.00 ea.#ESS12

Emerson, acorn nuts, hex brass, set of 4……………………….$30.00/set of 4# EAN1

Emerson, arm to collar shoulder screw……………………………….$18.00 ea.# ESS8

Emerson, blade hub/rotor leather seal, fits 8" & 9” fans…………$3.50 ea.# ERS1

Emerson, blade hub/rotor leather seal, fits 12" & 16" fans…………$3.50 ea.# ERS2

Emerson, ceiling fan switch key, fits CF14, CF20, CF24, etc…….$75.00 ea.# ECF01

Emerson, ceiling fan key yoke, female part key fits into…………$45.00 ea.# ECF02

Emerson, ceiling fan lead oil seals, fits early Emersons c.'97-'10 $3.00 ea.# ECF03

Emerson, Duplex Gyro Fan brush caps……………………………….$40.00 pr.# EBC2

Emerson, Duplex Gyro Oiler, brass, complete w/ spring & wick…$100.00 ea.# EGF01

Emerson, fiber washers, rotor/hollow shaft………………………$0.33 ea. # EFW1

Emerson, Golden Jubilee, shoulder screw, arm to wheel…………$ 20.00 ea.# ESS3

MISCELLANEOUS PARTS (cont.): PRICE ORDER #

Emerson, hex bushing, LH thread, fits rear, guides worm shaft…$20.00 ea. # EHB1

Emerson, Jr arm to wheel shoulder screw……………………………$20.00 ea.# ESS9

Emerson, lever osc. arm to wheel top shoulder screw…………$22.00 ea. # ESS4

Emerson, lever osc. bottom left link shoulderless screw ………$20.00 ea. # ENS1

Emerson, lever osc. lower connecting link, to neck………………$25.00 ea. # EOA2

Emerson, lever osc. pinion gear, next to worm gear………………$25.00 ea.# EG01

Emerson, lever osc. top link shoulder screw………………………$20.00 ea. # ESS5

Emerson, Northwind 44 brush caps…………………………………$40.00 pr.# ENBC2

Emerson, Northwind 450 brush caps……………………………$40.00 pr. # ENBC1

Emerson, Northwind 450 shoulder screws, arm to wheel………$ 20.00 ea. # ESS6

Emerson, replacement rubber feet for step base fans………$ 10.00/set of 4 # ERF7

Emerson, screw-in grommet, large………………………………….$ 6.00 ea. # ESG1

Emerson, screw-in grommet, small………………………………….$ 8.00 ea. # ESG2

Emerson, Silver Swan (pedestal model) osc. link……………….$35.00 ea. # EOA3

Emerson, Silver Swan osc. link shoulder screw…………………$20.00 ea. # ESS7

Emerson, Silver Swan osc. drive shaft………………………………$50.00 ea.# ESDS1

Emerson, Silver Swan (pedestal) osc. drive shaft, steel, hex $50.00 ea.# ESDS2

Emerson, switch lever knob……………………………………………$40.00 ea.# ESK1

Emerson, switch screw & retaining nut (square nut)………………$32.00 ea.#ESS13

Emerson, tripod base pwr. term. binding post screw…………….$42.00/pr.# EBPK2

Emerson, tripod cage to motor screw, steel…………………………$20.00 ea.# ETS1

Emerson, yoke mount neck set screw, brass, goes into side of ball on

top of base, square threads…………………………………$24.00 ea.# ENS2

Eskimo, oil cup for 16” cob web cage w/ 3 prop cast alum blade$35.00 ea.# EOC1

Fueton-Bell Co., brush caps & brush holder, for Cyclone mixer…$85.00/pr.# FBBC1

FIBER WASHERS: Various sizes in stock, call for sizes and price.

MISCELLANEOUS PARTS (cont.) : PRICEORDER #

Fidelity, brush caps for 8” B/B wire yoke model…………………$24.00/pr.# FBC01

Fidelity, collar, spacer, small, brass…………………………………$20.00 ea.# FOC03

Fidelity, collar, spacer, large, brass…………………………………$20.00 ea.# FOC04

Fidelity, neck stub, brass, connects to arm………………………$28.00 ea.# FOC02

Fidelity, oiler, 12” lever osc., open gear model, 2 pc. oiler

complete w/ spring & wick……………………………..….$100.00 ea.# FOC07

Fidelity, pin, steel, to fit gear to shaft………………………………$11.00 ea.# FOC06

Fidelity, shoulder screw and hex nut, brass, for osc. link……….$28.00/set# FOC05

Ft. Wayne, brush caps, for 8” Woods system ball motor fan……….$24.00 pr.# FW01

Ft. Wayne, motor nuts, for 8” Woods system ball motor fan………..$9.00 ea.# FW02

GEARS: Custom made with some info. Various gears in stock, list on request. Call with specs for price.

MISCELLANEOUS PARTS (cont.) PRICE ORDER #

GE, 1909 sidewinder, bull gear, large brass, 48 tooth……….$150.00 ea. # GESG1

GE, 1909 sidewinder, front bearing…………………………………$35.00 ea.# GEB01

GE, 1909 sidewinder, rotor shaft, pressed into your rotor……….$100.00 ea.# GERS1

GE, 1909 sidewinder, shoulder screw, lever linkage screw

(please define which one when ordering)…………………$28.00 ea. # GESS3

GE, 1909 sidewinder, shoulder screw for 48 tooth brass gear…..$28.00 ea.# GESS6

GE, 1909 sidewinder, shoulder screw for 48 tooth brass gear;

this one takes a 10-32 nut……………………………………...$28.00 ea.# GESS7

MISCELLANEOUS PARTS (cont.): PRICE ORDER #

GE, 1909 sidewinder, small pinion gear, 9 tooth………………$45.00 ea. # GESG2

GE, 1909 sidewinder, track ball for lever/fork…………………….$30.00 ea.# GETB1

GE, 1909 sidewinder, transmission engagement knob, brass……$120.00 ea.# GETK1

GE, 1909 sidewinder, transmission shaft w. dbl detent…………$175.00 ea.# GETS1

GE, 1909 sidewinder, yoke to neck screw, holds yoke to stem of neck..$ 28.00 ea.# GESN1

GE, 75423 loop handle osc. arm to wheel shoulder screw,

special RH thread………………………………………….…….$20.00 ea.# GESS1

GE, 75423 loop handle osc. arm to wheel shoulder screw,

special LH thread……………………………………………..$24.00 ea.# GESS2

GE, 75423/75425 motor screw, special thread, brass…………….$15.00 ea.# GEBS3

GE, 75423 loop handle rear bearing, (fixed, not self-aligning type),

for cast motor & base……………………………..…………….$45.00 ea.# GECB1

GE, 75423 gearbox wormshaft bushing, brass, large dia. set screw$25.00 ea.# GESS11

GE, #78X233 arm to wheel shoulder screw……………………….$20.00 ea.#GESS12

GE, A-23 two bulb heater replacement feet……………….$20.00/set of 4# GEA23A

GE, bearing set, front/rear………………………………………….$70.00 pr. # GESB1

GE, BMY bearing, front or rear, please specify when ordering….$35.00 ea.# GEBMB

GE, big motor oil cup, brass…………………………………………$33.00 ea.# GEBOC

GE, brush caps, for DC motor loop hndl osc., blk. Delrin w/ brass pin$55.00/pr.# GEDC03

GE, brush cap, for BMY DC fan motor, blk. Delrin w/ no pin……$40.00 pr.# GEDC04

GE, brush cap, for SMY DC and Loop Handle fan motor………$40.00 pr.# GEBC01

GE, brush cap, for all brass fans, blk delrin w/ steel spring guide pin$65.00 pr.# GEBC02

GE, cage to strut screws, 1/4-24 X 1/2, brass roundhead ……$ 15.00 ea. # GEBS1

GE, coin-op set screw for timing mechanism……………………$20.00 ea.# GESS4

GE, DC ball motor above bearing screw, brass………………….$20.00 ea.# GEDC02

GE, kidney osc. arm to wheel shoulder screw, steel…………….$24.00 ea.# GESS5

GE, oiler for DC ball motor model…………………………………$100.00 ea.# GEDC01

GE, 1894 Lynn Works Pancake, set screw for blade…………..$20.00 ea.#GELWP1

GE, 1894 Lynn Works Pancake Oiler, brass (not nickel plated).$90.00 ea.#GELWP2

GE, 1897 pancake, acorn nut, brass, not slotted………………$ 8.00 ea.# GEPC26

GE, 1897 pancake, oiler, complete w/ spring & wick…………..$105.00 ea.# GEPC25

GE, pancake acorn nuts, not slotted………………………….$ 8.00 ea. # GEPC07

GE, pancake acorn nuts, slotted………………………………..$ 9.50 ea. # GEPC08

GE, 12” pancake bearing…………………………………………$35.00 ea. # GEPC09

GE, 16” pancake front bearing, tapered OD…………………….$45.00 ea.# GEPC18

GE, 16” pancake rear bearing, tapered OD………………………$45.00 ea. # GEPC19

GE, 16” pancake bearing for the England made model by

GE Ltd., Wooten, England (different than USA model)……$40.00 ea.# GEPC16

GE, pancake, bearing screw, brass,

fits above bearing on front motor snout, 5/16-18 thread…$20.00 ea.# GEPC15

GE, pancake, bearing screw, brass,

fits above bearing on front motor snout, ¼-20 thread…….$20.00 ea.# GEPC23

GE, pancake, bushing, for base switch…………………………$12.00 ea.# GEPC24

GE, pancake grease cup, 1899 model, mounts above shaft…$100.00 ea.# GEPC21

GE, pancake grommet, 1903-1907 pwr cord, blk. Delrin………$10.00 ea.# GEPC10

GE, pancake grommet, '03-'07 pwr cord, ebony (as original). $14.00 ea. # GEPC11

GE, pancake grommet, 1903-1907 head wire, blk. Delrin………$10.00 ea.# GEPC12

GE, pancake grommet, 1903-'07 head wire, ebony (as original)$16.00 ea.# GEPC13

GE, pancake hex nuts, brass……………………………………$ 5.00 ea. # GEPC04

GE, pancake oil cups…………………………………………….$35.00 ea. # GEPC01

GE, pancake oil cup holder………………………………………$55.00 ea. # GEPC02

GE, pancake oil return slingee, brass (returns oil to the oiler). $40.00 ea. # GEPC29

GE, pancake oiler, complete with wick and spring……………$100.00 ea. # GEPC03

MISCELLANEOUS PARTS (cont.): PRICE ORDER #

GE, pancake oiler for 16” “Made in England” model

by GE Ltd. of England, complete……………………………$100.00 ea.# GEPC17

GE, pancake rotor shaft, 5/16” dia., pressed/pinned to your rotor$65.00 ea.# GEPC22

GE, pancake rotor shaft, 3/8” dia., pressed/pinned to rotor $65.00 ea.# GEPC27

GE, pancake switch pointer holder (1903-08)……………………$20.00 ea.#GEPC30

GE, pancake switch shaft, steel, for 5 speed models $50.00 ea. # GEPC28

GE, pancake terminal insulators, blk. Delrin w/ square hole……$35.00 pr.# GEPC14

GE, pancake terminal lug, threaded both ends w/ square mid section…$40.00 ea.# GEPC20

GE, pancake terminal thumb nuts……………………………….$14.00 pr. # GEPC05

GE, pedestal replacement feet, blk. Delrin, C'bored for screw……$45.00 set # FR07

GE, quiet blade oil cup, cat. # 55x165, polished SST looks like chrome$44.00 ea.# GEOC2

GE, set screw for early blade (special thread)…………………$15.00 ea. # GEPC06

GE, star osc. neck swivel "star" knob, brass……………………$40.00 ea. # GESK1

GE, star osc. arm to wheel "star" knob, brass……………………$40.00 ea.# GESK2

GE, star osc. gearbox top star shaped knob for osc. engagement $40.00 ea.# GESK3

GE, star osc. connecting arm bushing (with flange)……………$24.00 ea.# GECAB1

GE, star osc., connecting arm bushing (without flange)………$24.00 ea.# GECAB2

GE, star osc. oil cup, brass…………………………………………$35.00 ea.# GEOC1

GE, star osc., screw, for strut to motor……………………………$ 9.00 ea.# GESS8

GE, star osc., screw, for cage clip (cage to strut)…………………$ 9.00 ea.# GESS9

GE, star osc. and brass bell crank osc gearbox cover screw….$12.00 ea.# GESS10

GE, strut to motor screw, 1/4-24 X 5/16” brass fillet head………$ 9.00 ea.# GEBS2

GE, Vortalex arm to wheel shoulder screw, LH thread………… $20.00 ea.# GEVS1

GLASS BEAD BLASTING: Call for my quote to strip your parts clean for professional looking finishes.

MISCELLANEOUS PARTS (cont.)PRICEORDER #

Hamilton Beach, brush caps, fits #30 and 33 mixers/motors $24.00 pr.# HBBC1

Hamilton Beach, brush caps, fits #27 malt mixers/motors………$24.00 pr.# HBBC2

Hamilton Beach, brush caps, fits #25 mixers/motors……………$24.00/pr.# HBBC3

Hamilton Beach, brush caps, fits #18 mixers/motors……………$24.00/pr.# HBBC4

Hamilton Beach, brush caps, fits #10 mixers/motors…………….$24.00/pr.# HBBC5

Hamilton Beach, brush sleeve & insulator for #10 malt mixer $45.00/ea.# HBBS1

Hamilton Beach, replacement rubber feet for malt mixers….$10.00/set of 4# HBRF1

Hamilton Beach, oiler, for fan motor and home motor……………$100.00 ea.# HBO1

Hamilton Beach, motor mount screw for model #30 malt mixer…$30.00 ea.#HBMS1

Hunter, (by GE) brush caps for DC SMY, and Loop Handle osc…$50.00 pr.# GEBC1

Hunter/Century, arm to wheel shoulder screw, LH thread………$22.00 ea.# HSS01

Hunter, 5211 AdaptAir Ceiling Fan Blade Iron Screw, odd thread$25.00 ea.# HSS02

Hunter/Tuerk, switch housing nut, 7/8” dia. w/ 5/8” thread……$35.00 ea.# HTSHN

Jandus, all brass brush caps………………………………………$24.00 pr.# WHBC1

Lake Breeze, 16” Model A, bearing adjusting screw & nut………$45.00 ea.# LB001

Manhattan, #3 battery fan, oiler, complete w/ spring and wick,

ready to install……………..……………………………..$55.00 ea.# MBFO1

Manhattan, #3 battery fan, thumbscrew, for pwr. terminal……….$14.00 ea.# MBF02

Marelli, brush caps for 10” 220 V AC/DC yoke mount….$24.00 pr.# MBC01

Marelli, brush caps, 12” ball motor w/ flowers cast motor, tab base$60.00 pr.# MBC05

Marelli, brush caps, 360 degree oscillator…………………………$50.00 pr.# MBC07

MISCELLANEOUS PARTS (cont.): PRICE ORDER #

Marelli, brush holder assembly for 10” universal 220V AC/DC.$85.00 pr.# MBC02

Marelli, oiler for dbl. head model, complete w/ spring & wick, $100.00 ea.# MOC01

Martinot, brush components, for star gear/pin drive osc……….$160.00 pr.# MAR01

Menominee, 8" ball motor bearing…………………………………$35.00 ea.# MBMB1

Menominee, 8" tab base neck shoulder screw and nut…………$32.00 set# MNSN1

Menominee, 8" tab base oiler plug, knurled brass………………$24.00 pr.# MOP01

Menominee, 12” ball motor, acorn nut, for strut to motor………$ 8.00 ea.# MBMB2

Menominee, bank teller fan brush caps, knurled brass……………$40.00 pr.# MBT01

Menominee, bank teller fan brush guides, brass…………………$22.00 ea.# MBT02

Menominee, bank teller fan feet, 5/8" OD……………………….$ 2.50 ea. # FR12

Menominee, 8” tab base feet, blk delrin w/ rubber pad…..$30.00 set # FR10

Menominee, bearing (front) for 12” snowflake fan,………………$35.00 ea.# MSB1

Menominee, bearing (rear) for 12” snowflake fan…………………$35.00 ea.# MSB2

Menominee, brush caps for clamshell type 150 & 164……………$24.00 pr.# MBC04

Menominee, 8” stat., 4 cast struts, early type motor……………$35.00/pr.# MBC06

Menominee, grease cup for clamshell motor, mounts over shaft$30.00 ea.# MGC01

Menominee, grommet, screw-in, large………………………………$ 6.00 ea.# MG01

Menominee, grommet, screw-in, small………………………………$ 8.00 ea.# MG02

Menominee, motor nut for vertical switch model, brass……………$ 9.00 ea.#MVS2

Menominee, shoulder screw for osc. arm to wheel connection….$30.00 ea.# MSS1

Menominee, shoulder screw (and hex nut) for osc. arm/neck base$30.00 ea.# MSS2

Menominee, tab base switch "ball shaped" knob, brass,

for early 9" w/ vert. switch knob………………………$40.00 ea.# MSK1

Menominee, feet for tab base, ½" tall, tapered, (set of 3)……$35.00/set of 3# MTF1

Menominee, feet for vert. switch tab base model w/ screws $55.00/set of 3#MVS1

Menominee, neck adjust screw for vertical switch model, knurled.$36.00 ea.#MVS3

Mysto, A.C. Gilbert, brush cap, fits 6” fans w/ open front cage$ 25.00 ea.#GMBC1

MESCO, ball motor brush caps, for 110V DC ball motor…………$50.00/pr.# MBC03

Myers, brush caps for malt mixer…………………………………$40.00/pr.#MMBC1

OIL CUPS: Custom made for your model fan, approx. $25.00 ea. (price may vary per complexity of cup)

MISCELLANEOUS PARTS (cont.)PRICEORDER #

Peerless, bearing for Style OP3 motor…………………………………$40.00 ea.#PB01

Peerless, bearing for Style AA18 motor………………………………..$45.00 ea.#PB02

Peerless, brush caps, for 10” front osc……………………………$24.00/pr.# PBC01

Peerless, brush caps, for 110V DC motor, style EE127………….$60.00 pr.# PBC02

Peerless, brush caps for Style AA18 motor………………………….$60.00 pr.#PBC03

Peerless, arm to wheel shoulder screw, early tab base model. $33.00 ea. # PSS01

Peerless, arm to wheel shoulder screw, for tab base model $33.00 ea.# PSS02

Peerless, brush sleeve for Style AA18 motor……………………$55.00 ea.#PBS01

Peerless, oscillating wheel, aluminum, for 10” rear oscillator, B/S $60.00 ea.# POW1

Richmond Portable Battery Fan, oiler, complete w/ spring and wick,

ready to install…………………$85.00 ea.# RBFO1

Richmond Portable Battery Fan, rear shaft spacer……………….$10.00 ea.# RBF02

R&M, 8” model fiber switch lever…………………………………..$90.00 ea.#RMSL1

MISCELLANEOUS PARTS (cont.): PRICE ORDER #

R&M, arm to wheel shoulder screw for gearback tank motor……$20.00 ea.# RMSS2

R&M, arm to wheel shoulder screw for 12” osc., List #7804……$20.00 ea.# RMSS3

R&M, arm to wheel shoulder screw for List #23004,

for 12” overlapping blade model………………………….$20.00 ea.# RMSS1

R&M, brush cap for 8" List #2835 (32V)…………………………….$24.00 pr.# RMBC2

R&M, brush cap for List #6000 AC/DC model…………………….$45.00 pr.# RMBC3

R&M, brush cap for 10” five blader, List #2610……………………$45.00/pr.# RMBC4

R&M, brush caps for Tank Motor…………………………………….$35.00/pr# RMBC1

R&M, brush caps for 10” List #2203……………………………….$45.00 pr.# RMBC5

R&M, brush cap, 6” brass & brass, List # 2800………………….$50.00 pr.# RMBC6

R&M, brush cap for 8” DC model w/ open exposed commutator.$55.00 pr.#RMBC8

R&M, brush caps for DC Gearback Tank Motor osc………………$55.00/pr# RMBC7

R&M, flag badge, .010” (for 12” & 16” models)……………………$45.00 ea.# RMFB1

R&M, flag badge, .015” (for 12” & 16” models)……………………$45.00 ea.# RMFB2

R&M, front bearing for List #2242 30V DC Navy fan……………$35.00 ea.# RMB01

R&M, lollipop neck brush holder block (insulator)………………$75.00 ea.# RMBHB

R&M, lollipop feet, Delrin w/ rubber pad…………………………$30.00/set of 3# FR08

R&M, lollipop top bearing race………………………………………$85.00 ea.# RMBR1

R&M, oil cup for List #1404………………………………………….$30.00 ea.# RMOC1

R&M, Gearback Tank osc. wheel, steel (this is the one w/ the

spring tensioner)……………………………………………..$60.00 ea.#RMDS2

R&M, Gearback Tank osc. wheel drive shaft, (spring tension model)$60.00 ea.# RMDS1

R&M, Tank motor grease cup w/ plunger, brass, mounts above shaft$42.00 ea.# RMGC1

R&M, Gearback Tank osc. adjusting thumb wheel for osc. engagement$20.00 ea.# RMTW1

R&M, screw in grommet for tank motor, large………………………$6.00 ea.# RMSG1

R&M, screw in grommet for tank motor, small…………………….$8.00 ea.# RMSG2

RotoBeam, Yoke Thumbnut (holds cage upright), polished alum.$50.00 ea.#RBYT1

Sami, cannonball motor, brush inspection plug, brass……………$95.00 pr.# SAM01

Sami, cannonball motor, yoke friction washer, brass……………$45.00 ea.# SAM02

Sami, cannonball motor, screw for bottom plate…………………$14.00 ea.# SAM03

Sami, cannonball motor, screw for cage to strut…………………$14.00 ea.# SAM04

SPRINGS: for Oil Cups, custom wound, many sizes in stock,

let me know make/model…………………………….……$10.00 ea.# SCWO

MISCELLANEOUS PARTS (cont.) PRICE ORDER #

Toledo, candy scale leveling screw, brass $50.00 ea.#TLS1

Trojan, all brass, oil cup, brass……………………………………$35.00 ea.#TOC01

Trojan, pancake bearing……………………………………………$35.00 ea. # TPCB1

Trojan, oil slingee, fits front snout of motor to catch oil, brass…$65.00 ea.# TPCS1

Tuerk, ceiling fan motor, grommet……………………………………$8.00 ea.# TCFG1

PLUGS, VINTAGE BAKELITE: Old style vintage, NOT REPROS ***Call for availability-supply is dwindling for some styles***

Note: I recently acquired a large supply of NOS bakelite plugs, still in the original box with the cardboard insulators. There are Eagle, General Electric, and Rodale brand plugs. My part number below for these plugs is #VP06. Please specify which brand you’d like if you have a preference when ordering #VP06.

Bakelite, black, half sphere, no neck, fluted or smooth………$call or email # VP01

Bakelite, brown, round w/ flared neck…………………………$sold out # VP02

Bakelite, brown, flat tee shape w/ straight neck……………….$ sold out. # VP03

Bakelite, ivory, flat tee shape w/ straight neck……………………$ sold out. # VP04

Rubber, black, heater type w/ straight neck………………………$ sold out. # VP05

Bakelite, brown, 1/2 sphere w/ scalloped or fluted sides, NOS $8.00 ea.# VP06

Bakelite, ivory, flared neck……………………………………………..$ sold out.# VP07

Bakelite, ivory, flat, no neck……………………………………………$ sold out.# VP08

Bakelite, brown, flat tee shape w/ flared neck………………………$ sold out.# VP09

Bakelite, ivory, flat tee shape w/ flared neck…………………………..$ sold out.# VP10

Bakelite, brown, flat, no neck………………………………………….$ sold out.# VP11

Bakelite, ivory, 1/2 sphere w/ scalloped sides, no neck, NOS……..$ sold out.# VP12

Porcelain, prongs turned “inline” (these fit some of the early screw in

attaching plugs)…………………………………………….$sold out# VP13

MISCELLANEOUS PARTS (cont.) PRICE ORDER #

Veritys, ball motor osc., rear bearing, for “The Orbit” 16” osc……$40.00 ea.# VBE01

Veritys, ball motor osc., front bearing, for “The Orbit” 16” osc…$40.00 ea.# VBE02

Western Electric, all brass oil cup…………………………………$35.00 ea.# WEOC2

Western Electric, all brass oil cup holder…………………………$40.00 ea.# WHOC3

Western Electric, all brass oiler complete w/ wick………………$100.00 ea.# WHOC4

Western Electric, Bi polar oil cup, brass…………………………$35.00 ea.# WEOC1

Western Electric, bi polar rear bearing cap, brass………………$35.00 ea.# WERBC

Western Electric, bi polar strut screw, threaded ends w/ hex $24.00 ea. # WESS1

Western Electric, bi polar strut screw cap, slotted....................$11.00 ea. # WESS2

Western Electric, brush caps for tank motor……………………..$40.00/pr# RMBC1

Westinghouse, all brass brush caps……………………………….$24.00 pr. # WHBC1

Westinghouse, all brass brush holder/insulator…………………$50.00 ea.# WHBH2

Westinghouse, all brass oil cup……………………………………$30.00 ea.# WHOC2

Westinghouse, all brass oil cup holder……………………………$40.00 ea.# WHOC3

Westinghouse, all brass oiler complete w/ wick…………………$75.00 ea.# WHOC4

Westinghouse, dbl lever arm to neck shoulder screw, brass.....$20.00 ea.# WHSS5

Westinghouse, dbl lever arm to yoke shoulder screw, brass......$20.00 ea.# WHSS4

Westinghouse, brush caps for 10” Style #2728540 DC model…$24.00 pr.# WHBC4

Westinghouse, brush caps, for DC tank motor, polished brass..$50.00 pr.# WHBC5

Westinghouse, brush caps, for DC tank motor, no thread; pinned..$40/pr.# WHBC7

Westinghouse, cage clip screw for tank motor/dbl lever,………$15.00 ea.# WHS01

Westinghouse, dbl lever, wheel shoulder screw…………………$24.00 ea. # WHSS1

Westinghouse, dbl lever, arm shoulder screw…………………$20.00 ea. # WHSS2

Westinghouse, gyro, brush caps…………………………………$24.00 pr. # WHBC1

Westinghouse, gyro, brush holder assembly……………………$40.00 pr. # WHBH1

Westinghouse, pancake oiler, brass, complete w/ spring/wick$100.00 ea.# WHPC01

Westinghouse, pancake, bearing………………………………$45.00 ea.# WHPC02

Westinghouse, pancake vertical switch knob,.......................$40.00 ea.#WHPC03

Westinghouse, rear bearing cap for 1917 type osc., brass,

threaded & knurled………………………………$35.00 ea.# WHRB1

Westinghouse, Rotaire, geared ball detent shaft, steel w/ brass collar$145.00 ea.#WHRS1

Westinghouse, stamped steel motor end bell/stator screw, steel $15.00 ea.# WHSS3

Westinghouse, strut to motor screw for tank motor/dbl lever, choose

brass or steel………………………………….……$9.00 ea.# WHS02

Westinghouse, tank motor, acorn nut, brass, rounded version…$8.00 ea.# WHAN1

Westinghouse, tank motor oil cup, brass……………………..$30.00 ea.# WHOC1

Westinghouse, switch lever knob, tank motor, vane, dbl lever $35.00 ea.# WHSLK1

Westinghouse, switch cover (insulator), for tank motor, vane, dbl lever$15.00 ea.# WHSC1

Westinghouse, tank motor/vane screw-in grommet (large)…….$ 6.00 ea.# WHSG1

Westinghouse, tank motor/vane screw-in grommet (small)……$ 8.00 ea.# WHSG2

Westinghouse, tank motor/dbl lever yoke to motor shoulder screw brass$20.00 ea.# WHYS1

Westinghouse, vane osc., bushing, for vane rod bottom………$22.00 ea.# WHVB1

Westinghouse, vane osc., bushing, for cage top loop……………$22.00 ea.# WHVB2

Westinghouse, vane osc. brush caps……………………………$24.00 pr. # WHBC2

Westinghouse, vane osc., brush guide/insulator…………………$24.00 pr.# WHVB3

Westinghouse, vane Stops, 3 pc. Assy. (as orig.) steel & brass $120.00 pr.# WHVS1

Westinghouse, vane Stops, all one piece brass……………………$65.00 pr.# WHVS2

Westinghouse, Whirlwind brush caps, style 98926 B (1/2” head dia.)..$24.00 pr.# WHBC3

Westinghouse, Whirlwind brush caps (5/16” head dia.)…………$24.00/pr.# WHBC6

Westinghouse, Whirlwind oil cup, brass…………………………$30.00 ea.# WHOC5

White Cross (Lindstrom-Smith), oiler w/ nipple, brass…………$45.00 ea.# WCOC1

WICK MATERIAL:

White, 1/8" dia………………………………………………………….$3.50/ft. # WWM1

White, 3/16" dia………………………………………………………$4.00/ft. # WWM2

White, 1/4" dia……………………………………………………….$4.50/ft. # WWM3

MISCELLANEOUS PARTS (cont.) PRICEORDER #

Zeigler Electric Co., brush holder insulators, candlestick bipolar….$24.00 pr.# ZE01

Zeigler Electric Co., brush clamp terminal lug, candlestick bipolar..$22.00 ea.# ZE02

Zeigler Electric Co., power term. lug, brass, candlestick bipolar..$60.00 ea.# ZE03

Darryl Hudson

68 Bluegrass Drive, Aiken, SC 29803

(803) 649-6641

darryl@

Please complete the form below. Show Quantity, Description, Part number, and Price. Orders under $50.00 please add $8.30 for priority postage. Orders over $50.00 please add $15.00 for priority postage. Payment must accompany order in the form of a personal check, money order, or cash. No credit cards. No Paypal. Please make check payable to: Darryl Hudson, 68 Bluegrass Drive, Aiken, SC 29803. If you are not 100% satisfied with any of my products, please let me know and I will refund your money or swap it out, which ever you prefer. If you like my products please tell others about them. If you do not like my products please tell ME!

Thank You.

Qty |Description |Part No. | Price Each |Total $ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

Total for goods __________

Shipping Charges __________

Total for Order __________

Name: _____________________________________________________________

Address: ___________________________________________________________

City: ______________________________________________________________

State: __________________________Zip: ________________________________

Phone:_________________________Email:_______________________________

................
................

In order to avoid copyright disputes, this page is only a partial summary.

To fulfill the demand for quickly locating and searching documents.

It is intelligent file search solution for home and business.

Literature Lottery

To fulfill the demand for quickly locating and searching documents.

Related download

Related searches